documentation/running.sgml - wine - Git at Google

   <chapter id="running">
     <title>Running Wine</title>

     <para>
       Written by &name-john-sheets; <email>&email-john-sheets;</email>
     </para>

     <sect1 id="running-wine">
       <title>How to run Wine</title>
       <para>
         Wine is a very complicated piece of software with many ways to
         adjust how it runs.  With very few exceptions, you can
         activate the same set of features through the <link
         linkend="configuring">configuration file </link> as you can
         with command-line parameters.  In this chapter, we'll briefly
         discuss these parameters, and match them up with their
         corresponding configuration variables.
       </para>

       <para>
         You can invoke the <command>wine --help</command> command to
         get a listing of all Wine's command-line parameters:
       </para>
       <para>
         <screen>
 Usage: ./wine [options] program_name [arguments]

 Options:
    --debugmsg name  Turn debugging-messages on or off
    --dll name       Enable or disable built-in DLLs
    --dosver x.xx    DOS version to imitate (e.g. 6.22)
                     Only valid with --winver win31
    --help,-h        Show this help message
    --managed        Allow the window manager to manage created windows
    --version,-v     Display the Wine version
    --winver         Version to imitate (win95,nt40,win31,nt2k,win98,nt351,win30,win20)
         </screen>
       </para>

       <para>
         You can specify as many options as you want, if any.
         Typically, you will want to have your configuration file set
         up with a sensible set of defaults; in this case, you can run
         <command>wine</command> without explicitly listing any
         options.  In rare cases, you might want to override certain
         parameters on the command line.
       </para>
       <para>
         After the options, you should put the name of the file you
         want <command>wine</command> to execute.  If the executable is
         in the <parameter>Path</parameter> parameter in the
         configuration file, you can simply give the executable file
         name.  However, if the executable is not in
         <parameter>Path</parameter>, you must give the full path to
         the executable (in Windows format, not UNIX format!).  For
         example, given a <parameter>Path</parameter> of the following:
       </para>
       <screen>
 [wine]
 "Path"="c:\windows;c:\windows\system;e:\;e:\test;f:\"
       </screen>
       <para>
         You could run the file
         <filename>c:\windows\system\foo.exe</filename> with:
       </para>
       <screen>
 <prompt>$</prompt> <userinput>wine foo.exe</userinput>
       </screen>
       <para>
         However, you would have to run the file
         <filename>c:\myapps\foo.exe</filename> with this command:
       </para>
       <screen>
 <prompt>$</prompt> <userinput>wine c:\myapps\foo.exe</userinput>
       </screen>
       <para>
         Finally, if you want to pass any parameters to your windows
         application, you can list them at the end, just after the
         executable name.  Thus, to run the imaginary
         <command>foo.exe</command> Windows application with its
         <parameter>/advanced</parameter> mode parameter, while
         invoking Wine in <link
         linkend="managed-parameter"><parameter>--managed</parameter>
         mode</link>, you would do something like this:
       </para>
       <screen>
 <prompt>$</prompt> <userinput>wine --managed foo.exe /advanced</userinput>
       </screen>
       <para>
         In other words, options that affect Wine should come
         <emphasis>before</emphasis> the Windows program name, while
         options that affect the Windows program should come
         <emphasis>after</emphasis> it.
       </para>
     </sect1>

