| /* |
| * Copyright 2014 Henri Verbeet for CodeWeavers |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA |
| */ |
| |
| #define COBJMACROS |
| #include <math.h> |
| #include "d2d1.h" |
| #include "wincrypt.h" |
| #include "wine/test.h" |
| #include "initguid.h" |
| #include "dwrite.h" |
| #include "wincodec.h" |
| |
| struct figure |
| { |
| unsigned int *spans; |
| unsigned int spans_size; |
| unsigned int span_count; |
| }; |
| |
| static void set_point(D2D1_POINT_2F *point, float x, float y) |
| { |
| point->x = x; |
| point->y = y; |
| } |
| |
| static void set_quadratic(D2D1_QUADRATIC_BEZIER_SEGMENT *quadratic, float x1, float y1, float x2, float y2) |
| { |
| quadratic->point1.x = x1; |
| quadratic->point1.y = y1; |
| quadratic->point2.x = x2; |
| quadratic->point2.y = y2; |
| } |
| |
| static void set_rect(D2D1_RECT_F *rect, float left, float top, float right, float bottom) |
| { |
| rect->left = left; |
| rect->top = top; |
| rect->right = right; |
| rect->bottom = bottom; |
| } |
| |
| static void set_rect_u(D2D1_RECT_U *rect, UINT32 left, UINT32 top, UINT32 right, UINT32 bottom) |
| { |
| rect->left = left; |
| rect->top = top; |
| rect->right = right; |
| rect->bottom = bottom; |
| } |
| |
| static void set_color(D2D1_COLOR_F *color, float r, float g, float b, float a) |
| { |
| color->r = r; |
| color->g = g; |
| color->b = b; |
| color->a = a; |
| } |
| |
| static void set_size_u(D2D1_SIZE_U *size, unsigned int w, unsigned int h) |
| { |
| size->width = w; |
| size->height = h; |
| } |
| |
| static void set_matrix_identity(D2D1_MATRIX_3X2_F *matrix) |
| { |
| matrix->_11 = 1.0f; |
| matrix->_12 = 0.0f; |
| matrix->_21 = 0.0f; |
| matrix->_22 = 1.0f; |
| matrix->_31 = 0.0f; |
| matrix->_32 = 0.0f; |
| } |
| |
| static void rotate_matrix(D2D1_MATRIX_3X2_F *matrix, float theta) |
| { |
| float sin_theta, cos_theta, tmp_11, tmp_12; |
| |
| sin_theta = sinf(theta); |
| cos_theta = cosf(theta); |
| tmp_11 = matrix->_11; |
| tmp_12 = matrix->_12; |
| |
| matrix->_11 = cos_theta * tmp_11 + sin_theta * matrix->_21; |
| matrix->_12 = cos_theta * tmp_12 + sin_theta * matrix->_22; |
| matrix->_21 = -sin_theta * tmp_11 + cos_theta * matrix->_21; |
| matrix->_22 = -sin_theta * tmp_12 + cos_theta * matrix->_22; |
| } |
| |
| static void scale_matrix(D2D1_MATRIX_3X2_F *matrix, float x, float y) |
| { |
| matrix->_11 *= x; |
| matrix->_12 *= x; |
| matrix->_21 *= y; |
| matrix->_22 *= y; |
| } |
| |
| static void translate_matrix(D2D1_MATRIX_3X2_F *matrix, float x, float y) |
| { |
| matrix->_31 += x * matrix->_11 + y * matrix->_21; |
| matrix->_32 += x * matrix->_12 + y * matrix->_22; |
| } |
| |
| static BOOL compare_sha1(void *data, unsigned int pitch, unsigned int bpp, |
| unsigned int w, unsigned int h, const char *ref_sha1) |
| { |
| static const char hex_chars[] = "0123456789abcdef"; |
| HCRYPTPROV provider; |
| BYTE hash_data[20]; |
| HCRYPTHASH hash; |
| unsigned int i; |
| char sha1[41]; |
| BOOL ret; |
| |
| ret = CryptAcquireContextW(&provider, NULL, NULL, PROV_RSA_FULL, CRYPT_VERIFYCONTEXT); |
| ok(ret, "Failed to acquire crypt context.\n"); |
| ret = CryptCreateHash(provider, CALG_SHA1, 0, 0, &hash); |
| ok(ret, "Failed to create hash.\n"); |
| |
| for (i = 0; i < h; ++i) |
| { |
| if (!(ret = CryptHashData(hash, (BYTE *)data + pitch * i, w * bpp, 0))) |
| break; |
| } |
| ok(ret, "Failed to hash data.\n"); |
| |
| i = sizeof(hash_data); |
| ret = CryptGetHashParam(hash, HP_HASHVAL, hash_data, &i, 0); |
| ok(ret, "Failed to get hash value.\n"); |
| ok(i == sizeof(hash_data), "Got unexpected hash size %u.\n", i); |
| |
| ret = CryptDestroyHash(hash); |
| ok(ret, "Failed to destroy hash.\n"); |
| ret = CryptReleaseContext(provider, 0); |
| ok(ret, "Failed to release crypt context.\n"); |
| |
| for (i = 0; i < 20; ++i) |
| { |
| sha1[i * 2] = hex_chars[hash_data[i] >> 4]; |
| sha1[i * 2 + 1] = hex_chars[hash_data[i] & 0xf]; |
| } |
| sha1[40] = 0; |
| |
| return !strcmp(ref_sha1, (char *)sha1); |
| } |
| |
| static BOOL compare_surface(IDXGISurface *surface, const char *ref_sha1) |
| { |
| D3D10_MAPPED_TEXTURE2D mapped_texture; |
| D3D10_TEXTURE2D_DESC texture_desc; |
| DXGI_SURFACE_DESC surface_desc; |
| ID3D10Resource *src_resource; |
| ID3D10Texture2D *texture; |
| ID3D10Device *device; |
| HRESULT hr; |
| BOOL ret; |
| |
| hr = IDXGISurface_GetDevice(surface, &IID_ID3D10Device, (void **)&device); |
| ok(SUCCEEDED(hr), "Failed to get device, hr %#x.\n", hr); |
| hr = IDXGISurface_QueryInterface(surface, &IID_ID3D10Resource, (void **)&src_resource); |
| ok(SUCCEEDED(hr), "Failed to query resource interface, hr %#x.\n", hr); |
| |
| hr = IDXGISurface_GetDesc(surface, &surface_desc); |
| ok(SUCCEEDED(hr), "Failed to get surface desc, hr %#x.\n", hr); |
| texture_desc.Width = surface_desc.Width; |
