| /* |
| * Copyright 1994 Eric Youndale & Erik Bos |
| * Copyright 1995 Martin von Löwis |
| * Copyright 1996-98 Marcus Meissner |
| * |
| * based on Eric Youndale's pe-test and: |
| * |
| * ftp.microsoft.com:/pub/developer/MSDN/CD8/PEFILE.ZIP |
| * make that: |
| * ftp.microsoft.com:/developr/MSDN/OctCD/PEFILE.ZIP |
| */ |
| /* Notes: |
| * Before you start changing something in this file be aware of the following: |
| * |
| * - There are several functions called recursively. In a very subtle and |
| * obscure way. DLLs can reference each other recursively etc. |
| * - If you want to enhance, speed up or clean up something in here, think |
| * twice WHY it is implemented in that strange way. There is usually a reason. |
| * Though sometimes it might just be lazyness ;) |
| * - In PE_MapImage, right before fixup_imports() all external and internal |
| * state MUST be correct since this function can be called with the SAME image |
| * AGAIN. (Thats recursion for you.) That means MODREF.module and |
| * NE_MODULE.module32. |
| * - No, you (usually) cannot use Linux mmap() to mmap() the images directly. |
| * |
| * The problem is, that there is not direct 1:1 mapping from a diskimage and |
| * a memoryimage. The headers at the start are mapped linear, but the sections |
| * are not. For x86 the sections are 512 byte aligned in file and 4096 byte |
| * aligned in memory. Linux likes them 4096 byte aligned in memory (due to |
| * x86 pagesize, this cannot be fixed without a rather large kernel rewrite) |
| * and 'blocksize' file-aligned (offsets). Since we have 512/1024/2048 (CDROM) |
| * and other byte blocksizes, we can't do this. However, this could be less |
| * difficult to support... (See mm/filemap.c). |
| */ |
| |
| #include <errno.h> |
| #include <assert.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <sys/mman.h> |
| #include "windef.h" |
| #include "winbase.h" |
| #include "winerror.h" |
| #include "callback.h" |
| #include "file.h" |
| #include "heap.h" |
| #include "neexe.h" |
| #include "peexe.h" |
| #include "process.h" |
| #include "thread.h" |
| #include "pe_image.h" |
| #include "module.h" |
| #include "global.h" |
| #include "task.h" |
| #include "snoop.h" |
| #include "debugtools.h" |
| |
| DECLARE_DEBUG_CHANNEL(delayhlp) |
| DECLARE_DEBUG_CHANNEL(fixup) |
| DECLARE_DEBUG_CHANNEL(module) |
| DECLARE_DEBUG_CHANNEL(relay) |
| DECLARE_DEBUG_CHANNEL(segment) |
| DECLARE_DEBUG_CHANNEL(win32) |
| |
| |
| /* convert PE image VirtualAddress to Real Address */ |
| #define RVA(x) ((unsigned int)load_addr+(unsigned int)(x)) |
| |
| #define AdjustPtr(ptr,delta) ((char *)(ptr) + (delta)) |
| |
| void dump_exports( HMODULE hModule ) |
| { |
| char *Module; |
| int i, j; |
| u_short *ordinal; |
| u_long *function,*functions; |
| u_char **name; |
| unsigned int load_addr = hModule; |
| |
| DWORD rva_start = PE_HEADER(hModule)->OptionalHeader |
| .DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].VirtualAddress; |
| DWORD rva_end = rva_start + PE_HEADER(hModule)->OptionalHeader |
| .DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].Size; |
| IMAGE_EXPORT_DIRECTORY *pe_exports = (IMAGE_EXPORT_DIRECTORY*)RVA(rva_start); |
| |
| Module = (char*)RVA(pe_exports->Name); |
| TRACE_(win32)("*******EXPORT DATA*******\n"); |
| TRACE_(win32)("Module name is %s, %ld functions, %ld names\n", |
| Module, pe_exports->NumberOfFunctions, pe_exports->NumberOfNames); |
| |
| ordinal=(u_short*) RVA(pe_exports->AddressOfNameOrdinals); |
| functions=function=(u_long*) RVA(pe_exports->AddressOfFunctions); |
| name=(u_char**) RVA(pe_exports->AddressOfNames); |
| |
| TRACE_(win32)(" Ord RVA Addr Name\n" ); |
| for (i=0;i<pe_exports->NumberOfFunctions;i++, function++) |
| { |
| if (!*function) continue; /* No such function */ |
| if (TRACE_ON(win32)){ |
| dbg_decl_str(win32, 1024); |
| |
| dsprintf(win32,"%4ld %08lx %08x", |
| i + pe_exports->Base, *function, RVA(*function) ); |
| /* Check if we have a name for it */ |
| for (j = 0; j < pe_exports->NumberOfNames; j++) |
| if (ordinal[j] == i) |
| dsprintf(win32, " %s", (char*)RVA(name[j]) ); |
| if ((*function >= rva_start) && (*function <= rva_end)) |
| dsprintf(win32, " (forwarded -> %s)", (char *)RVA(*function)); |
| TRACE_(win32)("%s\n", dbg_str(win32)); |
| } |
| } |
