| /* |
| * Copyright 1994 Eric Youndale & Erik Bos |
| * Copyright 1995 Martin von Löwis |
| * Copyright 1996-98 Marcus Meissner |
| * |
| * based on Eric Youndale's pe-test and: |
| * |
| * ftp.microsoft.com:/pub/developer/MSDN/CD8/PEFILE.ZIP |
| * make that: |
| * ftp.microsoft.com:/developr/MSDN/OctCD/PEFILE.ZIP |
| */ |
| /* Notes: |
| * Before you start changing something in this file be aware of the following: |
| * |
| * - There are several functions called recursively. In a very subtle and |
| * obscure way. DLLs can reference each other recursively etc. |
| * - If you want to enhance, speed up or clean up something in here, think |
| * twice WHY it is implemented in that strange way. There is usually a reason. |
| * Though sometimes it might just be lazyness ;) |
| * - In PE_MapImage, right before fixup_imports() all external and internal |
| * state MUST be correct since this function can be called with the SAME image |
| * AGAIN. (Thats recursion for you.) That means MODREF.module and |
| * NE_MODULE.module32. |
| */ |
| |
| #include "config.h" |
| |
| #include <sys/types.h> |
| #ifdef HAVE_SYS_MMAN_H |
| #include <sys/mman.h> |
| #endif |
| #include <string.h> |
| #include "wine/winbase16.h" |
| #include "winerror.h" |
| #include "snoop.h" |
| #include "server.h" |
| #include "debugtools.h" |
| |
| DEFAULT_DEBUG_CHANNEL(win32); |
| DECLARE_DEBUG_CHANNEL(delayhlp); |
| DECLARE_DEBUG_CHANNEL(fixup); |
| DECLARE_DEBUG_CHANNEL(module); |
| DECLARE_DEBUG_CHANNEL(relay); |
| DECLARE_DEBUG_CHANNEL(segment); |
| |
| |
| static IMAGE_EXPORT_DIRECTORY *get_exports( HMODULE hmod ) |
| { |
| IMAGE_EXPORT_DIRECTORY *ret = NULL; |
| IMAGE_DATA_DIRECTORY *dir = PE_HEADER(hmod)->OptionalHeader.DataDirectory |
| + IMAGE_DIRECTORY_ENTRY_EXPORT; |
| if (dir->Size && dir->VirtualAddress) |
| ret = (IMAGE_EXPORT_DIRECTORY *)((char *)hmod + dir->VirtualAddress); |
| return ret; |
| } |
| |
| static IMAGE_IMPORT_DESCRIPTOR *get_imports( HMODULE hmod ) |
| { |
| IMAGE_IMPORT_DESCRIPTOR *ret = NULL; |
| IMAGE_DATA_DIRECTORY *dir = PE_HEADER(hmod)->OptionalHeader.DataDirectory |
| + IMAGE_DIRECTORY_ENTRY_IMPORT; |
| if (dir->Size && dir->VirtualAddress) |
| ret = (IMAGE_IMPORT_DESCRIPTOR *)((char *)hmod + dir->VirtualAddress); |
| return ret; |
| } |
| |
| |
| /* convert PE image VirtualAddress to Real Address */ |
| #define RVA(x) ((void *)((char *)load_addr+(unsigned int)(x))) |
| |
| #define AdjustPtr(ptr,delta) ((char *)(ptr) + (delta)) |
| |
| void dump_exports( HMODULE hModule ) |
| { |
| char *Module; |
| int i, j; |
| WORD *ordinal; |
| DWORD *function,*functions; |
| BYTE **name; |
| unsigned int load_addr = hModule; |
| |
| DWORD rva_start = PE_HEADER(hModule)->OptionalHeader |
| .DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].VirtualAddress; |
| DWORD rva_end = rva_start + PE_HEADER(hModule)->OptionalHeader |
| .DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].Size; |
| IMAGE_EXPORT_DIRECTORY *pe_exports = (IMAGE_EXPORT_DIRECTORY*)RVA(rva_start); |
| |
| Module = (char*)RVA(pe_exports->Name); |
| TRACE("*******EXPORT DATA*******\n"); |
| TRACE("Module name is %s, %ld functions, %ld names\n", |
| Module, pe_exports->NumberOfFunctions, pe_exports->NumberOfNames); |
| |
| ordinal = RVA(pe_exports->AddressOfNameOrdinals); |