     <sect1 id="command-line-options">
       <title>Command-Line Options</title>

       <sect2 id="config-parameter">
         <title>--debugmsg [channels]</title>
         <para>
           Wine isn't perfect, and many Windows applications still
           don't run without bugs under Wine (but then, many of them
           don't run without bugs under native Windows either!).  To
           make it easier for people to track down the causes behind
           each bug, Wine provides a number of <firstterm>debug
           channels</firstterm> that you can tap into.
         </para>
         <para>
           Each debug channel, when activated, will trigger logging
           messages to be displayed to the console where you invoked
           <command>wine</command>.  From there you can redirect the
           messages to a file and examine it at your leisure.  But be
           forewarned!  Some debug channels can generate incredible
           volumes of log messages.  Among the most prolific offenders
           are <parameter>relay</parameter> which spits out a log
           message every time a win32 function is called,
           <parameter>win</parameter> which tracks windows message
           passing, and of course <parameter>all</parameter> which is
           an alias for every single debug channel that exists.  For a
           complex application, your debug logs can easily top 1 MB and
           higher.  A <parameter>relay</parameter> trace can often
           generate more than 10 MB of log messages, depending on how
           long you run the application.  Logging does slow down Wine
           quite a bit, so don't use <parameter>--debugmsg</parameter>
           unless you really do want log files.
         </para>
         <para>
           Within each debug channel, you can further specify a
           <firstterm>message class</firstterm>, to filter out the
           different severities of errors.  The four message classes
           are:
           <simplelist type="inline">
             <member><parameter>trace</parameter></member>
             <member><parameter>fixme</parameter></member>
             <member><parameter>warn</parameter></member>
             <member><parameter>err</parameter></member>
           </simplelist>.
         </para>
         <para>
           To turn on a debug channel, use the form
           <parameter>class+channel</parameter>.  To turn it off, use
           <parameter>class-channel</parameter>.  To list more than one
           channel in the same <parameter>--debugmsg</parameter>
           option, separate them with commas.  For example, to request
           <parameter>warn</parameter> class messages in the
           <parameter>heap</parameter> debug channel, you could invoke
           <command>wine</command> like this:
         </para>
         <screen>
 <prompt>$</prompt> <userinput>wine --debugmsg warn+heap <replaceable>program_name</replaceable></userinput>
         </screen>
         <para>
           If you leave off the message class, <command>wine</command>
           will display messages from all four classes for that channel:
         </para>
         <screen>
 <prompt>$</prompt> <userinput>wine --debugmsg +heap <replaceable>program_name</replaceable></userinput>
         </screen>
         <para>
           If you wanted to see log messages for everything except the
           relay channel, you might do something like this:
         </para>
         <screen>
 <prompt>$</prompt> <userinput>wine --debugmsg +all,-relay <replaceable>program_name</replaceable></userinput>
         </screen>
         <para>
           Here is a master list of all the debug channels and classes
           in Wine.  More channels might be added to (or subtracted
           from) later versions.
         </para>
         <screen>
 all       accel     advapi    animate   aspi      atom      avifile   bitblt
 bitmap    caret     cdrom     class     clipboard clipping  combo     comboex
 comm      commctrl  commdlg   console   crtdll    cursor    datetime  dc
 ddeml     ddraw     debug     debugstr  delayhlp  dialog    dinput    dll
 dosfs     dosmem    dplay     driver    dsound    edit      elfdll    enhmetafile
 event     exec      file      fixup     font      gdi       global    graphics
 header    heap      hook      hotkey    icmp      icon      imagehlp  imagelist
 imm       int       int10     int16     int17     int19     int21     int31
 io        ipaddress joystick  key       keyboard  ldt       listbox   listview
 local     mci       mcianim   mciavi    mcicda    mcimidi   mciwave   mdi
 menu      message   metafile  midi      mmaux     mmio      mmsys     mmtime
 module    monthcal  mpr       msacm     msg       msvideo   nativefont nonclient
 ntdll     odbc      ole       opengl    pager     palette   pidl      print
 process   profile   progress  prop      propsheet psapi     psdrv     ras
 rebar     reg       region    relay     resource  richedit  scroll    segment
 seh       selector  sendmsg   server    setupapi  setupx    shell     snoop
 sound     static    statusbar storage   stress    string    syscolor  system
 tab       tape      tapi      task      text      thread    thunk     timer
 toolbar   toolhelp  tooltips  trackbar  treeview  ttydrv    tweak     typelib
 updown    ver       virtual   vxd       wave      win       win16drv  win32
 wing      wininet   winsock   winspool  wnet      x11       x11drv
         </screen>
         <para>
           For more details about debug channels, check out the
           <ulink url="http://wine.codeweavers.com/docs/wine-devel/">
             The Wine Developer's Guide</ulink>.
         </para>
       </sect2>

       <sect2>
         <title>--dll</title>
         <para>

         </para>
       </sect2>

       <sect2>
         <title>--dosver</title>
         <para>

         </para>
       </sect2>

       <sect2>
         <title>--help</title>
         <para>

         </para>
       </sect2>

       <sect2 id="managed-parameter">
         <title>--managed</title>
         <para>

         </para>
       </sect2>

       <sect2>
         <title>--version</title>
         <para>

         </para>
       </sect2>

       <sect2>
         <title>--winver</title>
         <para>

         </para>
       </sect2>
     </sect1>
   </chapter>

 <!-- Keep this comment at the end of the file
 Local variables:
 mode: sgml
 sgml-parent-document:("wine-doc.sgml" "set" "book" "chapter" "")
 End:
 -->
	<chapter id="running">
	<title>Running Wine</title>