| } |
| |
| /* Look up the specified function or ordinal in the exportlist: |
| * If it is a string: |
| * - look up the name in the Name list. |
| * - look up the ordinal with that index. |
| * - use the ordinal as offset into the functionlist |
| * If it is a ordinal: |
| * - use ordinal-pe_export->Base as offset into the functionlist |
| */ |
| FARPROC PE_FindExportedFunction( |
| WINE_MODREF *wm, /* [in] WINE modreference */ |
| LPCSTR funcName, /* [in] function name */ |
| BOOL snoop ) |
| { |
| u_short * ordinal; |
| u_long * function; |
| u_char ** name, *ename; |
| int i; |
| PE_MODREF *pem = &(wm->binfmt.pe); |
| IMAGE_EXPORT_DIRECTORY *exports = pem->pe_export; |
| unsigned int load_addr = wm->module; |
| u_long rva_start, rva_end, addr; |
| char * forward; |
| |
| if (HIWORD(funcName)) |
| TRACE_(win32)("(%s)\n",funcName); |
| else |
| TRACE_(win32)("(%d)\n",(int)funcName); |
| if (!exports) { |
| /* Not a fatal problem, some apps do |
| * GetProcAddress(0,"RegisterPenApp") which triggers this |
| * case. |
| */ |
| WARN_(win32)("Module %08x(%s)/MODREF %p doesn't have a exports table.\n",wm->module,wm->modname,pem); |
| return NULL; |
| } |
| ordinal = (u_short*) RVA(exports->AddressOfNameOrdinals); |
| function= (u_long*) RVA(exports->AddressOfFunctions); |
| name = (u_char **) RVA(exports->AddressOfNames); |
| forward = NULL; |
| rva_start = PE_HEADER(wm->module)->OptionalHeader |
| .DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].VirtualAddress; |
| rva_end = rva_start + PE_HEADER(wm->module)->OptionalHeader |
| .DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].Size; |
| |
| if (HIWORD(funcName)) { |
| for(i=0; i<exports->NumberOfNames; i++) { |
| ename=(char*)RVA(*name); |
| if(!strcmp(ename,funcName)) |
| { |
| addr = function[*ordinal]; |
| if (!addr) return NULL; |
| if ((addr < rva_start) || (addr >= rva_end)) |
| return snoop? SNOOP_GetProcAddress(wm->module,ename,*ordinal,(FARPROC)RVA(addr)) |
| : (FARPROC)RVA(addr); |
| forward = (char *)RVA(addr); |
| break; |
| } |
| ordinal++; |
| name++; |
| } |
| } else { |
| int i; |
| if (LOWORD(funcName)-exports->Base > exports->NumberOfFunctions) { |
| TRACE_(win32)(" ordinal %d out of range!\n", |
| LOWORD(funcName)); |
| return NULL; |
| } |
| addr = function[(int)funcName-exports->Base]; |
| if (!addr) return NULL; |
| ename = ""; |
| if (name) { |
| for (i=0;i<exports->NumberOfNames;i++) { |
| ename = (char*)RVA(*name); |
| if (*ordinal == LOWORD(funcName)-exports->Base) |
| break; |
| ordinal++; |
| name++; |
| } |
| if (i==exports->NumberOfNames) |
| ename = ""; |
| } |
| if ((addr < rva_start) || (addr >= rva_end)) |
| return snoop? SNOOP_GetProcAddress(wm->module,ename,(DWORD)funcName-exports->Base,(FARPROC)RVA(addr)) |
| : (FARPROC)RVA(addr); |
| forward = (char *)RVA(addr); |
| } |
| if (forward) |
| { |
| WINE_MODREF *wm; |
| char module[256]; |
| char *end = strchr(forward, '.'); |
| |
| if (!end) return NULL; |
| assert(end-forward<256); |
| strncpy(module, forward, (end - forward)); |
| module[end-forward] = 0; |
| if (!(wm = MODULE_FindModule( module ))) |
| { |
| ERR_(win32)("module not found for forward '%s'\n", forward ); |
| return NULL; |
| } |
| return MODULE_GetProcAddress( wm->module, end + 1, snoop ); |
| } |
| return NULL; |
| } |
| |
| DWORD fixup_imports( WINE_MODREF *wm ) |
| { |
| IMAGE_IMPORT_DESCRIPTOR *pe_imp; |
| PE_MODREF *pem; |
| unsigned int load_addr = wm->module; |
| int i,characteristics_detection=1; |
| char *modname; |
| |
| assert(wm->type==MODULE32_PE); |
| pem = &(wm->binfmt.pe); |
| if (pem->pe_export) |
| modname = (char*) RVA(pem->pe_export->Name); |
| else |
| modname = "<unknown>"; |
| |
| /* OK, now dump the import list */ |
| TRACE_(win32)("Dumping imports list\n"); |
| |
| /* first, count the number of imported non-internal modules */ |
| pe_imp = pem->pe_import; |
| if (!pe_imp) return 0; |
| |
| /* We assume that we have at least one import with !0 characteristics and |
| * detect broken imports with all characteristsics 0 (notably Borland) and |
| * switch the detection off for them. |
| */ |
| for (i = 0; pe_imp->Name ; pe_imp++) { |
| if (!i && !pe_imp->u.Characteristics) |
| characteristics_detection = 0; |
| if (characteristics_detection && !pe_imp->u.Characteristics) |
| break; |