| texture_desc.Height = surface_desc.Height; |
| texture_desc.MipLevels = 1; |
| texture_desc.ArraySize = 1; |
| texture_desc.Format = surface_desc.Format; |
| texture_desc.SampleDesc = surface_desc.SampleDesc; |
| texture_desc.Usage = D3D10_USAGE_STAGING; |
| texture_desc.BindFlags = 0; |
| texture_desc.CPUAccessFlags = D3D10_CPU_ACCESS_READ; |
| texture_desc.MiscFlags = 0; |
| hr = ID3D10Device_CreateTexture2D(device, &texture_desc, NULL, &texture); |
| ok(SUCCEEDED(hr), "Failed to create texture, hr %#x.\n", hr); |
| |
| ID3D10Device_CopyResource(device, (ID3D10Resource *)texture, src_resource); |
| hr = ID3D10Texture2D_Map(texture, 0, D3D10_MAP_READ, 0, &mapped_texture); |
| ok(SUCCEEDED(hr), "Failed to map texture, hr %#x.\n", hr); |
| ret = compare_sha1(mapped_texture.pData, mapped_texture.RowPitch, 4, |
| texture_desc.Width, texture_desc.Height, ref_sha1); |
| ID3D10Texture2D_Unmap(texture, 0); |
| |
| ID3D10Texture2D_Release(texture); |
| ID3D10Resource_Release(src_resource); |
| ID3D10Device_Release(device); |
| |
| return ret; |
| } |
| |
| static void serialize_figure(struct figure *figure) |
| { |
| static const char lookup[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"; |
| unsigned int i, j, k, span; |
| char output[76]; |
| char t[3]; |
| char *p; |
| |
| for (i = 0, j = 0, k = 0, p = output; i < figure->span_count; ++i) |
| { |
| span = figure->spans[i]; |
| while (span) |
| { |
| t[j] = span & 0x7f; |
| if (span > 0x7f) |
| t[j] |= 0x80; |
| span >>= 7; |
| if (++j == 3) |
| { |
| p[0] = lookup[(t[0] & 0xfc) >> 2]; |
| p[1] = lookup[((t[0] & 0x03) << 4) | ((t[1] & 0xf0) >> 4)]; |
| p[2] = lookup[((t[1] & 0x0f) << 2) | ((t[2] & 0xc0) >> 6)]; |
| p[3] = lookup[t[2] & 0x3f]; |
| p += 4; |
| if (++k == 19) |
| { |
| trace("%.76s\n", output); |
| p = output; |
| k = 0; |
| } |
| j = 0; |
| } |
| } |
| } |
| if (j) |
| { |
| for (i = j; i < 3; ++i) |
| t[i] = 0; |
| p[0] = lookup[(t[0] & 0xfc) >> 2]; |
| p[1] = lookup[((t[0] & 0x03) << 4) | ((t[1] & 0xf0) >> 4)]; |
| p[2] = lookup[((t[1] & 0x0f) << 2) | ((t[2] & 0xc0) >> 6)]; |
| p[3] = lookup[t[2] & 0x3f]; |
| ++k; |
| } |
| if (k) |
| trace("%.*s\n", k * 4, output); |
| } |
| |
| static void figure_add_span(struct figure *figure, unsigned int span) |
| { |
| if (figure->span_count == figure->spans_size) |
| { |
| figure->spans_size *= 2; |
| figure->spans = HeapReAlloc(GetProcessHeap(), 0, figure->spans, |
| figure->spans_size * sizeof(*figure->spans)); |
| } |
| |
| figure->spans[figure->span_count++] = span; |
| } |
| |
| static void deserialize_span(struct figure *figure, unsigned int *current, unsigned int *shift, unsigned int c) |
| { |
| *current |= (c & 0x7f) << *shift; |
| if (c & 0x80) |
| { |
| *shift += 7; |
| return; |
| } |
| |
| if (*current) |
| figure_add_span(figure, *current); |
| *current = 0; |
| *shift = 0; |
| } |
| |
| static void deserialize_figure(struct figure *figure, const BYTE *s) |
| { |
| static const BYTE lookup[] = |
| { |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3e, 0xff, 0xff, 0xff, 0x3f, |
| 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, |
| 0x0f, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0xff, 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, |
| 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, 0x30, 0x31, 0x32, 0x33, 0xff, 0xff, 0xff, 0xff, 0xff, |
| }; |
| unsigned int current = 0, shift = 0; |
| const BYTE *ptr; |
| BYTE x, y; |
| |
| figure->span_count = 0; |
| figure->spans_size = 64; |
| figure->spans = HeapAlloc(GetProcessHeap(), 0, figure->spans_size * sizeof(*figure->spans)); |
| |
| for (ptr = s; *ptr; ptr += 4) |
| { |
| x = lookup[ptr[0]]; |
| y = lookup[ptr[1]]; |
| deserialize_span(figure, ¤t, &shift, ((x & 0x3f) << 2) | ((y & 0x3f) >> 4)); |
| x = lookup[ptr[2]]; |
| deserialize_span(figure, ¤t, &shift, ((y & 0x0f) << 4) | ((x & 0x3f) >> 2)); |
| y = lookup[ptr[3]]; |
| deserialize_span(figure, ¤t, &shift, ((x & 0x03) << 6) | (y & 0x3f)); |
| } |
| } |
| |
| static BOOL compare_figure(IDXGISurface *surface, unsigned int x, unsigned int y, |
| unsigned int w, unsigned int h, DWORD prev, unsigned int max_diff, const char *ref) |
| { |
| D3D10_MAPPED_TEXTURE2D mapped_texture; |
| D3D10_TEXTURE2D_DESC texture_desc; |
| struct figure ref_figure, figure; |
| DXGI_SURFACE_DESC surface_desc; |
| unsigned int i, j, span, diff; |
| ID3D10Resource *src_resource; |
| ID3D10Texture2D *texture; |
| ID3D10Device *device; |
| HRESULT hr; |
| |
| hr = IDXGISurface_GetDevice(surface, &IID_ID3D10Device, (void **)&device); |
| ok(SUCCEEDED(hr), "Failed to get device, hr %#x.\n", hr); |
| hr = IDXGISurface_QueryInterface(surface, &IID_ID3D10Resource, (void **)&src_resource); |
| ok(SUCCEEDED(hr), "Failed to query resource interface, hr %#x.\n", hr); |
| |
