| /* | |
| * Copyright 1997-2000 Marcus Meissner | |
| * Copyright 1998-2000 Lionel Ulmer | |
| * Copyright 2000-2001 TransGaming Technologies Inc. | |
| * Copyright 2006 Stefan Dösinger | |
| * Copyright 2008 Denver Gingerich | |
| * | |
| * This library is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU Lesser General Public | |
| * License as published by the Free Software Foundation; either | |
| * version 2.1 of the License, or (at your option) any later version. | |
| * | |
| * This library is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * Lesser General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU Lesser General Public | |
| * License along with this library; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA | |
| */ | |
| #include "config.h" | |
| #include "wine/port.h" | |
| #include "ddraw_private.h" | |
| WINE_DEFAULT_DEBUG_CHANNEL(ddraw); | |
| /* Device identifier. Don't relay it to WineD3D */ | |
| static const DDDEVICEIDENTIFIER2 deviceidentifier = | |
| { | |
| "display", | |
| "DirectDraw HAL", | |
| { { 0x00010001, 0x00010001 } }, | |
| 0, 0, 0, 0, | |
| /* a8373c10-7ac4-4deb-849a-009844d08b2d */ | |
| {0xa8373c10,0x7ac4,0x4deb, {0x84,0x9a,0x00,0x98,0x44,0xd0,0x8b,0x2d}}, | |
| 0 | |
| }; | |
| static void STDMETHODCALLTYPE ddraw_null_wined3d_object_destroyed(void *parent) {} | |
| const struct wined3d_parent_ops ddraw_null_wined3d_parent_ops = | |
| { | |
| ddraw_null_wined3d_object_destroyed, | |
| }; | |
| static inline IDirectDrawImpl *impl_from_IDirectDraw(IDirectDraw *iface) | |
| { | |
| return CONTAINING_RECORD(iface, IDirectDrawImpl, IDirectDraw_iface); | |
| } | |
| static inline IDirectDrawImpl *impl_from_IDirectDraw2(IDirectDraw2 *iface) | |
| { | |
| return CONTAINING_RECORD(iface, IDirectDrawImpl, IDirectDraw2_iface); | |
| } | |
| static inline IDirectDrawImpl *impl_from_IDirectDraw3(IDirectDraw3 *iface) | |
| { | |
| return CONTAINING_RECORD(iface, IDirectDrawImpl, IDirectDraw3_iface); | |
| } | |
| static inline IDirectDrawImpl *impl_from_IDirectDraw4(IDirectDraw4 *iface) | |
| { | |
| return CONTAINING_RECORD(iface, IDirectDrawImpl, IDirectDraw4_iface); | |
| } | |
| static inline IDirectDrawImpl *impl_from_IDirectDraw7(IDirectDraw7 *iface) | |
| { | |
| return CONTAINING_RECORD(iface, IDirectDrawImpl, IDirectDraw7_iface); | |
| } | |
| static inline IDirectDrawImpl *impl_from_IDirect3D(IDirect3D *iface) | |
| { | |
| return CONTAINING_RECORD(iface, IDirectDrawImpl, IDirect3D_iface); | |
| } | |
| static inline IDirectDrawImpl *impl_from_IDirect3D2(IDirect3D2 *iface) | |
| { | |
| return CONTAINING_RECORD(iface, IDirectDrawImpl, IDirect3D2_iface); | |
| } | |
| static inline IDirectDrawImpl *impl_from_IDirect3D3(IDirect3D3 *iface) | |
| { | |
| return CONTAINING_RECORD(iface, IDirectDrawImpl, IDirect3D3_iface); | |
| } | |
| static inline IDirectDrawImpl *impl_from_IDirect3D7(IDirect3D7 *iface) | |
| { | |
| return CONTAINING_RECORD(iface, IDirectDrawImpl, IDirect3D7_iface); | |
| } | |
| /***************************************************************************** | |
| * IUnknown Methods | |
| *****************************************************************************/ | |
| /***************************************************************************** | |
| * IDirectDraw7::QueryInterface | |
| * | |
| * Queries different interfaces of the DirectDraw object. It can return | |
| * IDirectDraw interfaces in version 1, 2, 4 and 7, and IDirect3D interfaces | |
| * in version 1, 2, 3 and 7. An IDirect3DDevice can be created with this | |
| * method. | |
| * The returned interface is AddRef()-ed before it's returned | |
| * | |
| * Used for version 1, 2, 4 and 7 | |
| * | |
| * Params: | |
| * refiid: Interface ID asked for | |
| * obj: Used to return the interface pointer | |
| * | |
| * Returns: | |
| * S_OK if an interface was found | |
| * E_NOINTERFACE if the requested interface wasn't found | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_QueryInterface(IDirectDraw7 *iface, REFIID refiid, void **obj) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| TRACE("iface %p, riid %s, object %p.\n", iface, debugstr_guid(refiid), obj); | |
| /* Can change surface impl type */ | |
| EnterCriticalSection(&ddraw_cs); | |
| /* According to COM docs, if the QueryInterface fails, obj should be set to NULL */ | |
| *obj = NULL; | |
| if(!refiid) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| /* Check DirectDraw Interfaces */ | |
| if ( IsEqualGUID( &IID_IUnknown, refiid ) || | |
| IsEqualGUID( &IID_IDirectDraw7, refiid ) ) | |
| { | |
| *obj = This; | |
| TRACE("(%p) Returning IDirectDraw7 interface at %p\n", This, *obj); | |
| } | |
| else if ( IsEqualGUID( &IID_IDirectDraw4, refiid ) ) | |
| { | |
| *obj = &This->IDirectDraw4_iface; | |
| TRACE("(%p) Returning IDirectDraw4 interface at %p\n", This, *obj); | |
| } | |
| else if ( IsEqualGUID( &IID_IDirectDraw3, refiid ) ) | |
| { | |
| /* This Interface exists in ddrawex.dll, it is implemented in a wrapper */ | |
| WARN("IDirectDraw3 is not valid in ddraw.dll\n"); | |
| *obj = NULL; | |
| LeaveCriticalSection(&ddraw_cs); | |
| return E_NOINTERFACE; | |
| } | |
| else if ( IsEqualGUID( &IID_IDirectDraw2, refiid ) ) | |
| { | |
| *obj = &This->IDirectDraw2_iface; | |
| TRACE("(%p) Returning IDirectDraw2 interface at %p\n", This, *obj); | |
| } | |
| else if ( IsEqualGUID( &IID_IDirectDraw, refiid ) ) | |
| { | |
| *obj = &This->IDirectDraw_iface; | |
| TRACE("(%p) Returning IDirectDraw interface at %p\n", This, *obj); | |
| } | |
| /* Direct3D | |
| * The refcount unit test revealed that an IDirect3D7 interface can only be queried | |
| * from a DirectDraw object that was created as an IDirectDraw7 interface. No idea | |
| * who had this idea and why. The older interfaces can query and IDirect3D version | |
| * because they are all created as IDirectDraw(1). This isn't really crucial behavior, | |
| * and messy to implement with the common creation function, so it has been left out here. | |
| */ | |
| else if ( IsEqualGUID( &IID_IDirect3D , refiid ) || | |
| IsEqualGUID( &IID_IDirect3D2 , refiid ) || | |
| IsEqualGUID( &IID_IDirect3D3 , refiid ) || | |
| IsEqualGUID( &IID_IDirect3D7 , refiid ) ) | |
| { | |
| /* Check the surface implementation */ | |
| if(This->ImplType == SURFACE_UNKNOWN) | |
| { | |
| /* Apps may create the IDirect3D Interface before the primary surface. | |
| * set the surface implementation */ | |
| This->ImplType = SURFACE_OPENGL; | |
| TRACE("(%p) Choosing OpenGL surfaces because a Direct3D interface was requested\n", This); | |
| } | |
| else if(This->ImplType != SURFACE_OPENGL && DefaultSurfaceType == SURFACE_UNKNOWN) | |
| { | |
| ERR("(%p) The App is requesting a D3D device, but a non-OpenGL surface type was choosen. Prepare for trouble!\n", This); | |
| ERR(" (%p) You may want to contact wine-devel for help\n", This); | |
| /* Should I assert(0) here??? */ | |
| } | |
| else if(This->ImplType != SURFACE_OPENGL) | |
| { | |
| WARN("The app requests a Direct3D interface, but non-opengl surfaces where set in winecfg\n"); | |
| /* Do not abort here, only reject 3D Device creation */ | |
| } | |
| if ( IsEqualGUID( &IID_IDirect3D , refiid ) ) | |
| { | |
| This->d3dversion = 1; | |
| *obj = &This->IDirect3D_iface; | |
| TRACE(" returning Direct3D interface at %p.\n", *obj); | |
| } | |
| else if ( IsEqualGUID( &IID_IDirect3D2 , refiid ) ) | |
| { | |
| This->d3dversion = 2; | |
| *obj = &This->IDirect3D2_iface; | |
| TRACE(" returning Direct3D2 interface at %p.\n", *obj); | |
| } | |
| else if ( IsEqualGUID( &IID_IDirect3D3 , refiid ) ) | |
| { | |
| This->d3dversion = 3; | |
| *obj = &This->IDirect3D3_iface; | |
| TRACE(" returning Direct3D3 interface at %p.\n", *obj); | |
| } | |
| else if(IsEqualGUID( &IID_IDirect3D7 , refiid )) | |
| { | |
| This->d3dversion = 7; | |
| *obj = &This->IDirect3D7_iface; | |
| TRACE(" returning Direct3D7 interface at %p.\n", *obj); | |
| } | |
| } | |
| else if (IsEqualGUID(refiid, &IID_IWineD3DDeviceParent)) | |
| { | |
| *obj = &This->device_parent_vtbl; | |
| } | |
| /* Unknown interface */ | |
| else | |
| { | |
| ERR("(%p)->(%s, %p): No interface found\n", This, debugstr_guid(refiid), obj); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return E_NOINTERFACE; | |
| } | |
| IUnknown_AddRef( (IUnknown *) *obj ); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return S_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_QueryInterface(IDirectDraw4 *iface, REFIID riid, void **object) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, riid %s, object %p.\n", iface, debugstr_guid(riid), object); | |
| return ddraw7_QueryInterface(&This->IDirectDraw7_iface, riid, object); | |
| } | |
| static HRESULT WINAPI ddraw3_QueryInterface(IDirectDraw3 *iface, REFIID riid, void **object) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, riid %s, object %p.\n", iface, debugstr_guid(riid), object); | |
| return ddraw7_QueryInterface(&This->IDirectDraw7_iface, riid, object); | |
| } | |
| static HRESULT WINAPI ddraw2_QueryInterface(IDirectDraw2 *iface, REFIID riid, void **object) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, riid %s, object %p.\n", iface, debugstr_guid(riid), object); | |
| return ddraw7_QueryInterface(&This->IDirectDraw7_iface, riid, object); | |
| } | |
| static HRESULT WINAPI ddraw1_QueryInterface(IDirectDraw *iface, REFIID riid, void **object) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, riid %s, object %p.\n", iface, debugstr_guid(riid), object); | |
| return ddraw7_QueryInterface(&This->IDirectDraw7_iface, riid, object); | |
| } | |
| static HRESULT WINAPI d3d7_QueryInterface(IDirect3D7 *iface, REFIID riid, void **object) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D7(iface); | |
| TRACE("iface %p, riid %s, object %p.\n", iface, debugstr_guid(riid), object); | |
| return ddraw7_QueryInterface(&This->IDirectDraw7_iface, riid, object); | |
| } | |
| static HRESULT WINAPI d3d3_QueryInterface(IDirect3D3 *iface, REFIID riid, void **object) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| TRACE("iface %p, riid %s, object %p.\n", iface, debugstr_guid(riid), object); | |
| return ddraw7_QueryInterface(&This->IDirectDraw7_iface, riid, object); | |
| } | |
| static HRESULT WINAPI d3d2_QueryInterface(IDirect3D2 *iface, REFIID riid, void **object) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D2(iface); | |
| TRACE("iface %p, riid %s, object %p.\n", iface, debugstr_guid(riid), object); | |
| return ddraw7_QueryInterface(&This->IDirectDraw7_iface, riid, object); | |
| } | |
| static HRESULT WINAPI d3d1_QueryInterface(IDirect3D *iface, REFIID riid, void **object) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D(iface); | |
| TRACE("iface %p, riid %s, object %p.\n", iface, debugstr_guid(riid), object); | |
| return ddraw7_QueryInterface(&This->IDirectDraw7_iface, riid, object); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::AddRef | |
| * | |
| * Increases the interfaces refcount, basically | |
| * | |
| * DDraw refcounting is a bit tricky. The different DirectDraw interface | |
| * versions have individual refcounts, but the IDirect3D interfaces do not. | |
| * All interfaces are from one object, that means calling QueryInterface on an | |
| * IDirectDraw7 interface for an IDirectDraw4 interface does not create a new | |
| * IDirectDrawImpl object. | |
| * | |
| * That means all AddRef and Release implementations of IDirectDrawX work | |
| * with their own counter, and IDirect3DX::AddRef thunk to IDirectDraw (1), | |
| * except of IDirect3D7 which thunks to IDirectDraw7 | |
| * | |
| * Returns: The new refcount | |
| * | |
| *****************************************************************************/ | |
| static ULONG WINAPI ddraw7_AddRef(IDirectDraw7 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| ULONG ref = InterlockedIncrement(&This->ref7); | |
| TRACE("%p increasing refcount to %u.\n", This, ref); | |
| if(ref == 1) InterlockedIncrement(&This->numIfaces); | |
| return ref; | |
| } | |
| static ULONG WINAPI ddraw4_AddRef(IDirectDraw4 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| ULONG ref = InterlockedIncrement(&This->ref4); | |
| TRACE("%p increasing refcount to %u.\n", This, ref); | |
| if (ref == 1) InterlockedIncrement(&This->numIfaces); | |
| return ref; | |
| } | |
| static ULONG WINAPI ddraw3_AddRef(IDirectDraw3 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| ULONG ref = InterlockedIncrement(&This->ref3); | |
| TRACE("%p increasing refcount to %u.\n", This, ref); | |
| if (ref == 1) InterlockedIncrement(&This->numIfaces); | |
| return ref; | |
| } | |
| static ULONG WINAPI ddraw2_AddRef(IDirectDraw2 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| ULONG ref = InterlockedIncrement(&This->ref2); | |
| TRACE("%p increasing refcount to %u.\n", This, ref); | |
| if (ref == 1) InterlockedIncrement(&This->numIfaces); | |
| return ref; | |
| } | |
| static ULONG WINAPI ddraw1_AddRef(IDirectDraw *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| ULONG ref = InterlockedIncrement(&This->ref1); | |
| TRACE("%p increasing refcount to %u.\n", This, ref); | |
| if (ref == 1) InterlockedIncrement(&This->numIfaces); | |
| return ref; | |
| } | |
| static ULONG WINAPI d3d7_AddRef(IDirect3D7 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D7(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_AddRef(&This->IDirectDraw7_iface); | |
| } | |
| static ULONG WINAPI d3d3_AddRef(IDirect3D3 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw1_AddRef(&This->IDirectDraw_iface); | |
| } | |
| static ULONG WINAPI d3d2_AddRef(IDirect3D2 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D2(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw1_AddRef(&This->IDirectDraw_iface); | |
| } | |
| static ULONG WINAPI d3d1_AddRef(IDirect3D *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw1_AddRef(&This->IDirectDraw_iface); | |
| } | |
| /***************************************************************************** | |
| * ddraw_destroy | |
| * | |
| * Destroys a ddraw object if all refcounts are 0. This is to share code | |
| * between the IDirectDrawX::Release functions | |
| * | |
| * Params: | |
| * This: DirectDraw object to destroy | |
| * | |
| *****************************************************************************/ | |
| static void ddraw_destroy(IDirectDrawImpl *This) | |
| { | |
| IDirectDraw7_SetCooperativeLevel(&This->IDirectDraw7_iface, NULL, DDSCL_NORMAL); | |
| IDirectDraw7_RestoreDisplayMode(&This->IDirectDraw7_iface); | |
| /* Destroy the device window if we created one */ | |
| if(This->devicewindow != 0) | |
| { | |
| TRACE(" (%p) Destroying the device window %p\n", This, This->devicewindow); | |
| DestroyWindow(This->devicewindow); | |
| This->devicewindow = 0; | |
| } | |
| EnterCriticalSection(&ddraw_cs); | |
| list_remove(&This->ddraw_list_entry); | |
| LeaveCriticalSection(&ddraw_cs); | |
| /* Release the attached WineD3D stuff */ | |
| IWineD3DDevice_Release(This->wineD3DDevice); | |
| wined3d_decref(This->wineD3D); | |
| /* Now free the object */ | |
| HeapFree(GetProcessHeap(), 0, This); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::Release | |
| * | |
| * Decreases the refcount. If the refcount falls to 0, the object is destroyed | |
| * | |
| * Returns: The new refcount | |
| *****************************************************************************/ | |
| static ULONG WINAPI ddraw7_Release(IDirectDraw7 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| ULONG ref = InterlockedDecrement(&This->ref7); | |
| TRACE("%p decreasing refcount to %u.\n", This, ref); | |
| if (!ref && !InterlockedDecrement(&This->numIfaces)) | |
| ddraw_destroy(This); | |
| return ref; | |
| } | |
| static ULONG WINAPI ddraw4_Release(IDirectDraw4 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| ULONG ref = InterlockedDecrement(&This->ref4); | |
| TRACE("%p decreasing refcount to %u.\n", This, ref); | |
| if (!ref && !InterlockedDecrement(&This->numIfaces)) | |
| ddraw_destroy(This); | |
| return ref; | |
| } | |
| static ULONG WINAPI ddraw3_Release(IDirectDraw3 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| ULONG ref = InterlockedDecrement(&This->ref3); | |
| TRACE("%p decreasing refcount to %u.\n", This, ref); | |
| if (!ref && !InterlockedDecrement(&This->numIfaces)) | |
| ddraw_destroy(This); | |
| return ref; | |
| } | |
| static ULONG WINAPI ddraw2_Release(IDirectDraw2 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| ULONG ref = InterlockedDecrement(&This->ref2); | |
| TRACE("%p decreasing refcount to %u.\n", This, ref); | |
| if (!ref && !InterlockedDecrement(&This->numIfaces)) | |
| ddraw_destroy(This); | |
| return ref; | |
| } | |
| static ULONG WINAPI ddraw1_Release(IDirectDraw *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| ULONG ref = InterlockedDecrement(&This->ref1); | |
| TRACE("%p decreasing refcount to %u.\n", This, ref); | |
| if (!ref && !InterlockedDecrement(&This->numIfaces)) | |
| ddraw_destroy(This); | |
| return ref; | |
| } | |
| static ULONG WINAPI d3d7_Release(IDirect3D7 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D7(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_Release(&This->IDirectDraw7_iface); | |
| } | |
| static ULONG WINAPI d3d3_Release(IDirect3D3 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw1_Release(&This->IDirectDraw_iface); | |
| } | |
| static ULONG WINAPI d3d2_Release(IDirect3D2 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D2(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw1_Release(&This->IDirectDraw_iface); | |
| } | |
| static ULONG WINAPI d3d1_Release(IDirect3D *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw1_Release(&This->IDirectDraw_iface); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw methods | |
| *****************************************************************************/ | |
| /***************************************************************************** | |
| * IDirectDraw7::SetCooperativeLevel | |
| * | |
| * Sets the cooperative level for the DirectDraw object, and the window | |
| * assigned to it. The cooperative level determines the general behavior | |
| * of the DirectDraw application | |
| * | |
| * Warning: This is quite tricky, as it's not really documented which | |
| * cooperative levels can be combined with each other. If a game fails | |
| * after this function, try to check the cooperative levels passed on | |
| * Windows, and if it returns something different. | |
| * | |
| * If you think that this function caused the failure because it writes a | |
| * fixme, be sure to run again with a +ddraw trace. | |
| * | |
| * What is known about cooperative levels (See the ddraw modes test): | |
| * DDSCL_EXCLUSIVE and DDSCL_FULLSCREEN must be used with each other | |
| * DDSCL_NORMAL is not compatible with DDSCL_EXCLUSIVE or DDSCL_FULLSCREEN | |
| * DDSCL_SETFOCUSWINDOW can be passed only in DDSCL_NORMAL mode, but after that | |
| * DDSCL_FULLSCREEN can be activated | |
| * DDSCL_SETFOCUSWINDOW may only be used with DDSCL_NOWINDOWCHANGES | |
| * | |
| * Handled flags: DDSCL_NORMAL, DDSCL_FULLSCREEN, DDSCL_EXCLUSIVE, | |
| * DDSCL_SETFOCUSWINDOW (partially), | |
| * DDSCL_MULTITHREADED (work in progress) | |
| * | |
| * Unhandled flags, which should be implemented | |
| * DDSCL_SETDEVICEWINDOW: Sets a window specially used for rendering (I don't | |
| * expect any difference to a normal window for wine) | |
| * DDSCL_CREATEDEVICEWINDOW: Tells ddraw to create its own window for | |
| * rendering (Possible test case: Half-Life) | |
| * | |
| * Unsure about these: DDSCL_FPUSETUP DDSCL_FPURESERVE | |
| * | |
| * These don't seem very important for wine: | |
| * DDSCL_ALLOWREBOOT, DDSCL_NOWINDOWCHANGES, DDSCL_ALLOWMODEX | |
| * | |
| * Returns: | |
| * DD_OK if the cooperative level was set successfully | |
| * DDERR_INVALIDPARAMS if the passed cooperative level combination is invalid | |
| * DDERR_HWNDALREADYSET if DDSCL_SETFOCUSWINDOW is passed in exclusive mode | |
| * (Probably others too, have to investigate) | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_SetCooperativeLevel(IDirectDraw7 *iface, HWND hwnd, DWORD cooplevel) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| HWND window; | |
| TRACE("iface %p, window %p, flags %#x.\n", iface, hwnd, cooplevel); | |
| DDRAW_dump_cooperativelevel(cooplevel); | |
| EnterCriticalSection(&ddraw_cs); | |
| /* Get the old window */ | |
| window = This->dest_window; | |
| /* Tests suggest that we need one of them: */ | |
| if(!(cooplevel & (DDSCL_SETFOCUSWINDOW | | |
| DDSCL_NORMAL | | |
| DDSCL_EXCLUSIVE ))) | |
| { | |
| TRACE("Incorrect cooplevel flags, returning DDERR_INVALIDPARAMS\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| /* Handle those levels first which set various hwnds */ | |
| if(cooplevel & DDSCL_SETFOCUSWINDOW) | |
| { | |
| /* This isn't compatible with a lot of flags */ | |
| if(cooplevel & ( DDSCL_MULTITHREADED | | |
| DDSCL_CREATEDEVICEWINDOW | | |
| DDSCL_FPUSETUP | | |
| DDSCL_FPUPRESERVE | | |
| DDSCL_ALLOWREBOOT | | |
| DDSCL_ALLOWMODEX | | |
| DDSCL_SETDEVICEWINDOW | | |
| DDSCL_NORMAL | | |
| DDSCL_EXCLUSIVE | | |
| DDSCL_FULLSCREEN ) ) | |
| { | |
| TRACE("Called with incompatible flags, returning DDERR_INVALIDPARAMS\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| if( (This->cooperative_level & DDSCL_EXCLUSIVE) && window ) | |
| { | |
| TRACE("Setting DDSCL_SETFOCUSWINDOW with an already set window, returning DDERR_HWNDALREADYSET\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_HWNDALREADYSET; | |
| } | |
| This->focuswindow = hwnd; | |
| /* Won't use the hwnd param for anything else */ | |
| hwnd = NULL; | |
| /* Use the focus window for drawing too */ | |
| This->dest_window = This->focuswindow; | |
| /* Destroy the device window, if we have one */ | |
| if(This->devicewindow) | |
| { | |
| DestroyWindow(This->devicewindow); | |
| This->devicewindow = NULL; | |
| } | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| if(cooplevel & DDSCL_EXCLUSIVE) | |
| { | |
| if( !(cooplevel & DDSCL_FULLSCREEN) || !hwnd ) | |
| { | |
| TRACE("(%p) DDSCL_EXCLUSIVE needs DDSCL_FULLSCREEN and a window\n", This); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| } | |
| else if( !(cooplevel & DDSCL_NORMAL) ) | |
| { | |
| TRACE("(%p) SetCooperativeLevel needs at least SetFocusWindow or Exclusive or Normal mode\n", This); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| if ((This->cooperative_level & DDSCL_EXCLUSIVE) | |
| && (hwnd != window || !(cooplevel & DDSCL_EXCLUSIVE))) | |
| IWineD3DDevice_ReleaseFocusWindow(This->wineD3DDevice); | |
| if ((cooplevel & DDSCL_FULLSCREEN) != (This->cooperative_level & DDSCL_FULLSCREEN) || hwnd != window) | |
| { | |
| if (This->cooperative_level & DDSCL_FULLSCREEN) | |
| { | |
| IWineD3DDevice_RestoreFullscreenWindow(This->wineD3DDevice, window); | |
| } | |
| if (cooplevel & DDSCL_FULLSCREEN) | |
| { | |
| WINED3DDISPLAYMODE display_mode; | |
| wined3d_get_adapter_display_mode(This->wineD3D, WINED3DADAPTER_DEFAULT, &display_mode); | |
| IWineD3DDevice_SetupFullscreenWindow(This->wineD3DDevice, hwnd, display_mode.Width, display_mode.Height); | |
| } | |
| } | |
| if ((cooplevel & DDSCL_EXCLUSIVE) | |
| && (hwnd != window || !(This->cooperative_level & DDSCL_EXCLUSIVE))) | |
| { | |
| HRESULT hr = IWineD3DDevice_AcquireFocusWindow(This->wineD3DDevice, hwnd); | |
| if (FAILED(hr)) | |
| { | |
| ERR("Failed to acquire focus window, hr %#x.\n", hr); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| } | |
| /* Don't override focus windows or private device windows */ | |
| if (hwnd && !This->focuswindow && !This->devicewindow && (hwnd != window)) | |
| This->dest_window = hwnd; | |
| if(cooplevel & DDSCL_CREATEDEVICEWINDOW) | |
| { | |
| /* Don't create a device window if a focus window is set */ | |
| if( !(This->focuswindow) ) | |
| { | |
| HWND devicewindow = CreateWindowExA(0, DDRAW_WINDOW_CLASS_NAME, "DDraw device window", | |
| WS_POPUP, 0, 0, GetSystemMetrics(SM_CXSCREEN), GetSystemMetrics(SM_CYSCREEN), | |
| NULL, NULL, NULL, NULL); | |
| if (!devicewindow) | |
| { | |
| ERR("Failed to create window, last error %#x.\n", GetLastError()); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return E_FAIL; | |
| } | |
| ShowWindow(devicewindow, SW_SHOW); /* Just to be sure */ | |
| TRACE("(%p) Created a DDraw device window. HWND=%p\n", This, devicewindow); | |
| This->devicewindow = devicewindow; | |
| This->dest_window = devicewindow; | |
| } | |
| } | |
| if(cooplevel & DDSCL_MULTITHREADED && !(This->cooperative_level & DDSCL_MULTITHREADED)) | |
| { | |
| /* Enable thread safety in wined3d */ | |
| IWineD3DDevice_SetMultithreaded(This->wineD3DDevice); | |
| } | |
| /* Unhandled flags */ | |
| if(cooplevel & DDSCL_ALLOWREBOOT) | |
| WARN("(%p) Unhandled flag DDSCL_ALLOWREBOOT, harmless\n", This); | |
| if(cooplevel & DDSCL_ALLOWMODEX) | |
| WARN("(%p) Unhandled flag DDSCL_ALLOWMODEX, harmless\n", This); | |
| if(cooplevel & DDSCL_FPUSETUP) | |
| WARN("(%p) Unhandled flag DDSCL_FPUSETUP, harmless\n", This); | |
| /* Store the cooperative_level */ | |
| This->cooperative_level = cooplevel; | |
| TRACE("SetCooperativeLevel retuning DD_OK\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_SetCooperativeLevel(IDirectDraw4 *iface, HWND window, DWORD flags) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, window %p, flags %#x.\n", iface, window, flags); | |