| i++; |
| } |
| if (!i) return 0; /* no imports */ |
| |
| /* Allocate module dependency list */ |
| wm->nDeps = i; |
| wm->deps = HeapAlloc( GetProcessHeap(), 0, i*sizeof(WINE_MODREF *) ); |
| |
| /* load the imported modules. They are automatically |
| * added to the modref list of the process. |
| */ |
| |
| for (i = 0, pe_imp = pem->pe_import; pe_imp->Name ; pe_imp++) { |
| WINE_MODREF *wmImp; |
| IMAGE_IMPORT_BY_NAME *pe_name; |
| PIMAGE_THUNK_DATA import_list,thunk_list; |
| char *name = (char *) RVA(pe_imp->Name); |
| |
| if (characteristics_detection && !pe_imp->u.Characteristics) |
| break; |
| |
| /* don't use MODULE_Load, Win32 creates new task differently */ |
| wmImp = MODULE_LoadLibraryExA( name, 0, 0 ); |
| if (!wmImp) { |
| char *p,buffer[2000]; |
| |
| /* GetModuleFileName would use the wrong process, so don't use it */ |
| strcpy(buffer,wm->shortname); |
| if (!(p = strrchr (buffer, '\\'))) |
| p = buffer; |
| strcpy (p + 1, name); |
| wmImp = MODULE_LoadLibraryExA( buffer, 0, 0 ); |
| } |
| if (!wmImp) { |
| ERR_(module)("Module %s not found\n", name); |
| return 1; |
| } |
| wm->deps[i++] = wmImp; |
| |
| /* FIXME: forwarder entries ... */ |
| |
| if (pe_imp->u.OriginalFirstThunk != 0) { /* original MS style */ |
| TRACE_(win32)("Microsoft style imports used\n"); |
| import_list =(PIMAGE_THUNK_DATA) RVA(pe_imp->u.OriginalFirstThunk); |
| thunk_list = (PIMAGE_THUNK_DATA) RVA(pe_imp->FirstThunk); |
| |
| while (import_list->u1.Ordinal) { |
| if (IMAGE_SNAP_BY_ORDINAL(import_list->u1.Ordinal)) { |
| int ordinal = IMAGE_ORDINAL(import_list->u1.Ordinal); |
| |
| TRACE_(win32)("--- Ordinal %s,%d\n", name, ordinal); |
| thunk_list->u1.Function=MODULE_GetProcAddress( |
| wmImp->module, (LPCSTR)ordinal, TRUE |
| ); |
| if (!thunk_list->u1.Function) { |
| ERR_(win32)("No implementation for %s.%d, setting to 0xdeadbeef\n", |
| name, ordinal); |
| thunk_list->u1.Function = (FARPROC)0xdeadbeef; |
| } |
| } else { /* import by name */ |
| pe_name = (PIMAGE_IMPORT_BY_NAME)RVA(import_list->u1.AddressOfData); |
| TRACE_(win32)("--- %s %s.%d\n", pe_name->Name, name, pe_name->Hint); |
| thunk_list->u1.Function=MODULE_GetProcAddress( |
| wmImp->module, pe_name->Name, TRUE |
| ); |
| if (!thunk_list->u1.Function) { |
| ERR_(win32)("No implementation for %s.%d(%s), setting to 0xdeadbeef\n", |
| name,pe_name->Hint,pe_name->Name); |
| thunk_list->u1.Function = (FARPROC)0xdeadbeef; |
| } |
| } |
| import_list++; |
| thunk_list++; |
| } |
| } else { /* Borland style */ |
| TRACE_(win32)("Borland style imports used\n"); |
| thunk_list = (PIMAGE_THUNK_DATA) RVA(pe_imp->FirstThunk); |
| while (thunk_list->u1.Ordinal) { |
| if (IMAGE_SNAP_BY_ORDINAL(thunk_list->u1.Ordinal)) { |
| /* not sure about this branch, but it seems to work */ |
| int ordinal = IMAGE_ORDINAL(thunk_list->u1.Ordinal); |
| |
| TRACE_(win32)("--- Ordinal %s.%d\n",name,ordinal); |
| thunk_list->u1.Function=MODULE_GetProcAddress( |
| wmImp->module, (LPCSTR) ordinal, TRUE |
| ); |
| if (!thunk_list->u1.Function) { |
| ERR_(win32)("No implementation for %s.%d, setting to 0xdeadbeef\n", |
| name,ordinal); |
| thunk_list->u1.Function = (FARPROC)0xdeadbeef; |
| } |
| } else { |
| pe_name=(PIMAGE_IMPORT_BY_NAME) RVA(thunk_list->u1.AddressOfData); |
| TRACE_(win32)("--- %s %s.%d\n", |
| pe_name->Name,name,pe_name->Hint); |
| thunk_list->u1.Function=MODULE_GetProcAddress( |
| wmImp->module, pe_name->Name, TRUE |
| ); |
| if (!thunk_list->u1.Function) { |
| ERR_(win32)("No implementation for %s.%d, setting to 0xdeadbeef\n", |
| name, pe_name->Hint); |
| thunk_list->u1.Function = (FARPROC)0xdeadbeef; |
| } |
| } |
| thunk_list++; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| static int calc_vma_size( HMODULE hModule ) |
| { |
| int i,vma_size = 0; |
| IMAGE_SECTION_HEADER *pe_seg = PE_SECTIONS(hModule); |
| |
| TRACE_(win32)("Dump of segment table\n"); |
| TRACE_(win32)(" Name VSz Vaddr SzRaw Fileadr *Reloc *Lineum #Reloc #Linum Char\n"); |
| for (i = 0; i< PE_HEADER(hModule)->FileHeader.NumberOfSections; i++) |
| { |
| TRACE_(win32)("%8s: %4.4lx %8.8lx %8.8lx %8.8lx %8.8lx %8.8lx %4.4x %4.4x %8.8lx\n", |
| pe_seg->Name, |
| pe_seg->Misc.VirtualSize, |
| pe_seg->VirtualAddress, |
| pe_seg->SizeOfRawData, |
| pe_seg->PointerToRawData, |