| hr = IDXGISurface_GetDesc(surface, &surface_desc); |
| ok(SUCCEEDED(hr), "Failed to get surface desc, hr %#x.\n", hr); |
| texture_desc.Width = surface_desc.Width; |
| texture_desc.Height = surface_desc.Height; |
| texture_desc.MipLevels = 1; |
| texture_desc.ArraySize = 1; |
| texture_desc.Format = surface_desc.Format; |
| texture_desc.SampleDesc = surface_desc.SampleDesc; |
| texture_desc.Usage = D3D10_USAGE_STAGING; |
| texture_desc.BindFlags = 0; |
| texture_desc.CPUAccessFlags = D3D10_CPU_ACCESS_READ; |
| texture_desc.MiscFlags = 0; |
| hr = ID3D10Device_CreateTexture2D(device, &texture_desc, NULL, &texture); |
| ok(SUCCEEDED(hr), "Failed to create texture, hr %#x.\n", hr); |
| |
| ID3D10Device_CopyResource(device, (ID3D10Resource *)texture, src_resource); |
| hr = ID3D10Texture2D_Map(texture, 0, D3D10_MAP_READ, 0, &mapped_texture); |
| ok(SUCCEEDED(hr), "Failed to map texture, hr %#x.\n", hr); |
| |
| figure.span_count = 0; |
| figure.spans_size = 64; |
| figure.spans = HeapAlloc(GetProcessHeap(), 0, figure.spans_size * sizeof(*figure.spans)); |
| |
| for (i = 0, span = 0; i < h; ++i) |
| { |
| const DWORD *row = (DWORD *)((BYTE *)mapped_texture.pData + (y + i) * mapped_texture.RowPitch + x * 4); |
| for (j = 0; j < w; ++j, ++span) |
| { |
| if ((i || j) && prev != row[j]) |
| { |
| figure_add_span(&figure, span); |
| prev = row[j]; |
| span = 0; |
| } |
| } |
| } |
| if (span) |
| figure_add_span(&figure, span); |
| |
| deserialize_figure(&ref_figure, (BYTE *)ref); |
| span = w * h; |
| for (i = 0; i < ref_figure.span_count; ++i) |
| { |
| span -= ref_figure.spans[i]; |
| } |
| if (span) |
| figure_add_span(&ref_figure, span); |
| |
| for (i = 0, j = 0, diff = 0; i < figure.span_count && j < ref_figure.span_count;) |
| { |
| if (figure.spans[i] == ref_figure.spans[j]) |
| { |
| if ((i ^ j) & 1) |
| diff += ref_figure.spans[j]; |
| ++i; |
| ++j; |
| } |
| else if (figure.spans[i] > ref_figure.spans[j]) |
| { |
| if ((i ^ j) & 1) |
| diff += ref_figure.spans[j]; |
| figure.spans[i] -= ref_figure.spans[j]; |
| ++j; |
| } |
| else |
| { |
| if ((i ^ j) & 1) |
| diff += figure.spans[i]; |
| ref_figure.spans[j] -= figure.spans[i]; |
| ++i; |
| } |
| } |
| if (diff > max_diff) |
| serialize_figure(&figure); |
| |
| HeapFree(GetProcessHeap(), 0, ref_figure.spans); |
| HeapFree(GetProcessHeap(), 0, figure.spans); |
| ID3D10Texture2D_Unmap(texture, 0); |
| |
| ID3D10Texture2D_Release(texture); |
| ID3D10Resource_Release(src_resource); |
| ID3D10Device_Release(device); |
| |
| return diff <= max_diff; |
| } |
| |
| static ID3D10Device1 *create_device(void) |
| { |
| ID3D10Device1 *device; |
| |
| if (SUCCEEDED(D3D10CreateDevice1(NULL, D3D10_DRIVER_TYPE_HARDWARE, NULL, |
| D3D10_CREATE_DEVICE_BGRA_SUPPORT, D3D10_FEATURE_LEVEL_10_0, D3D10_1_SDK_VERSION, &device))) |
| return device; |
| if (SUCCEEDED(D3D10CreateDevice1(NULL, D3D10_DRIVER_TYPE_WARP, NULL, |
| D3D10_CREATE_DEVICE_BGRA_SUPPORT, D3D10_FEATURE_LEVEL_10_0, D3D10_1_SDK_VERSION, &device))) |
| return device; |
| if (SUCCEEDED(D3D10CreateDevice1(NULL, D3D10_DRIVER_TYPE_REFERENCE, NULL, |
| D3D10_CREATE_DEVICE_BGRA_SUPPORT, D3D10_FEATURE_LEVEL_10_0, D3D10_1_SDK_VERSION, &device))) |
| return device; |
| |
| return NULL; |
| } |
| |
| static IDXGISwapChain *create_swapchain(ID3D10Device1 *device, HWND window, BOOL windowed) |
| { |
| IDXGISwapChain *swapchain; |
| DXGI_SWAP_CHAIN_DESC desc; |
| IDXGIDevice *dxgi_device; |
| IDXGIAdapter *adapter; |
| IDXGIFactory *factory; |
| HRESULT hr; |
| |
| hr = ID3D10Device1_QueryInterface(device, &IID_IDXGIDevice, (void **)&dxgi_device); |
| ok(SUCCEEDED(hr), "Failed to get DXGI device, hr %#x.\n", hr); |
| hr = IDXGIDevice_GetAdapter(dxgi_device, &adapter); |
| ok(SUCCEEDED(hr), "Failed to get adapter, hr %#x.\n", hr); |
| IDXGIDevice_Release(dxgi_device); |
| hr = IDXGIAdapter_GetParent(adapter, &IID_IDXGIFactory, (void **)&factory); |
| ok(SUCCEEDED(hr), "Failed to get factory, hr %#x.\n", hr); |
| IDXGIAdapter_Release(adapter); |
| |
| desc.BufferDesc.Width = 640; |
| desc.BufferDesc.Height = 480; |
| desc.BufferDesc.RefreshRate.Numerator = 60; |
| desc.BufferDesc.RefreshRate.Denominator = 1; |
| desc.BufferDesc.Format = DXGI_FORMAT_B8G8R8A8_UNORM; |
| desc.BufferDesc.ScanlineOrdering = DXGI_MODE_SCANLINE_ORDER_UNSPECIFIED; |
| desc.BufferDesc.Scaling = DXGI_MODE_SCALING_UNSPECIFIED; |
| desc.SampleDesc.Count = 1; |
| desc.SampleDesc.Quality = 0; |
| desc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; |
| desc.BufferCount = 1; |
| desc.OutputWindow = window; |
| desc.Windowed = windowed; |
| desc.SwapEffect = DXGI_SWAP_EFFECT_DISCARD; |
| desc.Flags = 0; |
| |
| hr = IDXGIFactory_CreateSwapChain(factory, (IUnknown *)device, &desc, &swapchain); |
| ok(SUCCEEDED(hr), "Failed to create swapchain, hr %#x.\n", hr); |