	<para>
	Written by &name-john-sheets; <email>&email-john-sheets;</email>
	</para>

	<sect1 id="running-wine">
	<title>How to run Wine</title>
	<para>
	Wine is a very complicated piece of software with many ways to
	adjust how it runs. With very few exceptions, you can
	activate the same set of features through the <link
	linkend="configuring">configuration file </link> as you can
	with command-line parameters. In this chapter, we'll briefly
	discuss these parameters, and match them up with their
	corresponding configuration variables.
	</para>

	<para>
	You can invoke the <command>wine --help</command> command to
	get a listing of all Wine's command-line parameters:
	</para>
	<para>
	<screen>
	Usage: ./wine [options] program_name [arguments]

	Options:
	--debugmsg name Turn debugging-messages on or off
	--dll name Enable or disable built-in DLLs
	--dosver x.xx DOS version to imitate (e.g. 6.22)
	Only valid with --winver win31
	--help,-h Show this help message
	--managed Allow the window manager to manage created windows
	--version,-v Display the Wine version
	--winver Version to imitate (win95,nt40,win31,nt2k,win98,nt351,win30,win20)
	</screen>
	</para>

	<para>
	You can specify as many options as you want, if any.
	Typically, you will want to have your configuration file set
	up with a sensible set of defaults; in this case, you can run
	<command>wine</command> without explicitly listing any
	options. In rare cases, you might want to override certain
	parameters on the command line.
	</para>
	<para>
	After the options, you should put the name of the file you
	want <command>wine</command> to execute. If the executable is
	in the <parameter>Path</parameter> parameter in the
	configuration file, you can simply give the executable file
	name. However, if the executable is not in
	<parameter>Path</parameter>, you must give the full path to
	the executable (in Windows format, not UNIX format!). For
	example, given a <parameter>Path</parameter> of the following:
	</para>
	<screen>
	[wine]
	"Path"="c:\windows;c:\windows\system;e:\;e:\test;f:\"
	</screen>
	<para>
	You could run the file
	<filename>c:\windows\system\foo.exe</filename> with:
	</para>
	<screen>
	<prompt>$</prompt> <userinput>wine foo.exe</userinput>
	</screen>
	<para>
	However, you would have to run the file
	<filename>c:\myapps\foo.exe</filename> with this command:
	</para>
	<screen>
	<prompt>$</prompt> <userinput>wine c:\myapps\foo.exe</userinput>
	</screen>
	<para>
	Finally, if you want to pass any parameters to your windows
	application, you can list them at the end, just after the
	executable name. Thus, to run the imaginary
	<command>foo.exe</command> Windows application with its
	<parameter>/advanced</parameter> mode parameter, while
	invoking Wine in <link
	linkend="managed-parameter"><parameter>--managed</parameter>
	mode</link>, you would do something like this:
	</para>
	<screen>
	<prompt>$</prompt> <userinput>wine --managed foo.exe /advanced</userinput>
	</screen>
	<para>
	In other words, options that affect Wine should come
	<emphasis>before</emphasis> the Windows program name, while
	options that affect the Windows program should come
	<emphasis>after</emphasis> it.
	</para>
	</sect1>