| pe_seg->PointerToRelocations, |
| pe_seg->PointerToLinenumbers, |
| pe_seg->NumberOfRelocations, |
| pe_seg->NumberOfLinenumbers, |
| pe_seg->Characteristics); |
| vma_size=MAX(vma_size, pe_seg->VirtualAddress+pe_seg->SizeOfRawData); |
| vma_size=MAX(vma_size, pe_seg->VirtualAddress+pe_seg->Misc.VirtualSize); |
| pe_seg++; |
| } |
| return vma_size; |
| } |
| |
| static void do_relocations( unsigned int load_addr, IMAGE_BASE_RELOCATION *r ) |
| { |
| int delta = load_addr - PE_HEADER(load_addr)->OptionalHeader.ImageBase; |
| int hdelta = (delta >> 16) & 0xFFFF; |
| int ldelta = delta & 0xFFFF; |
| |
| if(delta == 0) |
| /* Nothing to do */ |
| return; |
| while(r->VirtualAddress) |
| { |
| char *page = (char*) RVA(r->VirtualAddress); |
| int count = (r->SizeOfBlock - 8)/2; |
| int i; |
| TRACE_(fixup)("%x relocations for page %lx\n", |
| count, r->VirtualAddress); |
| /* patching in reverse order */ |
| for(i=0;i<count;i++) |
| { |
| int offset = r->TypeOffset[i] & 0xFFF; |
| int type = r->TypeOffset[i] >> 12; |
| TRACE_(fixup)("patching %x type %x\n", offset, type); |
| switch(type) |
| { |
| case IMAGE_REL_BASED_ABSOLUTE: break; |
| case IMAGE_REL_BASED_HIGH: |
| *(short*)(page+offset) += hdelta; |
| break; |
| case IMAGE_REL_BASED_LOW: |
| *(short*)(page+offset) += ldelta; |
| break; |
| case IMAGE_REL_BASED_HIGHLOW: |
| #if 1 |
| *(int*)(page+offset) += delta; |
| #else |
| { int h=*(unsigned short*)(page+offset); |
| int l=r->TypeOffset[++i]; |
| *(unsigned int*)(page + offset) = (h<<16) + l + delta; |
| } |
| #endif |
| break; |
| case IMAGE_REL_BASED_HIGHADJ: |
| FIXME_(win32)("Don't know what to do with IMAGE_REL_BASED_HIGHADJ\n"); |
| break; |
| case IMAGE_REL_BASED_MIPS_JMPADDR: |
| FIXME_(win32)("Is this a MIPS machine ???\n"); |
| break; |
| default: |
| FIXME_(win32)("Unknown fixup type\n"); |
| break; |
| } |
| } |
| r = (IMAGE_BASE_RELOCATION*)((char*)r + r->SizeOfBlock); |
| } |
| } |
| |
| |
| |
| |
| |
| /********************************************************************** |
| * PE_LoadImage |
| * Load one PE format DLL/EXE into memory |
| * |
| * Unluckily we can't just mmap the sections where we want them, for |
| * (at least) Linux does only support offsets which are page-aligned. |
| * |
| * BUT we have to map the whole image anyway, for Win32 programs sometimes |
| * want to access them. (HMODULE32 point to the start of it) |
| */ |
| HMODULE PE_LoadImage( HFILE hFile, OFSTRUCT *ofs, LPCSTR *modName ) |
| { |
| HMODULE hModule; |
| HANDLE mapping; |
| |
| IMAGE_NT_HEADERS *nt; |
| IMAGE_SECTION_HEADER *pe_sec; |
| IMAGE_DATA_DIRECTORY *dir; |
| BY_HANDLE_FILE_INFORMATION bhfi; |
| int i, rawsize, lowest_va, lowest_fa, vma_size, file_size = 0; |
| DWORD load_addr, aoep, reloc = 0; |
| |
| /* Retrieve file size */ |
| if ( GetFileInformationByHandle( hFile, &bhfi ) ) |
| file_size = bhfi.nFileSizeLow; /* FIXME: 64 bit */ |
| |
| /* Map the PE file somewhere */ |
| mapping = CreateFileMappingA( hFile, NULL, PAGE_READONLY | SEC_COMMIT, |
| 0, 0, NULL ); |
| if (!mapping) |
| { |
| WARN_(win32)("CreateFileMapping error %ld\n", GetLastError() ); |
| return 0; |
| } |
| hModule = (HMODULE)MapViewOfFile( mapping, FILE_MAP_READ, 0, 0, 0 ); |
| CloseHandle( mapping ); |
| if (!hModule) |
| { |
| WARN_(win32)("MapViewOfFile error %ld\n", GetLastError() ); |
| return 0; |
| } |
| nt = PE_HEADER( hModule ); |
| |
| /* Check signature */ |
| if ( nt->Signature != IMAGE_NT_SIGNATURE ) |
| { |
| WARN_(win32)("image doesn't have PE signature, but 0x%08lx\n", |
| nt->Signature ); |
| goto error; |
| } |
| |
| /* Check architecture */ |
| if ( nt->FileHeader.Machine != IMAGE_FILE_MACHINE_I386 ) |
| { |
| MESSAGE("Trying to load PE image for unsupported architecture ("); |
| switch (nt->FileHeader.Machine) |
| { |
| case IMAGE_FILE_MACHINE_UNKNOWN: MESSAGE("Unknown"); break; |
| case IMAGE_FILE_MACHINE_I860: MESSAGE("I860"); break; |
| case IMAGE_FILE_MACHINE_R3000: MESSAGE("R3000"); break; |
| case IMAGE_FILE_MACHINE_R4000: MESSAGE("R4000"); break; |
| case IMAGE_FILE_MACHINE_R10000: MESSAGE("R10000"); break; |
| case IMAGE_FILE_MACHINE_ALPHA: MESSAGE("Alpha"); break; |
| case IMAGE_FILE_MACHINE_POWERPC: MESSAGE("PowerPC"); break; |
| default: MESSAGE("Unknown-%04x", nt->FileHeader.Machine); break; |
| } |
| MESSAGE(")\n"); |