| IDXGIFactory_Release(factory); |
| |
| return swapchain; |
| } |
| |
| static ID2D1RenderTarget *create_render_target_desc(IDXGISurface *surface, const D2D1_RENDER_TARGET_PROPERTIES *desc) |
| { |
| ID2D1RenderTarget *render_target; |
| ID2D1Factory *factory; |
| HRESULT hr; |
| |
| hr = D2D1CreateFactory(D2D1_FACTORY_TYPE_SINGLE_THREADED, &IID_ID2D1Factory, NULL, (void **)&factory); |
| ok(SUCCEEDED(hr), "Failed to create factory, hr %#x.\n", hr); |
| hr = ID2D1Factory_CreateDxgiSurfaceRenderTarget(factory, surface, desc, &render_target); |
| ok(SUCCEEDED(hr), "Failed to create render target, hr %#x.\n", hr); |
| ID2D1Factory_Release(factory); |
| |
| return render_target; |
| } |
| |
| static ID2D1RenderTarget *create_render_target(IDXGISurface *surface) |
| { |
| D2D1_RENDER_TARGET_PROPERTIES desc; |
| |
| desc.type = D2D1_RENDER_TARGET_TYPE_DEFAULT; |
| desc.pixelFormat.format = DXGI_FORMAT_UNKNOWN; |
| desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_PREMULTIPLIED; |
| desc.dpiX = 0.0f; |
| desc.dpiY = 0.0f; |
| desc.usage = D2D1_RENDER_TARGET_USAGE_NONE; |
| desc.minLevel = D2D1_FEATURE_LEVEL_DEFAULT; |
| |
| return create_render_target_desc(surface, &desc); |
| } |
| |
| static void test_clip(void) |
| { |
| IDXGISwapChain *swapchain; |
| D2D1_MATRIX_3X2_F matrix; |
| D2D1_SIZE_U pixel_size; |
| ID2D1RenderTarget *rt; |
| ID3D10Device1 *device; |
| IDXGISurface *surface; |
| D2D1_POINT_2F point; |
| D2D1_COLOR_F color; |
| float dpi_x, dpi_y; |
| D2D1_RECT_F rect; |
| D2D1_SIZE_F size; |
| HWND window; |
| HRESULT hr; |
| BOOL match; |
| static const D2D1_MATRIX_3X2_F identity = |
| { |
| 1.0f, 0.0f, |
| 0.0f, 1.0f, |
| 0.0f, 0.0f, |
| }; |
| |
| if (!(device = create_device())) |
| { |
| skip("Failed to create device, skipping tests.\n"); |
| return; |
| } |
| window = CreateWindowA("static", "d2d1_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE, |
| 0, 0, 640, 480, NULL, NULL, NULL, NULL); |
| swapchain = create_swapchain(device, window, TRUE); |
| hr = IDXGISwapChain_GetBuffer(swapchain, 0, &IID_IDXGISurface, (void **)&surface); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| rt = create_render_target(surface); |
| ok(!!rt, "Failed to create render target.\n"); |
| |
| ID2D1RenderTarget_GetDpi(rt, &dpi_x, &dpi_y); |
| ok(dpi_x == 96.0f, "Got unexpected dpi_x %.8e.\n", dpi_x); |
| ok(dpi_y == 96.0f, "Got unexpected dpi_x %.8e.\n", dpi_y); |
| size = ID2D1RenderTarget_GetSize(rt); |
| ok(size.width == 640.0f, "Got unexpected width %.8e.\n", size.width); |
| ok(size.height == 480.0f, "Got unexpected height %.8e.\n", size.height); |
| pixel_size = ID2D1RenderTarget_GetPixelSize(rt); |
| ok(pixel_size.width == 640, "Got unexpected width %u.\n", pixel_size.width); |
| ok(pixel_size.height == 480, "Got unexpected height %u.\n", pixel_size.height); |
| |
| ID2D1RenderTarget_GetTransform(rt, &matrix); |
| ok(!memcmp(&matrix, &identity, sizeof(matrix)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| matrix._11, matrix._12, matrix._21, matrix._22, matrix._31, matrix._32); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| |
| set_color(&color, 1.0f, 1.0f, 0.0f, 1.0f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| |
| ID2D1RenderTarget_SetDpi(rt, 48.0f, 192.0f); |
| ID2D1RenderTarget_GetDpi(rt, &dpi_x, &dpi_y); |
| ok(dpi_x == 48.0f, "Got unexpected dpi_x %.8e.\n", dpi_x); |
| ok(dpi_y == 192.0f, "Got unexpected dpi_x %.8e.\n", dpi_y); |
| size = ID2D1RenderTarget_GetSize(rt); |
| ok(size.width == 1280.0f, "Got unexpected width %.8e.\n", size.width); |
| ok(size.height == 240.0f, "Got unexpected height %.8e.\n", size.height); |
| pixel_size = ID2D1RenderTarget_GetPixelSize(rt); |
| ok(pixel_size.width == 640, "Got unexpected width %u.\n", pixel_size.width); |
| ok(pixel_size.height == 480, "Got unexpected height %u.\n", pixel_size.height); |
| |
| /* The effective clip rect is the intersection of all currently pushed |
| * clip rects. Clip rects are in DIPs. */ |
| set_rect(&rect, 0.0f, 0.0f, 1280.0f, 80.0f); |
| ID2D1RenderTarget_PushAxisAlignedClip(rt, &rect, D2D1_ANTIALIAS_MODE_ALIASED); |
| set_rect(&rect, 0.0f, 0.0f, 426.0f, 240.0f); |
| ID2D1RenderTarget_PushAxisAlignedClip(rt, &rect, D2D1_ANTIALIAS_MODE_ALIASED); |
| |
| set_color(&color, 0.0f, 1.0f, 0.0f, 1.0f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| ID2D1RenderTarget_PopAxisAlignedClip(rt); |
| ID2D1RenderTarget_PopAxisAlignedClip(rt); |
| |
| ID2D1RenderTarget_SetDpi(rt, 0.0f, 0.0f); |
| ID2D1RenderTarget_GetDpi(rt, &dpi_x, &dpi_y); |
| ok(dpi_x == 96.0f, "Got unexpected dpi_x %.8e.\n", dpi_x); |
| ok(dpi_y == 96.0f, "Got unexpected dpi_y %.8e.\n", dpi_y); |
| |
| /* Transformations apply to clip rects, the effective clip rect is the |
| * (axis-aligned) bounding box of the transformed clip rect. */ |