| return ddraw7_SetCooperativeLevel(&This->IDirectDraw7_iface, window, flags); | |
| } | |
| static HRESULT WINAPI ddraw3_SetCooperativeLevel(IDirectDraw3 *iface, HWND window, DWORD flags) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, window %p, flags %#x.\n", iface, window, flags); | |
| return ddraw7_SetCooperativeLevel(&This->IDirectDraw7_iface, window, flags); | |
| } | |
| static HRESULT WINAPI ddraw2_SetCooperativeLevel(IDirectDraw2 *iface, HWND window, DWORD flags) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, window %p, flags %#x.\n", iface, window, flags); | |
| return ddraw7_SetCooperativeLevel(&This->IDirectDraw7_iface, window, flags); | |
| } | |
| static HRESULT WINAPI ddraw1_SetCooperativeLevel(IDirectDraw *iface, HWND window, DWORD flags) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, window %p, flags %#x.\n", iface, window, flags); | |
| return ddraw7_SetCooperativeLevel(&This->IDirectDraw7_iface, window, flags); | |
| } | |
| /***************************************************************************** | |
| * | |
| * Helper function for SetDisplayMode and RestoreDisplayMode | |
| * | |
| * Implements DirectDraw's SetDisplayMode, but ignores the value of | |
| * ForceRefreshRate, since it is already handled by | |
| * ddraw7_SetDisplayMode. RestoreDisplayMode can use this function | |
| * without worrying that ForceRefreshRate will override the refresh rate. For | |
| * argument and return value documentation, see | |
| * ddraw7_SetDisplayMode. | |
| * | |
| *****************************************************************************/ | |
| static HRESULT ddraw_set_display_mode(IDirectDrawImpl *ddraw, DWORD Width, DWORD Height, | |
| DWORD BPP, DWORD RefreshRate, DWORD Flags) | |
| { | |
| WINED3DDISPLAYMODE Mode; | |
| HRESULT hr; | |
| TRACE("ddraw %p, width %u, height %u, bpp %u, refresh_rate %u, flags %#x.\n", ddraw, Width, | |
| Height, BPP, RefreshRate, Flags); | |
| EnterCriticalSection(&ddraw_cs); | |
| if( !Width || !Height ) | |
| { | |
| ERR("Width %u, Height %u, what to do?\n", Width, Height); | |
| /* It looks like Need for Speed Porsche Unleashed expects DD_OK here */ | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| /* Check the exclusive mode | |
| if(!(ddraw->cooperative_level & DDSCL_EXCLUSIVE)) | |
| return DDERR_NOEXCLUSIVEMODE; | |
| * This is WRONG. Don't know if the SDK is completely | |
| * wrong and if there are any conditions when DDERR_NOEXCLUSIVE | |
| * is returned, but Half-Life 1.1.1.1 (Steam version) | |
| * depends on this | |
| */ | |
| Mode.Width = Width; | |
| Mode.Height = Height; | |
| Mode.RefreshRate = RefreshRate; | |
| switch(BPP) | |
| { | |
| case 8: Mode.Format = WINED3DFMT_P8_UINT; break; | |
| case 15: Mode.Format = WINED3DFMT_B5G5R5X1_UNORM; break; | |
| case 16: Mode.Format = WINED3DFMT_B5G6R5_UNORM; break; | |
| case 24: Mode.Format = WINED3DFMT_B8G8R8_UNORM; break; | |
| case 32: Mode.Format = WINED3DFMT_B8G8R8X8_UNORM; break; | |
| } | |
| /* TODO: The possible return values from msdn suggest that | |
| * the screen mode can't be changed if a surface is locked | |
| * or some drawing is in progress | |
| */ | |
| /* TODO: Lose the primary surface */ | |
| hr = IWineD3DDevice_SetDisplayMode(ddraw->wineD3DDevice, 0, &Mode); | |
| IWineD3DDevice_RestoreFullscreenWindow(ddraw->wineD3DDevice, ddraw->dest_window); | |
| IWineD3DDevice_SetupFullscreenWindow(ddraw->wineD3DDevice, ddraw->dest_window, Width, Height); | |
| LeaveCriticalSection(&ddraw_cs); | |
| switch(hr) | |
| { | |
| case WINED3DERR_NOTAVAILABLE: return DDERR_UNSUPPORTED; | |
| default: return hr; | |
| } | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::SetDisplayMode | |
| * | |
| * Sets the display screen resolution, color depth and refresh frequency | |
| * when in fullscreen mode (in theory). | |
| * Possible return values listed in the SDK suggest that this method fails | |
| * when not in fullscreen mode, but this is wrong. Windows 2000 happily sets | |
| * the display mode in DDSCL_NORMAL mode without an hwnd specified. | |
| * It seems to be valid to pass 0 for With and Height, this has to be tested | |
| * It could mean that the current video mode should be left as-is. (But why | |
| * call it then?) | |
| * | |
| * Params: | |
| * Height, Width: Screen dimension | |
| * BPP: Color depth in Bits per pixel | |
| * Refreshrate: Screen refresh rate | |
| * Flags: Other stuff | |
| * | |
| * Returns | |
| * DD_OK on success | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_SetDisplayMode(IDirectDraw7 *iface, DWORD Width, DWORD Height, | |
| DWORD BPP, DWORD RefreshRate, DWORD Flags) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| TRACE("iface %p, width %u, height %u, bpp %u, refresh_rate %u, flags %#x.\n", | |
| iface, Width, Height, BPP, RefreshRate, Flags); | |
| if (force_refresh_rate != 0) | |
| { | |
| TRACE("ForceRefreshRate overriding passed-in refresh rate (%u Hz) to %u Hz\n", | |
| RefreshRate, force_refresh_rate); | |
| RefreshRate = force_refresh_rate; | |
| } | |
| return ddraw_set_display_mode(This, Width, Height, BPP, RefreshRate, Flags); | |
| } | |
| static HRESULT WINAPI ddraw4_SetDisplayMode(IDirectDraw4 *iface, DWORD width, DWORD height, | |
| DWORD bpp, DWORD refresh_rate, DWORD flags) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, width %u, height %u, bpp %u, refresh_rate %u, flags %#x.\n", | |
| iface, width, height, bpp, refresh_rate, flags); | |
| return ddraw7_SetDisplayMode(&This->IDirectDraw7_iface, width, height, bpp, refresh_rate, flags); | |
| } | |
| static HRESULT WINAPI ddraw3_SetDisplayMode(IDirectDraw3 *iface, DWORD width, DWORD height, | |
| DWORD bpp, DWORD refresh_rate, DWORD flags) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, width %u, height %u, bpp %u, refresh_rate %u, flags %#x.\n", | |
| iface, width, height, bpp, refresh_rate, flags); | |
| return ddraw7_SetDisplayMode(&This->IDirectDraw7_iface, width, height, bpp, refresh_rate, flags); | |
| } | |
| static HRESULT WINAPI ddraw2_SetDisplayMode(IDirectDraw2 *iface, | |
| DWORD width, DWORD height, DWORD bpp, DWORD refresh_rate, DWORD flags) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, width %u, height %u, bpp %u, refresh_rate %u, flags %#x.\n", | |
| iface, width, height, bpp, refresh_rate, flags); | |
| return ddraw7_SetDisplayMode(&This->IDirectDraw7_iface, width, height, bpp, refresh_rate, flags); | |
| } | |
| static HRESULT WINAPI ddraw1_SetDisplayMode(IDirectDraw *iface, DWORD width, DWORD height, DWORD bpp) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, width %u, height %u, bpp %u.\n", iface, width, height, bpp); | |
| return ddraw7_SetDisplayMode(&This->IDirectDraw7_iface, width, height, bpp, 0, 0); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::RestoreDisplayMode | |
| * | |
| * Restores the display mode to what it was at creation time. Basically. | |
| * | |
| * A problem arises when there are 2 DirectDraw objects using the same hwnd: | |
| * -> DD_1 finds the screen at 1400x1050x32 when created, sets it to 640x480x16 | |
| * -> DD_2 is created, finds the screen at 640x480x16, sets it to 1024x768x32 | |
| * -> DD_1 is released. The screen should be left at 1024x768x32. | |
| * -> DD_2 is released. The screen should be set to 1400x1050x32 | |
| * This case is unhandled right now, but Empire Earth does it this way. | |
| * (But perhaps there is something in SetCooperativeLevel to prevent this) | |
| * | |
| * The msdn says that this method resets the display mode to what it was before | |
| * SetDisplayMode was called. What if SetDisplayModes is called 2 times?? | |
| * | |
| * Returns | |
| * DD_OK on success | |
| * DDERR_NOEXCLUSIVE mode if the device isn't in fullscreen mode | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_RestoreDisplayMode(IDirectDraw7 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw_set_display_mode(This, This->orig_width, This->orig_height, This->orig_bpp, 0, 0); | |
| } | |
| static HRESULT WINAPI ddraw4_RestoreDisplayMode(IDirectDraw4 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_RestoreDisplayMode(&This->IDirectDraw7_iface); | |
| } | |
| static HRESULT WINAPI ddraw3_RestoreDisplayMode(IDirectDraw3 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_RestoreDisplayMode(&This->IDirectDraw7_iface); | |
| } | |
| static HRESULT WINAPI ddraw2_RestoreDisplayMode(IDirectDraw2 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_RestoreDisplayMode(&This->IDirectDraw7_iface); | |
| } | |
| static HRESULT WINAPI ddraw1_RestoreDisplayMode(IDirectDraw *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_RestoreDisplayMode(&This->IDirectDraw7_iface); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::GetCaps | |
| * | |
| * Returns the drives capabilities | |
| * | |
| * Used for version 1, 2, 4 and 7 | |
| * | |
| * Params: | |
| * DriverCaps: Structure to write the Hardware accelerated caps to | |
| * HelCaps: Structure to write the emulation caps to | |
| * | |
| * Returns | |
| * This implementation returns DD_OK only | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_GetCaps(IDirectDraw7 *iface, DDCAPS *DriverCaps, DDCAPS *HELCaps) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| DDCAPS caps; | |
| WINED3DCAPS winecaps; | |
| HRESULT hr; | |
| DDSCAPS2 ddscaps = {0, 0, 0, 0}; | |
| TRACE("iface %p, driver_caps %p, hel_caps %p.\n", iface, DriverCaps, HELCaps); | |
| /* One structure must be != NULL */ | |
| if( (!DriverCaps) && (!HELCaps) ) | |
| { | |
| ERR("(%p) Invalid params to ddraw7_GetCaps\n", This); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| memset(&caps, 0, sizeof(caps)); | |
| memset(&winecaps, 0, sizeof(winecaps)); | |
| caps.dwSize = sizeof(caps); | |
| EnterCriticalSection(&ddraw_cs); | |
| hr = IWineD3DDevice_GetDeviceCaps(This->wineD3DDevice, &winecaps); | |
| if(FAILED(hr)) { | |
| WARN("IWineD3DDevice::GetDeviceCaps failed\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| hr = IDirectDraw7_GetAvailableVidMem(iface, &ddscaps, &caps.dwVidMemTotal, &caps.dwVidMemFree); | |
| LeaveCriticalSection(&ddraw_cs); | |
| if(FAILED(hr)) { | |
| WARN("IDirectDraw7::GetAvailableVidMem failed\n"); | |
| return hr; | |
| } | |
| caps.dwCaps = winecaps.DirectDrawCaps.Caps; | |
| caps.dwCaps2 = winecaps.DirectDrawCaps.Caps2; | |
| caps.dwCKeyCaps = winecaps.DirectDrawCaps.CKeyCaps; | |
| caps.dwFXCaps = winecaps.DirectDrawCaps.FXCaps; | |
| caps.dwPalCaps = winecaps.DirectDrawCaps.PalCaps; | |
| caps.ddsCaps.dwCaps = winecaps.DirectDrawCaps.ddsCaps; | |
| caps.dwSVBCaps = winecaps.DirectDrawCaps.SVBCaps; | |
| caps.dwSVBCKeyCaps = winecaps.DirectDrawCaps.SVBCKeyCaps; | |
| caps.dwSVBFXCaps = winecaps.DirectDrawCaps.SVBFXCaps; | |
| caps.dwVSBCaps = winecaps.DirectDrawCaps.VSBCaps; | |
| caps.dwVSBCKeyCaps = winecaps.DirectDrawCaps.VSBCKeyCaps; | |
| caps.dwVSBFXCaps = winecaps.DirectDrawCaps.VSBFXCaps; | |
| caps.dwSSBCaps = winecaps.DirectDrawCaps.SSBCaps; | |
| caps.dwSSBCKeyCaps = winecaps.DirectDrawCaps.SSBCKeyCaps; | |
| caps.dwSSBFXCaps = winecaps.DirectDrawCaps.SSBFXCaps; | |
| /* Even if WineD3D supports 3D rendering, remove the cap if ddraw is configured | |
| * not to use it | |
| */ | |
| if(DefaultSurfaceType == SURFACE_GDI) { | |
| caps.dwCaps &= ~DDCAPS_3D; | |
| caps.ddsCaps.dwCaps &= ~(DDSCAPS_3DDEVICE | DDSCAPS_MIPMAP | DDSCAPS_TEXTURE | DDSCAPS_ZBUFFER); | |
| } | |
| if(winecaps.DirectDrawCaps.StrideAlign != 0) { | |
| caps.dwCaps |= DDCAPS_ALIGNSTRIDE; | |
| caps.dwAlignStrideAlign = winecaps.DirectDrawCaps.StrideAlign; | |
| } | |
| if(DriverCaps) | |
| { | |
| DD_STRUCT_COPY_BYSIZE(DriverCaps, &caps); | |
| if (TRACE_ON(ddraw)) | |
| { | |
| TRACE("Driver Caps :\n"); | |
| DDRAW_dump_DDCAPS(DriverCaps); | |
| } | |
| } | |
| if(HELCaps) | |
| { | |
| DD_STRUCT_COPY_BYSIZE(HELCaps, &caps); | |
| if (TRACE_ON(ddraw)) | |
| { | |
| TRACE("HEL Caps :\n"); | |
| DDRAW_dump_DDCAPS(HELCaps); | |
| } | |
| } | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_GetCaps(IDirectDraw4 *iface, DDCAPS *driver_caps, DDCAPS *hel_caps) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, driver_caps %p, hel_caps %p.\n", iface, driver_caps, hel_caps); | |
| return ddraw7_GetCaps(&This->IDirectDraw7_iface, driver_caps, hel_caps); | |
| } | |
| static HRESULT WINAPI ddraw3_GetCaps(IDirectDraw3 *iface, DDCAPS *driver_caps, DDCAPS *hel_caps) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, driver_caps %p, hel_caps %p.\n", iface, driver_caps, hel_caps); | |
| return ddraw7_GetCaps(&This->IDirectDraw7_iface, driver_caps, hel_caps); | |
| } | |
| static HRESULT WINAPI ddraw2_GetCaps(IDirectDraw2 *iface, DDCAPS *driver_caps, DDCAPS *hel_caps) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, driver_caps %p, hel_caps %p.\n", iface, driver_caps, hel_caps); | |
| return ddraw7_GetCaps(&This->IDirectDraw7_iface, driver_caps, hel_caps); | |
| } | |
| static HRESULT WINAPI ddraw1_GetCaps(IDirectDraw *iface, DDCAPS *driver_caps, DDCAPS *hel_caps) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, driver_caps %p, hel_caps %p.\n", iface, driver_caps, hel_caps); | |
| return ddraw7_GetCaps(&This->IDirectDraw7_iface, driver_caps, hel_caps); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::Compact | |
| * | |
| * No idea what it does, MSDN says it's not implemented. | |
| * | |
| * Returns | |
| * DD_OK, but this is unchecked | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_Compact(IDirectDraw7 *iface) | |
| { | |
| TRACE("iface %p.\n", iface); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_Compact(IDirectDraw4 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_Compact(&This->IDirectDraw7_iface); | |
| } | |
| static HRESULT WINAPI ddraw3_Compact(IDirectDraw3 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_Compact(&This->IDirectDraw7_iface); | |
| } | |
| static HRESULT WINAPI ddraw2_Compact(IDirectDraw2 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_Compact(&This->IDirectDraw7_iface); | |
| } | |
| static HRESULT WINAPI ddraw1_Compact(IDirectDraw *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_Compact(&This->IDirectDraw7_iface); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::GetDisplayMode | |
| * | |
| * Returns information about the current display mode | |
| * | |
| * Exists in Version 1, 2, 4 and 7 | |
| * | |
| * Params: | |
| * DDSD: Address of a surface description structure to write the info to | |
| * | |
| * Returns | |
| * DD_OK | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_GetDisplayMode(IDirectDraw7 *iface, DDSURFACEDESC2 *DDSD) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| HRESULT hr; | |
| WINED3DDISPLAYMODE Mode; | |
| DWORD Size; | |
| TRACE("iface %p, surface_desc %p.\n", iface, DDSD); | |
| EnterCriticalSection(&ddraw_cs); | |
| /* This seems sane */ | |
| if (!DDSD) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| /* The necessary members of LPDDSURFACEDESC and LPDDSURFACEDESC2 are equal, | |
| * so one method can be used for all versions (Hopefully) | |
| */ | |
| hr = IWineD3DDevice_GetDisplayMode(This->wineD3DDevice, | |
| 0 /* swapchain 0 */, | |
| &Mode); | |
| if( hr != D3D_OK ) | |
| { | |
| ERR(" (%p) IWineD3DDevice::GetDisplayMode returned %08x\n", This, hr); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| Size = DDSD->dwSize; | |
| memset(DDSD, 0, Size); | |
| DDSD->dwSize = Size; | |
| DDSD->dwFlags |= DDSD_HEIGHT | DDSD_WIDTH | DDSD_PIXELFORMAT | DDSD_PITCH | DDSD_REFRESHRATE; | |
| DDSD->dwWidth = Mode.Width; | |
| DDSD->dwHeight = Mode.Height; | |
| DDSD->u2.dwRefreshRate = 60; | |
| DDSD->ddsCaps.dwCaps = 0; | |
| DDSD->u4.ddpfPixelFormat.dwSize = sizeof(DDSD->u4.ddpfPixelFormat); | |
| PixelFormat_WineD3DtoDD(&DDSD->u4.ddpfPixelFormat, Mode.Format); | |
| DDSD->u1.lPitch = Mode.Width * DDSD->u4.ddpfPixelFormat.u1.dwRGBBitCount / 8; | |
| if(TRACE_ON(ddraw)) | |
| { | |
| TRACE("Returning surface desc :\n"); | |
| DDRAW_dump_surface_desc(DDSD); | |
| } | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_GetDisplayMode(IDirectDraw4 *iface, DDSURFACEDESC2 *surface_desc) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, surface_desc %p.\n", iface, surface_desc); | |
| return ddraw7_GetDisplayMode(&This->IDirectDraw7_iface, surface_desc); | |
| } | |
| static HRESULT WINAPI ddraw3_GetDisplayMode(IDirectDraw3 *iface, DDSURFACEDESC *surface_desc) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, surface_desc %p.\n", iface, surface_desc); | |
| return ddraw7_GetDisplayMode(&This->IDirectDraw7_iface, (DDSURFACEDESC2 *)surface_desc); | |
| } | |
| static HRESULT WINAPI ddraw2_GetDisplayMode(IDirectDraw2 *iface, DDSURFACEDESC *surface_desc) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, surface_desc %p.\n", iface, surface_desc); | |
| return ddraw7_GetDisplayMode(&This->IDirectDraw7_iface, (DDSURFACEDESC2 *)surface_desc); | |
| } | |
| static HRESULT WINAPI ddraw1_GetDisplayMode(IDirectDraw *iface, DDSURFACEDESC *surface_desc) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, surface_desc %p.\n", iface, surface_desc); | |
| return ddraw7_GetDisplayMode(&This->IDirectDraw7_iface, (DDSURFACEDESC2 *)surface_desc); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::GetFourCCCodes | |
| * | |
| * Returns an array of supported FourCC codes. | |
| * | |
| * Exists in Version 1, 2, 4 and 7 | |
| * | |
| * Params: | |
| * NumCodes: Contains the number of Codes that Codes can carry. Returns the number | |
| * of enumerated codes | |
| * Codes: Pointer to an array of DWORDs where the supported codes are written | |
| * to | |
| * | |
| * Returns | |
| * Always returns DD_OK, as it's a stub for now | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_GetFourCCCodes(IDirectDraw7 *iface, DWORD *NumCodes, DWORD *Codes) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| static const enum wined3d_format_id formats[] = | |
| { | |
| WINED3DFMT_YUY2, WINED3DFMT_UYVY, WINED3DFMT_YV12, | |
| WINED3DFMT_DXT1, WINED3DFMT_DXT2, WINED3DFMT_DXT3, WINED3DFMT_DXT4, WINED3DFMT_DXT5, | |
| WINED3DFMT_ATI2N, WINED3DFMT_NVHU, WINED3DFMT_NVHS | |
| }; | |
| DWORD count = 0, i, outsize; | |
| HRESULT hr; | |
| WINED3DDISPLAYMODE d3ddm; | |
| WINED3DSURFTYPE type = This->ImplType; | |
| TRACE("iface %p, codes_count %p, codes %p.\n", iface, NumCodes, Codes); | |
| IWineD3DDevice_GetDisplayMode(This->wineD3DDevice, | |
| 0 /* swapchain 0 */, | |
| &d3ddm); | |
| outsize = NumCodes && Codes ? *NumCodes : 0; | |
| if(type == SURFACE_UNKNOWN) type = SURFACE_GDI; | |
| for (i = 0; i < (sizeof(formats) / sizeof(formats[0])); ++i) | |
| { | |
| hr = wined3d_check_device_format(This->wineD3D, WINED3DADAPTER_DEFAULT, WINED3DDEVTYPE_HAL, | |
| d3ddm.Format, 0, WINED3DRTYPE_SURFACE, formats[i], type); | |
| if (SUCCEEDED(hr)) | |
| { | |
| if (count < outsize) | |
| Codes[count] = formats[i]; | |
| ++count; | |
| } | |
| } | |
| if(NumCodes) { | |
| TRACE("Returning %u FourCC codes\n", count); | |
| *NumCodes = count; | |
| } | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_GetFourCCCodes(IDirectDraw4 *iface, DWORD *codes_count, DWORD *codes) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, codes_count %p, codes %p.\n", iface, codes_count, codes); | |
| return ddraw7_GetFourCCCodes(&This->IDirectDraw7_iface, codes_count, codes); | |
| } | |
| static HRESULT WINAPI ddraw3_GetFourCCCodes(IDirectDraw3 *iface, DWORD *codes_count, DWORD *codes) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, codes_count %p, codes %p.\n", iface, codes_count, codes); | |
| return ddraw7_GetFourCCCodes(&This->IDirectDraw7_iface, codes_count, codes); | |
| } | |
| static HRESULT WINAPI ddraw2_GetFourCCCodes(IDirectDraw2 *iface, DWORD *codes_count, DWORD *codes) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, codes_count %p, codes %p.\n", iface, codes_count, codes); | |
| return ddraw7_GetFourCCCodes(&This->IDirectDraw7_iface, codes_count, codes); | |
| } | |
| static HRESULT WINAPI ddraw1_GetFourCCCodes(IDirectDraw *iface, DWORD *codes_count, DWORD *codes) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, codes_count %p, codes %p.\n", iface, codes_count, codes); | |
| return ddraw7_GetFourCCCodes(&This->IDirectDraw7_iface, codes_count, codes); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::GetMonitorFrequency | |
| * | |
| * Returns the monitor's frequency | |
| * | |
| * Exists in Version 1, 2, 4 and 7 | |
| * | |
| * Params: | |
| * Freq: Pointer to a DWORD to write the frequency to | |
| * | |
| * Returns | |
| * Always returns DD_OK | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_GetMonitorFrequency(IDirectDraw7 *iface, DWORD *Freq) | |
| { | |
| FIXME("iface %p, frequency %p stub!\n", iface, Freq); | |
| /* Ideally this should be in WineD3D, as it concerns the screen setup, | |
| * but for now this should make the games happy | |
| */ | |
| *Freq = 60; | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_GetMonitorFrequency(IDirectDraw4 *iface, DWORD *frequency) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, frequency %p.\n", iface, frequency); | |
| return ddraw7_GetMonitorFrequency(&This->IDirectDraw7_iface, frequency); | |
| } | |
| static HRESULT WINAPI ddraw3_GetMonitorFrequency(IDirectDraw3 *iface, DWORD *frequency) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, frequency %p.\n", iface, frequency); | |
| return ddraw7_GetMonitorFrequency(&This->IDirectDraw7_iface, frequency); | |
| } | |
| static HRESULT WINAPI ddraw2_GetMonitorFrequency(IDirectDraw2 *iface, DWORD *frequency) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, frequency %p.\n", iface, frequency); | |
| return ddraw7_GetMonitorFrequency(&This->IDirectDraw7_iface, frequency); | |
| } | |
| static HRESULT WINAPI ddraw1_GetMonitorFrequency(IDirectDraw *iface, DWORD *frequency) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, frequency %p.\n", iface, frequency); | |
| return ddraw7_GetMonitorFrequency(&This->IDirectDraw7_iface, frequency); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::GetVerticalBlankStatus | |
| * | |
| * Returns the Vertical blank status of the monitor. This should be in WineD3D | |
| * too basically, but as it's a semi stub, I didn't create a function there | |
| * | |
| * Params: | |
| * status: Pointer to a BOOL to be filled with the vertical blank status | |
| * | |
| * Returns | |
| * DD_OK on success | |
| * DDERR_INVALIDPARAMS if status is NULL | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_GetVerticalBlankStatus(IDirectDraw7 *iface, BOOL *status) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| TRACE("iface %p, status %p.\n", iface, status); | |
| /* This looks sane, the MSDN suggests it too */ | |
| EnterCriticalSection(&ddraw_cs); | |
| if(!status) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| *status = This->fake_vblank; | |
| This->fake_vblank = !This->fake_vblank; | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_GetVerticalBlankStatus(IDirectDraw4 *iface, BOOL *status) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, status %p.\n", iface, status); | |
| return ddraw7_GetVerticalBlankStatus(&This->IDirectDraw7_iface, status); | |
| } | |
| static HRESULT WINAPI ddraw3_GetVerticalBlankStatus(IDirectDraw3 *iface, BOOL *status) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, status %p.\n", iface, status); | |
| return ddraw7_GetVerticalBlankStatus(&This->IDirectDraw7_iface, status); | |
| } | |
| static HRESULT WINAPI ddraw2_GetVerticalBlankStatus(IDirectDraw2 *iface, BOOL *status) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, status %p.\n", iface, status); | |
| return ddraw7_GetVerticalBlankStatus(&This->IDirectDraw7_iface, status); | |
| } | |
| static HRESULT WINAPI ddraw1_GetVerticalBlankStatus(IDirectDraw *iface, BOOL *status) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, status %p.\n", iface, status); | |
| return ddraw7_GetVerticalBlankStatus(&This->IDirectDraw7_iface, status); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::GetAvailableVidMem | |
| * | |
| * Returns the total and free video memory | |
| * | |
| * Params: | |
| * Caps: Specifies the memory type asked for | |
| * total: Pointer to a DWORD to be filled with the total memory | |
| * free: Pointer to a DWORD to be filled with the free memory | |
| * | |
| * Returns | |
| * DD_OK on success | |
| * DDERR_INVALIDPARAMS of free and total are NULL | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_GetAvailableVidMem(IDirectDraw7 *iface, DDSCAPS2 *Caps, DWORD *total, | |
| DWORD *free) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| TRACE("iface %p, caps %p, total %p, free %p.\n", iface, Caps, total, free); | |
| if(TRACE_ON(ddraw)) | |
| { | |
| TRACE("(%p) Asked for memory with description: ", This); | |
| DDRAW_dump_DDSCAPS2(Caps); | |
| } | |
| EnterCriticalSection(&ddraw_cs); | |
| /* Todo: System memory vs local video memory vs non-local video memory | |
| * The MSDN also mentions differences between texture memory and other | |
| * resources, but that's not important | |
| */ | |
| if( (!total) && (!free) ) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| if(total) *total = This->total_vidmem; | |
| if(free) *free = IWineD3DDevice_GetAvailableTextureMem(This->wineD3DDevice); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_GetAvailableVidMem(IDirectDraw4 *iface, | |
| DDSCAPS2 *caps, DWORD *total, DWORD *free) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, caps %p, total %p, free %p.\n", iface, caps, total, free); | |