| goto error; |
| } |
| |
| /* Find out how large this executeable should be */ |
| pe_sec = PE_SECTIONS( hModule ); |
| rawsize = 0; lowest_va = 0x10000; lowest_fa = 0x10000; |
| for (i = 0; i < nt->FileHeader.NumberOfSections; i++) |
| { |
| if (lowest_va > pe_sec[i].VirtualAddress) |
| lowest_va = pe_sec[i].VirtualAddress; |
| if (pe_sec[i].Characteristics & IMAGE_SCN_CNT_UNINITIALIZED_DATA) |
| continue; |
| if (pe_sec[i].PointerToRawData < lowest_fa) |
| lowest_fa = pe_sec[i].PointerToRawData; |
| if (pe_sec[i].PointerToRawData+pe_sec[i].SizeOfRawData > rawsize) |
| rawsize = pe_sec[i].PointerToRawData+pe_sec[i].SizeOfRawData; |
| } |
| |
| /* Check file size */ |
| if ( file_size && file_size < rawsize ) |
| { |
| ERR_(win32)("PE module is too small (header: %d, filesize: %d), " |
| "probably truncated download?\n", |
| rawsize, file_size ); |
| goto error; |
| } |
| |
| /* Check entrypoint address */ |
| aoep = nt->OptionalHeader.AddressOfEntryPoint; |
| if (aoep && (aoep < lowest_va)) |
| FIXME_(win32)("WARNING: '%s' has an invalid entrypoint (0x%08lx) " |
| "below the first virtual address (0x%08x) " |
| "(possible Virus Infection or broken binary)!\n", |
| ofs->szPathName, aoep, lowest_va ); |
| |
| |
| /* Allocate memory for module */ |
| load_addr = nt->OptionalHeader.ImageBase; |
| vma_size = calc_vma_size( hModule ); |
| |
| load_addr = (DWORD)VirtualAlloc( (void*)load_addr, vma_size, |
| MEM_RESERVE | MEM_COMMIT, |
| PAGE_EXECUTE_READWRITE ); |
| if (load_addr == 0) |
| { |
| /* We need to perform base relocations */ |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_BASERELOC; |
| if (dir->Size) |
| reloc = dir->VirtualAddress; |
| else |
| { |
| FIXME_(win32)( |
| "FATAL: Need to relocate %s, but no relocation records present (%s). Try to run that file directly !\n", |
| ofs->szPathName, |
| (nt->FileHeader.Characteristics&IMAGE_FILE_RELOCS_STRIPPED)? |
| "stripped during link" : "unknown reason" ); |
| goto error; |
| } |
| |
| load_addr = (DWORD)VirtualAlloc( NULL, vma_size, |
| MEM_RESERVE | MEM_COMMIT, |
| PAGE_EXECUTE_READWRITE ); |
| } |
| |
| TRACE_(win32)("Load addr is %lx (base %lx), range %x\n", |
| load_addr, nt->OptionalHeader.ImageBase, vma_size ); |
| TRACE_(segment)("Loading %s at %lx, range %x\n", |
| ofs->szPathName, load_addr, vma_size ); |
| |
| /* Store the NT header at the load addr */ |
| *(PIMAGE_DOS_HEADER)load_addr = *(PIMAGE_DOS_HEADER)hModule; |
| *PE_HEADER( load_addr ) = *nt; |
| memcpy( PE_SECTIONS(load_addr), PE_SECTIONS(hModule), |
| sizeof(IMAGE_SECTION_HEADER) * nt->FileHeader.NumberOfSections ); |
| #if 0 |
| /* Copies all stuff up to the first section. Including win32 viruses. */ |
| memcpy( load_addr, hModule, lowest_fa ); |
| #endif |
| |
| /* Copy sections into module image */ |
| pe_sec = PE_SECTIONS( hModule ); |
| for (i = 0; i < nt->FileHeader.NumberOfSections; i++, pe_sec++) |
| { |
| /* memcpy only non-BSS segments */ |
| /* FIXME: this should be done by mmap(..MAP_PRIVATE|MAP_FIXED..) |
| * but it is not possible for (at least) Linux needs |
| * a page-aligned offset. |
| */ |
| if(!(pe_sec->Characteristics & IMAGE_SCN_CNT_UNINITIALIZED_DATA)) |
| memcpy((char*)RVA(pe_sec->VirtualAddress), |
| (char*)(hModule + pe_sec->PointerToRawData), |
| pe_sec->SizeOfRawData); |
| #if 0 |
| /* not needed, memory is zero */ |
| if(strcmp(pe_sec->Name, ".bss") == 0) |
| memset((void *)RVA(pe_sec->VirtualAddress), 0, |
| pe_sec->Misc.VirtualSize ? |
| pe_sec->Misc.VirtualSize : |
| pe_sec->SizeOfRawData); |
| #endif |
| } |
| |
| /* Perform base relocation, if necessary */ |
| if ( reloc ) |
| do_relocations( load_addr, (IMAGE_BASE_RELOCATION *)RVA(reloc) ); |
| |
| /* Get module name */ |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_EXPORT; |
| if (dir->Size) |
| *modName = (LPCSTR)RVA(((PIMAGE_EXPORT_DIRECTORY)RVA(dir->VirtualAddress))->Name); |
| |
| /* We don't need the orignal mapping any more */ |
| UnmapViewOfFile( (LPVOID)hModule ); |
| return (HMODULE)load_addr; |
| |
| error: |
| UnmapViewOfFile( (LPVOID)hModule ); |
| return 0; |
| } |
| |
| /********************************************************************** |
| * PE_CreateModule |
| * |
| * Create WINE_MODREF structure for loaded HMODULE32, link it into |
| * process modref_list, and fixup all imports. |