| set_point(&point, 320.0f, 240.0f); |
| D2D1MakeRotateMatrix(30.0f, point, &matrix); |
| ID2D1RenderTarget_SetTransform(rt, &matrix); |
| set_rect(&rect, 215.0f, 208.0f, 425.0f, 272.0f); |
| ID2D1RenderTarget_PushAxisAlignedClip(rt, &rect, D2D1_ANTIALIAS_MODE_ALIASED); |
| set_color(&color, 1.0f, 1.0f, 1.0f, 1.0f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| ID2D1RenderTarget_PopAxisAlignedClip(rt); |
| |
| /* Transformations are applied when pushing the clip rect, transformations |
| * set afterwards have no effect on the current clip rect. This includes |
| * SetDpi(). */ |
| ID2D1RenderTarget_SetTransform(rt, &identity); |
| set_rect(&rect, 427.0f, 320.0f, 640.0f, 480.0f); |
| ID2D1RenderTarget_PushAxisAlignedClip(rt, &rect, D2D1_ANTIALIAS_MODE_ALIASED); |
| ID2D1RenderTarget_SetTransform(rt, &matrix); |
| ID2D1RenderTarget_SetDpi(rt, 48.0f, 192.0f); |
| set_color(&color, 1.0f, 0.0f, 0.0f, 1.0f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| ID2D1RenderTarget_PopAxisAlignedClip(rt); |
| |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "035a44d4198d6e422e9de6185b5b2c2bac5e33c9"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1RenderTarget_Release(rt); |
| IDXGISurface_Release(surface); |
| IDXGISwapChain_Release(swapchain); |
| ID3D10Device1_Release(device); |
| DestroyWindow(window); |
| } |
| |
| static void test_state_block(void) |
| { |
| IDWriteRenderingParams *text_rendering_params1, *text_rendering_params2; |
| D2D1_DRAWING_STATE_DESCRIPTION drawing_state; |
| ID2D1DrawingStateBlock *state_block; |
| IDWriteFactory *dwrite_factory; |
| IDXGISwapChain *swapchain; |
| ID2D1RenderTarget *rt; |
| ID3D10Device1 *device; |
| IDXGISurface *surface; |
| ID2D1Factory *factory; |
| ULONG refcount; |
| HWND window; |
| HRESULT hr; |
| static const D2D1_MATRIX_3X2_F identity = |
| { |
| 1.0f, 0.0f, |
| 0.0f, 1.0f, |
| 0.0f, 0.0f, |
| }; |
| static const D2D1_MATRIX_3X2_F transform1 = |
| { |
| 1.0f, 2.0f, |
| 3.0f, 4.0f, |
| 5.0f, 6.0f, |
| }; |
| static const D2D1_MATRIX_3X2_F transform2 = |
| { |
| 7.0f, 8.0f, |
| 9.0f, 10.0f, |
| 11.0f, 12.0f, |
| }; |
| |
| if (!(device = create_device())) |
| { |
| skip("Failed to create device, skipping tests.\n"); |
| return; |
| } |
| window = CreateWindowA("static", "d2d1_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE, |
| 0, 0, 640, 480, NULL, NULL, NULL, NULL); |
| swapchain = create_swapchain(device, window, TRUE); |
| hr = IDXGISwapChain_GetBuffer(swapchain, 0, &IID_IDXGISurface, (void **)&surface); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| rt = create_render_target(surface); |
| ok(!!rt, "Failed to create render target.\n"); |
| ID2D1RenderTarget_GetFactory(rt, &factory); |
| hr = DWriteCreateFactory(DWRITE_FACTORY_TYPE_SHARED, &IID_IDWriteFactory, (IUnknown **)&dwrite_factory); |
| ok(SUCCEEDED(hr), "Failed to create dwrite factory, hr %#x.\n", hr); |
| hr = IDWriteFactory_CreateRenderingParams(dwrite_factory, &text_rendering_params1); |
| ok(SUCCEEDED(hr), "Failed to create dwrite rendering params, hr %#x.\n", hr); |
| IDWriteFactory_Release(dwrite_factory); |
| |
| drawing_state.antialiasMode = ID2D1RenderTarget_GetAntialiasMode(rt); |
| ok(drawing_state.antialiasMode == D2D1_ANTIALIAS_MODE_PER_PRIMITIVE, |
| "Got unexpected antialias mode %#x.\n", drawing_state.antialiasMode); |
| drawing_state.textAntialiasMode = ID2D1RenderTarget_GetTextAntialiasMode(rt); |
| ok(drawing_state.textAntialiasMode == D2D1_TEXT_ANTIALIAS_MODE_DEFAULT, |
| "Got unexpected text antialias mode %#x.\n", drawing_state.textAntialiasMode); |
| ID2D1RenderTarget_GetTags(rt, &drawing_state.tag1, &drawing_state.tag2); |
| ok(!drawing_state.tag1 && !drawing_state.tag2, "Got unexpected tags %08x%08x:%08x%08x.\n", |
| (unsigned int)(drawing_state.tag1 >> 32), (unsigned int)(drawing_state.tag1), |
| (unsigned int)(drawing_state.tag2 >> 32), (unsigned int)(drawing_state.tag2)); |
| ID2D1RenderTarget_GetTransform(rt, &drawing_state.transform); |
| ok(!memcmp(&drawing_state.transform, &identity, sizeof(drawing_state.transform)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| drawing_state.transform._11, drawing_state.transform._12, drawing_state.transform._21, |
| drawing_state.transform._22, drawing_state.transform._31, drawing_state.transform._32); |
| ID2D1RenderTarget_GetTextRenderingParams(rt, &text_rendering_params2); |
| ok(!text_rendering_params2, "Got unexpected text rendering params %p.\n", text_rendering_params2); |
| |
| hr = ID2D1Factory_CreateDrawingStateBlock(factory, NULL, NULL, &state_block); |
| ok(SUCCEEDED(hr), "Failed to create drawing state block, hr %#x\n", hr); |
| ID2D1DrawingStateBlock_GetDescription(state_block, &drawing_state); |
| ok(drawing_state.antialiasMode == D2D1_ANTIALIAS_MODE_PER_PRIMITIVE, |
| "Got unexpected antialias mode %#x.\n", drawing_state.antialiasMode); |