| return ddraw7_GetAvailableVidMem(&This->IDirectDraw7_iface, caps, total, free); | |
| } | |
| static HRESULT WINAPI ddraw3_GetAvailableVidMem(IDirectDraw3 *iface, DDSCAPS *caps, DWORD *total, | |
| DWORD *free) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| DDSCAPS2 caps2; | |
| TRACE("iface %p, caps %p, total %p, free %p.\n", iface, caps, total, free); | |
| DDRAW_Convert_DDSCAPS_1_To_2(caps, &caps2); | |
| return ddraw7_GetAvailableVidMem(&This->IDirectDraw7_iface, &caps2, total, free); | |
| } | |
| static HRESULT WINAPI ddraw2_GetAvailableVidMem(IDirectDraw2 *iface, | |
| DDSCAPS *caps, DWORD *total, DWORD *free) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| DDSCAPS2 caps2; | |
| TRACE("iface %p, caps %p, total %p, free %p.\n", iface, caps, total, free); | |
| DDRAW_Convert_DDSCAPS_1_To_2(caps, &caps2); | |
| return ddraw7_GetAvailableVidMem(&This->IDirectDraw7_iface, &caps2, total, free); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::Initialize | |
| * | |
| * Initializes a DirectDraw interface. | |
| * | |
| * Params: | |
| * GUID: Interface identifier. Well, don't know what this is really good | |
| * for | |
| * | |
| * Returns | |
| * Returns DD_OK on the first call, | |
| * DDERR_ALREADYINITIALIZED on repeated calls | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_Initialize(IDirectDraw7 *iface, GUID *Guid) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| TRACE("iface %p, guid %s.\n", iface, debugstr_guid(Guid)); | |
| if(This->initialized) | |
| { | |
| return DDERR_ALREADYINITIALIZED; | |
| } | |
| else | |
| { | |
| return DD_OK; | |
| } | |
| } | |
| static HRESULT WINAPI ddraw4_Initialize(IDirectDraw4 *iface, GUID *guid) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, guid %s.\n", iface, debugstr_guid(guid)); | |
| return ddraw7_Initialize(&This->IDirectDraw7_iface, guid); | |
| } | |
| static HRESULT WINAPI ddraw3_Initialize(IDirectDraw3 *iface, GUID *guid) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, guid %s.\n", iface, debugstr_guid(guid)); | |
| return ddraw7_Initialize(&This->IDirectDraw7_iface, guid); | |
| } | |
| static HRESULT WINAPI ddraw2_Initialize(IDirectDraw2 *iface, GUID *guid) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, guid %s.\n", iface, debugstr_guid(guid)); | |
| return ddraw7_Initialize(&This->IDirectDraw7_iface, guid); | |
| } | |
| static HRESULT WINAPI ddraw1_Initialize(IDirectDraw *iface, GUID *guid) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, guid %s.\n", iface, debugstr_guid(guid)); | |
| return ddraw7_Initialize(&This->IDirectDraw7_iface, guid); | |
| } | |
| static HRESULT WINAPI d3d1_Initialize(IDirect3D *iface, REFIID riid) | |
| { | |
| TRACE("iface %p, riid %s.\n", iface, debugstr_guid(riid)); | |
| return D3D_OK; | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::FlipToGDISurface | |
| * | |
| * "Makes the surface that the GDI writes to the primary surface" | |
| * Looks like some windows specific thing we don't have to care about. | |
| * According to MSDN it permits GDI dialog boxes in FULLSCREEN mode. Good to | |
| * show error boxes ;) | |
| * Well, just return DD_OK. | |
| * | |
| * Returns: | |
| * Always returns DD_OK | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_FlipToGDISurface(IDirectDraw7 *iface) | |
| { | |
| FIXME("iface %p stub!\n", iface); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_FlipToGDISurface(IDirectDraw4 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_FlipToGDISurface(&This->IDirectDraw7_iface); | |
| } | |
| static HRESULT WINAPI ddraw3_FlipToGDISurface(IDirectDraw3 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_FlipToGDISurface(&This->IDirectDraw7_iface); | |
| } | |
| static HRESULT WINAPI ddraw2_FlipToGDISurface(IDirectDraw2 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_FlipToGDISurface(&This->IDirectDraw7_iface); | |
| } | |
| static HRESULT WINAPI ddraw1_FlipToGDISurface(IDirectDraw *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_FlipToGDISurface(&This->IDirectDraw7_iface); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::WaitForVerticalBlank | |
| * | |
| * This method allows applications to get in sync with the vertical blank | |
| * interval. | |
| * The wormhole demo in the DirectX 7 sdk uses this call, and it doesn't | |
| * redraw the screen, most likely because of this stub | |
| * | |
| * Parameters: | |
| * Flags: one of DDWAITVB_BLOCKBEGIN, DDWAITVB_BLOCKBEGINEVENT | |
| * or DDWAITVB_BLOCKEND | |
| * h: Not used, according to MSDN | |
| * | |
| * Returns: | |
| * Always returns DD_OK | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_WaitForVerticalBlank(IDirectDraw7 *iface, DWORD Flags, HANDLE event) | |
| { | |
| static BOOL hide; | |
| TRACE("iface %p, flags %#x, event %p.\n", iface, Flags, event); | |
| /* This function is called often, so print the fixme only once */ | |
| if(!hide) | |
| { | |
| FIXME("iface %p, flags %#x, event %p stub!\n", iface, Flags, event); | |
| hide = TRUE; | |
| } | |
| /* MSDN says DDWAITVB_BLOCKBEGINEVENT is not supported */ | |
| if(Flags & DDWAITVB_BLOCKBEGINEVENT) | |
| return DDERR_UNSUPPORTED; /* unchecked */ | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_WaitForVerticalBlank(IDirectDraw4 *iface, DWORD flags, HANDLE event) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, flags %#x, event %p.\n", iface, flags, event); | |
| return ddraw7_WaitForVerticalBlank(&This->IDirectDraw7_iface, flags, event); | |
| } | |
| static HRESULT WINAPI ddraw3_WaitForVerticalBlank(IDirectDraw3 *iface, DWORD flags, HANDLE event) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, flags %#x, event %p.\n", iface, flags, event); | |
| return ddraw7_WaitForVerticalBlank(&This->IDirectDraw7_iface, flags, event); | |
| } | |
| static HRESULT WINAPI ddraw2_WaitForVerticalBlank(IDirectDraw2 *iface, DWORD flags, HANDLE event) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, flags %#x, event %p.\n", iface, flags, event); | |
| return ddraw7_WaitForVerticalBlank(&This->IDirectDraw7_iface, flags, event); | |
| } | |
| static HRESULT WINAPI ddraw1_WaitForVerticalBlank(IDirectDraw *iface, DWORD flags, HANDLE event) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, flags %#x, event %p.\n", iface, flags, event); | |
| return ddraw7_WaitForVerticalBlank(&This->IDirectDraw7_iface, flags, event); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::GetScanLine | |
| * | |
| * Returns the scan line that is being drawn on the monitor | |
| * | |
| * Parameters: | |
| * Scanline: Address to write the scan line value to | |
| * | |
| * Returns: | |
| * Always returns DD_OK | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_GetScanLine(IDirectDraw7 *iface, DWORD *Scanline) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| static BOOL hide = FALSE; | |
| WINED3DDISPLAYMODE Mode; | |
| TRACE("iface %p, line %p.\n", iface, Scanline); | |
| /* This function is called often, so print the fixme only once */ | |
| EnterCriticalSection(&ddraw_cs); | |
| if(!hide) | |
| { | |
| FIXME("iface %p, line %p partial stub!\n", iface, Scanline); | |
| hide = TRUE; | |
| } | |
| IWineD3DDevice_GetDisplayMode(This->wineD3DDevice, | |
| 0, | |
| &Mode); | |
| /* Fake the line sweeping of the monitor */ | |
| /* FIXME: We should synchronize with a source to keep the refresh rate */ | |
| *Scanline = This->cur_scanline++; | |
| /* Assume 20 scan lines in the vertical blank */ | |
| if (This->cur_scanline >= Mode.Height + 20) | |
| This->cur_scanline = 0; | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_GetScanLine(IDirectDraw4 *iface, DWORD *line) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, line %p.\n", iface, line); | |
| return ddraw7_GetScanLine(&This->IDirectDraw7_iface, line); | |
| } | |
| static HRESULT WINAPI ddraw3_GetScanLine(IDirectDraw3 *iface, DWORD *line) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, line %p.\n", iface, line); | |
| return ddraw7_GetScanLine(&This->IDirectDraw7_iface, line); | |
| } | |
| static HRESULT WINAPI ddraw2_GetScanLine(IDirectDraw2 *iface, DWORD *line) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, line %p.\n", iface, line); | |
| return ddraw7_GetScanLine(&This->IDirectDraw7_iface, line); | |
| } | |
| static HRESULT WINAPI ddraw1_GetScanLine(IDirectDraw *iface, DWORD *line) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, line %p.\n", iface, line); | |
| return ddraw7_GetScanLine(&This->IDirectDraw7_iface, line); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::TestCooperativeLevel | |
| * | |
| * Informs the application about the state of the video adapter, depending | |
| * on the cooperative level | |
| * | |
| * Returns: | |
| * DD_OK if the device is in a sane state | |
| * DDERR_NOEXCLUSIVEMODE or DDERR_EXCLUSIVEMODEALREADYSET | |
| * if the state is not correct(See below) | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_TestCooperativeLevel(IDirectDraw7 *iface) | |
| { | |
| TRACE("iface %p.\n", iface); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_TestCooperativeLevel(IDirectDraw4 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_TestCooperativeLevel(&This->IDirectDraw7_iface); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::GetGDISurface | |
| * | |
| * Returns the surface that GDI is treating as the primary surface. | |
| * For Wine this is the front buffer | |
| * | |
| * Params: | |
| * GDISurface: Address to write the surface pointer to | |
| * | |
| * Returns: | |
| * DD_OK if the surface was found | |
| * DDERR_NOTFOUND if the GDI surface wasn't found | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_GetGDISurface(IDirectDraw7 *iface, IDirectDrawSurface7 **GDISurface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| struct wined3d_surface *wined3d_surface; | |
| IDirectDrawSurface7 *ddsurf; | |
| HRESULT hr; | |
| DDSCAPS2 ddsCaps; | |
| TRACE("iface %p, surface %p.\n", iface, GDISurface); | |
| /* Get the back buffer from the wineD3DDevice and search its | |
| * attached surfaces for the front buffer | |
| */ | |
| EnterCriticalSection(&ddraw_cs); | |
| hr = IWineD3DDevice_GetBackBuffer(This->wineD3DDevice, | |
| 0, 0, WINED3DBACKBUFFER_TYPE_MONO, &wined3d_surface); | |
| if (FAILED(hr) || !wined3d_surface) | |
| { | |
| ERR("IWineD3DDevice::GetBackBuffer failed\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_NOTFOUND; | |
| } | |
| ddsurf = wined3d_surface_get_parent(wined3d_surface); | |
| wined3d_surface_decref(wined3d_surface); | |
| /* Find the front buffer */ | |
| ddsCaps.dwCaps = DDSCAPS_FRONTBUFFER; | |
| hr = IDirectDrawSurface7_GetAttachedSurface(ddsurf, | |
| &ddsCaps, | |
| GDISurface); | |
| if(hr != DD_OK) | |
| { | |
| ERR("IDirectDrawSurface7::GetAttachedSurface failed, hr = %x\n", hr); | |
| } | |
| /* The AddRef is OK this time */ | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw4_GetGDISurface(IDirectDraw4 *iface, IDirectDrawSurface4 **surface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, surface %p.\n", iface, surface); | |
| return ddraw7_GetGDISurface(&This->IDirectDraw7_iface, (IDirectDrawSurface7 **)surface); | |
| } | |
| static HRESULT WINAPI ddraw3_GetGDISurface(IDirectDraw3 *iface, IDirectDrawSurface **surface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| IDirectDrawSurface7 *surface7; | |
| HRESULT hr; | |
| TRACE("iface %p, surface %p.\n", iface, surface); | |
| hr = ddraw7_GetGDISurface(&This->IDirectDraw7_iface, &surface7); | |
| *surface = surface7 ? (IDirectDrawSurface *)&((IDirectDrawSurfaceImpl *)surface7)->IDirectDrawSurface3_vtbl : NULL; | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw2_GetGDISurface(IDirectDraw2 *iface, IDirectDrawSurface **surface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| IDirectDrawSurface7 *surface7; | |
| HRESULT hr; | |
| TRACE("iface %p, surface %p.\n", iface, surface); | |
| hr = ddraw7_GetGDISurface(&This->IDirectDraw7_iface, &surface7); | |
| *surface = surface7 ? (IDirectDrawSurface *)&((IDirectDrawSurfaceImpl *)surface7)->IDirectDrawSurface3_vtbl : NULL; | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw1_GetGDISurface(IDirectDraw *iface, IDirectDrawSurface **surface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| IDirectDrawSurface7 *surface7; | |
| HRESULT hr; | |
| TRACE("iface %p, surface %p.\n", iface, surface); | |
| hr = ddraw7_GetGDISurface(&This->IDirectDraw7_iface, &surface7); | |
| *surface = surface7 ? (IDirectDrawSurface *)&((IDirectDrawSurfaceImpl *)surface7)->IDirectDrawSurface3_vtbl : NULL; | |
| return hr; | |
| } | |
| struct displaymodescallback_context | |
| { | |
| LPDDENUMMODESCALLBACK func; | |
| void *context; | |
| }; | |
| static HRESULT CALLBACK EnumDisplayModesCallbackThunk(DDSURFACEDESC2 *surface_desc, void *context) | |
| { | |
| struct displaymodescallback_context *cbcontext = context; | |
| DDSURFACEDESC desc; | |
| memcpy(&desc, surface_desc, sizeof(desc)); | |
| desc.dwSize = sizeof(desc); | |
| return cbcontext->func(&desc, cbcontext->context); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::EnumDisplayModes | |
| * | |
| * Enumerates the supported Display modes. The modes can be filtered with | |
| * the DDSD parameter. | |
| * | |
| * Params: | |
| * Flags: can be DDEDM_REFRESHRATES and DDEDM_STANDARDVGAMODES | |
| * DDSD: Surface description to filter the modes | |
| * Context: Pointer passed back to the callback function | |
| * cb: Application-provided callback function | |
| * | |
| * Returns: | |
| * DD_OK on success | |
| * DDERR_INVALIDPARAMS if the callback wasn't set | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_EnumDisplayModes(IDirectDraw7 *iface, DWORD Flags, | |
| DDSURFACEDESC2 *DDSD, void *Context, LPDDENUMMODESCALLBACK2 cb) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| unsigned int modenum, fmt; | |
| enum wined3d_format_id pixelformat = WINED3DFMT_UNKNOWN; | |
| WINED3DDISPLAYMODE mode; | |
| DDSURFACEDESC2 callback_sd; | |
| WINED3DDISPLAYMODE *enum_modes = NULL; | |
| unsigned enum_mode_count = 0, enum_mode_array_size = 0; | |
| static const enum wined3d_format_id checkFormatList[] = | |
| { | |
| WINED3DFMT_B8G8R8X8_UNORM, | |
| WINED3DFMT_B5G6R5_UNORM, | |
| WINED3DFMT_P8_UINT, | |
| }; | |
| TRACE("iface %p, flags %#x, surface_desc %p, context %p, callback %p.\n", | |
| iface, Flags, DDSD, Context, cb); | |
| EnterCriticalSection(&ddraw_cs); | |
| /* This looks sane */ | |
| if(!cb) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| if(DDSD) | |
| { | |
| if ((DDSD->dwFlags & DDSD_PIXELFORMAT) && (DDSD->u4.ddpfPixelFormat.dwFlags & DDPF_RGB) ) | |
| pixelformat = PixelFormat_DD2WineD3D(&DDSD->u4.ddpfPixelFormat); | |
| } | |
| if(!(Flags & DDEDM_REFRESHRATES)) | |
| { | |
| enum_mode_array_size = 16; | |
| enum_modes = HeapAlloc(GetProcessHeap(), 0, sizeof(WINED3DDISPLAYMODE) * enum_mode_array_size); | |
| if (!enum_modes) | |
| { | |
| ERR("Out of memory\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_OUTOFMEMORY; | |
| } | |
| } | |
| for(fmt = 0; fmt < (sizeof(checkFormatList) / sizeof(checkFormatList[0])); fmt++) | |
| { | |
| if(pixelformat != WINED3DFMT_UNKNOWN && checkFormatList[fmt] != pixelformat) | |
| { | |
| continue; | |
| } | |
| modenum = 0; | |
| while (wined3d_enum_adapter_modes(This->wineD3D, WINED3DADAPTER_DEFAULT, | |
| checkFormatList[fmt], modenum++, &mode) == WINED3D_OK) | |
| { | |
| if(DDSD) | |
| { | |
| if(DDSD->dwFlags & DDSD_WIDTH && mode.Width != DDSD->dwWidth) continue; | |
| if(DDSD->dwFlags & DDSD_HEIGHT && mode.Height != DDSD->dwHeight) continue; | |
| } | |
| if(!(Flags & DDEDM_REFRESHRATES)) | |
| { | |
| /* DX docs state EnumDisplayMode should return only unique modes. If DDEDM_REFRESHRATES is not set, refresh | |
| * rate doesn't matter when determining if the mode is unique. So modes only differing in refresh rate have | |
| * to be reduced to a single unique result in such case. | |
| */ | |
| BOOL found = FALSE; | |
| unsigned i; | |
| for (i = 0; i < enum_mode_count; i++) | |
| { | |
| if(enum_modes[i].Width == mode.Width && enum_modes[i].Height == mode.Height && | |
| enum_modes[i].Format == mode.Format) | |
| { | |
| found = TRUE; | |
| break; | |
| } | |
| } | |
| if(found) continue; | |
| } | |
| memset(&callback_sd, 0, sizeof(callback_sd)); | |
| callback_sd.dwSize = sizeof(callback_sd); | |
| callback_sd.u4.ddpfPixelFormat.dwSize = sizeof(DDPIXELFORMAT); | |
| callback_sd.dwFlags = DDSD_HEIGHT|DDSD_WIDTH|DDSD_PIXELFORMAT|DDSD_PITCH; | |
| if(Flags & DDEDM_REFRESHRATES) | |
| { | |
| callback_sd.dwFlags |= DDSD_REFRESHRATE; | |
| callback_sd.u2.dwRefreshRate = mode.RefreshRate; | |
| } | |
| callback_sd.dwWidth = mode.Width; | |
| callback_sd.dwHeight = mode.Height; | |
| PixelFormat_WineD3DtoDD(&callback_sd.u4.ddpfPixelFormat, mode.Format); | |
| /* Calc pitch and DWORD align like MSDN says */ | |
| callback_sd.u1.lPitch = (callback_sd.u4.ddpfPixelFormat.u1.dwRGBBitCount / 8) * mode.Width; | |
| callback_sd.u1.lPitch = (callback_sd.u1.lPitch + 3) & ~3; | |
| TRACE("Enumerating %dx%dx%d @%d\n", callback_sd.dwWidth, callback_sd.dwHeight, callback_sd.u4.ddpfPixelFormat.u1.dwRGBBitCount, | |
| callback_sd.u2.dwRefreshRate); | |
| if(cb(&callback_sd, Context) == DDENUMRET_CANCEL) | |
| { | |
| TRACE("Application asked to terminate the enumeration\n"); | |
| HeapFree(GetProcessHeap(), 0, enum_modes); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| if(!(Flags & DDEDM_REFRESHRATES)) | |
| { | |
| if (enum_mode_count == enum_mode_array_size) | |
| { | |
| WINED3DDISPLAYMODE *new_enum_modes; | |
| enum_mode_array_size *= 2; | |
| new_enum_modes = HeapReAlloc(GetProcessHeap(), 0, enum_modes, sizeof(WINED3DDISPLAYMODE) * enum_mode_array_size); | |
| if (!new_enum_modes) | |
| { | |
| ERR("Out of memory\n"); | |
| HeapFree(GetProcessHeap(), 0, enum_modes); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_OUTOFMEMORY; | |
| } | |
| enum_modes = new_enum_modes; | |
| } | |
| enum_modes[enum_mode_count++] = mode; | |
| } | |
| } | |
| } | |
| TRACE("End of enumeration\n"); | |
| HeapFree(GetProcessHeap(), 0, enum_modes); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_EnumDisplayModes(IDirectDraw4 *iface, DWORD flags, | |
| DDSURFACEDESC2 *surface_desc, void *context, LPDDENUMMODESCALLBACK2 callback) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, flags %#x, surface_desc %p, context %p, callback %p.\n", | |
| iface, flags, surface_desc, context, callback); | |
| return ddraw7_EnumDisplayModes(&This->IDirectDraw7_iface, flags, surface_desc, context, callback); | |
| } | |
| static HRESULT WINAPI ddraw3_EnumDisplayModes(IDirectDraw3 *iface, DWORD flags, | |
| DDSURFACEDESC *surface_desc, void *context, LPDDENUMMODESCALLBACK callback) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| struct displaymodescallback_context cbcontext; | |
| TRACE("iface %p, flags %#x, surface_desc %p, context %p, callback %p.\n", | |
| iface, flags, surface_desc, context, callback); | |
| cbcontext.func = callback; | |
| cbcontext.context = context; | |
| return ddraw7_EnumDisplayModes(&This->IDirectDraw7_iface, flags, (DDSURFACEDESC2 *)surface_desc, | |
| &cbcontext, EnumDisplayModesCallbackThunk); | |
| } | |
| static HRESULT WINAPI ddraw2_EnumDisplayModes(IDirectDraw2 *iface, DWORD flags, | |
| DDSURFACEDESC *surface_desc, void *context, LPDDENUMMODESCALLBACK callback) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| struct displaymodescallback_context cbcontext; | |
| TRACE("iface %p, flags %#x, surface_desc %p, context %p, callback %p.\n", | |
| iface, flags, surface_desc, context, callback); | |
| cbcontext.func = callback; | |
| cbcontext.context = context; | |
| return ddraw7_EnumDisplayModes(&This->IDirectDraw7_iface, flags, (DDSURFACEDESC2 *)surface_desc, | |
| &cbcontext, EnumDisplayModesCallbackThunk); | |
| } | |
| static HRESULT WINAPI ddraw1_EnumDisplayModes(IDirectDraw *iface, DWORD flags, | |
| DDSURFACEDESC *surface_desc, void *context, LPDDENUMMODESCALLBACK callback) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| struct displaymodescallback_context cbcontext; | |
| TRACE("iface %p, flags %#x, surface_desc %p, context %p, callback %p.\n", | |
| iface, flags, surface_desc, context, callback); | |
| cbcontext.func = callback; | |
| cbcontext.context = context; | |
| return ddraw7_EnumDisplayModes(&This->IDirectDraw7_iface, flags, (DDSURFACEDESC2 *)surface_desc, | |
| &cbcontext, EnumDisplayModesCallbackThunk); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::EvaluateMode | |
| * | |
| * Used with IDirectDraw7::StartModeTest to test video modes. | |
| * EvaluateMode is used to pass or fail a mode, and continue with the next | |
| * mode | |
| * | |
| * Params: | |
| * Flags: DDEM_MODEPASSED or DDEM_MODEFAILED | |
| * Timeout: Returns the amount of seconds left before the mode would have | |
| * been failed automatically | |
| * | |
| * Returns: | |
| * This implementation always DD_OK, because it's a stub | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_EvaluateMode(IDirectDraw7 *iface, DWORD Flags, DWORD *Timeout) | |
| { | |
| FIXME("iface %p, flags %#x, timeout %p stub!\n", iface, Flags, Timeout); | |
| /* When implementing this, implement it in WineD3D */ | |
| return DD_OK; | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::GetDeviceIdentifier | |
| * | |
| * Returns the device identifier, which gives information about the driver | |
| * Our device identifier is defined at the beginning of this file. | |
| * | |
| * Params: | |
| * DDDI: Address for the returned structure | |
| * Flags: Can be DDGDI_GETHOSTIDENTIFIER | |
| * | |
| * Returns: | |
| * On success it returns DD_OK | |
| * DDERR_INVALIDPARAMS if DDDI is NULL | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_GetDeviceIdentifier(IDirectDraw7 *iface, | |
| DDDEVICEIDENTIFIER2 *DDDI, DWORD Flags) | |
| { | |
| TRACE("iface %p, device_identifier %p, flags %#x.\n", iface, DDDI, Flags); | |
| if(!DDDI) | |
| return DDERR_INVALIDPARAMS; | |
| /* The DDGDI_GETHOSTIDENTIFIER returns the information about the 2D | |
| * host adapter, if there's a secondary 3D adapter. This doesn't apply | |
| * to any modern hardware, nor is it interesting for Wine, so ignore it. | |
| * Size of DDDEVICEIDENTIFIER2 may be aligned to 8 bytes and thus 4 | |
| * bytes too long. So only copy the relevant part of the structure | |
| */ | |
| memcpy(DDDI, &deviceidentifier, FIELD_OFFSET(DDDEVICEIDENTIFIER2, dwWHQLLevel) + sizeof(DWORD)); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_GetDeviceIdentifier(IDirectDraw4 *iface, | |
| DDDEVICEIDENTIFIER *identifier, DWORD flags) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| DDDEVICEIDENTIFIER2 identifier2; | |
| HRESULT hr; | |
| TRACE("iface %p, identifier %p, flags %#x.\n", iface, identifier, flags); | |
| hr = ddraw7_GetDeviceIdentifier(&This->IDirectDraw7_iface, &identifier2, flags); | |
| DDRAW_Convert_DDDEVICEIDENTIFIER_2_To_1(&identifier2, identifier); | |
| return hr; | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::GetSurfaceFromDC | |
| * | |
| * Returns the Surface for a GDI device context handle. | |
| * Is this related to IDirectDrawSurface::GetDC ??? | |
| * | |
| * Params: | |
| * hdc: hdc to return the surface for | |
| * Surface: Address to write the surface pointer to | |
| * | |
| * Returns: | |
| * Always returns DD_OK because it's a stub | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_GetSurfaceFromDC(IDirectDraw7 *iface, HDC hdc, | |
| IDirectDrawSurface7 **Surface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| struct wined3d_surface *wined3d_surface; | |
| HRESULT hr; | |
| TRACE("iface %p, dc %p, surface %p.\n", iface, hdc, Surface); | |
| if (!Surface) return E_INVALIDARG; | |
| hr = IWineD3DDevice_GetSurfaceFromDC(This->wineD3DDevice, hdc, &wined3d_surface); | |
| if (FAILED(hr)) | |
| { | |
| TRACE("No surface found for dc %p.\n", hdc); | |
| *Surface = NULL; | |
| return DDERR_NOTFOUND; | |
| } | |
| *Surface = wined3d_surface_get_parent(wined3d_surface); | |
| IDirectDrawSurface7_AddRef(*Surface); | |
| TRACE("Returning surface %p.\n", Surface); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_GetSurfaceFromDC(IDirectDraw4 *iface, HDC dc, | |
| IDirectDrawSurface4 **surface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| IDirectDrawSurface7 *surface7; | |
| HRESULT hr; | |
| TRACE("iface %p, dc %p, surface %p.\n", iface, dc, surface); | |
| if (!surface) return E_INVALIDARG; | |
| hr = ddraw7_GetSurfaceFromDC(&This->IDirectDraw7_iface, dc, &surface7); | |
| *surface = surface7 ? (IDirectDrawSurface4 *)&((IDirectDrawSurfaceImpl *)surface7)->IDirectDrawSurface3_vtbl : NULL; | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw3_GetSurfaceFromDC(IDirectDraw3 *iface, HDC dc, | |
| IDirectDrawSurface **surface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, dc %p, surface %p.\n", iface, dc, surface); | |
| return ddraw7_GetSurfaceFromDC(&This->IDirectDraw7_iface, dc, (IDirectDrawSurface7 **)surface); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::RestoreAllSurfaces | |
| * | |
| * Calls the restore method of all surfaces | |
| * | |
| * Params: | |
| * | |
| * Returns: | |
| * Always returns DD_OK because it's a stub | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_RestoreAllSurfaces(IDirectDraw7 *iface) | |
| { | |
| FIXME("iface %p stub!\n", iface); | |
| /* This isn't hard to implement: Enumerate all WineD3D surfaces, | |