| * |
| * Note: hModule must point to a correctly allocated PE image, |
| * with base relocations applied; the 16-bit dummy module |
| * associated to hModule must already exist. |
| * |
| * Note: This routine must always be called in the context of the |
| * process that is to own the module to be created. |
| */ |
| WINE_MODREF *PE_CreateModule( HMODULE hModule, |
| OFSTRUCT *ofs, DWORD flags, BOOL builtin ) |
| { |
| DWORD load_addr = (DWORD)hModule; /* for RVA */ |
| IMAGE_NT_HEADERS *nt = PE_HEADER(hModule); |
| IMAGE_DATA_DIRECTORY *dir; |
| IMAGE_IMPORT_DESCRIPTOR *pe_import = NULL; |
| IMAGE_EXPORT_DIRECTORY *pe_export = NULL; |
| IMAGE_RESOURCE_DIRECTORY *pe_resource = NULL; |
| WINE_MODREF *wm; |
| int result; |
| char *modname; |
| |
| |
| /* Retrieve DataDirectory entries */ |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_EXPORT; |
| if (dir->Size) |
| pe_export = (PIMAGE_EXPORT_DIRECTORY)RVA(dir->VirtualAddress); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_IMPORT; |
| if (dir->Size) |
| pe_import = (PIMAGE_IMPORT_DESCRIPTOR)RVA(dir->VirtualAddress); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_RESOURCE; |
| if (dir->Size) |
| pe_resource = (PIMAGE_RESOURCE_DIRECTORY)RVA(dir->VirtualAddress); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_EXCEPTION; |
| if (dir->Size) FIXME_(win32)("Exception directory ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_SECURITY; |
| if (dir->Size) FIXME_(win32)("Security directory ignored\n" ); |
| |
| /* IMAGE_DIRECTORY_ENTRY_BASERELOC handled in PE_LoadImage */ |
| /* IMAGE_DIRECTORY_ENTRY_DEBUG handled by debugger */ |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_DEBUG; |
| if (dir->Size) TRACE_(win32)("Debug directory ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_COPYRIGHT; |
| if (dir->Size) FIXME_(win32)("Copyright string ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_GLOBALPTR; |
| if (dir->Size) FIXME_(win32)("Global Pointer (MIPS) ignored\n" ); |
| |
| /* IMAGE_DIRECTORY_ENTRY_TLS handled in PE_TlsInit */ |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_LOAD_CONFIG; |
| if (dir->Size) FIXME_(win32)("Load Configuration directory ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_BOUND_IMPORT; |
| if (dir->Size) TRACE_(win32)("Bound Import directory ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_IAT; |
| if (dir->Size) TRACE_(win32)("Import Address Table directory ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_DELAY_IMPORT; |
| if (dir->Size) |
| { |
| TRACE_(win32)("Delayed import, stub calls LoadLibrary\n" ); |
| /* |
| * Nothing to do here. |
| */ |
| |
| #ifdef ImgDelayDescr |
| /* |
| * This code is useful to observe what the heck is going on. |
| */ |
| { |
| ImgDelayDescr *pe_delay = NULL; |
| pe_delay = (PImgDelayDescr)RVA(dir->VirtualAddress); |
| TRACE_(delayhlp)("pe_delay->grAttrs = %08x\n", pe_delay->grAttrs); |
| TRACE_(delayhlp)("pe_delay->szName = %s\n", pe_delay->szName); |
| TRACE_(delayhlp)("pe_delay->phmod = %08x\n", pe_delay->phmod); |
| TRACE_(delayhlp)("pe_delay->pIAT = %08x\n", pe_delay->pIAT); |
| TRACE_(delayhlp)("pe_delay->pINT = %08x\n", pe_delay->pINT); |
| TRACE_(delayhlp)("pe_delay->pBoundIAT = %08x\n", pe_delay->pBoundIAT); |
| TRACE_(delayhlp)("pe_delay->pUnloadIAT = %08x\n", pe_delay->pUnloadIAT); |
| TRACE_(delayhlp)("pe_delay->dwTimeStamp = %08x\n", pe_delay->dwTimeStamp); |
| } |
| #endif /* ImgDelayDescr */ |
| } |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_COM_DESCRIPTOR; |
| if (dir->Size) FIXME_(win32)("Unknown directory 14 ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+15; |
| if (dir->Size) FIXME_(win32)("Unknown directory 15 ignored\n" ); |
| |
| |
| /* Allocate and fill WINE_MODREF */ |
| |
| wm = (WINE_MODREF *)HeapAlloc( GetProcessHeap(), |
| HEAP_ZERO_MEMORY, sizeof(*wm) ); |
| wm->module = hModule; |
| |
| if ( builtin ) |
| wm->flags |= WINE_MODREF_INTERNAL; |
| if ( flags & DONT_RESOLVE_DLL_REFERENCES ) |
| wm->flags |= WINE_MODREF_DONT_RESOLVE_REFS; |
| if ( flags & LOAD_LIBRARY_AS_DATAFILE ) |
| wm->flags |= WINE_MODREF_LOAD_AS_DATAFILE; |
| |
| wm->type = MODULE32_PE; |
| wm->binfmt.pe.pe_export = pe_export; |
| wm->binfmt.pe.pe_import = pe_import; |
| wm->binfmt.pe.pe_resource = pe_resource; |