| ok(drawing_state.textAntialiasMode == D2D1_TEXT_ANTIALIAS_MODE_DEFAULT, |
| "Got unexpected text antialias mode %#x.\n", drawing_state.textAntialiasMode); |
| ok(!drawing_state.tag1 && !drawing_state.tag2, "Got unexpected tags %08x%08x:%08x%08x.\n", |
| (unsigned int)(drawing_state.tag1 >> 32), (unsigned int)(drawing_state.tag1), |
| (unsigned int)(drawing_state.tag2 >> 32), (unsigned int)(drawing_state.tag2)); |
| ok(!memcmp(&drawing_state.transform, &identity, sizeof(drawing_state.transform)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| drawing_state.transform._11, drawing_state.transform._12, drawing_state.transform._21, |
| drawing_state.transform._22, drawing_state.transform._31, drawing_state.transform._32); |
| ID2D1DrawingStateBlock_GetTextRenderingParams(state_block, &text_rendering_params2); |
| ok(!text_rendering_params2, "Got unexpected text rendering params %p.\n", text_rendering_params2); |
| ID2D1DrawingStateBlock_Release(state_block); |
| |
| drawing_state.antialiasMode = D2D1_ANTIALIAS_MODE_ALIASED; |
| drawing_state.textAntialiasMode = D2D1_TEXT_ANTIALIAS_MODE_ALIASED; |
| drawing_state.tag1 = 0xdead; |
| drawing_state.tag2 = 0xbeef; |
| drawing_state.transform = transform1; |
| hr = ID2D1Factory_CreateDrawingStateBlock(factory, &drawing_state, text_rendering_params1, &state_block); |
| ok(SUCCEEDED(hr), "Failed to create drawing state block, hr %#x\n", hr); |
| |
| ID2D1DrawingStateBlock_GetDescription(state_block, &drawing_state); |
| ok(drawing_state.antialiasMode == D2D1_ANTIALIAS_MODE_ALIASED, |
| "Got unexpected antialias mode %#x.\n", drawing_state.antialiasMode); |
| ok(drawing_state.textAntialiasMode == D2D1_TEXT_ANTIALIAS_MODE_ALIASED, |
| "Got unexpected text antialias mode %#x.\n", drawing_state.textAntialiasMode); |
| ok(drawing_state.tag1 == 0xdead && drawing_state.tag2 == 0xbeef, "Got unexpected tags %08x%08x:%08x%08x.\n", |
| (unsigned int)(drawing_state.tag1 >> 32), (unsigned int)(drawing_state.tag1), |
| (unsigned int)(drawing_state.tag2 >> 32), (unsigned int)(drawing_state.tag2)); |
| ok(!memcmp(&drawing_state.transform, &transform1, sizeof(drawing_state.transform)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| drawing_state.transform._11, drawing_state.transform._12, drawing_state.transform._21, |
| drawing_state.transform._22, drawing_state.transform._31, drawing_state.transform._32); |
| ID2D1DrawingStateBlock_GetTextRenderingParams(state_block, &text_rendering_params2); |
| ok(text_rendering_params2 == text_rendering_params1, "Got unexpected text rendering params %p, expected %p.\n", |
| text_rendering_params2, text_rendering_params1); |
| IDWriteRenderingParams_Release(text_rendering_params2); |
| |
| ID2D1RenderTarget_RestoreDrawingState(rt, state_block); |
| |
| drawing_state.antialiasMode = ID2D1RenderTarget_GetAntialiasMode(rt); |
| ok(drawing_state.antialiasMode == D2D1_ANTIALIAS_MODE_ALIASED, |
| "Got unexpected antialias mode %#x.\n", drawing_state.antialiasMode); |
| drawing_state.textAntialiasMode = ID2D1RenderTarget_GetTextAntialiasMode(rt); |
| ok(drawing_state.textAntialiasMode == D2D1_TEXT_ANTIALIAS_MODE_ALIASED, |
| "Got unexpected text antialias mode %#x.\n", drawing_state.textAntialiasMode); |
| ID2D1RenderTarget_GetTags(rt, &drawing_state.tag1, &drawing_state.tag2); |
| ok(drawing_state.tag1 == 0xdead && drawing_state.tag2 == 0xbeef, "Got unexpected tags %08x%08x:%08x%08x.\n", |
| (unsigned int)(drawing_state.tag1 >> 32), (unsigned int)(drawing_state.tag1), |
| (unsigned int)(drawing_state.tag2 >> 32), (unsigned int)(drawing_state.tag2)); |
| ID2D1RenderTarget_GetTransform(rt, &drawing_state.transform); |
| ok(!memcmp(&drawing_state.transform, &transform1, sizeof(drawing_state.transform)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| drawing_state.transform._11, drawing_state.transform._12, drawing_state.transform._21, |
| drawing_state.transform._22, drawing_state.transform._31, drawing_state.transform._32); |
| ID2D1RenderTarget_GetTextRenderingParams(rt, &text_rendering_params2); |
| ok(text_rendering_params2 == text_rendering_params1, "Got unexpected text rendering params %p, expected %p.\n", |
| text_rendering_params2, text_rendering_params1); |
| IDWriteRenderingParams_Release(text_rendering_params2); |
| |
| ID2D1RenderTarget_SetAntialiasMode(rt, D2D1_ANTIALIAS_MODE_PER_PRIMITIVE); |
| ID2D1RenderTarget_SetTextAntialiasMode(rt, D2D1_TEXT_ANTIALIAS_MODE_GRAYSCALE); |
| ID2D1RenderTarget_SetTags(rt, 1, 2); |
| ID2D1RenderTarget_SetTransform(rt, &transform2); |
| ID2D1RenderTarget_SetTextRenderingParams(rt, NULL); |
| |
| drawing_state.antialiasMode = ID2D1RenderTarget_GetAntialiasMode(rt); |
| ok(drawing_state.antialiasMode == D2D1_ANTIALIAS_MODE_PER_PRIMITIVE, |