| * get their parent and call their restore method. Do not implement | |
| * it in WineD3D, as restoring a surface means re-creating the | |
| * WineD3DDSurface | |
| */ | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_RestoreAllSurfaces(IDirectDraw4 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p.\n", iface); | |
| return ddraw7_RestoreAllSurfaces(&This->IDirectDraw7_iface); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::StartModeTest | |
| * | |
| * Tests the specified video modes to update the system registry with | |
| * refresh rate information. StartModeTest starts the mode test, | |
| * EvaluateMode is used to fail or pass a mode. If EvaluateMode | |
| * isn't called within 15 seconds, the mode is failed automatically | |
| * | |
| * As refresh rates are handled by the X server, I don't think this | |
| * Method is important | |
| * | |
| * Params: | |
| * Modes: An array of mode specifications | |
| * NumModes: The number of modes in Modes | |
| * Flags: Some flags... | |
| * | |
| * Returns: | |
| * Returns DDERR_TESTFINISHED if flags contains DDSMT_ISTESTREQUIRED, | |
| * if no modes are passed, DDERR_INVALIDPARAMS is returned, | |
| * otherwise DD_OK | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_StartModeTest(IDirectDraw7 *iface, SIZE *Modes, DWORD NumModes, DWORD Flags) | |
| { | |
| FIXME("iface %p, modes %p, mode_count %u, flags %#x partial stub!\n", | |
| iface, Modes, NumModes, Flags); | |
| /* This looks sane */ | |
| if( (!Modes) || (NumModes == 0) ) return DDERR_INVALIDPARAMS; | |
| /* DDSMT_ISTESTREQUIRED asks if a mode test is necessary. | |
| * As it is not, DDERR_TESTFINISHED is returned | |
| * (hopefully that's correct | |
| * | |
| if(Flags & DDSMT_ISTESTREQUIRED) return DDERR_TESTFINISHED; | |
| * well, that value doesn't (yet) exist in the wine headers, so ignore it | |
| */ | |
| return DD_OK; | |
| } | |
| /***************************************************************************** | |
| * ddraw_recreate_surfaces_cb | |
| * | |
| * Enumeration callback for ddraw_recreate_surface. | |
| * It re-recreates the WineD3DSurface. It's pretty straightforward | |
| * | |
| *****************************************************************************/ | |
| HRESULT WINAPI ddraw_recreate_surfaces_cb(IDirectDrawSurface7 *surf, DDSURFACEDESC2 *desc, void *Context) | |
| { | |
| IDirectDrawSurfaceImpl *surfImpl = (IDirectDrawSurfaceImpl *)surf; | |
| struct wined3d_resource_desc wined3d_desc; | |
| struct wined3d_resource *wined3d_resource; | |
| IDirectDrawImpl *This = surfImpl->ddraw; | |
| struct wined3d_surface *wined3d_surface; | |
| struct wined3d_swapchain *swapchain; | |
| struct wined3d_clipper *clipper; | |
| void *parent; | |
| HRESULT hr; | |
| TRACE("surface %p, surface_desc %p, context %p.\n", | |
| surf, desc, Context); | |
| /* For the enumeration */ | |
| IDirectDrawSurface7_Release(surf); | |
| if(surfImpl->ImplType == This->ImplType) return DDENUMRET_OK; /* Continue */ | |
| /* Get the objects */ | |
| swapchain = surfImpl->wined3d_swapchain; | |
| surfImpl->wined3d_swapchain = NULL; | |
| wined3d_surface = surfImpl->wined3d_surface; | |
| /* get the clipper */ | |
| clipper = wined3d_surface_get_clipper(wined3d_surface); | |
| /* Get the surface properties */ | |
| wined3d_resource = wined3d_surface_get_resource(wined3d_surface); | |
| wined3d_resource_get_desc(wined3d_resource, &wined3d_desc); | |
| parent = wined3d_surface_get_parent(wined3d_surface); | |
| hr = IWineD3DDevice_CreateSurface(This->wineD3DDevice, wined3d_desc.width, wined3d_desc.height, | |
| wined3d_desc.format, TRUE, FALSE, surfImpl->mipmap_level, wined3d_desc.usage, wined3d_desc.pool, | |
| wined3d_desc.multisample_type, wined3d_desc.multisample_quality, This->ImplType, | |
| parent, &ddraw_surface_wined3d_parent_ops, &surfImpl->wined3d_surface); | |
| if (FAILED(hr)) | |
| { | |
| surfImpl->wined3d_surface = wined3d_surface; | |
| return hr; | |
| } | |
| wined3d_surface_set_clipper(surfImpl->wined3d_surface, clipper); | |
| /* TODO: Copy the surface content, except for render targets */ | |
| /* If there's a swapchain, it owns the wined3d surfaces. So Destroy | |
| * the swapchain | |
| */ | |
| if (swapchain) | |
| { | |
| /* The backbuffers have the swapchain set as well, but the primary | |
| * owns it and destroys it. */ | |
| if (surfImpl->surface_desc.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE) | |
| IWineD3DDevice_UninitGDI(This->wineD3DDevice); | |
| surfImpl->isRenderTarget = FALSE; | |
| } | |
| else | |
| { | |
| if (!wined3d_surface_decref(wined3d_surface)) | |
| TRACE("Surface released successful, next surface\n"); | |
| else | |
| ERR("Something's still holding the old WineD3DSurface\n"); | |
| } | |
| surfImpl->ImplType = This->ImplType; | |
| return DDENUMRET_OK; | |
| } | |
| /***************************************************************************** | |
| * ddraw_recreate_surfaces | |
| * | |
| * A function, that converts all wineD3DSurfaces to the new implementation type | |
| * It enumerates all surfaces with IWineD3DDevice::EnumSurfaces, creates a | |
| * new WineD3DSurface, copies the content and releases the old surface | |
| * | |
| *****************************************************************************/ | |
| static HRESULT ddraw_recreate_surfaces(IDirectDrawImpl *This) | |
| { | |
| DDSURFACEDESC2 desc; | |
| TRACE("(%p): Switch to implementation %d\n", This, This->ImplType); | |
| if(This->ImplType != SURFACE_OPENGL && This->d3d_initialized) | |
| { | |
| /* Should happen almost never */ | |
| FIXME("(%p) Switching to non-opengl surfaces with d3d started. Is this a bug?\n", This); | |
| /* Shutdown d3d */ | |
| IWineD3DDevice_Uninit3D(This->wineD3DDevice); | |
| } | |
| /* Contrary: D3D starting is handled by the caller, because it knows the render target */ | |
| memset(&desc, 0, sizeof(desc)); | |
| desc.dwSize = sizeof(desc); | |
| return IDirectDraw7_EnumSurfaces(&This->IDirectDraw7_iface, 0, &desc, This, | |
| ddraw_recreate_surfaces_cb); | |
| } | |
| /***************************************************************************** | |
| * ddraw_create_surface | |
| * | |
| * A helper function for IDirectDraw7::CreateSurface. It creates a new surface | |
| * with the passed parameters. | |
| * | |
| * Params: | |
| * DDSD: Description of the surface to create | |
| * Surf: Address to store the interface pointer at | |
| * | |
| * Returns: | |
| * DD_OK on success | |
| * | |
| *****************************************************************************/ | |
| static HRESULT ddraw_create_surface(IDirectDrawImpl *This, DDSURFACEDESC2 *pDDSD, | |
| IDirectDrawSurfaceImpl **ppSurf, UINT level) | |
| { | |
| WINED3DSURFTYPE ImplType = This->ImplType; | |
| HRESULT hr; | |
| TRACE("ddraw %p, surface_desc %p, surface %p, level %u.\n", | |
| This, pDDSD, ppSurf, level); | |
| if (TRACE_ON(ddraw)) | |
| { | |
| TRACE(" (%p) Requesting surface desc :\n", This); | |
| DDRAW_dump_surface_desc(pDDSD); | |
| } | |
| /* Select the surface type, if it wasn't choosen yet */ | |
| if(ImplType == SURFACE_UNKNOWN) | |
| { | |
| /* Use GL Surfaces if a D3DDEVICE Surface is requested */ | |
| if(pDDSD->ddsCaps.dwCaps & DDSCAPS_3DDEVICE) | |
| { | |
| TRACE("(%p) Choosing GL surfaces because a 3DDEVICE Surface was requested\n", This); | |
| ImplType = SURFACE_OPENGL; | |
| } | |
| /* Otherwise use GDI surfaces for now */ | |
| else | |
| { | |
| TRACE("(%p) Choosing GDI surfaces for 2D rendering\n", This); | |
| ImplType = SURFACE_GDI; | |
| } | |
| /* Policy if all surface implementations are available: | |
| * First, check if a default type was set with winecfg. If not, | |
| * try Xrender surfaces, and use them if they work. Next, check if | |
| * accelerated OpenGL is available, and use GL surfaces in this | |
| * case. If all else fails, use GDI surfaces. If a 3DDEVICE surface | |
| * was created, always use OpenGL surfaces. | |
| * | |
| * (Note: Xrender surfaces are not implemented for now, the | |
| * unaccelerated implementation uses GDI to render in Software) | |
| */ | |
| /* Store the type. If it needs to be changed, all WineD3DSurfaces have to | |
| * be re-created. This could be done with IDirectDrawSurface7::Restore | |
| */ | |
| This->ImplType = ImplType; | |
| } | |
| else | |
| { | |
| if ((pDDSD->ddsCaps.dwCaps & DDSCAPS_3DDEVICE) | |
| && (This->ImplType != SURFACE_OPENGL) | |
| && DefaultSurfaceType == SURFACE_UNKNOWN) | |
| { | |
| /* We have to change to OpenGL, | |
| * and re-create all WineD3DSurfaces | |
| */ | |
| ImplType = SURFACE_OPENGL; | |
| This->ImplType = ImplType; | |
| TRACE("(%p) Re-creating all surfaces\n", This); | |
| ddraw_recreate_surfaces(This); | |
| TRACE("(%p) Done recreating all surfaces\n", This); | |
| } | |
| else if(This->ImplType != SURFACE_OPENGL && pDDSD->ddsCaps.dwCaps & DDSCAPS_3DDEVICE) | |
| { | |
| WARN("The application requests a 3D capable surface, but a non-opengl surface was set in the registry\n"); | |
| /* Do not fail surface creation, only fail 3D device creation */ | |
| } | |
| } | |
| /* Create the Surface object */ | |
| *ppSurf = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(IDirectDrawSurfaceImpl)); | |
| if(!*ppSurf) | |
| { | |
| ERR("(%p) Error allocating memory for a surface\n", This); | |
| return DDERR_OUTOFVIDEOMEMORY; | |
| } | |
| hr = ddraw_surface_init(*ppSurf, This, pDDSD, level, ImplType); | |
| if (FAILED(hr)) | |
| { | |
| WARN("Failed to initialize surface, hr %#x.\n", hr); | |
| HeapFree(GetProcessHeap(), 0, *ppSurf); | |
| return hr; | |
| } | |
| /* Increase the surface counter, and attach the surface */ | |
| InterlockedIncrement(&This->surfaces); | |
| list_add_head(&This->surface_list, &(*ppSurf)->surface_list_entry); | |
| TRACE("Created surface %p.\n", *ppSurf); | |
| return DD_OK; | |
| } | |
| /***************************************************************************** | |
| * CreateAdditionalSurfaces | |
| * | |
| * Creates a new mipmap chain. | |
| * | |
| * Params: | |
| * root: Root surface to attach the newly created chain to | |
| * count: number of surfaces to create | |
| * DDSD: Description of the surface. Intentionally not a pointer to avoid side | |
| * effects on the caller | |
| * CubeFaceRoot: Whether the new surface is a root of a cube map face. This | |
| * creates an additional surface without the mipmapping flags | |
| * | |
| *****************************************************************************/ | |
| static HRESULT | |
| CreateAdditionalSurfaces(IDirectDrawImpl *This, | |
| IDirectDrawSurfaceImpl *root, | |
| UINT count, | |
| DDSURFACEDESC2 DDSD, | |
| BOOL CubeFaceRoot) | |
| { | |
| UINT i, j, level = 0; | |
| HRESULT hr; | |
| IDirectDrawSurfaceImpl *last = root; | |
| for(i = 0; i < count; i++) | |
| { | |
| IDirectDrawSurfaceImpl *object2 = NULL; | |
| /* increase the mipmap level, but only if a mipmap is created | |
| * In this case, also halve the size | |
| */ | |
| if(DDSD.ddsCaps.dwCaps & DDSCAPS_MIPMAP && !CubeFaceRoot) | |
| { | |
| level++; | |
| if(DDSD.dwWidth > 1) DDSD.dwWidth /= 2; | |
| if(DDSD.dwHeight > 1) DDSD.dwHeight /= 2; | |
| /* Set the mipmap sublevel flag according to msdn */ | |
| DDSD.ddsCaps.dwCaps2 |= DDSCAPS2_MIPMAPSUBLEVEL; | |
| } | |
| else | |
| { | |
| DDSD.ddsCaps.dwCaps2 &= ~DDSCAPS2_MIPMAPSUBLEVEL; | |
| } | |
| CubeFaceRoot = FALSE; | |
| hr = ddraw_create_surface(This, &DDSD, &object2, level); | |
| if(hr != DD_OK) | |
| { | |
| return hr; | |
| } | |
| /* Add the new surface to the complex attachment array */ | |
| for(j = 0; j < MAX_COMPLEX_ATTACHED; j++) | |
| { | |
| if(last->complex_array[j]) continue; | |
| last->complex_array[j] = object2; | |
| break; | |
| } | |
| last = object2; | |
| /* Remove the (possible) back buffer cap from the new surface description, | |
| * because only one surface in the flipping chain is a back buffer, one | |
| * is a front buffer, the others are just primary surfaces. | |
| */ | |
| DDSD.ddsCaps.dwCaps &= ~DDSCAPS_BACKBUFFER; | |
| } | |
| return DD_OK; | |
| } | |
| /* Must set all attached surfaces (e.g. mipmaps) versions as well */ | |
| static void ddraw_set_surface_version(IDirectDrawSurfaceImpl *surface, UINT version) | |
| { | |
| unsigned int i; | |
| TRACE("surface %p, version %u -> %u.\n", surface, surface->version, version); | |
| surface->version = version; | |
| for (i = 0; i < MAX_COMPLEX_ATTACHED; ++i) | |
| { | |
| if (!surface->complex_array[i]) break; | |
| ddraw_set_surface_version(surface->complex_array[i], version); | |
| } | |
| while ((surface = surface->next_attached)) | |
| { | |
| ddraw_set_surface_version(surface, version); | |
| } | |
| } | |
| /***************************************************************************** | |
| * ddraw_attach_d3d_device | |
| * | |
| * Initializes the D3D capabilities of WineD3D | |
| * | |
| * Params: | |
| * primary: The primary surface for D3D | |
| * | |
| * Returns | |
| * DD_OK on success, | |
| * DDERR_* otherwise | |
| * | |
| *****************************************************************************/ | |
| static HRESULT ddraw_attach_d3d_device(IDirectDrawImpl *ddraw, IDirectDrawSurfaceImpl *primary) | |
| { | |
| WINED3DPRESENT_PARAMETERS localParameters; | |
| HWND window = ddraw->dest_window; | |
| HRESULT hr; | |
| TRACE("ddraw %p, primary %p.\n", ddraw, primary); | |
| if (!window || window == GetDesktopWindow()) | |
| { | |
| window = CreateWindowExA(0, DDRAW_WINDOW_CLASS_NAME, "Hidden D3D Window", | |
| WS_DISABLED, 0, 0, GetSystemMetrics(SM_CXSCREEN), GetSystemMetrics(SM_CYSCREEN), | |
| NULL, NULL, NULL, NULL); | |
| if (!window) | |
| { | |
| ERR("Failed to create window, last error %#x.\n", GetLastError()); | |
| return E_FAIL; | |
| } | |
| ShowWindow(window, SW_HIDE); /* Just to be sure */ | |
| WARN("No window for the Direct3DDevice, created hidden window %p.\n", window); | |
| } | |
| else | |
| { | |
| TRACE("Using existing window %p for Direct3D rendering.\n", window); | |
| } | |
| ddraw->d3d_window = window; | |
| /* Store the future Render Target surface */ | |
| ddraw->d3d_target = primary; | |
| /* Use the surface description for the device parameters, not the device | |
| * settings. The application might render to an offscreen surface. */ | |
| localParameters.BackBufferWidth = primary->surface_desc.dwWidth; | |
| localParameters.BackBufferHeight = primary->surface_desc.dwHeight; | |
| localParameters.BackBufferFormat = PixelFormat_DD2WineD3D(&primary->surface_desc.u4.ddpfPixelFormat); | |
| localParameters.BackBufferCount = (primary->surface_desc.dwFlags & DDSD_BACKBUFFERCOUNT) | |
| ? primary->surface_desc.dwBackBufferCount : 0; | |
| localParameters.MultiSampleType = WINED3DMULTISAMPLE_NONE; | |
| localParameters.MultiSampleQuality = 0; | |
| localParameters.SwapEffect = WINED3DSWAPEFFECT_COPY; | |
| localParameters.hDeviceWindow = window; | |
| localParameters.Windowed = !(ddraw->cooperative_level & DDSCL_FULLSCREEN); | |
| localParameters.EnableAutoDepthStencil = TRUE; | |
| localParameters.AutoDepthStencilFormat = WINED3DFMT_D16_UNORM; | |
| localParameters.Flags = 0; | |
| localParameters.FullScreen_RefreshRateInHz = WINED3DPRESENT_RATE_DEFAULT; | |
| localParameters.PresentationInterval = WINED3DPRESENT_INTERVAL_DEFAULT; | |
| localParameters.AutoRestoreDisplayMode = FALSE; | |
| /* Set this NOW, otherwise creating the depth stencil surface will cause a | |
| * recursive loop until ram or emulated video memory is full. */ | |
| ddraw->d3d_initialized = TRUE; | |
| hr = IWineD3DDevice_Init3D(ddraw->wineD3DDevice, &localParameters); | |
| if (FAILED(hr)) | |
| { | |
| ddraw->d3d_target = NULL; | |
| ddraw->d3d_initialized = FALSE; | |
| return hr; | |
| } | |
| ddraw->declArraySize = 2; | |
| ddraw->decls = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*ddraw->decls) * ddraw->declArraySize); | |
| if (!ddraw->decls) | |
| { | |
| ERR("Error allocating an array for the converted vertex decls.\n"); | |
| ddraw->declArraySize = 0; | |
| hr = IWineD3DDevice_Uninit3D(ddraw->wineD3DDevice); | |
| return E_OUTOFMEMORY; | |
| } | |
| TRACE("Successfully initialized 3D.\n"); | |
| return DD_OK; | |
| } | |
| static HRESULT ddraw_create_gdi_swapchain(IDirectDrawImpl *ddraw, IDirectDrawSurfaceImpl *primary) | |
| { | |
| WINED3DPRESENT_PARAMETERS presentation_parameters; | |
| HWND window; | |
| HRESULT hr; | |
| window = ddraw->dest_window; | |
| memset(&presentation_parameters, 0, sizeof(presentation_parameters)); | |
| /* Use the surface description for the device parameters, not the device | |
| * settings. The application might render to an offscreen surface. */ | |
| presentation_parameters.BackBufferWidth = primary->surface_desc.dwWidth; | |
| presentation_parameters.BackBufferHeight = primary->surface_desc.dwHeight; | |
| presentation_parameters.BackBufferFormat = PixelFormat_DD2WineD3D(&primary->surface_desc.u4.ddpfPixelFormat); | |
| presentation_parameters.BackBufferCount = (primary->surface_desc.dwFlags & DDSD_BACKBUFFERCOUNT) | |
| ? primary->surface_desc.dwBackBufferCount : 0; | |
| presentation_parameters.MultiSampleType = WINED3DMULTISAMPLE_NONE; | |
| presentation_parameters.MultiSampleQuality = 0; | |
| presentation_parameters.SwapEffect = WINED3DSWAPEFFECT_FLIP; | |
| presentation_parameters.hDeviceWindow = window; | |
| presentation_parameters.Windowed = !(ddraw->cooperative_level & DDSCL_FULLSCREEN); | |
| presentation_parameters.EnableAutoDepthStencil = FALSE; /* Not on GDI swapchains */ | |
| presentation_parameters.AutoDepthStencilFormat = 0; | |
| presentation_parameters.Flags = 0; | |
| presentation_parameters.FullScreen_RefreshRateInHz = WINED3DPRESENT_RATE_DEFAULT; | |
| presentation_parameters.PresentationInterval = WINED3DPRESENT_INTERVAL_DEFAULT; | |
| presentation_parameters.AutoRestoreDisplayMode = FALSE; | |
| ddraw->d3d_target = primary; | |
| hr = IWineD3DDevice_InitGDI(ddraw->wineD3DDevice, &presentation_parameters); | |
| ddraw->d3d_target = NULL; | |
| if (FAILED(hr)) | |
| { | |
| WARN("Failed to initialize GDI ddraw implementation, hr %#x.\n", hr); | |
| primary->wined3d_swapchain = NULL; | |
| } | |
| return hr; | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::CreateSurface | |
| * | |
| * Creates a new IDirectDrawSurface object and returns its interface. | |
| * | |
| * The surface connections with wined3d are a bit tricky. Basically it works | |
| * like this: | |
| * | |
| * |------------------------| |-----------------| | |
| * | DDraw surface | | WineD3DSurface | | |
| * | | | | | |
| * | WineD3DSurface |-------------->| | | |
| * | Child |<------------->| Parent | | |
| * |------------------------| |-----------------| | |
| * | |
| * The DDraw surface is the parent of the wined3d surface, and it releases | |
| * the WineD3DSurface when the ddraw surface is destroyed. | |
| * | |
| * However, for all surfaces which can be in a container in WineD3D, | |
| * we have to do this. These surfaces are usually complex surfaces, | |
| * so this concerns primary surfaces with a front and a back buffer, | |
| * and textures. | |
| * | |
| * |------------------------| |-----------------| | |
| * | DDraw surface | | Container | | |
| * | | | | | |
| * | Child |<------------->| Parent | | |
| * | Texture |<------------->| | | |
| * | WineD3DSurface |<----| | Levels |<--| | |
| * | Complex connection | | | | | | |
| * |------------------------| | |-----------------| | | |
| * ^ | | | |
| * | | | | |
| * | | | | |
| * | |------------------| | |-----------------| | | |
| * | | IParent | |-------->| WineD3DSurface | | | |
| * | | | | | | | |
| * | | Child |<------------->| Parent | | | |
| * | | | | Container |<--| | |
| * | |------------------| |-----------------| | | |
| * | | | |
| * | |----------------------| | | |
| * | | DDraw surface 2 | | | |
| * | | | | | |
| * |<->| Complex root Child | | | |
| * | | Texture | | | |
| * | | WineD3DSurface |<----| | | |
| * | |----------------------| | | | |
| * | | | | |
| * | |---------------------| | |-----------------| | | |
| * | | IParent | |----->| WineD3DSurface | | | |
| * | | | | | | | |
| * | | Child |<---------->| Parent | | | |
| * | |---------------------| | Container |<--| | |
| * | |-----------------| | | |
| * | | | |
| * | ---More surfaces can follow--- | | |
| * | |
| * The reason is that the IWineD3DSwapchain(render target container) | |
| * and the IWineD3DTexure(Texture container) release the parents | |
| * of their surface's children, but by releasing the complex root | |
| * the surfaces which are complexly attached to it are destroyed | |
| * too. See IDirectDrawSurface::Release for a more detailed | |
| * explanation. | |
| * | |
| * Params: | |
| * DDSD: Description of the surface to create | |
| * Surf: Address to store the interface pointer at | |
| * UnkOuter: Basically for aggregation support, but ddraw doesn't support | |
| * aggregation, so it has to be NULL | |
| * | |
| * Returns: | |
| * DD_OK on success | |
| * CLASS_E_NOAGGREGATION if UnkOuter != NULL | |
| * DDERR_* if an error occurs | |
| * | |
| *****************************************************************************/ | |
| static HRESULT CreateSurface(IDirectDrawImpl *ddraw, DDSURFACEDESC2 *DDSD, | |
| IDirectDrawSurface7 **Surf, IUnknown *UnkOuter) | |
| { | |
| IDirectDrawSurfaceImpl *object = NULL; | |
| HRESULT hr; | |
| LONG extra_surfaces = 0; | |
| DDSURFACEDESC2 desc2; | |
| WINED3DDISPLAYMODE Mode; | |
| const DWORD sysvidmem = DDSCAPS_VIDEOMEMORY | DDSCAPS_SYSTEMMEMORY; | |
| TRACE("ddraw %p, surface_desc %p, surface %p, outer_unknown %p.\n", ddraw, DDSD, Surf, UnkOuter); | |
| /* Some checks before we start */ | |
| if (TRACE_ON(ddraw)) | |
| { | |
| TRACE(" (%p) Requesting surface desc :\n", ddraw); | |
| DDRAW_dump_surface_desc(DDSD); | |
| } | |
| EnterCriticalSection(&ddraw_cs); | |
| if (UnkOuter != NULL) | |
| { | |
| FIXME("(%p) : outer != NULL?\n", ddraw); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return CLASS_E_NOAGGREGATION; /* unchecked */ | |
| } | |
| if (Surf == NULL) | |
| { | |
| FIXME("(%p) You want to get back a surface? Don't give NULL ptrs!\n", ddraw); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return E_POINTER; /* unchecked */ | |
| } | |
| if (!(DDSD->dwFlags & DDSD_CAPS)) | |
| { | |
| /* DVIDEO.DLL does forget the DDSD_CAPS flag ... *sigh* */ | |
| DDSD->dwFlags |= DDSD_CAPS; | |
| } | |
| if (DDSD->ddsCaps.dwCaps & DDSCAPS_ALLOCONLOAD) | |
| { | |
| /* If the surface is of the 'alloconload' type, ignore the LPSURFACE field */ | |
| DDSD->dwFlags &= ~DDSD_LPSURFACE; | |
| } | |
| if ((DDSD->dwFlags & DDSD_LPSURFACE) && (DDSD->lpSurface == NULL)) | |
| { | |
| /* Frank Herbert's Dune specifies a null pointer for the surface, ignore the LPSURFACE field */ | |
| WARN("(%p) Null surface pointer specified, ignore it!\n", ddraw); | |
| DDSD->dwFlags &= ~DDSD_LPSURFACE; | |
| } | |
| if((DDSD->ddsCaps.dwCaps & (DDSCAPS_FLIP | DDSCAPS_PRIMARYSURFACE)) == (DDSCAPS_FLIP | DDSCAPS_PRIMARYSURFACE) && | |
| !(ddraw->cooperative_level & DDSCL_EXCLUSIVE)) | |
| { | |
| TRACE("(%p): Attempt to create a flipable primary surface without DDSCL_EXCLUSIVE set\n", | |
| ddraw); | |
| *Surf = NULL; | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_NOEXCLUSIVEMODE; | |
| } | |
| if((DDSD->ddsCaps.dwCaps & (DDSCAPS_BACKBUFFER | DDSCAPS_PRIMARYSURFACE)) == (DDSCAPS_BACKBUFFER | DDSCAPS_PRIMARYSURFACE)) | |
| { | |
| WARN("Application wanted to create back buffer primary surface\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDCAPS; | |
| } | |
| if((DDSD->ddsCaps.dwCaps & sysvidmem) == sysvidmem) | |
| { | |
| /* This is a special switch in ddrawex.dll, but not allowed in ddraw.dll */ | |
| WARN("Application tries to put the surface in both system and video memory\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| *Surf = NULL; | |
| return DDERR_INVALIDCAPS; | |
| } | |
| /* Check cube maps but only if the size includes them */ | |
| if (DDSD->dwSize >= sizeof(DDSURFACEDESC2)) | |
| { | |
| if(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP_ALLFACES && | |
| !(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP)) | |
| { | |
| WARN("Cube map faces requested without cube map flag\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDCAPS; | |
| } | |
| if(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP && | |
| (DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP_ALLFACES) == 0) | |
| { | |
| WARN("Cube map without faces requested\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| /* Quick tests confirm those can be created, but we don't do that yet */ | |
| if(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP && | |
| (DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP_ALLFACES) != DDSCAPS2_CUBEMAP_ALLFACES) | |
| { | |
| FIXME("Partial cube maps not supported yet\n"); | |
| } | |
| } | |
| /* According to the msdn this flag is ignored by CreateSurface */ | |
| if (DDSD->dwSize >= sizeof(DDSURFACEDESC2)) | |
| DDSD->ddsCaps.dwCaps2 &= ~DDSCAPS2_MIPMAPSUBLEVEL; | |
| /* Modify some flags */ | |
| memset(&desc2, 0, sizeof(desc2)); | |
| desc2.dwSize = sizeof(desc2); /* For the struct copy */ | |
| DD_STRUCT_COPY_BYSIZE(&desc2, DDSD); | |
| desc2.dwSize = sizeof(desc2); /* To override a possibly smaller size */ | |
| desc2.u4.ddpfPixelFormat.dwSize=sizeof(DDPIXELFORMAT); /* Just to be sure */ | |