| wm->binfmt.pe.tlsindex = -1; |
| |
| if ( pe_export ) |
| modname = (char *)RVA( pe_export->Name ); |
| else |
| { |
| /* try to find out the name from the OFSTRUCT */ |
| char *s; |
| modname = ofs->szPathName; |
| if ((s=strrchr(modname,'\\'))) modname = s+1; |
| } |
| wm->modname = HEAP_strdupA( GetProcessHeap(), 0, modname ); |
| |
| result = GetLongPathNameA( ofs->szPathName, NULL, 0 ); |
| wm->longname = (char *)HeapAlloc( GetProcessHeap(), 0, result+1 ); |
| GetLongPathNameA( ofs->szPathName, wm->longname, result+1 ); |
| |
| wm->shortname = HEAP_strdupA( GetProcessHeap(), 0, ofs->szPathName ); |
| |
| /* Link MODREF into process list */ |
| |
| EnterCriticalSection( &PROCESS_Current()->crit_section ); |
| |
| wm->next = PROCESS_Current()->modref_list; |
| PROCESS_Current()->modref_list = wm; |
| if ( wm->next ) wm->next->prev = wm; |
| |
| if ( !(nt->FileHeader.Characteristics & IMAGE_FILE_DLL) ) |
| { |
| if ( PROCESS_Current()->exe_modref ) |
| FIXME_(win32)("overwriting old exe_modref... arrgh\n" ); |
| PROCESS_Current()->exe_modref = wm; |
| } |
| |
| LeaveCriticalSection( &PROCESS_Current()->crit_section ); |
| |
| |
| /* Dump Exports */ |
| |
| if ( pe_export ) |
| dump_exports( hModule ); |
| |
| /* Fixup Imports */ |
| |
| if ( pe_import && fixup_imports( wm ) |
| && !( wm->flags & WINE_MODREF_LOAD_AS_DATAFILE ) |
| && !( wm->flags & WINE_MODREF_DONT_RESOLVE_REFS ) ) |
| { |
| /* remove entry from modref chain */ |
| EnterCriticalSection( &PROCESS_Current()->crit_section ); |
| |
| if ( !wm->prev ) |
| PROCESS_Current()->modref_list = wm->next; |
| else |
| wm->prev->next = wm->next; |
| |
| if ( wm->next ) wm->next->prev = wm->prev; |
| wm->next = wm->prev = NULL; |
| |
| LeaveCriticalSection( &PROCESS_Current()->crit_section ); |
| |
| /* FIXME: there are several more dangling references |
| * left. Including dlls loaded by this dll before the |
| * failed one. Unrolling is rather difficult with the |
| * current structure and we can leave it them lying |
| * around with no problems, so we don't care. |
| * As these might reference our wm, we don't free it. |
| */ |
| return NULL; |
| } |
| |
| return wm; |
| } |
| |
| /****************************************************************************** |
| * The PE Library Loader frontend. |
| * FIXME: handle the flags. |
| */ |
| WINE_MODREF *PE_LoadLibraryExA (LPCSTR name, DWORD flags, DWORD *err) |
| { |
| LPCSTR modName = NULL; |
| OFSTRUCT ofs; |
| HMODULE hModule32; |
| HMODULE16 hModule16; |
| NE_MODULE *pModule; |
| WINE_MODREF *wm; |
| char dllname[256], *p; |
| HFILE hFile; |
| |
| /* Append .DLL to name if no extension present */ |
| strcpy( dllname, name ); |
| if (!(p = strrchr( dllname, '.')) || strchr( p, '/' ) || strchr( p, '\\')) |
| strcat( dllname, ".DLL" ); |
| |
| /* Load PE module */ |
| hFile = OpenFile( dllname, &ofs, OF_READ | OF_SHARE_DENY_WRITE ); |
| if ( hFile != HFILE_ERROR ) |
| { |
| hModule32 = PE_LoadImage( hFile, &ofs, &modName ); |
| CloseHandle( hFile ); |
| if(!hModule32) |
| { |
| *err = ERROR_OUTOFMEMORY; /* Not entirely right, but good enough */ |
| return NULL; |
| } |
| } |
| else |
| { |
| *err = ERROR_FILE_NOT_FOUND; |
| return NULL; |
| } |
| |
| /* Create 16-bit dummy module */ |
| if ((hModule16 = MODULE_CreateDummyModule( &ofs, modName )) < 32) |
| { |
| *err = (DWORD)hModule16; /* This should give the correct error */ |
| return NULL; |
| } |
| pModule = (NE_MODULE *)GlobalLock16( hModule16 ); |
| pModule->flags = NE_FFLAGS_LIBMODULE | NE_FFLAGS_SINGLEDATA | NE_FFLAGS_WIN32; |
| pModule->module32 = hModule32; |
| |
| /* Create 32-bit MODREF */ |
| if ( !(wm = PE_CreateModule( hModule32, &ofs, flags, FALSE )) ) |
| { |
| ERR_(win32)("can't load %s\n",ofs.szPathName); |
| FreeLibrary16( hModule16 ); |
| *err = ERROR_OUTOFMEMORY; |
| return NULL; |
| } |
| |
| if (wm->binfmt.pe.pe_export) |
| SNOOP_RegisterDLL(wm->module,wm->modname,wm->binfmt.pe.pe_export->NumberOfFunctions); |
| |
| *err = 0; |
| return wm; |
| } |
| |
| |
| /***************************************************************************** |
| * PE_UnloadLibrary |
| * |
| * Unload the library unmapping the image and freeing the modref structure. |
| */ |
| void PE_UnloadLibrary(WINE_MODREF *wm) |
| { |
| /* FIXME, do something here */ |