| functions = function = RVA(pe_exports->AddressOfFunctions); |
| name = RVA(pe_exports->AddressOfNames); |
| |
| TRACE(" Ord RVA Addr Name\n" ); |
| for (i=0;i<pe_exports->NumberOfFunctions;i++, function++) |
| { |
| if (!*function) continue; /* No such function */ |
| if (TRACE_ON(win32)) |
| { |
| DPRINTF( "%4ld %08lx %p", i + pe_exports->Base, *function, RVA(*function) ); |
| /* Check if we have a name for it */ |
| for (j = 0; j < pe_exports->NumberOfNames; j++) |
| if (ordinal[j] == i) |
| { |
| DPRINTF( " %s", (char*)RVA(name[j]) ); |
| break; |
| } |
| if ((*function >= rva_start) && (*function <= rva_end)) |
| DPRINTF(" (forwarded -> %s)", (char *)RVA(*function)); |
| DPRINTF("\n"); |
| } |
| } |
| } |
| |
| /* Look up the specified function or ordinal in the export list: |
| * If it is a string: |
| * - look up the name in the name list. |
| * - look up the ordinal with that index. |
| * - use the ordinal as offset into the functionlist |
| * If it is an ordinal: |
| * - use ordinal-pe_export->Base as offset into the function list |
| */ |
| static FARPROC PE_FindExportedFunction( |
| WINE_MODREF *wm, /* [in] WINE modreference */ |
| LPCSTR funcName, /* [in] function name */ |
| BOOL snoop ) |
| { |
| WORD * ordinals; |
| DWORD * function; |
| BYTE ** name, *ename = NULL; |
| int i, ordinal; |
| unsigned int load_addr = wm->module; |
| DWORD rva_start, rva_end, addr; |
| char * forward; |
| IMAGE_EXPORT_DIRECTORY *exports = get_exports(wm->module); |
| |
| if (HIWORD(funcName)) |
| TRACE("(%s)\n",funcName); |
| else |
| TRACE("(%d)\n",(int)funcName); |
| if (!exports) { |
| /* Not a fatal problem, some apps do |
| * GetProcAddress(0,"RegisterPenApp") which triggers this |
| * case. |
| */ |
| WARN("Module %08x(%s)/MODREF %p doesn't have a exports table.\n",wm->module,wm->modname,wm); |
| return NULL; |
| } |
| ordinals= RVA(exports->AddressOfNameOrdinals); |
| function= RVA(exports->AddressOfFunctions); |
| name = RVA(exports->AddressOfNames); |
| forward = NULL; |
| rva_start = PE_HEADER(wm->module)->OptionalHeader |
| .DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].VirtualAddress; |
| rva_end = rva_start + PE_HEADER(wm->module)->OptionalHeader |
| .DataDirectory[IMAGE_DIRECTORY_ENTRY_EXPORT].Size; |
| |
| if (HIWORD(funcName)) |
| { |
| /* first try a binary search */ |
| int min = 0, max = exports->NumberOfNames - 1; |
| while (min <= max) |
| { |
| int res, pos = (min + max) / 2; |
| ename = RVA(name[pos]); |
| if (!(res = strcmp( ename, funcName ))) |
| { |
| ordinal = ordinals[pos]; |
| goto found; |
| } |
| if (res > 0) max = pos - 1; |
| else min = pos + 1; |
| } |
| /* now try a linear search in case the names aren't sorted properly */ |
| for (i = 0; i < exports->NumberOfNames; i++) |
| { |
| ename = RVA(name[i]); |
| if (!strcmp( ename, funcName )) |
| { |
| ERR( "%s.%s required a linear search\n", wm->modname, funcName ); |
| ordinal = ordinals[i]; |
| goto found; |
| } |
| } |
| return NULL; |
| } |
| else /* find by ordinal */ |
| { |
| ordinal = LOWORD(funcName) - exports->Base; |
| if (snoop && name) /* need to find a name for it */ |
| { |
| for (i = 0; i < exports->NumberOfNames; i++) |
| if (ordinals[i] == ordinal) |
| { |
| ename = RVA(name[i]); |
| break; |
| } |
| } |
| } |
| |
| found: |
| if (ordinal >= exports->NumberOfFunctions) |