| "Got unexpected antialias mode %#x.\n", drawing_state.antialiasMode); |
| drawing_state.textAntialiasMode = ID2D1RenderTarget_GetTextAntialiasMode(rt); |
| ok(drawing_state.textAntialiasMode == D2D1_TEXT_ANTIALIAS_MODE_GRAYSCALE, |
| "Got unexpected text antialias mode %#x.\n", drawing_state.textAntialiasMode); |
| ID2D1RenderTarget_GetTags(rt, &drawing_state.tag1, &drawing_state.tag2); |
| ok(drawing_state.tag1 == 1 && drawing_state.tag2 == 2, "Got unexpected tags %08x%08x:%08x%08x.\n", |
| (unsigned int)(drawing_state.tag1 >> 32), (unsigned int)(drawing_state.tag1), |
| (unsigned int)(drawing_state.tag2 >> 32), (unsigned int)(drawing_state.tag2)); |
| ID2D1RenderTarget_GetTransform(rt, &drawing_state.transform); |
| ok(!memcmp(&drawing_state.transform, &transform2, sizeof(drawing_state.transform)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| drawing_state.transform._11, drawing_state.transform._12, drawing_state.transform._21, |
| drawing_state.transform._22, drawing_state.transform._31, drawing_state.transform._32); |
| ID2D1RenderTarget_GetTextRenderingParams(rt, &text_rendering_params2); |
| ok(!text_rendering_params2, "Got unexpected text rendering params %p.\n", text_rendering_params2); |
| |
| ID2D1RenderTarget_SaveDrawingState(rt, state_block); |
| |
| ID2D1DrawingStateBlock_GetDescription(state_block, &drawing_state); |
| ok(drawing_state.antialiasMode == D2D1_ANTIALIAS_MODE_PER_PRIMITIVE, |
| "Got unexpected antialias mode %#x.\n", drawing_state.antialiasMode); |
| ok(drawing_state.textAntialiasMode == D2D1_TEXT_ANTIALIAS_MODE_GRAYSCALE, |
| "Got unexpected text antialias mode %#x.\n", drawing_state.textAntialiasMode); |
| ok(drawing_state.tag1 == 1 && drawing_state.tag2 == 2, "Got unexpected tags %08x%08x:%08x%08x.\n", |
| (unsigned int)(drawing_state.tag1 >> 32), (unsigned int)(drawing_state.tag1), |
| (unsigned int)(drawing_state.tag2 >> 32), (unsigned int)(drawing_state.tag2)); |
| ok(!memcmp(&drawing_state.transform, &transform2, sizeof(drawing_state.transform)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| drawing_state.transform._11, drawing_state.transform._12, drawing_state.transform._21, |
| drawing_state.transform._22, drawing_state.transform._31, drawing_state.transform._32); |
| ID2D1DrawingStateBlock_GetTextRenderingParams(state_block, &text_rendering_params2); |
| ok(!text_rendering_params2, "Got unexpected text rendering params %p.\n", text_rendering_params2); |
| |
| drawing_state.antialiasMode = D2D1_ANTIALIAS_MODE_ALIASED; |
| drawing_state.textAntialiasMode = D2D1_TEXT_ANTIALIAS_MODE_CLEARTYPE; |
| drawing_state.tag1 = 3; |
| drawing_state.tag2 = 4; |
| drawing_state.transform = transform1; |
| ID2D1DrawingStateBlock_SetDescription(state_block, &drawing_state); |
| ID2D1DrawingStateBlock_SetTextRenderingParams(state_block, text_rendering_params1); |
| |
| ID2D1DrawingStateBlock_GetDescription(state_block, &drawing_state); |
| ok(drawing_state.antialiasMode == D2D1_ANTIALIAS_MODE_ALIASED, |
| "Got unexpected antialias mode %#x.\n", drawing_state.antialiasMode); |
| ok(drawing_state.textAntialiasMode == D2D1_TEXT_ANTIALIAS_MODE_CLEARTYPE, |
| "Got unexpected text antialias mode %#x.\n", drawing_state.textAntialiasMode); |
| ok(drawing_state.tag1 == 3 && drawing_state.tag2 == 4, "Got unexpected tags %08x%08x:%08x%08x.\n", |
| (unsigned int)(drawing_state.tag1 >> 32), (unsigned int)(drawing_state.tag1), |
| (unsigned int)(drawing_state.tag2 >> 32), (unsigned int)(drawing_state.tag2)); |
| ok(!memcmp(&drawing_state.transform, &transform1, sizeof(drawing_state.transform)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| drawing_state.transform._11, drawing_state.transform._12, drawing_state.transform._21, |
| drawing_state.transform._22, drawing_state.transform._31, drawing_state.transform._32); |
| ID2D1DrawingStateBlock_GetTextRenderingParams(state_block, &text_rendering_params2); |
| ok(text_rendering_params2 == text_rendering_params1, "Got unexpected text rendering params %p, expected %p.\n", |
| text_rendering_params2, text_rendering_params1); |
| IDWriteRenderingParams_Release(text_rendering_params2); |
| |
| ID2D1DrawingStateBlock_Release(state_block); |
| |
| refcount = IDWriteRenderingParams_Release(text_rendering_params1); |
| ok(!refcount, "Rendering params %u references left.\n", refcount); |
| ID2D1Factory_Release(factory); |
| ID2D1RenderTarget_Release(rt); |
| IDXGISurface_Release(surface); |
| IDXGISwapChain_Release(swapchain); |
| ID3D10Device1_Release(device); |
| DestroyWindow(window); |
| } |
| |
| static void test_color_brush(void) |
| { |
| D2D1_MATRIX_3X2_F matrix, tmp_matrix; |
| D2D1_BRUSH_PROPERTIES brush_desc; |
| D2D1_COLOR_F color, tmp_color; |
| ID2D1SolidColorBrush *brush; |
| IDXGISwapChain *swapchain; |
| ID2D1RenderTarget *rt; |
| ID3D10Device1 *device; |