| /* Get the video mode from WineD3D - we will need it */ | |
| hr = IWineD3DDevice_GetDisplayMode(ddraw->wineD3DDevice, 0, &Mode); | |
| if(FAILED(hr)) | |
| { | |
| ERR("Failed to read display mode from wined3d\n"); | |
| switch(ddraw->orig_bpp) | |
| { | |
| case 8: | |
| Mode.Format = WINED3DFMT_P8_UINT; | |
| break; | |
| case 15: | |
| Mode.Format = WINED3DFMT_B5G5R5X1_UNORM; | |
| break; | |
| case 16: | |
| Mode.Format = WINED3DFMT_B5G6R5_UNORM; | |
| break; | |
| case 24: | |
| Mode.Format = WINED3DFMT_B8G8R8_UNORM; | |
| break; | |
| case 32: | |
| Mode.Format = WINED3DFMT_B8G8R8X8_UNORM; | |
| break; | |
| } | |
| Mode.Width = ddraw->orig_width; | |
| Mode.Height = ddraw->orig_height; | |
| } | |
| /* No pixelformat given? Use the current screen format */ | |
| if(!(desc2.dwFlags & DDSD_PIXELFORMAT)) | |
| { | |
| desc2.dwFlags |= DDSD_PIXELFORMAT; | |
| desc2.u4.ddpfPixelFormat.dwSize=sizeof(DDPIXELFORMAT); | |
| /* Wait: It could be a Z buffer */ | |
| if(desc2.ddsCaps.dwCaps & DDSCAPS_ZBUFFER) | |
| { | |
| switch(desc2.u2.dwMipMapCount) /* Who had this glorious idea? */ | |
| { | |
| case 15: | |
| PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_S1_UINT_D15_UNORM); | |
| break; | |
| case 16: | |
| PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_D16_UNORM); | |
| break; | |
| case 24: | |
| PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_X8D24_UNORM); | |
| break; | |
| case 32: | |
| PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_D32_UNORM); | |
| break; | |
| default: | |
| ERR("Unknown Z buffer bit depth\n"); | |
| } | |
| } | |
| else | |
| { | |
| PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, Mode.Format); | |
| } | |
| } | |
| /* No Width or no Height? Use the original screen size | |
| */ | |
| if(!(desc2.dwFlags & DDSD_WIDTH) || | |
| !(desc2.dwFlags & DDSD_HEIGHT) ) | |
| { | |
| /* Invalid for non-render targets */ | |
| if(!(desc2.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE)) | |
| { | |
| WARN("Creating a non-Primary surface without Width or Height info, returning DDERR_INVALIDPARAMS\n"); | |
| *Surf = NULL; | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| desc2.dwFlags |= DDSD_WIDTH | DDSD_HEIGHT; | |
| desc2.dwWidth = Mode.Width; | |
| desc2.dwHeight = Mode.Height; | |
| } | |
| if (!desc2.dwWidth || !desc2.dwHeight) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| /* Mipmap count fixes */ | |
| if(desc2.ddsCaps.dwCaps & DDSCAPS_MIPMAP) | |
| { | |
| if(desc2.ddsCaps.dwCaps & DDSCAPS_COMPLEX) | |
| { | |
| if(desc2.dwFlags & DDSD_MIPMAPCOUNT) | |
| { | |
| /* Mipmap count is given, should not be 0 */ | |
| if( desc2.u2.dwMipMapCount == 0 ) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| } | |
| else | |
| { | |
| /* Undocumented feature: Create sublevels until | |
| * either the width or the height is 1 | |
| */ | |
| DWORD min = desc2.dwWidth < desc2.dwHeight ? | |
| desc2.dwWidth : desc2.dwHeight; | |
| desc2.u2.dwMipMapCount = 0; | |
| while( min ) | |
| { | |
| desc2.u2.dwMipMapCount += 1; | |
| min >>= 1; | |
| } | |
| } | |
| } | |
| else | |
| { | |
| /* Not-complex mipmap -> Mipmapcount = 1 */ | |
| desc2.u2.dwMipMapCount = 1; | |
| } | |
| extra_surfaces = desc2.u2.dwMipMapCount - 1; | |
| /* There's a mipmap count in the created surface in any case */ | |
| desc2.dwFlags |= DDSD_MIPMAPCOUNT; | |
| } | |
| /* If no mipmap is given, the texture has only one level */ | |
| /* The first surface is a front buffer, the back buffer is created afterwards */ | |
| if( (desc2.dwFlags & DDSD_CAPS) && (desc2.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE) ) | |
| { | |
| desc2.ddsCaps.dwCaps |= DDSCAPS_FRONTBUFFER; | |
| } | |
| /* The root surface in a cube map is positive x */ | |
| if(desc2.ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP) | |
| { | |
| desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_ALLFACES; | |
| desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEX; | |
| } | |
| /* Create the first surface */ | |
| hr = ddraw_create_surface(ddraw, &desc2, &object, 0); | |
| if (FAILED(hr)) | |
| { | |
| WARN("ddraw_create_surface failed, hr %#x.\n", hr); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| object->is_complex_root = TRUE; | |
| *Surf = (IDirectDrawSurface7 *)object; | |
| /* Create Additional surfaces if necessary | |
| * This applies to Primary surfaces which have a back buffer count | |
| * set, but not to mipmap textures. In case of Mipmap textures, | |
| * wineD3D takes care of the creation of additional surfaces | |
| */ | |
| if(DDSD->dwFlags & DDSD_BACKBUFFERCOUNT) | |
| { | |
| extra_surfaces = DDSD->dwBackBufferCount; | |
| desc2.ddsCaps.dwCaps &= ~DDSCAPS_FRONTBUFFER; /* It's not a front buffer */ | |
| desc2.ddsCaps.dwCaps |= DDSCAPS_BACKBUFFER; | |
| desc2.dwBackBufferCount = 0; | |
| } | |
| hr = DD_OK; | |
| if(desc2.ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP) | |
| { | |
| desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_ALLFACES; | |
| desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEZ; | |
| hr |= CreateAdditionalSurfaces(ddraw, object, extra_surfaces + 1, desc2, TRUE); | |
| desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_NEGATIVEZ; | |
| desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEZ; | |
| hr |= CreateAdditionalSurfaces(ddraw, object, extra_surfaces + 1, desc2, TRUE); | |
| desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_POSITIVEZ; | |
| desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEY; | |
| hr |= CreateAdditionalSurfaces(ddraw, object, extra_surfaces + 1, desc2, TRUE); | |
| desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_NEGATIVEY; | |
| desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEY; | |
| hr |= CreateAdditionalSurfaces(ddraw, object, extra_surfaces + 1, desc2, TRUE); | |
| desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_POSITIVEY; | |
| desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEX; | |
| hr |= CreateAdditionalSurfaces(ddraw, object, extra_surfaces + 1, desc2, TRUE); | |
| desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_NEGATIVEX; | |
| desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEX; | |
| } | |
| hr |= CreateAdditionalSurfaces(ddraw, object, extra_surfaces, desc2, FALSE); | |
| if(hr != DD_OK) | |
| { | |
| /* This destroys and possibly created surfaces too */ | |
| IDirectDrawSurface_Release((IDirectDrawSurface7 *)object); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| /* If the implementation is OpenGL and there's no d3ddevice, attach a d3ddevice | |
| * But attach the d3ddevice only if the currently created surface was | |
| * a primary surface (2D app in 3D mode) or a 3DDEVICE surface (3D app) | |
| * The only case I can think of where this doesn't apply is when a | |
| * 2D app was configured by the user to run with OpenGL and it didn't create | |
| * the render target as first surface. In this case the render target creation | |
| * will cause the 3D init. | |
| */ | |
| if( (ddraw->ImplType == SURFACE_OPENGL) && !(ddraw->d3d_initialized) && | |
| desc2.ddsCaps.dwCaps & (DDSCAPS_PRIMARYSURFACE | DDSCAPS_3DDEVICE) ) | |
| { | |
| IDirectDrawSurfaceImpl *target = object, *surface; | |
| struct list *entry; | |
| /* Search for the primary to use as render target */ | |
| LIST_FOR_EACH(entry, &ddraw->surface_list) | |
| { | |
| surface = LIST_ENTRY(entry, IDirectDrawSurfaceImpl, surface_list_entry); | |
| if((surface->surface_desc.ddsCaps.dwCaps & (DDSCAPS_PRIMARYSURFACE | DDSCAPS_FRONTBUFFER)) == | |
| (DDSCAPS_PRIMARYSURFACE | DDSCAPS_FRONTBUFFER)) | |
| { | |
| /* found */ | |
| target = surface; | |
| TRACE("Using primary %p as render target\n", target); | |
| break; | |
| } | |
| } | |
| TRACE("(%p) Attaching a D3DDevice, rendertarget = %p\n", ddraw, target); | |
| hr = ddraw_attach_d3d_device(ddraw, target); | |
| if (hr != D3D_OK) | |
| { | |
| IDirectDrawSurfaceImpl *release_surf; | |
| ERR("ddraw_attach_d3d_device failed, hr %#x\n", hr); | |
| *Surf = NULL; | |
| /* The before created surface structures are in an incomplete state here. | |
| * WineD3D holds the reference on the IParents, and it released them on the failure | |
| * already. So the regular release method implementation would fail on the attempt | |
| * to destroy either the IParents or the swapchain. So free the surface here. | |
| * The surface structure here is a list, not a tree, because onscreen targets | |
| * cannot be cube textures | |
| */ | |
| while(object) | |
| { | |
| release_surf = object; | |
| object = object->complex_array[0]; | |
| ddraw_surface_destroy(release_surf); | |
| } | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| } | |
| else if(!(ddraw->d3d_initialized) && desc2.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE) | |
| { | |
| ddraw_create_gdi_swapchain(ddraw, object); | |
| } | |
| /* Addref the ddraw interface to keep an reference for each surface */ | |
| IDirectDraw7_AddRef(&ddraw->IDirectDraw7_iface); | |
| object->ifaceToRelease = (IUnknown *)&ddraw->IDirectDraw7_iface; | |
| /* Create a WineD3DTexture if a texture was requested */ | |
| if (desc2.ddsCaps.dwCaps & DDSCAPS_TEXTURE) | |
| { | |
| ddraw->tex_root = object; | |
| ddraw_surface_create_texture(object); | |
| ddraw->tex_root = NULL; | |
| } | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw7_CreateSurface(IDirectDraw7 *iface, DDSURFACEDESC2 *surface_desc, | |
| IDirectDrawSurface7 **surface, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| TRACE("iface %p, surface_desc %p, surface %p, outer_unknown %p.\n", | |
| iface, surface_desc, surface, outer_unknown); | |
| if(surface_desc == NULL || surface_desc->dwSize != sizeof(DDSURFACEDESC2)) | |
| { | |
| WARN("Application supplied invalid surface descriptor\n"); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| if(surface_desc->ddsCaps.dwCaps & (DDSCAPS_FRONTBUFFER | DDSCAPS_BACKBUFFER)) | |
| { | |
| if (TRACE_ON(ddraw)) | |
| { | |
| TRACE(" (%p) Requesting surface desc :\n", iface); | |
| DDRAW_dump_surface_desc(surface_desc); | |
| } | |
| WARN("Application tried to create an explicit front or back buffer\n"); | |
| return DDERR_INVALIDCAPS; | |
| } | |
| return CreateSurface(This, surface_desc, surface, outer_unknown); | |
| } | |
| static HRESULT WINAPI ddraw4_CreateSurface(IDirectDraw4 *iface, | |
| DDSURFACEDESC2 *surface_desc, IDirectDrawSurface4 **surface, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| IDirectDrawSurfaceImpl *impl; | |
| HRESULT hr; | |
| TRACE("iface %p, surface_desc %p, surface %p, outer_unknown %p.\n", | |
| iface, surface_desc, surface, outer_unknown); | |
| if(surface_desc == NULL || surface_desc->dwSize != sizeof(DDSURFACEDESC2)) | |
| { | |
| WARN("Application supplied invalid surface descriptor\n"); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| if(surface_desc->ddsCaps.dwCaps & (DDSCAPS_FRONTBUFFER | DDSCAPS_BACKBUFFER)) | |
| { | |
| if (TRACE_ON(ddraw)) | |
| { | |
| TRACE(" (%p) Requesting surface desc :\n", iface); | |
| DDRAW_dump_surface_desc(surface_desc); | |
| } | |
| WARN("Application tried to create an explicit front or back buffer\n"); | |
| return DDERR_INVALIDCAPS; | |
| } | |
| hr = CreateSurface(This, surface_desc, (IDirectDrawSurface7 **)surface, outer_unknown); | |
| impl = (IDirectDrawSurfaceImpl *)*surface; | |
| if (SUCCEEDED(hr) && impl) | |
| { | |
| ddraw_set_surface_version(impl, 4); | |
| IDirectDraw7_Release(&This->IDirectDraw7_iface); | |
| IDirectDraw4_AddRef(iface); | |
| impl->ifaceToRelease = (IUnknown *)iface; | |
| } | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw3_CreateSurface(IDirectDraw3 *iface, DDSURFACEDESC *surface_desc, | |
| IDirectDrawSurface **surface, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| IDirectDrawSurface7 *surface7; | |
| IDirectDrawSurfaceImpl *impl; | |
| HRESULT hr; | |
| TRACE("iface %p, surface_desc %p, surface %p, outer_unknown %p.\n", | |
| iface, surface_desc, surface, outer_unknown); | |
| if(surface_desc == NULL || surface_desc->dwSize != sizeof(DDSURFACEDESC)) | |
| { | |
| WARN("Application supplied invalid surface descriptor\n"); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| if(surface_desc->ddsCaps.dwCaps & (DDSCAPS_FRONTBUFFER | DDSCAPS_BACKBUFFER)) | |
| { | |
| if (TRACE_ON(ddraw)) | |
| { | |
| TRACE(" (%p) Requesting surface desc :\n", iface); | |
| DDRAW_dump_surface_desc((LPDDSURFACEDESC2)surface_desc); | |
| } | |
| WARN("Application tried to create an explicit front or back buffer\n"); | |
| return DDERR_INVALIDCAPS; | |
| } | |
| hr = CreateSurface(This, (DDSURFACEDESC2 *)surface_desc, &surface7, outer_unknown); | |
| if (FAILED(hr)) | |
| { | |
| *surface = NULL; | |
| return hr; | |
| } | |
| impl = (IDirectDrawSurfaceImpl *)surface7; | |
| *surface = (IDirectDrawSurface *)&impl->IDirectDrawSurface3_vtbl; | |
| ddraw_set_surface_version(impl, 3); | |
| IDirectDraw7_Release(&This->IDirectDraw7_iface); | |
| IDirectDraw3_AddRef(iface); | |
| impl->ifaceToRelease = (IUnknown *)iface; | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw2_CreateSurface(IDirectDraw2 *iface, | |
| DDSURFACEDESC *surface_desc, IDirectDrawSurface **surface, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| IDirectDrawSurface7 *surface7; | |
| IDirectDrawSurfaceImpl *impl; | |
| HRESULT hr; | |
| TRACE("iface %p, surface_desc %p, surface %p, outer_unknown %p.\n", | |
| iface, surface_desc, surface, outer_unknown); | |
| if(surface_desc == NULL || surface_desc->dwSize != sizeof(DDSURFACEDESC)) | |
| { | |
| WARN("Application supplied invalid surface descriptor\n"); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| if(surface_desc->ddsCaps.dwCaps & (DDSCAPS_FRONTBUFFER | DDSCAPS_BACKBUFFER)) | |
| { | |
| if (TRACE_ON(ddraw)) | |
| { | |
| TRACE(" (%p) Requesting surface desc :\n", iface); | |
| DDRAW_dump_surface_desc((LPDDSURFACEDESC2)surface_desc); | |
| } | |
| WARN("Application tried to create an explicit front or back buffer\n"); | |
| return DDERR_INVALIDCAPS; | |
| } | |
| hr = CreateSurface(This, (DDSURFACEDESC2 *)surface_desc, &surface7, outer_unknown); | |
| if (FAILED(hr)) | |
| { | |
| *surface = NULL; | |
| return hr; | |
| } | |
| impl = (IDirectDrawSurfaceImpl *)surface7; | |
| *surface = (IDirectDrawSurface *)&impl->IDirectDrawSurface3_vtbl; | |
| ddraw_set_surface_version(impl, 2); | |
| IDirectDraw7_Release(&This->IDirectDraw7_iface); | |
| impl->ifaceToRelease = NULL; | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw1_CreateSurface(IDirectDraw *iface, | |
| DDSURFACEDESC *surface_desc, IDirectDrawSurface **surface, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| IDirectDrawSurface7 *surface7; | |
| IDirectDrawSurfaceImpl *impl; | |
| HRESULT hr; | |
| TRACE("iface %p, surface_desc %p, surface %p, outer_unknown %p.\n", | |
| iface, surface_desc, surface, outer_unknown); | |
| if(surface_desc == NULL || surface_desc->dwSize != sizeof(DDSURFACEDESC)) | |
| { | |
| WARN("Application supplied invalid surface descriptor\n"); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| /* Remove front buffer flag, this causes failure in v7, and its added to normal | |
| * primaries anyway. */ | |
| surface_desc->ddsCaps.dwCaps &= ~DDSCAPS_FRONTBUFFER; | |
| hr = CreateSurface(This, (DDSURFACEDESC2 *)surface_desc, &surface7, outer_unknown); | |
| if (FAILED(hr)) | |
| { | |
| *surface = NULL; | |
| return hr; | |
| } | |
| impl = (IDirectDrawSurfaceImpl *)surface7; | |
| *surface = (IDirectDrawSurface *)&impl->IDirectDrawSurface3_vtbl; | |
| ddraw_set_surface_version(impl, 1); | |
| IDirectDraw7_Release(&This->IDirectDraw7_iface); | |
| impl->ifaceToRelease = NULL; | |
| return hr; | |
| } | |
| #define DDENUMSURFACES_SEARCHTYPE (DDENUMSURFACES_CANBECREATED|DDENUMSURFACES_DOESEXIST) | |
| #define DDENUMSURFACES_MATCHTYPE (DDENUMSURFACES_ALL|DDENUMSURFACES_MATCH|DDENUMSURFACES_NOMATCH) | |
| static BOOL | |
| Main_DirectDraw_DDPIXELFORMAT_Match(const DDPIXELFORMAT *requested, | |
| const DDPIXELFORMAT *provided) | |
| { | |
| /* Some flags must be present in both or neither for a match. */ | |
| static const DWORD must_match = DDPF_PALETTEINDEXED1 | DDPF_PALETTEINDEXED2 | |
| | DDPF_PALETTEINDEXED4 | DDPF_PALETTEINDEXED8 | DDPF_FOURCC | |
| | DDPF_ZBUFFER | DDPF_STENCILBUFFER; | |
| if ((requested->dwFlags & provided->dwFlags) != requested->dwFlags) | |
| return FALSE; | |
| if ((requested->dwFlags & must_match) != (provided->dwFlags & must_match)) | |
| return FALSE; | |
| if (requested->dwFlags & DDPF_FOURCC) | |
| if (requested->dwFourCC != provided->dwFourCC) | |
| return FALSE; | |
| if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_ZBUFFER|DDPF_ALPHA | |
| |DDPF_LUMINANCE|DDPF_BUMPDUDV)) | |
| if (requested->u1.dwRGBBitCount != provided->u1.dwRGBBitCount) | |
| return FALSE; | |
| if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_STENCILBUFFER | |
| |DDPF_LUMINANCE|DDPF_BUMPDUDV)) | |
| if (requested->u2.dwRBitMask != provided->u2.dwRBitMask) | |
| return FALSE; | |
| if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_ZBUFFER|DDPF_BUMPDUDV)) | |
| if (requested->u3.dwGBitMask != provided->u3.dwGBitMask) | |
| return FALSE; | |
| /* I could be wrong about the bumpmapping. MSDN docs are vague. */ | |
| if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_STENCILBUFFER | |
| |DDPF_BUMPDUDV)) | |
| if (requested->u4.dwBBitMask != provided->u4.dwBBitMask) | |
| return FALSE; | |
| if (requested->dwFlags & (DDPF_ALPHAPIXELS|DDPF_ZPIXELS)) | |
| if (requested->u5.dwRGBAlphaBitMask != provided->u5.dwRGBAlphaBitMask) | |
| return FALSE; | |
| return TRUE; | |
| } | |
| static BOOL ddraw_match_surface_desc(const DDSURFACEDESC2 *requested, const DDSURFACEDESC2 *provided) | |
| { | |
| struct compare_info | |
| { | |
| DWORD flag; | |
| ptrdiff_t offset; | |
| size_t size; | |
| }; | |
| #define CMP(FLAG, FIELD) \ | |
| { DDSD_##FLAG, offsetof(DDSURFACEDESC2, FIELD), \ | |
| sizeof(((DDSURFACEDESC2 *)(NULL))->FIELD) } | |
| static const struct compare_info compare[] = | |
| { | |
| CMP(ALPHABITDEPTH, dwAlphaBitDepth), | |
| CMP(BACKBUFFERCOUNT, dwBackBufferCount), | |
| CMP(CAPS, ddsCaps), | |
| CMP(CKDESTBLT, ddckCKDestBlt), | |
| CMP(CKDESTOVERLAY, u3 /* ddckCKDestOverlay */), | |
| CMP(CKSRCBLT, ddckCKSrcBlt), | |
| CMP(CKSRCOVERLAY, ddckCKSrcOverlay), | |
| CMP(HEIGHT, dwHeight), | |
| CMP(LINEARSIZE, u1 /* dwLinearSize */), | |
| CMP(LPSURFACE, lpSurface), | |
| CMP(MIPMAPCOUNT, u2 /* dwMipMapCount */), | |
| CMP(PITCH, u1 /* lPitch */), | |
| /* PIXELFORMAT: manual */ | |
| CMP(REFRESHRATE, u2 /* dwRefreshRate */), | |
| CMP(TEXTURESTAGE, dwTextureStage), | |
| CMP(WIDTH, dwWidth), | |
| /* ZBUFFERBITDEPTH: "obsolete" */ | |
| }; | |
| #undef CMP | |
| unsigned int i; | |
| if ((requested->dwFlags & provided->dwFlags) != requested->dwFlags) | |
| return FALSE; | |
| for (i=0; i < sizeof(compare)/sizeof(compare[0]); i++) | |
| { | |
| if (requested->dwFlags & compare[i].flag | |
| && memcmp((const char *)provided + compare[i].offset, | |
| (const char *)requested + compare[i].offset, | |
| compare[i].size) != 0) | |
| return FALSE; | |
| } | |
| if (requested->dwFlags & DDSD_PIXELFORMAT) | |
| { | |
| if (!Main_DirectDraw_DDPIXELFORMAT_Match(&requested->u4.ddpfPixelFormat, | |
| &provided->u4.ddpfPixelFormat)) | |
| return FALSE; | |
| } | |
| return TRUE; | |
| } | |
| #undef DDENUMSURFACES_SEARCHTYPE | |
| #undef DDENUMSURFACES_MATCHTYPE | |
| struct surfacescallback_context | |
| { | |
| LPDDENUMSURFACESCALLBACK func; | |
| void *context; | |
| }; | |
| static HRESULT CALLBACK EnumSurfacesCallbackThunk(IDirectDrawSurface7 *surface, | |
| DDSURFACEDESC2 *surface_desc, void *context) | |
| { | |
| struct surfacescallback_context *cbcontext = context; | |
| return cbcontext->func((IDirectDrawSurface *)&((IDirectDrawSurfaceImpl *)surface)->IDirectDrawSurface3_vtbl, | |
| (DDSURFACEDESC *)surface_desc, cbcontext->context); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::EnumSurfaces | |
| * | |
| * Loops through all surfaces attached to this device and calls the | |
| * application callback. This can't be relayed to WineD3DDevice, | |
| * because some WineD3DSurfaces' parents are IParent objects | |
| * | |
| * Params: | |
| * Flags: Some filtering flags. See IDirectDrawImpl_EnumSurfacesCallback | |
| * DDSD: Description to filter for | |
| * Context: Application-provided pointer, it's passed unmodified to the | |
| * Callback function | |
| * Callback: Address to call for each surface | |
| * | |
| * Returns: | |
| * DDERR_INVALIDPARAMS if the callback is NULL | |
| * DD_OK on success | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_EnumSurfaces(IDirectDraw7 *iface, DWORD Flags, | |
| DDSURFACEDESC2 *DDSD, void *Context, LPDDENUMSURFACESCALLBACK7 Callback) | |
| { | |
| /* The surface enumeration is handled by WineDDraw, | |
| * because it keeps track of all surfaces attached to | |
| * it. The filtering is done by our callback function, | |
| * because WineDDraw doesn't handle ddraw-like surface | |
| * caps structures | |
| */ | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| IDirectDrawSurfaceImpl *surf; | |
| BOOL all, nomatch; | |
| DDSURFACEDESC2 desc; | |
| struct list *entry, *entry2; | |
| TRACE("iface %p, flags %#x, surface_desc %p, context %p, callback %p.\n", | |
| iface, Flags, DDSD, Context, Callback); | |
| all = Flags & DDENUMSURFACES_ALL; | |
| nomatch = Flags & DDENUMSURFACES_NOMATCH; | |
| EnterCriticalSection(&ddraw_cs); | |
| if(!Callback) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| /* Use the _SAFE enumeration, the app may destroy enumerated surfaces */ | |
| LIST_FOR_EACH_SAFE(entry, entry2, &This->surface_list) | |
| { | |
| surf = LIST_ENTRY(entry, IDirectDrawSurfaceImpl, surface_list_entry); | |
| if (all || (nomatch != ddraw_match_surface_desc(DDSD, &surf->surface_desc))) | |
| { | |
| desc = surf->surface_desc; | |
| IDirectDrawSurface7_AddRef((IDirectDrawSurface7 *)surf); | |
| if (Callback((IDirectDrawSurface7 *)surf, &desc, Context) != DDENUMRET_OK) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| } | |
| } | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_EnumSurfaces(IDirectDraw4 *iface, DWORD flags, | |
| DDSURFACEDESC2 *surface_desc, void *context, LPDDENUMSURFACESCALLBACK2 callback) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, flags %#x, surface_desc %p, context %p, callback %p.\n", | |
| iface, flags, surface_desc, context, callback); | |
| return ddraw7_EnumSurfaces(&This->IDirectDraw7_iface, flags, surface_desc, context, | |
| (LPDDENUMSURFACESCALLBACK7)callback); | |
| } | |
| static HRESULT WINAPI ddraw3_EnumSurfaces(IDirectDraw3 *iface, DWORD flags, | |
| DDSURFACEDESC *surface_desc, void *context, LPDDENUMSURFACESCALLBACK callback) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| struct surfacescallback_context cbcontext; | |
| TRACE("iface %p, flags %#x, surface_desc %p, context %p, callback %p.\n", | |
| iface, flags, surface_desc, context, callback); | |
| cbcontext.func = callback; | |
| cbcontext.context = context; | |
| return ddraw7_EnumSurfaces(&This->IDirectDraw7_iface, flags, (DDSURFACEDESC2 *)surface_desc, | |
| &cbcontext, EnumSurfacesCallbackThunk); | |
| } | |
| static HRESULT WINAPI ddraw2_EnumSurfaces(IDirectDraw2 *iface, DWORD flags, | |
| DDSURFACEDESC *surface_desc, void *context, LPDDENUMSURFACESCALLBACK callback) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| struct surfacescallback_context cbcontext; | |
| TRACE("iface %p, flags %#x, surface_desc %p, context %p, callback %p.\n", | |
| iface, flags, surface_desc, context, callback); | |
| cbcontext.func = callback; | |
| cbcontext.context = context; | |
| return ddraw7_EnumSurfaces(&This->IDirectDraw7_iface, flags, (DDSURFACEDESC2 *)surface_desc, | |
| &cbcontext, EnumSurfacesCallbackThunk); | |
| } | |
| static HRESULT WINAPI ddraw1_EnumSurfaces(IDirectDraw *iface, DWORD flags, | |
| DDSURFACEDESC *surface_desc, void *context, LPDDENUMSURFACESCALLBACK callback) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| struct surfacescallback_context cbcontext; | |
| TRACE("iface %p, flags %#x, surface_desc %p, context %p, callback %p.\n", | |
| iface, flags, surface_desc, context, callback); | |
| cbcontext.func = callback; | |
| cbcontext.context = context; | |
| return ddraw7_EnumSurfaces(&This->IDirectDraw7_iface, flags, (DDSURFACEDESC2 *)surface_desc, | |
| &cbcontext, EnumSurfacesCallbackThunk); | |
| } | |
| /***************************************************************************** | |
| * DirectDrawCreateClipper (DDRAW.@) | |
| * | |
| * Creates a new IDirectDrawClipper object. | |
| * | |
| * Params: | |
| * Clipper: Address to write the interface pointer to | |
| * UnkOuter: For aggregation support, which ddraw doesn't have. Has to be | |
| * NULL | |
| * | |
| * Returns: | |
| * CLASS_E_NOAGGREGATION if UnkOuter != NULL | |
| * E_OUTOFMEMORY if allocating the object failed | |
| * | |
| *****************************************************************************/ | |
| HRESULT WINAPI | |
| DirectDrawCreateClipper(DWORD Flags, | |
| LPDIRECTDRAWCLIPPER *Clipper, | |
| IUnknown *UnkOuter) | |
| { | |
| IDirectDrawClipperImpl* object; | |
| HRESULT hr; | |
| TRACE("flags %#x, clipper %p, outer_unknown %p.\n", | |
| Flags, Clipper, UnkOuter); | |
| EnterCriticalSection(&ddraw_cs); | |
| if (UnkOuter != NULL) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return CLASS_E_NOAGGREGATION; | |
| } | |