| { |
| TRACE(" ordinal %ld out of range!\n", ordinal + exports->Base ); |
| return NULL; |
| } |
| addr = function[ordinal]; |
| if (!addr) return NULL; |
| if ((addr < rva_start) || (addr >= rva_end)) |
| { |
| FARPROC proc = RVA(addr); |
| if (snoop) |
| { |
| if (!ename) ename = "@"; |
| proc = SNOOP_GetProcAddress(wm->module,ename,ordinal,proc); |
| } |
| return proc; |
| } |
| else /* forward entry point */ |
| { |
| WINE_MODREF *wm_fw; |
| FARPROC proc; |
| char *forward = RVA(addr); |
| char module[256]; |
| char *end = strchr(forward, '.'); |
| |
| if (!end) return NULL; |
| if (end - forward >= sizeof(module)) return NULL; |
| memcpy( module, forward, end - forward ); |
| module[end-forward] = 0; |
| if (!(wm_fw = MODULE_FindModule( module ))) |
| { |
| ERR("module not found for forward '%s' used by '%s'\n", forward, wm->modname ); |
| return NULL; |
| } |
| if (!(proc = MODULE_GetProcAddress( wm_fw->module, end + 1, snoop ))) |
| ERR("function not found for forward '%s' used by '%s'. If you are using builtin '%s', try using the native one instead.\n", forward, wm->modname, wm->modname ); |
| return proc; |
| } |
| } |
| |
| DWORD fixup_imports( WINE_MODREF *wm ) |
| { |
| IMAGE_IMPORT_DESCRIPTOR *pe_imp; |
| unsigned int load_addr = wm->module; |
| int i,characteristics_detection=1; |
| IMAGE_IMPORT_DESCRIPTOR *imports = get_imports(wm->module); |
| |
| /* first, count the number of imported non-internal modules */ |
| pe_imp = imports; |
| if (!pe_imp) return 0; |
| |
| /* OK, now dump the import list */ |
| TRACE("Dumping imports list\n"); |
| |
| /* We assume that we have at least one import with !0 characteristics and |
| * detect broken imports with all characteristics 0 (notably Borland) and |
| * switch the detection off for them. |
| */ |
| for (i = 0; pe_imp->Name ; pe_imp++) { |
| if (!i && !pe_imp->u.Characteristics) |
| characteristics_detection = 0; |
| if (characteristics_detection && !pe_imp->u.Characteristics) |
| break; |
| i++; |
| } |
| if (!i) return 0; /* no imports */ |
| |
| /* Allocate module dependency list */ |
| wm->nDeps = i; |
| wm->deps = HeapAlloc( GetProcessHeap(), 0, i*sizeof(WINE_MODREF *) ); |
| |
| /* load the imported modules. They are automatically |
| * added to the modref list of the process. |
| */ |
| |
| for (i = 0, pe_imp = imports; pe_imp->Name ; pe_imp++) { |
| WINE_MODREF *wmImp; |
| IMAGE_IMPORT_BY_NAME *pe_name; |
| PIMAGE_THUNK_DATA import_list,thunk_list; |
| char *name = (char *) RVA(pe_imp->Name); |
| |
| if (characteristics_detection && !pe_imp->u.Characteristics) |
| break; |
| |
| wmImp = MODULE_LoadLibraryExA( name, 0, 0 ); |
| if (!wmImp) { |
| ERR_(module)("Module (file) %s needed by %s not found\n", name, wm->filename); |
| return 1; |
| } |
| wm->deps[i++] = wmImp; |
| |
| /* FIXME: forwarder entries ... */ |
| |
| if (pe_imp->u.OriginalFirstThunk != 0) { /* original MS style */ |
| TRACE("Microsoft style imports used\n"); |
| import_list =(PIMAGE_THUNK_DATA) RVA(pe_imp->u.OriginalFirstThunk); |
| thunk_list = (PIMAGE_THUNK_DATA) RVA(pe_imp->FirstThunk); |
| |
| while (import_list->u1.Ordinal) { |
| if (IMAGE_SNAP_BY_ORDINAL(import_list->u1.Ordinal)) { |
| int ordinal = IMAGE_ORDINAL(import_list->u1.Ordinal); |
| |
| TRACE("--- Ordinal %s,%d\n", name, ordinal); |