| } |
| |
| /***************************************************************************** |
| * Load the PE main .EXE. All other loading is done by PE_LoadLibraryExA |
| * FIXME: this function should use PE_LoadLibraryExA, but currently can't |
| * due to the PROCESS_Create stuff. |
| */ |
| BOOL PE_CreateProcess( HFILE hFile, OFSTRUCT *ofs, LPCSTR cmd_line, LPCSTR env, |
| LPSECURITY_ATTRIBUTES psa, LPSECURITY_ATTRIBUTES tsa, |
| BOOL inherit, LPSTARTUPINFOA startup, |
| LPPROCESS_INFORMATION info ) |
| { |
| LPCSTR modName = NULL; |
| HMODULE16 hModule16; |
| HMODULE hModule32; |
| NE_MODULE *pModule; |
| |
| /* Load file */ |
| if ( (hModule32 = PE_LoadImage( hFile, ofs, &modName )) < 32 ) |
| { |
| SetLastError( hModule32 ); |
| return FALSE; |
| } |
| #if 0 |
| if (PE_HEADER(hModule32)->FileHeader.Characteristics & IMAGE_FILE_DLL) |
| { |
| SetLastError( 20 ); /* FIXME: not the right error code */ |
| return FALSE; |
| } |
| #endif |
| |
| /* Create 16-bit dummy module */ |
| if ( (hModule16 = MODULE_CreateDummyModule( ofs, modName )) < 32 ) |
| { |
| SetLastError( hModule16 ); |
| return FALSE; |
| } |
| pModule = (NE_MODULE *)GlobalLock16( hModule16 ); |
| pModule->flags = NE_FFLAGS_WIN32; |
| pModule->module32 = hModule32; |
| |
| /* Create new process */ |
| if ( !PROCESS_Create( pModule, cmd_line, env, |
| 0, 0, psa, tsa, inherit, startup, info ) ) |
| return FALSE; |
| |
| /* Note: PE_CreateModule and the remaining process initialization will |
| be done in the context of the new process, in TASK_CallToStart */ |
| |
| return TRUE; |
| } |
| |
| /********************************************************************* |
| * PE_UnloadImage [internal] |
| */ |
| int PE_UnloadImage( HMODULE hModule ) |
| { |
| FIXME_(win32)("stub.\n"); |
| /* free resources, image, unmap */ |
| return 1; |
| } |
| |
| /* Called if the library is loaded or freed. |
| * NOTE: if a thread attaches a DLL, the current thread will only do |
| * DLL_PROCESS_ATTACH. Only new created threads do DLL_THREAD_ATTACH |
| * (SDK) |
| */ |
| BOOL PE_InitDLL( WINE_MODREF *wm, DWORD type, LPVOID lpReserved ) |
| { |
| BOOL retv = TRUE; |
| assert( wm->type == MODULE32_PE ); |
| |
| /* Is this a library? And has it got an entrypoint? */ |
| if ((PE_HEADER(wm->module)->FileHeader.Characteristics & IMAGE_FILE_DLL) && |
| (PE_HEADER(wm->module)->OptionalHeader.AddressOfEntryPoint) |
| ) { |
| DLLENTRYPROC entry = (void*)RVA_PTR( wm->module,OptionalHeader.AddressOfEntryPoint ); |
| TRACE_(relay)("CallTo32(entryproc=%p,module=%08x,type=%ld,res=%p)\n", |
| entry, wm->module, type, lpReserved ); |
| |
| retv = entry( wm->module, type, lpReserved ); |
| } |
| |
| return retv; |
| } |
| |
| /************************************************************************ |
| * PE_InitTls (internal) |
| * |
| * If included, initialises the thread local storages of modules. |
| * Pointers in those structs are not RVAs but real pointers which have been |
| * relocated by do_relocations() already. |
| */ |
| void PE_InitTls( void ) |
| { |
| WINE_MODREF *wm; |
| PE_MODREF *pem; |
| IMAGE_NT_HEADERS *peh; |
| DWORD size,datasize; |
| LPVOID mem; |
| PIMAGE_TLS_DIRECTORY pdir; |
| int delta; |
| |
| for (wm = PROCESS_Current()->modref_list;wm;wm=wm->next) { |
| if (wm->type!=MODULE32_PE) |
| continue; |
| pem = &(wm->binfmt.pe); |
| peh = PE_HEADER(wm->module); |
| delta = wm->module - peh->OptionalHeader.ImageBase; |
| if (!peh->OptionalHeader.DataDirectory[IMAGE_FILE_THREAD_LOCAL_STORAGE].VirtualAddress) |
| continue; |
| pdir = (LPVOID)(wm->module + peh->OptionalHeader. |
| DataDirectory[IMAGE_FILE_THREAD_LOCAL_STORAGE].VirtualAddress); |
| |
| |
| if ( pem->tlsindex == -1 ) { |
| pem->tlsindex = TlsAlloc(); |
| *pdir->AddressOfIndex=pem->tlsindex; |
| } |
| datasize= pdir->EndAddressOfRawData-pdir->StartAddressOfRawData; |
| size = datasize + pdir->SizeOfZeroFill; |
| mem=VirtualAlloc(0,size,MEM_RESERVE|MEM_COMMIT,PAGE_READWRITE); |
| memcpy(mem,(LPVOID)pdir->StartAddressOfRawData,datasize); |
| if (pdir->AddressOfCallBacks) { |
| PIMAGE_TLS_CALLBACK *cbs = |
| (PIMAGE_TLS_CALLBACK *)pdir->AddressOfCallBacks; |
| |
| if (*cbs) |
| FIXME_(win32)("TLS Callbacks aren't going to be called\n"); |
| } |
| |
| TlsSetValue( pem->tlsindex, mem ); |
| } |
| } |
| |