| object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, | |
| sizeof(IDirectDrawClipperImpl)); | |
| if (object == NULL) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return E_OUTOFMEMORY; | |
| } | |
| hr = ddraw_clipper_init(object); | |
| if (FAILED(hr)) | |
| { | |
| WARN("Failed to initialize clipper, hr %#x.\n", hr); | |
| HeapFree(GetProcessHeap(), 0, object); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| TRACE("Created clipper %p.\n", object); | |
| *Clipper = (IDirectDrawClipper *) object; | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::CreateClipper | |
| * | |
| * Creates a DDraw clipper. See DirectDrawCreateClipper for details | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_CreateClipper(IDirectDraw7 *iface, DWORD Flags, | |
| IDirectDrawClipper **Clipper, IUnknown *UnkOuter) | |
| { | |
| TRACE("iface %p, flags %#x, clipper %p, outer_unknown %p.\n", | |
| iface, Flags, Clipper, UnkOuter); | |
| return DirectDrawCreateClipper(Flags, Clipper, UnkOuter); | |
| } | |
| static HRESULT WINAPI ddraw4_CreateClipper(IDirectDraw4 *iface, DWORD flags, | |
| IDirectDrawClipper **clipper, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, flags %#x, clipper %p, outer_unknown %p.\n", | |
| iface, flags, clipper, outer_unknown); | |
| return ddraw7_CreateClipper(&This->IDirectDraw7_iface, flags, clipper, outer_unknown); | |
| } | |
| static HRESULT WINAPI ddraw3_CreateClipper(IDirectDraw3 *iface, DWORD flags, | |
| IDirectDrawClipper **clipper, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| TRACE("iface %p, flags %#x, clipper %p, outer_unknown %p.\n", | |
| iface, flags, clipper, outer_unknown); | |
| return ddraw7_CreateClipper(&This->IDirectDraw7_iface, flags, clipper, outer_unknown); | |
| } | |
| static HRESULT WINAPI ddraw2_CreateClipper(IDirectDraw2 *iface, | |
| DWORD flags, IDirectDrawClipper **clipper, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| TRACE("iface %p, flags %#x, clipper %p, outer_unknown %p.\n", | |
| iface, flags, clipper, outer_unknown); | |
| return ddraw7_CreateClipper(&This->IDirectDraw7_iface, flags, clipper, outer_unknown); | |
| } | |
| static HRESULT WINAPI ddraw1_CreateClipper(IDirectDraw *iface, | |
| DWORD flags, IDirectDrawClipper **clipper, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| TRACE("iface %p, flags %#x, clipper %p, outer_unknown %p.\n", | |
| iface, flags, clipper, outer_unknown); | |
| return ddraw7_CreateClipper(&This->IDirectDraw7_iface, flags, clipper, outer_unknown); | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::CreatePalette | |
| * | |
| * Creates a new IDirectDrawPalette object | |
| * | |
| * Params: | |
| * Flags: The flags for the new clipper | |
| * ColorTable: Color table to assign to the new clipper | |
| * Palette: Address to write the interface pointer to | |
| * UnkOuter: For aggregation support, which ddraw doesn't have. Has to be | |
| * NULL | |
| * | |
| * Returns: | |
| * CLASS_E_NOAGGREGATION if UnkOuter != NULL | |
| * E_OUTOFMEMORY if allocating the object failed | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_CreatePalette(IDirectDraw7 *iface, DWORD Flags, | |
| PALETTEENTRY *ColorTable, IDirectDrawPalette **Palette, IUnknown *pUnkOuter) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw7(iface); | |
| IDirectDrawPaletteImpl *object; | |
| HRESULT hr; | |
| TRACE("iface %p, flags %#x, color_table %p, palette %p, outer_unknown %p.\n", | |
| iface, Flags, ColorTable, Palette, pUnkOuter); | |
| EnterCriticalSection(&ddraw_cs); | |
| if(pUnkOuter != NULL) | |
| { | |
| WARN("pUnkOuter is %p, returning CLASS_E_NOAGGREGATION\n", pUnkOuter); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return CLASS_E_NOAGGREGATION; | |
| } | |
| /* The refcount test shows that a cooplevel is required for this */ | |
| if(!This->cooperative_level) | |
| { | |
| WARN("No cooperative level set, returning DDERR_NOCOOPERATIVELEVELSET\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_NOCOOPERATIVELEVELSET; | |
| } | |
| object = HeapAlloc(GetProcessHeap(), 0, sizeof(IDirectDrawPaletteImpl)); | |
| if(!object) | |
| { | |
| ERR("Out of memory when allocating memory for a palette implementation\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return E_OUTOFMEMORY; | |
| } | |
| hr = ddraw_palette_init(object, This, Flags, ColorTable); | |
| if (FAILED(hr)) | |
| { | |
| WARN("Failed to initialize palette, hr %#x.\n", hr); | |
| HeapFree(GetProcessHeap(), 0, object); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| TRACE("Created palette %p.\n", object); | |
| *Palette = (IDirectDrawPalette *)object; | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DD_OK; | |
| } | |
| static HRESULT WINAPI ddraw4_CreatePalette(IDirectDraw4 *iface, DWORD flags, PALETTEENTRY *entries, | |
| IDirectDrawPalette **palette, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| HRESULT hr; | |
| TRACE("iface %p, flags %#x, entries %p, palette %p, outer_unknown %p.\n", | |
| iface, flags, entries, palette, outer_unknown); | |
| hr = ddraw7_CreatePalette(&This->IDirectDraw7_iface, flags, entries, palette, outer_unknown); | |
| if (SUCCEEDED(hr) && *palette) | |
| { | |
| IDirectDrawPaletteImpl *impl = (IDirectDrawPaletteImpl *)*palette; | |
| IDirectDraw7_Release(&This->IDirectDraw7_iface); | |
| IDirectDraw4_AddRef(iface); | |
| impl->ifaceToRelease = (IUnknown *)iface; | |
| } | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw3_CreatePalette(IDirectDraw3 *iface, DWORD flags, | |
| PALETTEENTRY *entries, IDirectDrawPalette **palette, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| HRESULT hr; | |
| TRACE("iface %p, flags %#x, entries %p, palette %p, outer_unknown %p.\n", | |
| iface, flags, entries, palette, outer_unknown); | |
| hr = ddraw7_CreatePalette(&This->IDirectDraw7_iface, flags, entries, palette, outer_unknown); | |
| if (SUCCEEDED(hr) && *palette) | |
| { | |
| IDirectDrawPaletteImpl *impl = (IDirectDrawPaletteImpl *)*palette; | |
| IDirectDraw7_Release(&This->IDirectDraw7_iface); | |
| IDirectDraw4_AddRef(iface); | |
| impl->ifaceToRelease = (IUnknown *)iface; | |
| } | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw2_CreatePalette(IDirectDraw2 *iface, DWORD flags, | |
| PALETTEENTRY *entries, IDirectDrawPalette **palette, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| HRESULT hr; | |
| TRACE("iface %p, flags %#x, entries %p, palette %p, outer_unknown %p.\n", | |
| iface, flags, entries, palette, outer_unknown); | |
| hr = ddraw7_CreatePalette(&This->IDirectDraw7_iface, flags, entries, palette, outer_unknown); | |
| if (SUCCEEDED(hr) && *palette) | |
| { | |
| IDirectDrawPaletteImpl *impl = (IDirectDrawPaletteImpl *)*palette; | |
| IDirectDraw7_Release(&This->IDirectDraw7_iface); | |
| impl->ifaceToRelease = NULL; | |
| } | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw1_CreatePalette(IDirectDraw *iface, DWORD flags, | |
| PALETTEENTRY *entries, IDirectDrawPalette **palette, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| HRESULT hr; | |
| TRACE("iface %p, flags %#x, entries %p, palette %p, outer_unknown %p.\n", | |
| iface, flags, entries, palette, outer_unknown); | |
| hr = ddraw7_CreatePalette(&This->IDirectDraw7_iface, flags, entries, palette, outer_unknown); | |
| if (SUCCEEDED(hr) && *palette) | |
| { | |
| IDirectDrawPaletteImpl *impl = (IDirectDrawPaletteImpl *)*palette; | |
| IDirectDraw7_Release(&This->IDirectDraw7_iface); | |
| impl->ifaceToRelease = NULL; | |
| } | |
| return hr; | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7::DuplicateSurface | |
| * | |
| * Duplicates a surface. The surface memory points to the same memory as | |
| * the original surface, and it's released when the last surface referencing | |
| * it is released. I guess that's beyond Wine's surface management right now | |
| * (Idea: create a new DDraw surface with the same WineD3DSurface. I need a | |
| * test application to implement this) | |
| * | |
| * Params: | |
| * Src: Address of the source surface | |
| * Dest: Address to write the new surface pointer to | |
| * | |
| * Returns: | |
| * See IDirectDraw7::CreateSurface | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI ddraw7_DuplicateSurface(IDirectDraw7 *iface, | |
| IDirectDrawSurface7 *Src, IDirectDrawSurface7 **Dest) | |
| { | |
| IDirectDrawSurfaceImpl *Surf = (IDirectDrawSurfaceImpl *)Src; | |
| FIXME("iface %p, src %p, dst %p partial stub!\n", iface, Src, Dest); | |
| /* For now, simply create a new, independent surface */ | |
| return IDirectDraw7_CreateSurface(iface, | |
| &Surf->surface_desc, | |
| Dest, | |
| NULL); | |
| } | |
| static HRESULT WINAPI ddraw4_DuplicateSurface(IDirectDraw4 *iface, IDirectDrawSurface4 *src, | |
| IDirectDrawSurface4 **dst) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw4(iface); | |
| TRACE("iface %p, src %p, dst %p.\n", iface, src, dst); | |
| return ddraw7_DuplicateSurface(&This->IDirectDraw7_iface, (IDirectDrawSurface7 *)src, | |
| (IDirectDrawSurface7 **)dst); | |
| } | |
| static HRESULT WINAPI ddraw3_DuplicateSurface(IDirectDraw3 *iface, IDirectDrawSurface *src, | |
| IDirectDrawSurface **dst) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw3(iface); | |
| IDirectDrawSurface7 *src7, *dst7; | |
| HRESULT hr; | |
| TRACE("iface %p, src %p, dst %p.\n", iface, src, dst); | |
| src7 = (IDirectDrawSurface7 *)surface_from_surface3((IDirectDrawSurface3 *)src); | |
| hr = ddraw7_DuplicateSurface(&This->IDirectDraw7_iface, src7, &dst7); | |
| if (FAILED(hr)) | |
| return hr; | |
| *dst = (IDirectDrawSurface *)&((IDirectDrawSurfaceImpl *)dst7)->IDirectDrawSurface3_vtbl; | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw2_DuplicateSurface(IDirectDraw2 *iface, | |
| IDirectDrawSurface *src, IDirectDrawSurface **dst) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw2(iface); | |
| IDirectDrawSurface7 *src7, *dst7; | |
| HRESULT hr; | |
| TRACE("iface %p, src %p, dst %p.\n", iface, src, dst); | |
| src7 = (IDirectDrawSurface7 *)surface_from_surface3((IDirectDrawSurface3 *)src); | |
| hr = ddraw7_DuplicateSurface(&This->IDirectDraw7_iface, src7, &dst7); | |
| if (FAILED(hr)) | |
| return hr; | |
| *dst = (IDirectDrawSurface *)&((IDirectDrawSurfaceImpl *)dst7)->IDirectDrawSurface3_vtbl; | |
| return hr; | |
| } | |
| static HRESULT WINAPI ddraw1_DuplicateSurface(IDirectDraw *iface, IDirectDrawSurface *src, | |
| IDirectDrawSurface **dst) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirectDraw(iface); | |
| IDirectDrawSurface7 *src7, *dst7; | |
| HRESULT hr; | |
| TRACE("iface %p, src %p, dst %p.\n", iface, src, dst); | |
| src7 = (IDirectDrawSurface7 *)surface_from_surface3((IDirectDrawSurface3 *)src); | |
| hr = ddraw7_DuplicateSurface(&This->IDirectDraw7_iface, src7, &dst7); | |
| if (FAILED(hr)) | |
| return hr; | |
| *dst = (IDirectDrawSurface *)&((IDirectDrawSurfaceImpl *)dst7)->IDirectDrawSurface3_vtbl; | |
| return hr; | |
| } | |
| /***************************************************************************** | |
| * IDirect3D7::EnumDevices | |
| * | |
| * The EnumDevices method for IDirect3D7. It enumerates all supported | |
| * D3D7 devices. Currently the T&L, HAL and RGB devices are enumerated. | |
| * | |
| * Params: | |
| * callback: Function to call for each enumerated device | |
| * context: Pointer to pass back to the app | |
| * | |
| * Returns: | |
| * D3D_OK, or the return value of the GetCaps call | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI d3d7_EnumDevices(IDirect3D7 *iface, LPD3DENUMDEVICESCALLBACK7 callback, void *context) | |
| { | |
| char interface_name_tnl[] = "WINE Direct3D7 Hardware Transform and Lighting acceleration using WineD3D"; | |
| char device_name_tnl[] = "Wine D3D7 T&L HAL"; | |
| char interface_name_hal[] = "WINE Direct3D7 Hardware acceleration using WineD3D"; | |
| char device_name_hal[] = "Wine D3D7 HAL"; | |
| char interface_name_rgb[] = "WINE Direct3D7 RGB Software Emulation using WineD3D"; | |
| char device_name_rgb[] = "Wine D3D7 RGB"; | |
| IDirectDrawImpl *This = impl_from_IDirect3D7(iface); | |
| D3DDEVICEDESC7 device_desc7; | |
| D3DDEVICEDESC device_desc1; | |
| HRESULT hr; | |
| TRACE("iface %p, callback %p, context %p.\n", iface, callback, context); | |
| EnterCriticalSection(&ddraw_cs); | |
| hr = IDirect3DImpl_GetCaps(This->wineD3D, &device_desc1, &device_desc7); | |
| if (hr != D3D_OK) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| callback(interface_name_tnl, device_name_tnl, &device_desc7, context); | |
| device_desc7.deviceGUID = IID_IDirect3DHALDevice; | |
| callback(interface_name_hal, device_name_hal, &device_desc7, context); | |
| device_desc7.deviceGUID = IID_IDirect3DRGBDevice; | |
| callback(interface_name_rgb, device_name_rgb, &device_desc7, context); | |
| TRACE("End of enumeration.\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return D3D_OK; | |
| } | |
| /***************************************************************************** | |
| * IDirect3D3::EnumDevices | |
| * | |
| * Enumerates all supported Direct3DDevice interfaces. This is the | |
| * implementation for Direct3D 1 to Direc3D 3, Version 7 has its own. | |
| * | |
| * Version 1, 2 and 3 | |
| * | |
| * Params: | |
| * callback: Application-provided routine to call for each enumerated device | |
| * Context: Pointer to pass to the callback | |
| * | |
| * Returns: | |
| * D3D_OK on success, | |
| * The result of IDirect3DImpl_GetCaps if it failed | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI d3d3_EnumDevices(IDirect3D3 *iface, LPD3DENUMDEVICESCALLBACK callback, void *context) | |
| { | |
| static CHAR wined3d_description[] = "Wine D3DDevice using WineD3D and OpenGL"; | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| D3DDEVICEDESC device_desc1, hal_desc, hel_desc; | |
| D3DDEVICEDESC7 device_desc7; | |
| HRESULT hr; | |
| /* Some games (Motoracer 2 demo) have the bad idea to modify the device | |
| * name string. Let's put the string in a sufficiently sized array in | |
| * writable memory. */ | |
| char device_name[50]; | |
| strcpy(device_name,"Direct3D HEL"); | |
| TRACE("iface %p, callback %p, context %p.\n", iface, callback, context); | |
| EnterCriticalSection(&ddraw_cs); | |
| hr = IDirect3DImpl_GetCaps(This->wineD3D, &device_desc1, &device_desc7); | |
| if (hr != D3D_OK) | |
| { | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| /* Do I have to enumerate the reference id? Note from old d3d7: | |
| * "It seems that enumerating the reference IID on Direct3D 1 games | |
| * (AvP / Motoracer2) breaks them". So do not enumerate this iid in V1 | |
| * | |
| * There's a registry key HKLM\Software\Microsoft\Direct3D\Drivers, | |
| * EnumReference which enables / disables enumerating the reference | |
| * rasterizer. It's a DWORD, 0 means disabled, 2 means enabled. The | |
| * enablerefrast.reg and disablerefrast.reg files in the DirectX 7.0 sdk | |
| * demo directory suggest this. | |
| * | |
| * Some games(GTA 2) seem to use the second enumerated device, so I have | |
| * to enumerate at least 2 devices. So enumerate the reference device to | |
| * have 2 devices. | |
| * | |
| * Other games (Rollcage) tell emulation and hal device apart by certain | |
| * flags. Rollcage expects D3DPTEXTURECAPS_POW2 to be set (yeah, it is a | |
| * limitation flag), and it refuses all devices that have the perspective | |
| * flag set. This way it refuses the emulation device, and HAL devices | |
| * never have POW2 unset in d3d7 on windows. */ | |
| if (This->d3dversion != 1) | |
| { | |
| static CHAR reference_description[] = "RGB Direct3D emulation"; | |
| TRACE("Enumerating WineD3D D3DDevice interface.\n"); | |
| hal_desc = device_desc1; | |
| hel_desc = device_desc1; | |
| /* The rgb device has the pow2 flag set in the hel caps, but not in the hal caps. */ | |
| hal_desc.dpcLineCaps.dwTextureCaps &= ~(D3DPTEXTURECAPS_POW2 | |
| | D3DPTEXTURECAPS_NONPOW2CONDITIONAL | D3DPTEXTURECAPS_PERSPECTIVE); | |
| hal_desc.dpcTriCaps.dwTextureCaps &= ~(D3DPTEXTURECAPS_POW2 | |
| | D3DPTEXTURECAPS_NONPOW2CONDITIONAL | D3DPTEXTURECAPS_PERSPECTIVE); | |
| hr = callback((GUID *)&IID_IDirect3DRGBDevice, reference_description, | |
| device_name, &hal_desc, &hel_desc, context); | |
| if (hr != D3DENUMRET_OK) | |
| { | |
| TRACE("Application cancelled the enumeration.\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return D3D_OK; | |
| } | |
| } | |
| strcpy(device_name,"Direct3D HAL"); | |
| TRACE("Enumerating HAL Direct3D device.\n"); | |
| hal_desc = device_desc1; | |
| hel_desc = device_desc1; | |
| /* The hal device does not have the pow2 flag set in hel, but in hal. */ | |
| hel_desc.dpcLineCaps.dwTextureCaps &= ~(D3DPTEXTURECAPS_POW2 | |
| | D3DPTEXTURECAPS_NONPOW2CONDITIONAL | D3DPTEXTURECAPS_PERSPECTIVE); | |
| hel_desc.dpcTriCaps.dwTextureCaps &= ~(D3DPTEXTURECAPS_POW2 | |
| | D3DPTEXTURECAPS_NONPOW2CONDITIONAL | D3DPTEXTURECAPS_PERSPECTIVE); | |
| hr = callback((GUID *)&IID_IDirect3DHALDevice, wined3d_description, | |
| device_name, &hal_desc, &hel_desc, context); | |
| if (hr != D3DENUMRET_OK) | |
| { | |
| TRACE("Application cancelled the enumeration.\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return D3D_OK; | |
| } | |
| TRACE("End of enumeration.\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return D3D_OK; | |
| } | |
| static HRESULT WINAPI d3d2_EnumDevices(IDirect3D2 *iface, LPD3DENUMDEVICESCALLBACK callback, void *context) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D2(iface); | |
| TRACE("iface %p, callback %p, context %p.\n", iface, callback, context); | |
| return d3d3_EnumDevices(&This->IDirect3D3_iface, callback, context); | |
| } | |
| static HRESULT WINAPI d3d1_EnumDevices(IDirect3D *iface, LPD3DENUMDEVICESCALLBACK callback, void *context) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D(iface); | |
| TRACE("iface %p, callback %p, context %p.\n", iface, callback, context); | |
| return d3d3_EnumDevices(&This->IDirect3D3_iface, callback, context); | |
| } | |
| /***************************************************************************** | |
| * IDirect3D3::CreateLight | |
| * | |
| * Creates an IDirect3DLight interface. This interface is used in | |
| * Direct3D3 or earlier for lighting. In Direct3D7 it has been replaced | |
| * by the DIRECT3DLIGHT7 structure. Wine's Direct3DLight implementation | |
| * uses the IDirect3DDevice7 interface with D3D7 lights. | |
| * | |
| * Version 1, 2 and 3 | |
| * | |
| * Params: | |
| * light: Address to store the new interface pointer | |
| * outer_unknown: Basically for aggregation, but ddraw doesn't support it. | |
| * Must be NULL | |
| * | |
| * Returns: | |
| * D3D_OK on success | |
| * DDERR_OUTOFMEMORY if memory allocation failed | |
| * CLASS_E_NOAGGREGATION if outer_unknown != NULL | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI d3d3_CreateLight(IDirect3D3 *iface, IDirect3DLight **light, | |
| IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| IDirect3DLightImpl *object; | |
| TRACE("iface %p, light %p, outer_unknown %p.\n", iface, light, outer_unknown); | |
| if (outer_unknown) return CLASS_E_NOAGGREGATION; | |
| object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*object)); | |
| if (!object) | |
| { | |
| ERR("Failed to allocate light memory.\n"); | |
| return DDERR_OUTOFMEMORY; | |
| } | |
| d3d_light_init(object, This); | |
| TRACE("Created light %p.\n", object); | |
| *light = (IDirect3DLight *)object; | |
| return D3D_OK; | |
| } | |
| static HRESULT WINAPI d3d2_CreateLight(IDirect3D2 *iface, IDirect3DLight **light, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D2(iface); | |
| TRACE("iface %p, light %p, outer_unknown %p.\n", iface, light, outer_unknown); | |
| return d3d3_CreateLight(&This->IDirect3D3_iface, light, outer_unknown); | |
| } | |
| static HRESULT WINAPI d3d1_CreateLight(IDirect3D *iface, IDirect3DLight **light, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D(iface); | |
| TRACE("iface %p, light %p, outer_unknown %p.\n", iface, light, outer_unknown); | |
| return d3d3_CreateLight(&This->IDirect3D3_iface, light, outer_unknown); | |
| } | |
| /***************************************************************************** | |
| * IDirect3D3::CreateMaterial | |
| * | |
| * Creates an IDirect3DMaterial interface. This interface is used by Direct3D3 | |
| * and older versions. The IDirect3DMaterial implementation wraps its | |
| * functionality to IDirect3DDevice7::SetMaterial and friends. | |
| * | |
| * Version 1, 2 and 3 | |
| * | |
| * Params: | |
| * material: Address to store the new interface's pointer to | |
| * outer_unknown: Basically for aggregation, but ddraw doesn't support it. | |
| * Must be NULL | |
| * | |
| * Returns: | |
| * D3D_OK on success | |
| * DDERR_OUTOFMEMORY if memory allocation failed | |
| * CLASS_E_NOAGGREGATION if outer_unknown != NULL | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI d3d3_CreateMaterial(IDirect3D3 *iface, IDirect3DMaterial3 **material, | |
| IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| IDirect3DMaterialImpl *object; | |
| TRACE("iface %p, material %p, outer_unknown %p.\n", iface, material, outer_unknown); | |
| if (outer_unknown) return CLASS_E_NOAGGREGATION; | |
| object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*object)); | |
| if (!object) | |
| { | |
| ERR("Failed to allocate material memory.\n"); | |
| return DDERR_OUTOFMEMORY; | |
| } | |
| d3d_material_init(object, This); | |
| TRACE("Created material %p.\n", object); | |
| *material = (IDirect3DMaterial3 *)object; | |
| return D3D_OK; | |
| } | |
| static HRESULT WINAPI d3d2_CreateMaterial(IDirect3D2 *iface, IDirect3DMaterial2 **material, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D2(iface); | |
| IDirect3DMaterial3 *material3; | |
| HRESULT hr; | |
| TRACE("iface %p, material %p, outer_unknown %p.\n", iface, material, outer_unknown); | |
| hr = d3d3_CreateMaterial(&This->IDirect3D3_iface, &material3, outer_unknown); | |
| *material = material3 ? (IDirect3DMaterial2 *)&((IDirect3DMaterialImpl *)material3)->IDirect3DMaterial2_vtbl : NULL; | |
| TRACE("Returning material %p.\n", *material); | |
| return hr; | |
| } | |
| static HRESULT WINAPI d3d1_CreateMaterial(IDirect3D *iface, IDirect3DMaterial **material, IUnknown *outer_unknown) | |
| { | |
| IDirect3DMaterial3 *material3; | |
| HRESULT hr; | |
| IDirectDrawImpl *This = impl_from_IDirect3D(iface); | |
| TRACE("iface %p, material %p, outer_unknown %p.\n", iface, material, outer_unknown); | |
| hr = d3d3_CreateMaterial(&This->IDirect3D3_iface, &material3, outer_unknown); | |
| *material = material3 ? (IDirect3DMaterial *)&((IDirect3DMaterialImpl *)material3)->IDirect3DMaterial_vtbl : NULL; | |
| TRACE("Returning material %p.\n", *material); | |
| return hr; | |
| } | |
| /***************************************************************************** | |
| * IDirect3D3::CreateViewport | |
| * | |
| * Creates an IDirect3DViewport interface. This interface is used | |
| * by Direct3D and earlier versions for Viewport management. In Direct3D7 | |
| * it has been replaced by a viewport structure and | |
| * IDirect3DDevice7::*Viewport. Wine's IDirect3DViewport implementation | |
| * uses the IDirect3DDevice7 methods for its functionality | |
| * | |
| * Params: | |
| * Viewport: Address to store the new interface pointer | |
| * outer_unknown: Basically for aggregation, but ddraw doesn't support it. | |
| * Must be NULL | |
| * | |
| * Returns: | |
| * D3D_OK on success | |
| * DDERR_OUTOFMEMORY if memory allocation failed | |
| * CLASS_E_NOAGGREGATION if outer_unknown != NULL | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI d3d3_CreateViewport(IDirect3D3 *iface, IDirect3DViewport3 **viewport, | |
| IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| IDirect3DViewportImpl *object; | |
| TRACE("iface %p, viewport %p, outer_unknown %p.\n", iface, viewport, outer_unknown); | |
| if (outer_unknown) return CLASS_E_NOAGGREGATION; | |
| object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*object)); | |
| if (!object) | |
| { | |
| ERR("Failed to allocate viewport memory.\n"); | |
| return DDERR_OUTOFMEMORY; | |
| } | |
| d3d_viewport_init(object, This); | |
| TRACE("Created viewport %p.\n", object); | |
| *viewport = (IDirect3DViewport3 *)object; | |
| return D3D_OK; | |
| } | |
| static HRESULT WINAPI d3d2_CreateViewport(IDirect3D2 *iface, IDirect3DViewport2 **viewport, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D2(iface); | |
| TRACE("iface %p, viewport %p, outer_unknown %p.\n", iface, viewport, outer_unknown); | |
| return d3d3_CreateViewport(&This->IDirect3D3_iface, (IDirect3DViewport3 **)viewport, | |
| outer_unknown); | |
| } | |
| static HRESULT WINAPI d3d1_CreateViewport(IDirect3D *iface, IDirect3DViewport **viewport, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D(iface); | |
| TRACE("iface %p, viewport %p, outer_unknown %p.\n", iface, viewport, outer_unknown); | |
| return d3d3_CreateViewport(&This->IDirect3D3_iface, (IDirect3DViewport3 **)viewport, | |
| outer_unknown); | |
| } | |
| /***************************************************************************** | |
| * IDirect3D3::FindDevice | |
| * | |
| * This method finds a device with the requested properties and returns a | |
| * device description | |
| * | |
| * Verion 1, 2 and 3 | |
| * Params: | |
| * fds: Describes the requested device characteristics | |
| * fdr: Returns the device description | |
| * | |
| * Returns: | |