| thunk_list->u1.Function=(PDWORD)MODULE_GetProcAddress( |
| wmImp->module, (LPCSTR)ordinal, TRUE |
| ); |
| if (!thunk_list->u1.Function) { |
| ERR("No implementation for %s.%d imported from %s, setting to 0xdeadbeef\n", |
| name, ordinal, wm->filename ); |
| thunk_list->u1.Function = (PDWORD)0xdeadbeef; |
| } |
| } else { /* import by name */ |
| pe_name = (PIMAGE_IMPORT_BY_NAME)RVA(import_list->u1.AddressOfData); |
| TRACE("--- %s %s.%d\n", pe_name->Name, name, pe_name->Hint); |
| thunk_list->u1.Function=(PDWORD)MODULE_GetProcAddress( |
| wmImp->module, pe_name->Name, TRUE |
| ); |
| if (!thunk_list->u1.Function) { |
| ERR("No implementation for %s.%d(%s) imported from %s, setting to 0xdeadbeef\n", |
| name,pe_name->Hint,pe_name->Name,wm->filename); |
| thunk_list->u1.Function = (PDWORD)0xdeadbeef; |
| } |
| } |
| import_list++; |
| thunk_list++; |
| } |
| } else { /* Borland style */ |
| TRACE("Borland style imports used\n"); |
| thunk_list = (PIMAGE_THUNK_DATA) RVA(pe_imp->FirstThunk); |
| while (thunk_list->u1.Ordinal) { |
| if (IMAGE_SNAP_BY_ORDINAL(thunk_list->u1.Ordinal)) { |
| /* not sure about this branch, but it seems to work */ |
| int ordinal = IMAGE_ORDINAL(thunk_list->u1.Ordinal); |
| |
| TRACE("--- Ordinal %s.%d\n",name,ordinal); |
| thunk_list->u1.Function=(PDWORD)MODULE_GetProcAddress( |
| wmImp->module, (LPCSTR) ordinal, TRUE |
| ); |
| if (!thunk_list->u1.Function) { |
| ERR("No implementation for %s.%d imported from %s, setting to 0xdeadbeef\n", |
| name,ordinal, wm->filename); |
| thunk_list->u1.Function = (PDWORD)0xdeadbeef; |
| } |
| } else { |
| pe_name=(PIMAGE_IMPORT_BY_NAME) RVA(thunk_list->u1.AddressOfData); |
| TRACE("--- %s %s.%d\n", |
| pe_name->Name,name,pe_name->Hint); |
| thunk_list->u1.Function=(PDWORD)MODULE_GetProcAddress( |
| wmImp->module, pe_name->Name, TRUE |
| ); |
| if (!thunk_list->u1.Function) { |
| ERR("No implementation for %s.%d(%s) imported from %s, setting to 0xdeadbeef\n", |
| name, pe_name->Hint, pe_name->Name, wm->filename); |
| thunk_list->u1.Function = (PDWORD)0xdeadbeef; |
| } |
| } |
| thunk_list++; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| /*********************************************************************** |
| * do_relocations |
| * |
| * Apply the relocations to a mapped PE image |
| */ |
| static int do_relocations( char *base, const IMAGE_NT_HEADERS *nt, const char *filename ) |
| { |
| const IMAGE_DATA_DIRECTORY *dir; |
| const IMAGE_BASE_RELOCATION *rel; |
| int delta = base - (char *)nt->OptionalHeader.ImageBase; |
| |
| dir = &nt->OptionalHeader.DataDirectory[IMAGE_DIRECTORY_ENTRY_BASERELOC]; |
| rel = (IMAGE_BASE_RELOCATION *)(base + dir->VirtualAddress); |
| |
| WARN("Info: base relocations needed for %s\n", filename); |
| if (!dir->VirtualAddress || !dir->Size) |
| { |
| if (nt->OptionalHeader.ImageBase == 0x400000) |
| ERR("Standard load address for a Win32 program not available - patched kernel ?\n"); |
| ERR( "FATAL: Need to relocate %s, but no relocation records present (%s). Try to run that file directly !\n", |
| filename, |
| (nt->FileHeader.Characteristics&IMAGE_FILE_RELOCS_STRIPPED)? |
| "stripped during link" : "unknown reason" ); |
| return 0; |
| } |
| |
| /* FIXME: If we need to relocate a system DLL (base > 2GB) we should |