	<sect1 id="command-line-options">
	<title>Command-Line Options</title>

	<sect2 id="config-parameter">
	<title>--debugmsg [channels]</title>
	<para>
	Wine isn't perfect, and many Windows applications still
	don't run without bugs under Wine (but then, many of them
	don't run without bugs under native Windows either!). To
	make it easier for people to track down the causes behind
	each bug, Wine provides a number of <firstterm>debug
	channels</firstterm> that you can tap into.
	</para>
	<para>
	Each debug channel, when activated, will trigger logging
	messages to be displayed to the console where you invoked
	<command>wine</command>. From there you can redirect the
	messages to a file and examine it at your leisure. But be
	forewarned! Some debug channels can generate incredible
	volumes of log messages. Among the most prolific offenders
	are <parameter>relay</parameter> which spits out a log
	message every time a win32 function is called,
	<parameter>win</parameter> which tracks windows message
	passing, and of course <parameter>all</parameter> which is
	an alias for every single debug channel that exists. For a
	complex application, your debug logs can easily top 1 MB and
	higher. A <parameter>relay</parameter> trace can often
	generate more than 10 MB of log messages, depending on how
	long you run the application. Logging does slow down Wine
	quite a bit, so don't use <parameter>--debugmsg</parameter>
	unless you really do want log files.
	</para>
	<para>
	Within each debug channel, you can further specify a
	<firstterm>message class</firstterm>, to filter out the
	different severities of errors. The four message classes
	are:
	<simplelist type="inline">
	<member><parameter>trace</parameter></member>
	<member><parameter>fixme</parameter></member>
	<member><parameter>warn</parameter></member>
	<member><parameter>err</parameter></member>
	</simplelist>.
	</para>
	<para>
	To turn on a debug channel, use the form
	<parameter>class+channel</parameter>. To turn it off, use
	<parameter>class-channel</parameter>. To list more than one
	channel in the same <parameter>--debugmsg</parameter>
	option, separate them with commas. For example, to request
	<parameter>warn</parameter> class messages in the
	<parameter>heap</parameter> debug channel, you could invoke
	<command>wine</command> like this:
	</para>
	<screen>
	<prompt>$</prompt> <userinput>wine --debugmsg warn+heap <replaceable>program_name</replaceable></userinput>
	</screen>
	<para>
	If you leave off the message class, <command>wine</command>
	will display messages from all four classes for that channel:
	</para>
	<screen>
	<prompt>$</prompt> <userinput>wine --debugmsg +heap <replaceable>program_name</replaceable></userinput>
	</screen>
	<para>
	If you wanted to see log messages for everything except the
	relay channel, you might do something like this:
	</para>
	<screen>
	<prompt>$</prompt> <userinput>wine --debugmsg +all,-relay <replaceable>program_name</replaceable></userinput>
	</screen>
	<para>
	Here is a master list of all the debug channels and classes
	in Wine. More channels might be added to (or subtracted
	from) later versions.
	</para>
	<screen>
	all accel advapi animate aspi atom avifile bitblt
	bitmap caret cdrom class clipboard clipping combo comboex
	comm commctrl commdlg console crtdll cursor datetime dc
	ddeml ddraw debug debugstr delayhlp dialog dinput dll
	dosfs dosmem dplay driver dsound edit elfdll enhmetafile
	event exec file fixup font gdi global graphics
	header heap hook hotkey icmp icon imagehlp imagelist
	imm int int10 int16 int17 int19 int21 int31
	io ipaddress joystick key keyboard ldt listbox listview
	local mci mcianim mciavi mcicda mcimidi mciwave mdi
	menu message metafile midi mmaux mmio mmsys mmtime
	module monthcal mpr msacm msg msvideo nativefont nonclient
	ntdll odbc ole opengl pager palette pidl print
	process profile progress prop propsheet psapi psdrv ras
	rebar reg region relay resource richedit scroll segment
	seh selector sendmsg server setupapi setupx shell snoop
	sound static statusbar storage stress string syscolor system
	tab tape tapi task text thread thunk timer
	toolbar toolhelp tooltips trackbar treeview ttydrv tweak typelib
	updown ver virtual vxd wave win win16drv win32
	wing wininet winsock winspool wnet x11 x11drv
	</screen>
	<para>
	For more details about debug channels, check out the
	<ulink url="http://wine.codeweavers.com/docs/wine-devel/">
	The Wine Developer's Guide</ulink>.
	</para>
	</sect2>

	<sect2>
	<title>--dll</title>
	<para>

	</para>
	</sect2>

	<sect2>
	<title>--dosver</title>
	<para>

	</para>
	</sect2>

	<sect2>
	<title>--help</title>
	<para>

	</para>
	</sect2>

	<sect2 id="managed-parameter">
	<title>--managed</title>
	<para>

	</para>
	</sect2>

	<sect2>
	<title>--version</title>
	<para>

	</para>
	</sect2>

	<sect2>
	<title>--winver</title>
	<para>

	</para>
	</sect2>
	</sect1>
	</chapter>

	<!-- Keep this comment at the end of the file
	Local variables:
	mode: sgml
	sgml-parent-document:("wine-doc.sgml" "set" "book" "chapter" "")
	End:
	-->