| * D3D_OK on success | |
| * DDERR_INVALIDPARAMS if no device was found | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI d3d3_FindDevice(IDirect3D3 *iface, D3DFINDDEVICESEARCH *fds, D3DFINDDEVICERESULT *fdr) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| D3DDEVICEDESC7 desc7; | |
| D3DDEVICEDESC desc1; | |
| HRESULT hr; | |
| TRACE("iface %p, fds %p, fdr %p.\n", iface, fds, fdr); | |
| if (!fds || !fdr) return DDERR_INVALIDPARAMS; | |
| if (fds->dwSize != sizeof(D3DFINDDEVICESEARCH) | |
| || fdr->dwSize != sizeof(D3DFINDDEVICERESULT)) | |
| return DDERR_INVALIDPARAMS; | |
| if ((fds->dwFlags & D3DFDS_COLORMODEL) | |
| && fds->dcmColorModel != D3DCOLOR_RGB) | |
| { | |
| WARN("Trying to request a non-RGB D3D color model. Not supported.\n"); | |
| return DDERR_INVALIDPARAMS; /* No real idea what to return here :-) */ | |
| } | |
| if (fds->dwFlags & D3DFDS_GUID) | |
| { | |
| TRACE("Trying to match guid %s.\n", debugstr_guid(&(fds->guid))); | |
| if (!IsEqualGUID(&IID_D3DDEVICE_WineD3D, &fds->guid) | |
| && !IsEqualGUID(&IID_IDirect3DHALDevice, &fds->guid) | |
| && !IsEqualGUID(&IID_IDirect3DRGBDevice, &fds->guid)) | |
| { | |
| WARN("No match for this GUID.\n"); | |
| return DDERR_NOTFOUND; | |
| } | |
| } | |
| /* Get the caps */ | |
| hr = IDirect3DImpl_GetCaps(This->wineD3D, &desc1, &desc7); | |
| if (hr != D3D_OK) return hr; | |
| /* Now return our own GUID */ | |
| fdr->guid = IID_D3DDEVICE_WineD3D; | |
| fdr->ddHwDesc = desc1; | |
| fdr->ddSwDesc = desc1; | |
| TRACE("Returning Wine's wined3d device with (undumped) capabilities.\n"); | |
| return D3D_OK; | |
| } | |
| static HRESULT WINAPI d3d2_FindDevice(IDirect3D2 *iface, D3DFINDDEVICESEARCH *fds, D3DFINDDEVICERESULT *fdr) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D2(iface); | |
| TRACE("iface %p, fds %p, fdr %p.\n", iface, fds, fdr); | |
| return d3d3_FindDevice(&This->IDirect3D3_iface, fds, fdr); | |
| } | |
| static HRESULT WINAPI d3d1_FindDevice(IDirect3D *iface, D3DFINDDEVICESEARCH *fds, D3DFINDDEVICERESULT *fdr) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D(iface); | |
| TRACE("iface %p, fds %p, fdr %p.\n", iface, fds, fdr); | |
| return d3d3_FindDevice(&This->IDirect3D3_iface, fds, fdr); | |
| } | |
| /***************************************************************************** | |
| * IDirect3D7::CreateDevice | |
| * | |
| * Creates an IDirect3DDevice7 interface. | |
| * | |
| * Version 2, 3 and 7. IDirect3DDevice 1 interfaces are interfaces to | |
| * DirectDraw surfaces and are created with | |
| * IDirectDrawSurface::QueryInterface. This method uses CreateDevice to | |
| * create the device object and QueryInterfaces for IDirect3DDevice | |
| * | |
| * Params: | |
| * refiid: IID of the device to create | |
| * Surface: Initial rendertarget | |
| * Device: Address to return the interface pointer | |
| * | |
| * Returns: | |
| * D3D_OK on success | |
| * DDERR_OUTOFMEMORY if memory allocation failed | |
| * DDERR_INVALIDPARAMS if a device exists already | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI d3d7_CreateDevice(IDirect3D7 *iface, REFCLSID riid, | |
| IDirectDrawSurface7 *surface, IDirect3DDevice7 **device) | |
| { | |
| IDirectDrawSurfaceImpl *target = (IDirectDrawSurfaceImpl *)surface; | |
| IDirectDrawImpl *This = impl_from_IDirect3D7(iface); | |
| IDirect3DDeviceImpl *object; | |
| HRESULT hr; | |
| TRACE("iface %p, riid %s, surface %p, device %p.\n", iface, debugstr_guid(riid), surface, device); | |
| EnterCriticalSection(&ddraw_cs); | |
| *device = NULL; | |
| /* Fail device creation if non-opengl surfaces are used. */ | |
| if (This->ImplType != SURFACE_OPENGL) | |
| { | |
| ERR("The application wants to create a Direct3D device, but non-opengl surfaces are set in the registry.\n"); | |
| ERR("Please set the surface implementation to opengl or autodetection to allow 3D rendering.\n"); | |
| /* We only hit this path if a default surface is set in the registry. Incorrect autodetection | |
| * is caught in CreateSurface or QueryInterface. */ | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_NO3D; | |
| } | |
| if (This->d3ddevice) | |
| { | |
| FIXME("Only one Direct3D device per DirectDraw object supported.\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_INVALIDPARAMS; | |
| } | |
| object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*object)); | |
| if (!object) | |
| { | |
| ERR("Failed to allocate device memory.\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return DDERR_OUTOFMEMORY; | |
| } | |
| hr = d3d_device_init(object, This, target); | |
| if (FAILED(hr)) | |
| { | |
| WARN("Failed to initialize device, hr %#x.\n", hr); | |
| HeapFree(GetProcessHeap(), 0, object); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return hr; | |
| } | |
| TRACE("Created device %p.\n", object); | |
| *device = (IDirect3DDevice7 *)object; | |
| LeaveCriticalSection(&ddraw_cs); | |
| return D3D_OK; | |
| } | |
| static HRESULT WINAPI d3d3_CreateDevice(IDirect3D3 *iface, REFCLSID riid, | |
| IDirectDrawSurface4 *surface, IDirect3DDevice3 **device, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| HRESULT hr; | |
| TRACE("iface %p, riid %s, surface %p, device %p, outer_unknown %p.\n", | |
| iface, debugstr_guid(riid), surface, device, outer_unknown); | |
| if (outer_unknown) return CLASS_E_NOAGGREGATION; | |
| hr = d3d7_CreateDevice(&This->IDirect3D7_iface, riid, (IDirectDrawSurface7 *)surface, | |
| (IDirect3DDevice7 **)device); | |
| if (*device) *device = (IDirect3DDevice3 *)&((IDirect3DDeviceImpl *)*device)->IDirect3DDevice3_vtbl; | |
| return hr; | |
| } | |
| static HRESULT WINAPI d3d2_CreateDevice(IDirect3D2 *iface, REFCLSID riid, | |
| IDirectDrawSurface *surface, IDirect3DDevice2 **device) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D2(iface); | |
| HRESULT hr; | |
| TRACE("iface %p, riid %s, surface %p, device %p.\n", | |
| iface, debugstr_guid(riid), surface, device); | |
| hr = d3d7_CreateDevice(&This->IDirect3D7_iface, riid, | |
| surface ? (IDirectDrawSurface7 *)surface_from_surface3((IDirectDrawSurface3 *)surface) : NULL, | |
| (IDirect3DDevice7 **)device); | |
| if (*device) *device = (IDirect3DDevice2 *)&((IDirect3DDeviceImpl *)*device)->IDirect3DDevice2_vtbl; | |
| return hr; | |
| } | |
| /***************************************************************************** | |
| * IDirect3D7::CreateVertexBuffer | |
| * | |
| * Creates a new vertex buffer object and returns a IDirect3DVertexBuffer7 | |
| * interface. | |
| * | |
| * Version 3 and 7 | |
| * | |
| * Params: | |
| * desc: Requested Vertex buffer properties | |
| * vertex_buffer: Address to return the interface pointer at | |
| * flags: Some flags, should be 0 | |
| * | |
| * Returns | |
| * D3D_OK on success | |
| * DDERR_OUTOFMEMORY if memory allocation failed | |
| * The return value of IWineD3DDevice::CreateVertexBuffer if this call fails | |
| * DDERR_INVALIDPARAMS if desc or vertex_buffer are NULL | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI d3d7_CreateVertexBuffer(IDirect3D7 *iface, D3DVERTEXBUFFERDESC *desc, | |
| IDirect3DVertexBuffer7 **vertex_buffer, DWORD flags) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D7(iface); | |
| IDirect3DVertexBufferImpl *object; | |
| HRESULT hr; | |
| TRACE("iface %p, desc %p, vertex_buffer %p, flags %#x.\n", | |
| iface, desc, vertex_buffer, flags); | |
| if (!vertex_buffer || !desc) return DDERR_INVALIDPARAMS; | |
| TRACE("Vertex buffer description:\n"); | |
| TRACE(" dwSize %u\n", desc->dwSize); | |
| TRACE(" dwCaps %#x\n", desc->dwCaps); | |
| TRACE(" FVF %#x\n", desc->dwFVF); | |
| TRACE(" dwNumVertices %u\n", desc->dwNumVertices); | |
| /* Now create the vertex buffer */ | |
| object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*object)); | |
| if (!object) | |
| { | |
| ERR("Failed to allocate vertex buffer memory.\n"); | |
| return DDERR_OUTOFMEMORY; | |
| } | |
| hr = d3d_vertex_buffer_init(object, This, desc); | |
| if (FAILED(hr)) | |
| { | |
| WARN("Failed to initialize vertex buffer, hr %#x.\n", hr); | |
| HeapFree(GetProcessHeap(), 0, object); | |
| return hr; | |
| } | |
| TRACE("Created vertex buffer %p.\n", object); | |
| *vertex_buffer = (IDirect3DVertexBuffer7 *)object; | |
| return D3D_OK; | |
| } | |
| static HRESULT WINAPI d3d3_CreateVertexBuffer(IDirect3D3 *iface, D3DVERTEXBUFFERDESC *desc, | |
| IDirect3DVertexBuffer **vertex_buffer, DWORD flags, IUnknown *outer_unknown) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| HRESULT hr; | |
| TRACE("iface %p, desc %p, vertex_buffer %p, flags %#x, outer_unknown %p.\n", | |
| iface, desc, vertex_buffer, flags, outer_unknown); | |
| if (outer_unknown) return CLASS_E_NOAGGREGATION; | |
| hr = d3d7_CreateVertexBuffer(&This->IDirect3D7_iface, desc, | |
| (IDirect3DVertexBuffer7 **)vertex_buffer, flags); | |
| if (*vertex_buffer) | |
| *vertex_buffer = (IDirect3DVertexBuffer *)&((IDirect3DVertexBufferImpl *)*vertex_buffer)->IDirect3DVertexBuffer_vtbl; | |
| return hr; | |
| } | |
| /***************************************************************************** | |
| * IDirect3D7::EnumZBufferFormats | |
| * | |
| * Enumerates all supported Z buffer pixel formats | |
| * | |
| * Version 3 and 7 | |
| * | |
| * Params: | |
| * device_iid: | |
| * callback: callback to call for each pixel format | |
| * context: Pointer to pass back to the callback | |
| * | |
| * Returns: | |
| * D3D_OK on success | |
| * DDERR_INVALIDPARAMS if callback is NULL | |
| * For details, see IWineD3DDevice::EnumZBufferFormats | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI d3d7_EnumZBufferFormats(IDirect3D7 *iface, REFCLSID device_iid, | |
| LPD3DENUMPIXELFORMATSCALLBACK callback, void *context) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D7(iface); | |
| WINED3DDISPLAYMODE d3ddm; | |
| WINED3DDEVTYPE type; | |
| unsigned int i; | |
| HRESULT hr; | |
| /* Order matters. Specifically, BattleZone II (full version) expects the | |
| * 16-bit depth formats to be listed before the 24 and 32 ones. */ | |
| static const enum wined3d_format_id formats[] = | |
| { | |
| WINED3DFMT_S1_UINT_D15_UNORM, | |
| WINED3DFMT_D16_UNORM, | |
| WINED3DFMT_X8D24_UNORM, | |
| WINED3DFMT_S4X4_UINT_D24_UNORM, | |
| WINED3DFMT_D24_UNORM_S8_UINT, | |
| WINED3DFMT_D32_UNORM, | |
| }; | |
| TRACE("iface %p, device_iid %s, callback %p, context %p.\n", | |
| iface, debugstr_guid(device_iid), callback, context); | |
| if (!callback) return DDERR_INVALIDPARAMS; | |
| if (IsEqualGUID(device_iid, &IID_IDirect3DHALDevice) | |
| || IsEqualGUID(device_iid, &IID_IDirect3DTnLHalDevice) | |
| || IsEqualGUID(device_iid, &IID_D3DDEVICE_WineD3D)) | |
| { | |
| TRACE("Asked for HAL device.\n"); | |
| type = WINED3DDEVTYPE_HAL; | |
| } | |
| else if (IsEqualGUID(device_iid, &IID_IDirect3DRGBDevice) | |
| || IsEqualGUID(device_iid, &IID_IDirect3DMMXDevice)) | |
| { | |
| TRACE("Asked for SW device.\n"); | |
| type = WINED3DDEVTYPE_SW; | |
| } | |
| else if (IsEqualGUID(device_iid, &IID_IDirect3DRefDevice)) | |
| { | |
| TRACE("Asked for REF device.\n"); | |
| type = WINED3DDEVTYPE_REF; | |
| } | |
| else if (IsEqualGUID(device_iid, &IID_IDirect3DNullDevice)) | |
| { | |
| TRACE("Asked for NULLREF device.\n"); | |
| type = WINED3DDEVTYPE_NULLREF; | |
| } | |
| else | |
| { | |
| FIXME("Unexpected device GUID %s.\n", debugstr_guid(device_iid)); | |
| type = WINED3DDEVTYPE_HAL; | |
| } | |
| EnterCriticalSection(&ddraw_cs); | |
| /* We need an adapter format from somewhere to please wined3d and WGL. | |
| * Use the current display mode. So far all cards offer the same depth | |
| * stencil format for all modes, but if some do not and applications do | |
| * not like that we'll have to find some workaround, like iterating over | |
| * all imaginable formats and collecting all the depth stencil formats we | |
| * can get. */ | |
| hr = IWineD3DDevice_GetDisplayMode(This->wineD3DDevice, 0, &d3ddm); | |
| for (i = 0; i < (sizeof(formats) / sizeof(*formats)); ++i) | |
| { | |
| hr = wined3d_check_device_format(This->wineD3D, WINED3DADAPTER_DEFAULT, type, d3ddm.Format, | |
| WINED3DUSAGE_DEPTHSTENCIL, WINED3DRTYPE_SURFACE, formats[i], SURFACE_OPENGL); | |
| if (SUCCEEDED(hr)) | |
| { | |
| DDPIXELFORMAT pformat; | |
| memset(&pformat, 0, sizeof(pformat)); | |
| pformat.dwSize = sizeof(pformat); | |
| PixelFormat_WineD3DtoDD(&pformat, formats[i]); | |
| TRACE("Enumerating wined3d format %#x.\n", formats[i]); | |
| hr = callback(&pformat, context); | |
| if (hr != DDENUMRET_OK) | |
| { | |
| TRACE("Format enumeration cancelled by application.\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return D3D_OK; | |
| } | |
| } | |
| } | |
| TRACE("End of enumeration.\n"); | |
| LeaveCriticalSection(&ddraw_cs); | |
| return D3D_OK; | |
| } | |
| static HRESULT WINAPI d3d3_EnumZBufferFormats(IDirect3D3 *iface, REFCLSID device_iid, | |
| LPD3DENUMPIXELFORMATSCALLBACK callback, void *context) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| TRACE("iface %p, device_iid %s, callback %p, context %p.\n", | |
| iface, debugstr_guid(device_iid), callback, context); | |
| return d3d7_EnumZBufferFormats(&This->IDirect3D7_iface, device_iid, callback, context); | |
| } | |
| /***************************************************************************** | |
| * IDirect3D7::EvictManagedTextures | |
| * | |
| * Removes all managed textures (=surfaces with DDSCAPS2_TEXTUREMANAGE or | |
| * DDSCAPS2_D3DTEXTUREMANAGE caps) to be removed from video memory. | |
| * | |
| * Version 3 and 7 | |
| * | |
| * Returns: | |
| * D3D_OK, because it's a stub | |
| * | |
| *****************************************************************************/ | |
| static HRESULT WINAPI d3d7_EvictManagedTextures(IDirect3D7 *iface) | |
| { | |
| FIXME("iface %p stub!\n", iface); | |
| /* TODO: Just enumerate resources using IWineD3DDevice_EnumResources(), | |
| * then unload surfaces / textures. */ | |
| return D3D_OK; | |
| } | |
| static HRESULT WINAPI d3d3_EvictManagedTextures(IDirect3D3 *iface) | |
| { | |
| IDirectDrawImpl *This = impl_from_IDirect3D3(iface); | |
| TRACE("iface %p.\n", iface); | |
| return d3d7_EvictManagedTextures(&This->IDirect3D7_iface); | |
| } | |
| /***************************************************************************** | |
| * IDirect3DImpl_GetCaps | |
| * | |
| * This function retrieves the device caps from wined3d | |
| * and converts it into a D3D7 and D3D - D3D3 structure | |
| * This is a helper function called from various places in ddraw | |
| * | |
| * Params: | |
| * wined3d: The interface to get the caps from | |
| * desc1: Old D3D <3 structure to fill (needed) | |
| * desc7: D3D7 device desc structure to fill (needed) | |
| * | |
| * Returns | |
| * D3D_OK on success, or the return value of IWineD3D::GetCaps | |
| * | |
| *****************************************************************************/ | |
| HRESULT IDirect3DImpl_GetCaps(const struct wined3d *wined3d, D3DDEVICEDESC *desc1, D3DDEVICEDESC7 *desc7) | |
| { | |
| WINED3DCAPS wined3d_caps; | |
| HRESULT hr; | |
| TRACE("wined3d %p, desc1 %p, desc7 %p.\n", wined3d, desc1, desc7); | |
| memset(&wined3d_caps, 0, sizeof(wined3d_caps)); | |
| EnterCriticalSection(&ddraw_cs); | |
| hr = wined3d_get_device_caps(wined3d, 0, WINED3DDEVTYPE_HAL, &wined3d_caps); | |
| LeaveCriticalSection(&ddraw_cs); | |
| if (FAILED(hr)) | |
| { | |
| WARN("Failed to get device caps, hr %#x.\n", hr); | |
| return hr; | |
| } | |
| /* Copy the results into the d3d7 and d3d3 structures */ | |
| desc7->dwDevCaps = wined3d_caps.DevCaps; | |
| desc7->dpcLineCaps.dwMiscCaps = wined3d_caps.PrimitiveMiscCaps; | |
| desc7->dpcLineCaps.dwRasterCaps = wined3d_caps.RasterCaps; | |
| desc7->dpcLineCaps.dwZCmpCaps = wined3d_caps.ZCmpCaps; | |
| desc7->dpcLineCaps.dwSrcBlendCaps = wined3d_caps.SrcBlendCaps; | |
| desc7->dpcLineCaps.dwDestBlendCaps = wined3d_caps.DestBlendCaps; | |
| desc7->dpcLineCaps.dwAlphaCmpCaps = wined3d_caps.AlphaCmpCaps; | |
| desc7->dpcLineCaps.dwShadeCaps = wined3d_caps.ShadeCaps; | |
| desc7->dpcLineCaps.dwTextureCaps = wined3d_caps.TextureCaps; | |
| desc7->dpcLineCaps.dwTextureFilterCaps = wined3d_caps.TextureFilterCaps; | |
| desc7->dpcLineCaps.dwTextureAddressCaps = wined3d_caps.TextureAddressCaps; | |
| desc7->dwMaxTextureWidth = wined3d_caps.MaxTextureWidth; | |
| desc7->dwMaxTextureHeight = wined3d_caps.MaxTextureHeight; | |
| desc7->dwMaxTextureRepeat = wined3d_caps.MaxTextureRepeat; | |
| desc7->dwMaxTextureAspectRatio = wined3d_caps.MaxTextureAspectRatio; | |
| desc7->dwMaxAnisotropy = wined3d_caps.MaxAnisotropy; | |
| desc7->dvMaxVertexW = wined3d_caps.MaxVertexW; | |
| desc7->dvGuardBandLeft = wined3d_caps.GuardBandLeft; | |
| desc7->dvGuardBandTop = wined3d_caps.GuardBandTop; | |
| desc7->dvGuardBandRight = wined3d_caps.GuardBandRight; | |
| desc7->dvGuardBandBottom = wined3d_caps.GuardBandBottom; | |
| desc7->dvExtentsAdjust = wined3d_caps.ExtentsAdjust; | |
| desc7->dwStencilCaps = wined3d_caps.StencilCaps; | |
| desc7->dwFVFCaps = wined3d_caps.FVFCaps; | |
| desc7->dwTextureOpCaps = wined3d_caps.TextureOpCaps; | |
| desc7->dwVertexProcessingCaps = wined3d_caps.VertexProcessingCaps; | |
| desc7->dwMaxActiveLights = wined3d_caps.MaxActiveLights; | |
| /* Remove all non-d3d7 caps */ | |
| desc7->dwDevCaps &= ( | |
| D3DDEVCAPS_FLOATTLVERTEX | D3DDEVCAPS_SORTINCREASINGZ | D3DDEVCAPS_SORTDECREASINGZ | | |
| D3DDEVCAPS_SORTEXACT | D3DDEVCAPS_EXECUTESYSTEMMEMORY | D3DDEVCAPS_EXECUTEVIDEOMEMORY | | |
| D3DDEVCAPS_TLVERTEXSYSTEMMEMORY | D3DDEVCAPS_TLVERTEXVIDEOMEMORY | D3DDEVCAPS_TEXTURESYSTEMMEMORY | | |
| D3DDEVCAPS_TEXTUREVIDEOMEMORY | D3DDEVCAPS_DRAWPRIMTLVERTEX | D3DDEVCAPS_CANRENDERAFTERFLIP | | |
| D3DDEVCAPS_TEXTURENONLOCALVIDMEM | D3DDEVCAPS_DRAWPRIMITIVES2 | D3DDEVCAPS_SEPARATETEXTUREMEMORIES | | |
| D3DDEVCAPS_DRAWPRIMITIVES2EX | D3DDEVCAPS_HWTRANSFORMANDLIGHT | D3DDEVCAPS_CANBLTSYSTONONLOCAL | | |
| D3DDEVCAPS_HWRASTERIZATION); | |
| desc7->dwStencilCaps &= ( | |
| D3DSTENCILCAPS_KEEP | D3DSTENCILCAPS_ZERO | D3DSTENCILCAPS_REPLACE | | |
| D3DSTENCILCAPS_INCRSAT | D3DSTENCILCAPS_DECRSAT | D3DSTENCILCAPS_INVERT | | |
| D3DSTENCILCAPS_INCR | D3DSTENCILCAPS_DECR); | |
| /* FVF caps ?*/ | |
| desc7->dwTextureOpCaps &= ( | |
| D3DTEXOPCAPS_DISABLE | D3DTEXOPCAPS_SELECTARG1 | D3DTEXOPCAPS_SELECTARG2 | | |
| D3DTEXOPCAPS_MODULATE | D3DTEXOPCAPS_MODULATE2X | D3DTEXOPCAPS_MODULATE4X | | |
| D3DTEXOPCAPS_ADD | D3DTEXOPCAPS_ADDSIGNED | D3DTEXOPCAPS_ADDSIGNED2X | | |
| D3DTEXOPCAPS_SUBTRACT | D3DTEXOPCAPS_ADDSMOOTH | D3DTEXOPCAPS_BLENDTEXTUREALPHA | | |
| D3DTEXOPCAPS_BLENDFACTORALPHA | D3DTEXOPCAPS_BLENDTEXTUREALPHAPM | D3DTEXOPCAPS_BLENDCURRENTALPHA | | |
| D3DTEXOPCAPS_PREMODULATE | D3DTEXOPCAPS_MODULATEALPHA_ADDCOLOR | D3DTEXOPCAPS_MODULATECOLOR_ADDALPHA | | |
| D3DTEXOPCAPS_MODULATEINVALPHA_ADDCOLOR | D3DTEXOPCAPS_MODULATEINVCOLOR_ADDALPHA | D3DTEXOPCAPS_BUMPENVMAP | | |
| D3DTEXOPCAPS_BUMPENVMAPLUMINANCE | D3DTEXOPCAPS_DOTPRODUCT3); | |
| desc7->dwVertexProcessingCaps &= ( | |
| D3DVTXPCAPS_TEXGEN | D3DVTXPCAPS_MATERIALSOURCE7 | D3DVTXPCAPS_VERTEXFOG | | |
| D3DVTXPCAPS_DIRECTIONALLIGHTS | D3DVTXPCAPS_POSITIONALLIGHTS | D3DVTXPCAPS_LOCALVIEWER); | |
| desc7->dpcLineCaps.dwMiscCaps &= ( | |
| D3DPMISCCAPS_MASKPLANES | D3DPMISCCAPS_MASKZ | D3DPMISCCAPS_LINEPATTERNREP | | |
| D3DPMISCCAPS_CONFORMANT | D3DPMISCCAPS_CULLNONE | D3DPMISCCAPS_CULLCW | | |
| D3DPMISCCAPS_CULLCCW); | |
| desc7->dpcLineCaps.dwRasterCaps &= ( | |
| D3DPRASTERCAPS_DITHER | D3DPRASTERCAPS_ROP2 | D3DPRASTERCAPS_XOR | | |
| D3DPRASTERCAPS_PAT | D3DPRASTERCAPS_ZTEST | D3DPRASTERCAPS_SUBPIXEL | | |
| D3DPRASTERCAPS_SUBPIXELX | D3DPRASTERCAPS_FOGVERTEX | D3DPRASTERCAPS_FOGTABLE | | |
| D3DPRASTERCAPS_STIPPLE | D3DPRASTERCAPS_ANTIALIASSORTDEPENDENT | D3DPRASTERCAPS_ANTIALIASSORTINDEPENDENT | | |
| D3DPRASTERCAPS_ANTIALIASEDGES | D3DPRASTERCAPS_MIPMAPLODBIAS | D3DPRASTERCAPS_ZBIAS | | |
| D3DPRASTERCAPS_ZBUFFERLESSHSR | D3DPRASTERCAPS_FOGRANGE | D3DPRASTERCAPS_ANISOTROPY | | |
| D3DPRASTERCAPS_WBUFFER | D3DPRASTERCAPS_TRANSLUCENTSORTINDEPENDENT | D3DPRASTERCAPS_WFOG | | |
| D3DPRASTERCAPS_ZFOG); | |
| desc7->dpcLineCaps.dwZCmpCaps &= ( | |
| D3DPCMPCAPS_NEVER | D3DPCMPCAPS_LESS | D3DPCMPCAPS_EQUAL | | |
| D3DPCMPCAPS_LESSEQUAL | D3DPCMPCAPS_GREATER | D3DPCMPCAPS_NOTEQUAL | | |
| D3DPCMPCAPS_GREATEREQUAL | D3DPCMPCAPS_ALWAYS); | |
| desc7->dpcLineCaps.dwSrcBlendCaps &= ( | |
| D3DPBLENDCAPS_ZERO | D3DPBLENDCAPS_ONE | D3DPBLENDCAPS_SRCCOLOR | | |
| D3DPBLENDCAPS_INVSRCCOLOR | D3DPBLENDCAPS_SRCALPHA | D3DPBLENDCAPS_INVSRCALPHA | | |
| D3DPBLENDCAPS_DESTALPHA | D3DPBLENDCAPS_INVDESTALPHA | D3DPBLENDCAPS_DESTCOLOR | | |
| D3DPBLENDCAPS_INVDESTCOLOR | D3DPBLENDCAPS_SRCALPHASAT | D3DPBLENDCAPS_BOTHSRCALPHA | | |
| D3DPBLENDCAPS_BOTHINVSRCALPHA); | |
| desc7->dpcLineCaps.dwDestBlendCaps &= ( | |
| D3DPBLENDCAPS_ZERO | D3DPBLENDCAPS_ONE | D3DPBLENDCAPS_SRCCOLOR | | |
| D3DPBLENDCAPS_INVSRCCOLOR | D3DPBLENDCAPS_SRCALPHA | D3DPBLENDCAPS_INVSRCALPHA | | |
| D3DPBLENDCAPS_DESTALPHA | D3DPBLENDCAPS_INVDESTALPHA | D3DPBLENDCAPS_DESTCOLOR | | |
| D3DPBLENDCAPS_INVDESTCOLOR | D3DPBLENDCAPS_SRCALPHASAT | D3DPBLENDCAPS_BOTHSRCALPHA | | |
| D3DPBLENDCAPS_BOTHINVSRCALPHA); | |
| desc7->dpcLineCaps.dwAlphaCmpCaps &= ( | |
| D3DPCMPCAPS_NEVER | D3DPCMPCAPS_LESS | D3DPCMPCAPS_EQUAL | | |
| D3DPCMPCAPS_LESSEQUAL | D3DPCMPCAPS_GREATER | D3DPCMPCAPS_NOTEQUAL | | |
| D3DPCMPCAPS_GREATEREQUAL | D3DPCMPCAPS_ALWAYS); | |
| desc7->dpcLineCaps.dwShadeCaps &= ( | |
| D3DPSHADECAPS_COLORFLATMONO | D3DPSHADECAPS_COLORFLATRGB | D3DPSHADECAPS_COLORGOURAUDMONO | | |
| D3DPSHADECAPS_COLORGOURAUDRGB | D3DPSHADECAPS_COLORPHONGMONO | D3DPSHADECAPS_COLORPHONGRGB | | |
| D3DPSHADECAPS_SPECULARFLATMONO | D3DPSHADECAPS_SPECULARFLATRGB | D3DPSHADECAPS_SPECULARGOURAUDMONO | | |
| D3DPSHADECAPS_SPECULARGOURAUDRGB | D3DPSHADECAPS_SPECULARPHONGMONO | D3DPSHADECAPS_SPECULARPHONGRGB | | |
| D3DPSHADECAPS_ALPHAFLATBLEND | D3DPSHADECAPS_ALPHAFLATSTIPPLED | D3DPSHADECAPS_ALPHAGOURAUDBLEND | | |
| D3DPSHADECAPS_ALPHAGOURAUDSTIPPLED | D3DPSHADECAPS_ALPHAPHONGBLEND | D3DPSHADECAPS_ALPHAPHONGSTIPPLED | | |
| D3DPSHADECAPS_FOGFLAT | D3DPSHADECAPS_FOGGOURAUD | D3DPSHADECAPS_FOGPHONG); | |
| desc7->dpcLineCaps.dwTextureCaps &= ( | |
| D3DPTEXTURECAPS_PERSPECTIVE | D3DPTEXTURECAPS_POW2 | D3DPTEXTURECAPS_ALPHA | | |
| D3DPTEXTURECAPS_TRANSPARENCY | D3DPTEXTURECAPS_BORDER | D3DPTEXTURECAPS_SQUAREONLY | | |
| D3DPTEXTURECAPS_TEXREPEATNOTSCALEDBYSIZE | D3DPTEXTURECAPS_ALPHAPALETTE| D3DPTEXTURECAPS_NONPOW2CONDITIONAL | | |
| D3DPTEXTURECAPS_PROJECTED | D3DPTEXTURECAPS_CUBEMAP | D3DPTEXTURECAPS_COLORKEYBLEND); | |
| desc7->dpcLineCaps.dwTextureFilterCaps &= ( | |
| D3DPTFILTERCAPS_NEAREST | D3DPTFILTERCAPS_LINEAR | D3DPTFILTERCAPS_MIPNEAREST | | |
| D3DPTFILTERCAPS_MIPLINEAR | D3DPTFILTERCAPS_LINEARMIPNEAREST | D3DPTFILTERCAPS_LINEARMIPLINEAR | | |
| D3DPTFILTERCAPS_MINFPOINT | D3DPTFILTERCAPS_MINFLINEAR | D3DPTFILTERCAPS_MINFANISOTROPIC | | |
| D3DPTFILTERCAPS_MIPFPOINT | D3DPTFILTERCAPS_MIPFLINEAR | D3DPTFILTERCAPS_MAGFPOINT | | |
| D3DPTFILTERCAPS_MAGFLINEAR | D3DPTFILTERCAPS_MAGFANISOTROPIC | D3DPTFILTERCAPS_MAGFAFLATCUBIC | | |
| D3DPTFILTERCAPS_MAGFGAUSSIANCUBIC); | |
| desc7->dpcLineCaps.dwTextureBlendCaps &= ( | |
| D3DPTBLENDCAPS_DECAL | D3DPTBLENDCAPS_MODULATE | D3DPTBLENDCAPS_DECALALPHA | | |
| D3DPTBLENDCAPS_MODULATEALPHA | D3DPTBLENDCAPS_DECALMASK | D3DPTBLENDCAPS_MODULATEMASK | | |
| D3DPTBLENDCAPS_COPY | D3DPTBLENDCAPS_ADD); | |
| desc7->dpcLineCaps.dwTextureAddressCaps &= ( | |
| D3DPTADDRESSCAPS_WRAP | D3DPTADDRESSCAPS_MIRROR | D3DPTADDRESSCAPS_CLAMP | | |
| D3DPTADDRESSCAPS_BORDER | D3DPTADDRESSCAPS_INDEPENDENTUV); | |
| if (!(desc7->dpcLineCaps.dwTextureCaps & D3DPTEXTURECAPS_POW2)) | |
| { | |
| /* DirectX7 always has the np2 flag set, no matter what the card | |
| * supports. Some old games (Rollcage) check the caps incorrectly. | |
| * If wined3d supports nonpow2 textures it also has np2 conditional | |
| * support. */ | |
| desc7->dpcLineCaps.dwTextureCaps |= D3DPTEXTURECAPS_POW2 | D3DPTEXTURECAPS_NONPOW2CONDITIONAL; | |
| } | |
| /* Fill the missing members, and do some fixup */ | |
| desc7->dpcLineCaps.dwSize = sizeof(desc7->dpcLineCaps); | |
| desc7->dpcLineCaps.dwTextureBlendCaps = D3DPTBLENDCAPS_ADD | D3DPTBLENDCAPS_MODULATEMASK | | |
| D3DPTBLENDCAPS_COPY | D3DPTBLENDCAPS_DECAL | | |
| D3DPTBLENDCAPS_DECALALPHA | D3DPTBLENDCAPS_DECALMASK | | |
| D3DPTBLENDCAPS_MODULATE | D3DPTBLENDCAPS_MODULATEALPHA; | |
| desc7->dpcLineCaps.dwStippleWidth = 32; | |
| desc7->dpcLineCaps.dwStippleHeight = 32; | |
| /* Use the same for the TriCaps */ | |
| desc7->dpcTriCaps = desc7->dpcLineCaps; | |
| desc7->dwDeviceRenderBitDepth = DDBD_16 | DDBD_24 | DDBD_32; | |
| desc7->dwDeviceZBufferBitDepth = DDBD_16 | DDBD_24; | |
| desc7->dwMinTextureWidth = 1; | |
| desc7->dwMinTextureHeight = 1; | |
| /* Convert DWORDs safely to WORDs */ | |
| if (wined3d_caps.MaxTextureBlendStages > 0xffff) desc7->wMaxTextureBlendStages = 0xffff; | |
| else desc7->wMaxTextureBlendStages = (WORD)wined3d_caps.MaxTextureBlendStages; | |
| if (wined3d_caps.MaxSimultaneousTextures > 0xffff) desc7->wMaxSimultaneousTextures = 0xffff; | |
| else desc7->wMaxSimultaneousTextures = (WORD)wined3d_caps.MaxSimultaneousTextures; | |
| if (wined3d_caps.MaxUserClipPlanes > 0xffff) desc7->wMaxUserClipPlanes = 0xffff; | |
| else desc7->wMaxUserClipPlanes = (WORD)wined3d_caps.MaxUserClipPlanes; | |
| if (wined3d_caps.MaxVertexBlendMatrices > 0xffff) desc7->wMaxVertexBlendMatrices = 0xffff; | |