| * really make sure that the *new* base address is also > 2GB. |
| * Some DLLs really check the MSB of the module handle :-/ |
| */ |
| if ((nt->OptionalHeader.ImageBase & 0x80000000) && !((DWORD)base & 0x80000000)) |
| ERR( "Forced to relocate system DLL (base > 2GB). This is not good.\n" ); |
| |
| for ( ; ((char *)rel < base + dir->VirtualAddress + dir->Size) && rel->VirtualAddress; |
| rel = (IMAGE_BASE_RELOCATION*)((char*)rel + rel->SizeOfBlock)) |
| { |
| char *page = base + rel->VirtualAddress; |
| int i, count = (rel->SizeOfBlock - 8) / sizeof(rel->TypeOffset); |
| |
| if (!count) continue; |
| |
| /* sanity checks */ |
| if ((char *)rel + rel->SizeOfBlock > base + dir->VirtualAddress + dir->Size || |
| page > base + nt->OptionalHeader.SizeOfImage) |
| { |
| ERR_(module)("invalid relocation %p,%lx,%ld at %p,%lx,%lx\n", |
| rel, rel->VirtualAddress, rel->SizeOfBlock, |
| base, dir->VirtualAddress, dir->Size ); |
| return 0; |
| } |
| |
| TRACE_(module)("%ld relocations for page %lx\n", rel->SizeOfBlock, rel->VirtualAddress); |
| |
| /* patching in reverse order */ |
| for (i = 0 ; i < count; i++) |
| { |
| int offset = rel->TypeOffset[i] & 0xFFF; |
| int type = rel->TypeOffset[i] >> 12; |
| switch(type) |
| { |
| case IMAGE_REL_BASED_ABSOLUTE: |
| break; |
| case IMAGE_REL_BASED_HIGH: |
| *(short*)(page+offset) += HIWORD(delta); |
| break; |
| case IMAGE_REL_BASED_LOW: |
| *(short*)(page+offset) += LOWORD(delta); |
| break; |
| case IMAGE_REL_BASED_HIGHLOW: |
| *(int*)(page+offset) += delta; |
| /* FIXME: if this is an exported address, fire up enhanced logic */ |
| break; |
| default: |
| FIXME_(module)("Unknown/unsupported fixup type %d.\n", type); |
| break; |
| } |
| } |
| } |
| return 1; |
| } |
| |
| |
| /********************************************************************** |
| * PE_LoadImage |
| * Load one PE format DLL/EXE into memory |
| * |
| * Unluckily we can't just mmap the sections where we want them, for |
| * (at least) Linux does only support offsets which are page-aligned. |
| * |
| * BUT we have to map the whole image anyway, for Win32 programs sometimes |
| * want to access them. (HMODULE32 point to the start of it) |
| */ |
| HMODULE PE_LoadImage( HANDLE hFile, LPCSTR filename, DWORD flags ) |
| { |
| IMAGE_NT_HEADERS *nt; |
| HMODULE hModule; |
| HANDLE mapping; |
| void *base; |
| |
| TRACE_(module)( "loading %s\n", filename ); |
| |
| mapping = CreateFileMappingA( hFile, NULL, SEC_IMAGE, 0, 0, NULL ); |
| if (!mapping) return 0; |
| base = MapViewOfFile( mapping, FILE_MAP_READ, 0, 0, 0 ); |
| CloseHandle( mapping ); |
| if (!base) return 0; |
| |
| hModule = (HMODULE)base; |
| if (flags & LOAD_LIBRARY_AS_DATAFILE) return hModule; /* nothing else to do */ |
| |
| /* perform base relocation, if necessary */ |
| |
| nt = PE_HEADER( hModule ); |
| if (hModule != nt->OptionalHeader.ImageBase) |
| { |
| if (!do_relocations( base, nt, filename )) |
| { |
| UnmapViewOfFile( base ); |
| SetLastError( ERROR_BAD_EXE_FORMAT ); |
| return 0; |
| } |
| } |
| |
| /* virus check */ |
| |
| if (nt->OptionalHeader.AddressOfEntryPoint) |
| { |
| int i; |
| IMAGE_SECTION_HEADER *sec = (IMAGE_SECTION_HEADER*)((char*)&nt->OptionalHeader + |
| nt->FileHeader.SizeOfOptionalHeader); |
| for (i = 0; i < nt->FileHeader.NumberOfSections; i++, sec++) |
| { |
| if (nt->OptionalHeader.AddressOfEntryPoint < sec->VirtualAddress) |
| continue; |
| if (nt->OptionalHeader.AddressOfEntryPoint < sec->VirtualAddress+sec->SizeOfRawData) |
| break; |
| } |
| if (i == nt->FileHeader.NumberOfSections) |
| MESSAGE("VIRUS WARNING: PE module has an invalid entrypoint (0x%08lx) " |
| "outside all sections (possibly infected by Tchernobyl/SpaceFiller virus)!\n", |
| nt->OptionalHeader.AddressOfEntryPoint ); |
| } |
| |
| return hModule; |
| } |
| |
| /********************************************************************** |
| * PE_CreateModule |
| * |
| * Create WINE_MODREF structure for loaded HMODULE32, link it into |
| * process modref_list, and fixup all imports. |
| * |
| * Note: hModule must point to a correctly allocated PE image, |
| * with base relocations applied; the 16-bit dummy module |
| * associated to hModule must already exist. |
| * |
| * Note: This routine must always be called in the context of the |
| * process that is to own the module to be created. |
| * |
| * Note: Assumes that the process critical section is held |
| */ |
| WINE_MODREF *PE_CreateModule( HMODULE hModule, LPCSTR filename, DWORD flags, |
| HANDLE hFile, BOOL builtin ) |
| { |
| DWORD load_addr = (DWORD)hModule; /* for RVA */ |
| IMAGE_NT_HEADERS *nt = PE_HEADER(hModule); |
| IMAGE_DATA_DIRECTORY *dir; |
| IMAGE_EXPORT_DIRECTORY *pe_export = NULL; |
| WINE_MODREF *wm; |
| HMODULE16 hModule16; |
| |
| /* Retrieve DataDirectory entries */ |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_EXPORT; |
| if (dir->Size) |
| pe_export = (PIMAGE_EXPORT_DIRECTORY)RVA(dir->VirtualAddress); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_EXCEPTION; |
| if (dir->Size) FIXME("Exception directory ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_SECURITY; |
| if (dir->Size) FIXME("Security directory ignored\n" ); |
| |
| /* IMAGE_DIRECTORY_ENTRY_BASERELOC handled in PE_LoadImage */ |
| /* IMAGE_DIRECTORY_ENTRY_DEBUG handled by debugger */ |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_GLOBALPTR; |
| if (dir->Size) FIXME("Global Pointer (MIPS) ignored\n" ); |
| |
| /* IMAGE_DIRECTORY_ENTRY_TLS handled in PE_TlsInit */ |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_LOAD_CONFIG; |
| if (dir->Size) FIXME("Load Configuration directory ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_BOUND_IMPORT; |
| if (dir->Size) TRACE("Bound Import directory ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_IAT; |
| if (dir->Size) TRACE("Import Address Table directory ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_DELAY_IMPORT; |
| if (dir->Size) |
| { |
| TRACE("Delayed import, stub calls LoadLibrary\n" ); |
| /* |
| * Nothing to do here. |
| */ |
| |
| #ifdef ImgDelayDescr |
| /* |
| * This code is useful to observe what the heck is going on. |
| */ |
| { |
| ImgDelayDescr *pe_delay = NULL; |
| pe_delay = (PImgDelayDescr)RVA(dir->VirtualAddress); |
| TRACE_(delayhlp)("pe_delay->grAttrs = %08x\n", pe_delay->grAttrs); |
| TRACE_(delayhlp)("pe_delay->szName = %s\n", pe_delay->szName); |
| TRACE_(delayhlp)("pe_delay->phmod = %08x\n", pe_delay->phmod); |
| TRACE_(delayhlp)("pe_delay->pIAT = %08x\n", pe_delay->pIAT); |
| TRACE_(delayhlp)("pe_delay->pINT = %08x\n", pe_delay->pINT); |
| TRACE_(delayhlp)("pe_delay->pBoundIAT = %08x\n", pe_delay->pBoundIAT); |