| else desc7->wMaxVertexBlendMatrices = (WORD)wined3d_caps.MaxVertexBlendMatrices; | |
| desc7->deviceGUID = IID_IDirect3DTnLHalDevice; | |
| desc7->dwReserved1 = 0; | |
| desc7->dwReserved2 = 0; | |
| desc7->dwReserved3 = 0; | |
| desc7->dwReserved4 = 0; | |
| /* Fill the old structure */ | |
| memset(desc1, 0, sizeof(*desc1)); | |
| desc1->dwSize = sizeof(D3DDEVICEDESC); | |
| desc1->dwFlags = D3DDD_COLORMODEL | |
| | D3DDD_DEVCAPS | |
| | D3DDD_TRANSFORMCAPS | |
| | D3DDD_BCLIPPING | |
| | D3DDD_LIGHTINGCAPS | |
| | D3DDD_LINECAPS | |
| | D3DDD_TRICAPS | |
| | D3DDD_DEVICERENDERBITDEPTH | |
| | D3DDD_DEVICEZBUFFERBITDEPTH | |
| | D3DDD_MAXBUFFERSIZE | |
| | D3DDD_MAXVERTEXCOUNT; | |
| desc1->dcmColorModel = D3DCOLOR_RGB; | |
| desc1->dwDevCaps = desc7->dwDevCaps; | |
| desc1->dtcTransformCaps.dwSize = sizeof(D3DTRANSFORMCAPS); | |
| desc1->dtcTransformCaps.dwCaps = D3DTRANSFORMCAPS_CLIP; | |
| desc1->bClipping = TRUE; | |
| desc1->dlcLightingCaps.dwSize = sizeof(D3DLIGHTINGCAPS); | |
| desc1->dlcLightingCaps.dwCaps = D3DLIGHTCAPS_DIRECTIONAL | |
| | D3DLIGHTCAPS_PARALLELPOINT | |
| | D3DLIGHTCAPS_POINT | |
| | D3DLIGHTCAPS_SPOT; | |
| desc1->dlcLightingCaps.dwLightingModel = D3DLIGHTINGMODEL_RGB; | |
| desc1->dlcLightingCaps.dwNumLights = desc7->dwMaxActiveLights; | |
| desc1->dpcLineCaps.dwSize = sizeof(D3DPRIMCAPS); | |
| desc1->dpcLineCaps.dwMiscCaps = desc7->dpcLineCaps.dwMiscCaps; | |
| desc1->dpcLineCaps.dwRasterCaps = desc7->dpcLineCaps.dwRasterCaps; | |
| desc1->dpcLineCaps.dwZCmpCaps = desc7->dpcLineCaps.dwZCmpCaps; | |
| desc1->dpcLineCaps.dwSrcBlendCaps = desc7->dpcLineCaps.dwSrcBlendCaps; | |
| desc1->dpcLineCaps.dwDestBlendCaps = desc7->dpcLineCaps.dwDestBlendCaps; | |
| desc1->dpcLineCaps.dwShadeCaps = desc7->dpcLineCaps.dwShadeCaps; | |
| desc1->dpcLineCaps.dwTextureCaps = desc7->dpcLineCaps.dwTextureCaps; | |
| desc1->dpcLineCaps.dwTextureFilterCaps = desc7->dpcLineCaps.dwTextureFilterCaps; | |
| desc1->dpcLineCaps.dwTextureBlendCaps = desc7->dpcLineCaps.dwTextureBlendCaps; | |
| desc1->dpcLineCaps.dwTextureAddressCaps = desc7->dpcLineCaps.dwTextureAddressCaps; | |
| desc1->dpcLineCaps.dwStippleWidth = desc7->dpcLineCaps.dwStippleWidth; | |
| desc1->dpcLineCaps.dwAlphaCmpCaps = desc7->dpcLineCaps.dwAlphaCmpCaps; | |
| desc1->dpcTriCaps.dwSize = sizeof(D3DPRIMCAPS); | |
| desc1->dpcTriCaps.dwMiscCaps = desc7->dpcTriCaps.dwMiscCaps; | |
| desc1->dpcTriCaps.dwRasterCaps = desc7->dpcTriCaps.dwRasterCaps; | |
| desc1->dpcTriCaps.dwZCmpCaps = desc7->dpcTriCaps.dwZCmpCaps; | |
| desc1->dpcTriCaps.dwSrcBlendCaps = desc7->dpcTriCaps.dwSrcBlendCaps; | |
| desc1->dpcTriCaps.dwDestBlendCaps = desc7->dpcTriCaps.dwDestBlendCaps; | |
| desc1->dpcTriCaps.dwShadeCaps = desc7->dpcTriCaps.dwShadeCaps; | |
| desc1->dpcTriCaps.dwTextureCaps = desc7->dpcTriCaps.dwTextureCaps; | |
| desc1->dpcTriCaps.dwTextureFilterCaps = desc7->dpcTriCaps.dwTextureFilterCaps; | |
| desc1->dpcTriCaps.dwTextureBlendCaps = desc7->dpcTriCaps.dwTextureBlendCaps; | |
| desc1->dpcTriCaps.dwTextureAddressCaps = desc7->dpcTriCaps.dwTextureAddressCaps; | |
| desc1->dpcTriCaps.dwStippleWidth = desc7->dpcTriCaps.dwStippleWidth; | |
| desc1->dpcTriCaps.dwAlphaCmpCaps = desc7->dpcTriCaps.dwAlphaCmpCaps; | |
| desc1->dwDeviceRenderBitDepth = desc7->dwDeviceRenderBitDepth; | |
| desc1->dwDeviceZBufferBitDepth = desc7->dwDeviceZBufferBitDepth; | |
| desc1->dwMaxBufferSize = 0; | |
| desc1->dwMaxVertexCount = 65536; | |
| desc1->dwMinTextureWidth = desc7->dwMinTextureWidth; | |
| desc1->dwMinTextureHeight = desc7->dwMinTextureHeight; | |
| desc1->dwMaxTextureWidth = desc7->dwMaxTextureWidth; | |
| desc1->dwMaxTextureHeight = desc7->dwMaxTextureHeight; | |
| desc1->dwMinStippleWidth = 1; | |
| desc1->dwMinStippleHeight = 1; | |
| desc1->dwMaxStippleWidth = 32; | |
| desc1->dwMaxStippleHeight = 32; | |
| desc1->dwMaxTextureRepeat = desc7->dwMaxTextureRepeat; | |
| desc1->dwMaxTextureAspectRatio = desc7->dwMaxTextureAspectRatio; | |
| desc1->dwMaxAnisotropy = desc7->dwMaxAnisotropy; | |
| desc1->dvGuardBandLeft = desc7->dvGuardBandLeft; | |
| desc1->dvGuardBandRight = desc7->dvGuardBandRight; | |
| desc1->dvGuardBandTop = desc7->dvGuardBandTop; | |
| desc1->dvGuardBandBottom = desc7->dvGuardBandBottom; | |
| desc1->dvExtentsAdjust = desc7->dvExtentsAdjust; | |
| desc1->dwStencilCaps = desc7->dwStencilCaps; | |
| desc1->dwFVFCaps = desc7->dwFVFCaps; | |
| desc1->dwTextureOpCaps = desc7->dwTextureOpCaps; | |
| desc1->wMaxTextureBlendStages = desc7->wMaxTextureBlendStages; | |
| desc1->wMaxSimultaneousTextures = desc7->wMaxSimultaneousTextures; | |
| return DD_OK; | |
| } | |
| /***************************************************************************** | |
| * IDirectDraw7 VTable | |
| *****************************************************************************/ | |
| static const struct IDirectDraw7Vtbl ddraw7_vtbl = | |
| { | |
| /* IUnknown */ | |
| ddraw7_QueryInterface, | |
| ddraw7_AddRef, | |
| ddraw7_Release, | |
| /* IDirectDraw */ | |
| ddraw7_Compact, | |
| ddraw7_CreateClipper, | |
| ddraw7_CreatePalette, | |
| ddraw7_CreateSurface, | |
| ddraw7_DuplicateSurface, | |
| ddraw7_EnumDisplayModes, | |
| ddraw7_EnumSurfaces, | |
| ddraw7_FlipToGDISurface, | |
| ddraw7_GetCaps, | |
| ddraw7_GetDisplayMode, | |
| ddraw7_GetFourCCCodes, | |
| ddraw7_GetGDISurface, | |
| ddraw7_GetMonitorFrequency, | |
| ddraw7_GetScanLine, | |
| ddraw7_GetVerticalBlankStatus, | |
| ddraw7_Initialize, | |
| ddraw7_RestoreDisplayMode, | |
| ddraw7_SetCooperativeLevel, | |
| ddraw7_SetDisplayMode, | |
| ddraw7_WaitForVerticalBlank, | |
| /* IDirectDraw2 */ | |
| ddraw7_GetAvailableVidMem, | |
| /* IDirectDraw3 */ | |
| ddraw7_GetSurfaceFromDC, | |
| /* IDirectDraw4 */ | |
| ddraw7_RestoreAllSurfaces, | |
| ddraw7_TestCooperativeLevel, | |
| ddraw7_GetDeviceIdentifier, | |
| /* IDirectDraw7 */ | |
| ddraw7_StartModeTest, | |
| ddraw7_EvaluateMode | |
| }; | |
| static const struct IDirectDraw4Vtbl ddraw4_vtbl = | |
| { | |
| /* IUnknown */ | |
| ddraw4_QueryInterface, | |
| ddraw4_AddRef, | |
| ddraw4_Release, | |
| /* IDirectDraw */ | |
| ddraw4_Compact, | |
| ddraw4_CreateClipper, | |
| ddraw4_CreatePalette, | |
| ddraw4_CreateSurface, | |
| ddraw4_DuplicateSurface, | |
| ddraw4_EnumDisplayModes, | |
| ddraw4_EnumSurfaces, | |
| ddraw4_FlipToGDISurface, | |
| ddraw4_GetCaps, | |
| ddraw4_GetDisplayMode, | |
| ddraw4_GetFourCCCodes, | |
| ddraw4_GetGDISurface, | |
| ddraw4_GetMonitorFrequency, | |
| ddraw4_GetScanLine, | |
| ddraw4_GetVerticalBlankStatus, | |
| ddraw4_Initialize, | |
| ddraw4_RestoreDisplayMode, | |
| ddraw4_SetCooperativeLevel, | |
| ddraw4_SetDisplayMode, | |
| ddraw4_WaitForVerticalBlank, | |
| /* IDirectDraw2 */ | |
| ddraw4_GetAvailableVidMem, | |
| /* IDirectDraw3 */ | |
| ddraw4_GetSurfaceFromDC, | |
| /* IDirectDraw4 */ | |
| ddraw4_RestoreAllSurfaces, | |
| ddraw4_TestCooperativeLevel, | |
| ddraw4_GetDeviceIdentifier, | |
| }; | |
| static const struct IDirectDraw3Vtbl ddraw3_vtbl = | |
| { | |
| /* IUnknown */ | |
| ddraw3_QueryInterface, | |
| ddraw3_AddRef, | |
| ddraw3_Release, | |
| /* IDirectDraw */ | |
| ddraw3_Compact, | |
| ddraw3_CreateClipper, | |
| ddraw3_CreatePalette, | |
| ddraw3_CreateSurface, | |
| ddraw3_DuplicateSurface, | |
| ddraw3_EnumDisplayModes, | |
| ddraw3_EnumSurfaces, | |
| ddraw3_FlipToGDISurface, | |
| ddraw3_GetCaps, | |
| ddraw3_GetDisplayMode, | |
| ddraw3_GetFourCCCodes, | |
| ddraw3_GetGDISurface, | |
| ddraw3_GetMonitorFrequency, | |
| ddraw3_GetScanLine, | |
| ddraw3_GetVerticalBlankStatus, | |
| ddraw3_Initialize, | |
| ddraw3_RestoreDisplayMode, | |
| ddraw3_SetCooperativeLevel, | |
| ddraw3_SetDisplayMode, | |
| ddraw3_WaitForVerticalBlank, | |
| /* IDirectDraw2 */ | |
| ddraw3_GetAvailableVidMem, | |
| /* IDirectDraw3 */ | |
| ddraw3_GetSurfaceFromDC, | |
| }; | |
| static const struct IDirectDraw2Vtbl ddraw2_vtbl = | |
| { | |
| /* IUnknown */ | |
| ddraw2_QueryInterface, | |
| ddraw2_AddRef, | |
| ddraw2_Release, | |
| /* IDirectDraw */ | |
| ddraw2_Compact, | |
| ddraw2_CreateClipper, | |
| ddraw2_CreatePalette, | |
| ddraw2_CreateSurface, | |
| ddraw2_DuplicateSurface, | |
| ddraw2_EnumDisplayModes, | |
| ddraw2_EnumSurfaces, | |
| ddraw2_FlipToGDISurface, | |
| ddraw2_GetCaps, | |
| ddraw2_GetDisplayMode, | |
| ddraw2_GetFourCCCodes, | |
| ddraw2_GetGDISurface, | |
| ddraw2_GetMonitorFrequency, | |
| ddraw2_GetScanLine, | |
| ddraw2_GetVerticalBlankStatus, | |
| ddraw2_Initialize, | |
| ddraw2_RestoreDisplayMode, | |
| ddraw2_SetCooperativeLevel, | |
| ddraw2_SetDisplayMode, | |
| ddraw2_WaitForVerticalBlank, | |
| /* IDirectDraw2 */ | |
| ddraw2_GetAvailableVidMem, | |
| }; | |
| static const struct IDirectDrawVtbl ddraw1_vtbl = | |
| { | |
| /* IUnknown */ | |
| ddraw1_QueryInterface, | |
| ddraw1_AddRef, | |
| ddraw1_Release, | |
| /* IDirectDraw */ | |
| ddraw1_Compact, | |
| ddraw1_CreateClipper, | |
| ddraw1_CreatePalette, | |
| ddraw1_CreateSurface, | |
| ddraw1_DuplicateSurface, | |
| ddraw1_EnumDisplayModes, | |
| ddraw1_EnumSurfaces, | |
| ddraw1_FlipToGDISurface, | |
| ddraw1_GetCaps, | |
| ddraw1_GetDisplayMode, | |
| ddraw1_GetFourCCCodes, | |
| ddraw1_GetGDISurface, | |
| ddraw1_GetMonitorFrequency, | |
| ddraw1_GetScanLine, | |
| ddraw1_GetVerticalBlankStatus, | |
| ddraw1_Initialize, | |
| ddraw1_RestoreDisplayMode, | |
| ddraw1_SetCooperativeLevel, | |
| ddraw1_SetDisplayMode, | |
| ddraw1_WaitForVerticalBlank, | |
| }; | |
| static const struct IDirect3D7Vtbl d3d7_vtbl = | |
| { | |
| /* IUnknown methods */ | |
| d3d7_QueryInterface, | |
| d3d7_AddRef, | |
| d3d7_Release, | |
| /* IDirect3D7 methods */ | |
| d3d7_EnumDevices, | |
| d3d7_CreateDevice, | |
| d3d7_CreateVertexBuffer, | |
| d3d7_EnumZBufferFormats, | |
| d3d7_EvictManagedTextures | |
| }; | |
| static const struct IDirect3D3Vtbl d3d3_vtbl = | |
| { | |
| /* IUnknown methods */ | |
| d3d3_QueryInterface, | |
| d3d3_AddRef, | |
| d3d3_Release, | |
| /* IDirect3D3 methods */ | |
| d3d3_EnumDevices, | |
| d3d3_CreateLight, | |
| d3d3_CreateMaterial, | |
| d3d3_CreateViewport, | |
| d3d3_FindDevice, | |
| d3d3_CreateDevice, | |
| d3d3_CreateVertexBuffer, | |
| d3d3_EnumZBufferFormats, | |
| d3d3_EvictManagedTextures | |
| }; | |
| static const struct IDirect3D2Vtbl d3d2_vtbl = | |
| { | |
| /* IUnknown methods */ | |
| d3d2_QueryInterface, | |
| d3d2_AddRef, | |
| d3d2_Release, | |
| /* IDirect3D2 methods */ | |
| d3d2_EnumDevices, | |
| d3d2_CreateLight, | |
| d3d2_CreateMaterial, | |
| d3d2_CreateViewport, | |
| d3d2_FindDevice, | |
| d3d2_CreateDevice | |
| }; | |
| static const struct IDirect3DVtbl d3d1_vtbl = | |
| { | |
| /* IUnknown methods */ | |
| d3d1_QueryInterface, | |
| d3d1_AddRef, | |
| d3d1_Release, | |
| /* IDirect3D methods */ | |
| d3d1_Initialize, | |
| d3d1_EnumDevices, | |
| d3d1_CreateLight, | |
| d3d1_CreateMaterial, | |
| d3d1_CreateViewport, | |
| d3d1_FindDevice | |
| }; | |
| /***************************************************************************** | |
| * ddraw_find_decl | |
| * | |
| * Finds the WineD3D vertex declaration for a specific fvf, and creates one | |
| * if none was found. | |
| * | |
| * This function is in ddraw.c and the DDraw object space because D3D7 | |
| * vertex buffers are created using the IDirect3D interface to the ddraw | |
| * object, so they can be valid across D3D devices(theoretically. The ddraw | |
| * object also owns the wined3d device | |
| * | |
| * Parameters: | |
| * This: Device | |
| * fvf: Fvf to find the decl for | |
| * | |
| * Returns: | |
| * NULL in case of an error, the vertex declaration for the FVF otherwise. | |
| * | |
| *****************************************************************************/ | |
| struct wined3d_vertex_declaration *ddraw_find_decl(IDirectDrawImpl *This, DWORD fvf) | |
| { | |
| struct wined3d_vertex_declaration *pDecl = NULL; | |
| HRESULT hr; | |
| int p, low, high; /* deliberately signed */ | |
| struct FvfToDecl *convertedDecls = This->decls; | |
| TRACE("Searching for declaration for fvf %08x... ", fvf); | |
| low = 0; | |
| high = This->numConvertedDecls - 1; | |
| while(low <= high) { | |
| p = (low + high) >> 1; | |
| TRACE("%d ", p); | |
| if(convertedDecls[p].fvf == fvf) { | |
| TRACE("found %p\n", convertedDecls[p].decl); | |
| return convertedDecls[p].decl; | |
| } else if(convertedDecls[p].fvf < fvf) { | |
| low = p + 1; | |
| } else { | |
| high = p - 1; | |
| } | |
| } | |
| TRACE("not found. Creating and inserting at position %d.\n", low); | |
| hr = IWineD3DDevice_CreateVertexDeclarationFromFVF(This->wineD3DDevice, | |
| fvf, This, &ddraw_null_wined3d_parent_ops, &pDecl); | |
| if (hr != S_OK) return NULL; | |
| if(This->declArraySize == This->numConvertedDecls) { | |
| int grow = max(This->declArraySize / 2, 8); | |
| convertedDecls = HeapReAlloc(GetProcessHeap(), 0, convertedDecls, | |
| sizeof(convertedDecls[0]) * (This->numConvertedDecls + grow)); | |
| if (!convertedDecls) | |
| { | |
| wined3d_vertex_declaration_decref(pDecl); | |
| return NULL; | |
| } | |
| This->decls = convertedDecls; | |
| This->declArraySize += grow; | |
| } | |
| memmove(convertedDecls + low + 1, convertedDecls + low, sizeof(convertedDecls[0]) * (This->numConvertedDecls - low)); | |
| convertedDecls[low].decl = pDecl; | |
| convertedDecls[low].fvf = fvf; | |
| This->numConvertedDecls++; | |
| TRACE("Returning %p. %d decls in array\n", pDecl, This->numConvertedDecls); | |
| return pDecl; | |
| } | |
| /* IWineD3DDeviceParent IUnknown methods */ | |
| static inline struct IDirectDrawImpl *ddraw_from_device_parent(IWineD3DDeviceParent *iface) | |
| { | |
| return (struct IDirectDrawImpl *)((char*)iface - FIELD_OFFSET(struct IDirectDrawImpl, device_parent_vtbl)); | |
| } | |
| static HRESULT STDMETHODCALLTYPE device_parent_QueryInterface(IWineD3DDeviceParent *iface, REFIID riid, void **object) | |
| { | |
| struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); | |
| return ddraw7_QueryInterface(&This->IDirectDraw7_iface, riid, object); | |
| } | |
| static ULONG STDMETHODCALLTYPE device_parent_AddRef(IWineD3DDeviceParent *iface) | |
| { | |
| struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); | |
| return ddraw7_AddRef(&This->IDirectDraw7_iface); | |
| } | |
| static ULONG STDMETHODCALLTYPE device_parent_Release(IWineD3DDeviceParent *iface) | |
| { | |
| struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); | |
| return ddraw7_Release(&This->IDirectDraw7_iface); | |
| } | |
| /* IWineD3DDeviceParent methods */ | |
| static void STDMETHODCALLTYPE device_parent_WineD3DDeviceCreated(IWineD3DDeviceParent *iface, IWineD3DDevice *device) | |
| { | |
| TRACE("iface %p, device %p\n", iface, device); | |
| } | |
| static HRESULT STDMETHODCALLTYPE device_parent_CreateSurface(IWineD3DDeviceParent *iface, | |
| void *container_parent, UINT width, UINT height, enum wined3d_format_id format, DWORD usage, | |
| WINED3DPOOL pool, UINT level, WINED3DCUBEMAP_FACES face, struct wined3d_surface **surface) | |
| { | |
| struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); | |
| IDirectDrawSurfaceImpl *surf = NULL; | |
| UINT i = 0; | |
| DDSCAPS2 searchcaps = This->tex_root->surface_desc.ddsCaps; | |
| TRACE("iface %p, container_parent %p, width %u, height %u, format %#x, usage %#x,\n" | |
| "\tpool %#x, level %u, face %u, surface %p\n", | |
| iface, container_parent, width, height, format, usage, pool, level, face, surface); | |
| searchcaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_ALLFACES; | |
| switch(face) | |
| { | |
| case WINED3DCUBEMAP_FACE_POSITIVE_X: | |
| TRACE("Asked for positive x\n"); | |
| if (searchcaps.dwCaps2 & DDSCAPS2_CUBEMAP) | |
| { | |
| searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEX; | |
| } | |
| surf = This->tex_root; break; | |
| case WINED3DCUBEMAP_FACE_NEGATIVE_X: | |
| TRACE("Asked for negative x\n"); | |
| searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEX; break; | |
| case WINED3DCUBEMAP_FACE_POSITIVE_Y: | |
| TRACE("Asked for positive y\n"); | |
| searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEY; break; | |
| case WINED3DCUBEMAP_FACE_NEGATIVE_Y: | |
| TRACE("Asked for negative y\n"); | |
| searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEY; break; | |
| case WINED3DCUBEMAP_FACE_POSITIVE_Z: | |
| TRACE("Asked for positive z\n"); | |
| searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEZ; break; | |
| case WINED3DCUBEMAP_FACE_NEGATIVE_Z: | |
| TRACE("Asked for negative z\n"); | |
| searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEZ; break; | |
| default: {ERR("Unexpected cube face\n");} /* Stupid compiler */ | |
| } | |
| if (!surf) | |
| { | |
| IDirectDrawSurface7 *attached; | |
| IDirectDrawSurface7_GetAttachedSurface((IDirectDrawSurface7 *)This->tex_root, &searchcaps, &attached); | |
| surf = (IDirectDrawSurfaceImpl *)attached; | |
| IDirectDrawSurface7_Release(attached); | |
| } | |
| if (!surf) ERR("root search surface not found\n"); | |
| /* Find the wanted mipmap. There are enough mipmaps in the chain */ | |
| while (i < level) | |
| { | |
| IDirectDrawSurface7 *attached; | |
| IDirectDrawSurface7_GetAttachedSurface((IDirectDrawSurface7 *)surf, &searchcaps, &attached); | |
| if(!attached) ERR("Surface not found\n"); | |
| surf = (IDirectDrawSurfaceImpl *)attached; | |
| IDirectDrawSurface7_Release(attached); | |
| ++i; | |
| } | |
| /* Return the surface */ | |
| *surface = surf->wined3d_surface; | |
| wined3d_surface_incref(*surface); | |
| TRACE("Returning wineD3DSurface %p, it belongs to surface %p\n", *surface, surf); | |
| return D3D_OK; | |
| } | |
| static HRESULT WINAPI findRenderTarget(IDirectDrawSurface7 *surface, DDSURFACEDESC2 *surface_desc, void *ctx) | |
| { | |
| IDirectDrawSurfaceImpl *s = (IDirectDrawSurfaceImpl *)surface; | |
| IDirectDrawSurfaceImpl **target = ctx; | |
| if (!s->isRenderTarget) | |
| { | |
| *target = s; | |
| IDirectDrawSurface7_Release(surface); | |
| return DDENUMRET_CANCEL; | |
| } | |
| /* Recurse into the surface tree */ | |
| IDirectDrawSurface7_EnumAttachedSurfaces(surface, ctx, findRenderTarget); | |
| IDirectDrawSurface7_Release(surface); | |
| if (*target) return DDENUMRET_CANCEL; | |
| return DDENUMRET_OK; | |
| } | |
| static HRESULT STDMETHODCALLTYPE device_parent_CreateRenderTarget(IWineD3DDeviceParent *iface, | |
| void *container_parent, UINT width, UINT height, enum wined3d_format_id format, | |
| WINED3DMULTISAMPLE_TYPE multisample_type, DWORD multisample_quality, BOOL lockable, | |
| struct wined3d_surface **surface) | |
| { | |
| struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); | |
| IDirectDrawSurfaceImpl *d3d_surface = This->d3d_target; | |
| IDirectDrawSurfaceImpl *target = NULL; | |
| TRACE("iface %p, container_parent %p, width %u, height %u, format %#x, multisample_type %#x,\n" | |
| "\tmultisample_quality %u, lockable %u, surface %p\n", | |
| iface, container_parent, width, height, format, multisample_type, multisample_quality, lockable, surface); | |
| if (d3d_surface->isRenderTarget) | |
| { | |
| IDirectDrawSurface7_EnumAttachedSurfaces((IDirectDrawSurface7 *)d3d_surface, &target, findRenderTarget); | |
| } | |
| else | |
| { | |
| target = d3d_surface; | |
| } | |
| if (!target) | |
| { | |
| target = This->d3d_target; | |
| ERR(" (%p) : No DirectDrawSurface found to create the back buffer. Using the front buffer as back buffer. Uncertain consequences\n", This); | |
| } | |
| /* TODO: Return failure if the dimensions do not match, but this shouldn't happen */ | |
| *surface = target->wined3d_surface; | |
| wined3d_surface_incref(*surface); | |
| target->isRenderTarget = TRUE; | |
| TRACE("Returning wineD3DSurface %p, it belongs to surface %p\n", *surface, d3d_surface); | |
| return D3D_OK; | |
| } | |
| static HRESULT STDMETHODCALLTYPE device_parent_CreateDepthStencilSurface(IWineD3DDeviceParent *iface, | |
| UINT width, UINT height, enum wined3d_format_id format, WINED3DMULTISAMPLE_TYPE multisample_type, | |
| DWORD multisample_quality, BOOL discard, struct wined3d_surface **surface) | |
| { | |
| struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); | |
| IDirectDrawSurfaceImpl *ddraw_surface; | |
| DDSURFACEDESC2 ddsd; | |
| HRESULT hr; | |
| TRACE("iface %p, width %u, height %u, format %#x, multisample_type %#x,\n" | |
| "\tmultisample_quality %u, discard %u, surface %p\n", | |
| iface, width, height, format, multisample_type, multisample_quality, discard, surface); | |
| *surface = NULL; | |
| /* Create a DirectDraw surface */ | |
| memset(&ddsd, 0, sizeof(ddsd)); | |
| ddsd.dwSize = sizeof(ddsd); | |
| ddsd.u4.ddpfPixelFormat.dwSize = sizeof(DDPIXELFORMAT); | |
| ddsd.dwFlags = DDSD_PIXELFORMAT | DDSD_WIDTH | DDSD_HEIGHT | DDSD_CAPS; | |
| ddsd.ddsCaps.dwCaps = DDSCAPS_OFFSCREENPLAIN; | |
| ddsd.dwHeight = height; | |
| ddsd.dwWidth = width; | |
| if (format) | |
| { | |
| PixelFormat_WineD3DtoDD(&ddsd.u4.ddpfPixelFormat, format); | |
| } | |
| else | |
| { | |
| ddsd.dwFlags ^= DDSD_PIXELFORMAT; | |
| } | |
| This->depthstencil = TRUE; | |
| hr = IDirectDraw7_CreateSurface(&This->IDirectDraw7_iface, &ddsd, | |
| (IDirectDrawSurface7 **)&ddraw_surface, NULL); | |
| This->depthstencil = FALSE; | |
| if(FAILED(hr)) | |
| { | |
| ERR(" (%p) Creating a DepthStencil Surface failed, result = %x\n", This, hr); | |
| return hr; | |
| } | |
| *surface = ddraw_surface->wined3d_surface; | |
| wined3d_surface_incref(*surface); | |
| IDirectDrawSurface7_Release((IDirectDrawSurface7 *)ddraw_surface); | |
| return D3D_OK; | |
| } | |
| static HRESULT STDMETHODCALLTYPE device_parent_CreateVolume(IWineD3DDeviceParent *iface, | |
| void *container_parent, UINT width, UINT height, UINT depth, enum wined3d_format_id format, | |
| WINED3DPOOL pool, DWORD usage, struct wined3d_volume **volume) | |
| { | |
| TRACE("iface %p, container_parent %p, width %u, height %u, depth %u, format %#x, pool %#x, usage %#x, volume %p\n", | |
| iface, container_parent, width, height, depth, format, pool, usage, volume); | |
| ERR("Not implemented!\n"); | |
| return E_NOTIMPL; | |
| } | |
| static HRESULT STDMETHODCALLTYPE device_parent_CreateSwapChain(IWineD3DDeviceParent *iface, | |
| WINED3DPRESENT_PARAMETERS *present_parameters, struct wined3d_swapchain **swapchain) | |
| { | |
| struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); | |
| IDirectDrawSurfaceImpl *iterator; | |
| HRESULT hr; | |
| TRACE("iface %p, present_parameters %p, swapchain %p\n", iface, present_parameters, swapchain); | |
| hr = IWineD3DDevice_CreateSwapChain(This->wineD3DDevice, present_parameters, | |
| This->ImplType, NULL, &ddraw_null_wined3d_parent_ops, swapchain); | |
| if (FAILED(hr)) | |
| { | |
| FIXME("(%p) CreateSwapChain failed, returning %#x\n", iface, hr); | |
| *swapchain = NULL; | |
| return hr; | |
| } | |
| This->d3d_target->wined3d_swapchain = *swapchain; | |
| iterator = This->d3d_target->complex_array[0]; | |
| while (iterator) | |
| { | |
| iterator->wined3d_swapchain = *swapchain; | |
| iterator = iterator->complex_array[0]; | |
| } | |
| return hr; | |
| } | |
| static const IWineD3DDeviceParentVtbl ddraw_wined3d_device_parent_vtbl = | |
| { | |
| /* IUnknown methods */ | |
| device_parent_QueryInterface, | |
| device_parent_AddRef, | |
| device_parent_Release, | |
| /* IWineD3DDeviceParent methods */ | |
| device_parent_WineD3DDeviceCreated, | |
| device_parent_CreateSurface, | |
| device_parent_CreateRenderTarget, | |
| device_parent_CreateDepthStencilSurface, | |
| device_parent_CreateVolume, | |
| device_parent_CreateSwapChain, | |
| }; | |
| HRESULT ddraw_init(IDirectDrawImpl *ddraw, WINED3DDEVTYPE device_type) | |
| { | |
| HRESULT hr; | |
| HDC hDC; | |
| ddraw->IDirectDraw7_iface.lpVtbl = &ddraw7_vtbl; | |
| ddraw->IDirectDraw_iface.lpVtbl = &ddraw1_vtbl; | |
| ddraw->IDirectDraw2_iface.lpVtbl = &ddraw2_vtbl; | |
| ddraw->IDirectDraw3_iface.lpVtbl = &ddraw3_vtbl; | |
| ddraw->IDirectDraw4_iface.lpVtbl = &ddraw4_vtbl; | |
| ddraw->IDirect3D_iface.lpVtbl = &d3d1_vtbl; | |
| ddraw->IDirect3D2_iface.lpVtbl = &d3d2_vtbl; | |
| ddraw->IDirect3D3_iface.lpVtbl = &d3d3_vtbl; | |
| ddraw->IDirect3D7_iface.lpVtbl = &d3d7_vtbl; | |
| ddraw->device_parent_vtbl = &ddraw_wined3d_device_parent_vtbl; | |
| ddraw->numIfaces = 1; | |
| ddraw->ref7 = 1; | |
| /* See comments in IDirectDrawImpl_CreateNewSurface for a description of | |
| * this field. */ | |
| ddraw->ImplType = DefaultSurfaceType; | |
| /* Get the current screen settings. */ | |
| hDC = GetDC(0); | |
| ddraw->orig_bpp = GetDeviceCaps(hDC, BITSPIXEL) * GetDeviceCaps(hDC, PLANES); | |
| ReleaseDC(0, hDC); | |
| ddraw->orig_width = GetSystemMetrics(SM_CXSCREEN); | |
| ddraw->orig_height = GetSystemMetrics(SM_CYSCREEN); | |
| ddraw->wineD3D = wined3d_create(7, &ddraw->IDirectDraw7_iface); | |
| if (!ddraw->wineD3D) | |
| { | |
| WARN("Failed to create a wined3d object.\n"); | |
| return E_OUTOFMEMORY; | |
| } | |
| hr = wined3d_device_create(ddraw->wineD3D, WINED3DADAPTER_DEFAULT, device_type, NULL, 0, | |
| (IWineD3DDeviceParent *)&ddraw->device_parent_vtbl, &ddraw->wineD3DDevice); | |
| if (FAILED(hr)) | |
| { | |
| WARN("Failed to create a wined3d device, hr %#x.\n", hr); | |
| wined3d_decref(ddraw->wineD3D); | |
| return hr; | |
| } | |
| /* Get the amount of video memory */ | |
| ddraw->total_vidmem = IWineD3DDevice_GetAvailableTextureMem(ddraw->wineD3DDevice); | |
| list_init(&ddraw->surface_list); | |
| return DD_OK; | |
| } |