| TRACE_(delayhlp)("pe_delay->pUnloadIAT = %08x\n", pe_delay->pUnloadIAT); |
| TRACE_(delayhlp)("pe_delay->dwTimeStamp = %08x\n", pe_delay->dwTimeStamp); |
| } |
| #endif /* ImgDelayDescr */ |
| } |
| |
| dir = nt->OptionalHeader.DataDirectory+IMAGE_DIRECTORY_ENTRY_COM_DESCRIPTOR; |
| if (dir->Size) FIXME("Unknown directory 14 ignored\n" ); |
| |
| dir = nt->OptionalHeader.DataDirectory+15; |
| if (dir->Size) FIXME("Unknown directory 15 ignored\n" ); |
| |
| /* Create 16-bit dummy module */ |
| |
| if ((hModule16 = MODULE_CreateDummyModule( filename, hModule )) < 32) |
| { |
| SetLastError( (DWORD)hModule16 ); /* This should give the correct error */ |
| return NULL; |
| } |
| |
| /* Allocate and fill WINE_MODREF */ |
| |
| if (!(wm = MODULE_AllocModRef( hModule, filename ))) |
| { |
| FreeLibrary16( hModule16 ); |
| return NULL; |
| } |
| wm->hDummyMod = hModule16; |
| |
| if ( builtin ) |
| { |
| NE_MODULE *pModule = (NE_MODULE *)GlobalLock16( hModule16 ); |
| pModule->flags |= NE_FFLAGS_BUILTIN; |
| wm->flags |= WINE_MODREF_INTERNAL; |
| } |
| else if ( flags & DONT_RESOLVE_DLL_REFERENCES ) |
| wm->flags |= WINE_MODREF_DONT_RESOLVE_REFS; |
| |
| wm->find_export = PE_FindExportedFunction; |
| |
| /* Dump Exports */ |
| |
| if ( pe_export ) |
| dump_exports( hModule ); |
| |
| /* Fixup Imports */ |
| |
| if (!(wm->flags & WINE_MODREF_DONT_RESOLVE_REFS) && fixup_imports( wm )) |
| { |
| /* remove entry from modref chain */ |
| |
| if ( !wm->prev ) |
| MODULE_modref_list = wm->next; |
| else |
| wm->prev->next = wm->next; |
| |
| if ( wm->next ) wm->next->prev = wm->prev; |
| wm->next = wm->prev = NULL; |
| |
| /* FIXME: there are several more dangling references |
| * left. Including dlls loaded by this dll before the |
| * failed one. Unrolling is rather difficult with the |
| * current structure and we can leave it them lying |
| * around with no problems, so we don't care. |
| * As these might reference our wm, we don't free it. |
| */ |
| return NULL; |
| } |
| |
| if (pe_export) |
| SNOOP_RegisterDLL( hModule, wm->modname, pe_export->Base, pe_export->NumberOfFunctions ); |
| |
| /* Send DLL load event */ |
| /* we don't need to send a dll event for the main exe */ |
| |
| if (nt->FileHeader.Characteristics & IMAGE_FILE_DLL) |
| { |
| SERVER_START_REQ( load_dll ) |
| { |
| req->handle = hFile; |
| req->base = (void *)hModule; |
| req->dbg_offset = nt->FileHeader.PointerToSymbolTable; |
| req->dbg_size = nt->FileHeader.NumberOfSymbols; |
| req->name = &wm->filename; |
| SERVER_CALL(); |
| } |
| SERVER_END_REQ; |
| } |
| |
| return wm; |
| } |
| |
| /****************************************************************************** |
| * The PE Library Loader frontend. |
| * FIXME: handle the flags. |
| */ |
| WINE_MODREF *PE_LoadLibraryExA (LPCSTR name, DWORD flags) |
| { |
| HMODULE hModule32; |
| WINE_MODREF *wm; |
| HANDLE hFile; |
| |
| hFile = CreateFileA( name, GENERIC_READ, FILE_SHARE_READ, |
| NULL, OPEN_EXISTING, 0, 0 ); |
| if ( hFile == INVALID_HANDLE_VALUE ) return NULL; |
| |
| /* Load PE module */ |
| hModule32 = PE_LoadImage( hFile, name, flags ); |
| if (!hModule32) |
| { |
| CloseHandle( hFile ); |
| return NULL; |
| } |
| |
| /* Create 32-bit MODREF */ |
| if ( !(wm = PE_CreateModule( hModule32, name, flags, hFile, FALSE )) ) |
| { |
| ERR( "can't load %s\n", name ); |
| CloseHandle( hFile ); |
| SetLastError( ERROR_OUTOFMEMORY ); |
| return NULL; |
| } |
| |
| CloseHandle( hFile ); |
| return wm; |
| } |
| |
| |
| /* Called if the library is loaded or freed. |
| * NOTE: if a thread attaches a DLL, the current thread will only do |
| * DLL_PROCESS_ATTACH. Only new created threads do DLL_THREAD_ATTACH |
| * (SDK) |
| */ |
| typedef DWORD CALLBACK(*DLLENTRYPROC)(HMODULE,DWORD,LPVOID); |
| |
| BOOL PE_InitDLL( HMODULE module, DWORD type, LPVOID lpReserved ) |
| { |
| BOOL retv = TRUE; |
| IMAGE_NT_HEADERS *nt = PE_HEADER(module); |
| |
| /* Is this a library? And has it got an entrypoint? */ |
| if ((nt->FileHeader.Characteristics & IMAGE_FILE_DLL) && |
| (nt->OptionalHeader.AddressOfEntryPoint)) |
| { |
| DLLENTRYPROC entry = (void*)((char*)module + nt->OptionalHeader.AddressOfEntryPoint); |
| if (TRACE_ON(relay)) |
| DPRINTF("%08lx:Call PE DLL (proc=%p,module=%08x,type=%ld,res=%p)\n", |
| GetCurrentThreadId(), entry, module, type, lpReserved ); |
| retv = entry( module, type, lpReserved ); |
| if (TRACE_ON(relay)) |
| DPRINTF("%08lx:Ret PE DLL (proc=%p,module=%08x,type=%ld,res=%p) retval=%x\n", |
| GetCurrentThreadId(), entry, module, type, lpReserved, retv ); |
| } |
| |
| return retv; |
| } |
| |
| /************************************************************************ |
| * PE_InitTls (internal) |
| * |
| * If included, initialises the thread local storages of modules. |
| * Pointers in those structs are not RVAs but real pointers which have been |
| * relocated by do_relocations() already. |
| */ |
| static LPVOID |
| _fixup_address(PIMAGE_OPTIONAL_HEADER opt,int delta,LPVOID addr) { |
| if ( ((DWORD)addr>opt->ImageBase) && |
| ((DWORD)addr<opt->ImageBase+opt->SizeOfImage) |
| ) |
| /* the address has not been relocated! */ |
| return (LPVOID)(((DWORD)addr)+delta); |
| else |
| /* the address has been relocated already */ |
| return addr; |
| } |
| void PE_InitTls( void ) |
| { |
| WINE_MODREF *wm; |
| IMAGE_NT_HEADERS *peh; |
| DWORD size,datasize; |
| LPVOID mem; |
| PIMAGE_TLS_DIRECTORY pdir; |
| int delta; |
| |
| for (wm = MODULE_modref_list;wm;wm=wm->next) { |
| peh = PE_HEADER(wm->module); |
| delta = wm->module - peh->OptionalHeader.ImageBase; |
| if (!peh->OptionalHeader.DataDirectory[IMAGE_FILE_THREAD_LOCAL_STORAGE].VirtualAddress) |
| continue; |
| pdir = (LPVOID)(wm->module + peh->OptionalHeader. |
| DataDirectory[IMAGE_FILE_THREAD_LOCAL_STORAGE].VirtualAddress); |
| |
| |
| if ( wm->tlsindex == -1 ) { |
| LPDWORD xaddr; |
| wm->tlsindex = TlsAlloc(); |
| xaddr = _fixup_address(&(peh->OptionalHeader),delta, |
| pdir->AddressOfIndex |
| ); |
| *xaddr=wm->tlsindex; |
| } |
| datasize= pdir->EndAddressOfRawData-pdir->StartAddressOfRawData; |
| size = datasize + pdir->SizeOfZeroFill; |
| mem=VirtualAlloc(0,size,MEM_RESERVE|MEM_COMMIT,PAGE_READWRITE); |
| memcpy(mem,_fixup_address(&(peh->OptionalHeader),delta,(LPVOID)pdir->StartAddressOfRawData),datasize); |
| if (pdir->AddressOfCallBacks) { |
| PIMAGE_TLS_CALLBACK *cbs; |
| |
| cbs = _fixup_address(&(peh->OptionalHeader),delta,pdir->AddressOfCallBacks); |
| if (*cbs) |
| FIXME("TLS Callbacks aren't going to be called\n"); |
| } |
| |
| TlsSetValue( wm->tlsindex, mem ); |
| } |
| } |
| |