| IDXGISurface *surface; |
| D2D1_RECT_F rect; |
| float opacity; |
| HWND window; |
| HRESULT hr; |
| BOOL match; |
| |
| if (!(device = create_device())) |
| { |
| skip("Failed to create device, skipping tests.\n"); |
| return; |
| } |
| window = CreateWindowA("static", "d2d1_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE, |
| 0, 0, 640, 480, NULL, NULL, NULL, NULL); |
| swapchain = create_swapchain(device, window, TRUE); |
| hr = IDXGISwapChain_GetBuffer(swapchain, 0, &IID_IDXGISurface, (void **)&surface); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| rt = create_render_target(surface); |
| ok(!!rt, "Failed to create render target.\n"); |
| |
| ID2D1RenderTarget_SetDpi(rt, 192.0f, 48.0f); |
| ID2D1RenderTarget_SetAntialiasMode(rt, D2D1_ANTIALIAS_MODE_ALIASED); |
| |
| set_color(&color, 0.0f, 0.0f, 0.0f, 0.0f); |
| hr = ID2D1RenderTarget_CreateSolidColorBrush(rt, &color, NULL, &brush); |
| ok(SUCCEEDED(hr), "Failed to create brush, hr %#x.\n", hr); |
| opacity = ID2D1SolidColorBrush_GetOpacity(brush); |
| ok(opacity == 1.0f, "Got unexpected opacity %.8e.\n", opacity); |
| set_matrix_identity(&matrix); |
| ID2D1SolidColorBrush_GetTransform(brush, &tmp_matrix); |
| ok(!memcmp(&tmp_matrix, &matrix, sizeof(matrix)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| tmp_matrix._11, tmp_matrix._12, tmp_matrix._21, |
| tmp_matrix._22, tmp_matrix._31, tmp_matrix._32); |
| tmp_color = ID2D1SolidColorBrush_GetColor(brush); |
| ok(!memcmp(&tmp_color, &color, sizeof(color)), |
| "Got unexpected color {%.8e, %.8e, %.8e, %.8e}.\n", |
| tmp_color.r, tmp_color.g, tmp_color.b, tmp_color.a); |
| ID2D1SolidColorBrush_Release(brush); |
| |
| set_color(&color, 0.0f, 1.0f, 0.0f, 0.8f); |
| brush_desc.opacity = 0.3f; |
| set_matrix_identity(&matrix); |
| scale_matrix(&matrix, 2.0f, 2.0f); |
| brush_desc.transform = matrix; |
| hr = ID2D1RenderTarget_CreateSolidColorBrush(rt, &color, &brush_desc, &brush); |
| ok(SUCCEEDED(hr), "Failed to create brush, hr %#x.\n", hr); |
| opacity = ID2D1SolidColorBrush_GetOpacity(brush); |
| ok(opacity == 0.3f, "Got unexpected opacity %.8e.\n", opacity); |
| ID2D1SolidColorBrush_GetTransform(brush, &tmp_matrix); |
| ok(!memcmp(&tmp_matrix, &matrix, sizeof(matrix)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| tmp_matrix._11, tmp_matrix._12, tmp_matrix._21, |
| tmp_matrix._22, tmp_matrix._31, tmp_matrix._32); |
| tmp_color = ID2D1SolidColorBrush_GetColor(brush); |
| ok(!memcmp(&tmp_color, &color, sizeof(color)), |
| "Got unexpected color {%.8e, %.8e, %.8e, %.8e}.\n", |
| tmp_color.r, tmp_color.g, tmp_color.b, tmp_color.a); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| |
| set_color(&color, 0.0f, 0.0f, 1.0f, 1.0f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| |
| ID2D1SolidColorBrush_SetOpacity(brush, 1.0f); |
| set_rect(&rect, 40.0f, 120.0f, 120.0f, 360.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)brush); |
| |
| set_matrix_identity(&matrix); |
| scale_matrix(&matrix, 0.5f, 2.0f); |
| translate_matrix(&matrix, 320.0f, 240.0f); |
| rotate_matrix(&matrix, M_PI / 4.0f); |
| ID2D1RenderTarget_SetTransform(rt, &matrix); |
| set_color(&color, 1.0f, 0.0f, 0.0f, 0.625f); |
| ID2D1SolidColorBrush_SetColor(brush, &color); |
| ID2D1SolidColorBrush_SetOpacity(brush, 0.75f); |
| set_rect(&rect, -80.0f, -60.0f, 80.0f, 60.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)brush); |
| |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "6d1218fca5e21fb7e287b3a439d60dbc251f5ceb"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1SolidColorBrush_Release(brush); |
| ID2D1RenderTarget_Release(rt); |
| IDXGISurface_Release(surface); |
| IDXGISwapChain_Release(swapchain); |
| ID3D10Device1_Release(device); |
| DestroyWindow(window); |
| } |
| |
| static void test_bitmap_brush(void) |
| { |
| D2D1_BITMAP_INTERPOLATION_MODE interpolation_mode; |
| D2D1_MATRIX_3X2_F matrix, tmp_matrix; |
| D2D1_BITMAP_PROPERTIES bitmap_desc; |
| ID2D1Bitmap *bitmap, *tmp_bitmap; |
| D2D1_RECT_F src_rect, dst_rect; |
| D2D1_EXTEND_MODE extend_mode; |
| IDXGISwapChain *swapchain; |
| ID2D1BitmapBrush *brush; |
| ID2D1RenderTarget *rt; |
| ID3D10Device1 *device; |
| IDXGISurface *surface; |
| D2D1_COLOR_F color; |
| D2D1_SIZE_U size; |
| unsigned int i; |
| ULONG refcount; |
| float opacity; |
| HWND window; |
| HRESULT hr; |
| BOOL match; |
| |
| static const struct |
| { |
| D2D1_EXTEND_MODE extend_mode_x; |
| D2D1_EXTEND_MODE extend_mode_y; |
| float translate_x; |
| float translate_y; |
| D2D1_RECT_F rect; |
| } |
| extend_mode_tests[] = |
| { |
| {D2D1_EXTEND_MODE_MIRROR, D2D1_EXTEND_MODE_MIRROR, -7.0f, 1.0f, {-4.0f, 0.0f, -8.0f, 4.0f}}, |
| {D2D1_EXTEND_MODE_WRAP, D2D1_EXTEND_MODE_MIRROR, -3.0f, 1.0f, {-4.0f, 4.0f, 0.0f, 0.0f}}, |
| {D2D1_EXTEND_MODE_CLAMP, D2D1_EXTEND_MODE_MIRROR, 1.0f, 1.0f, { 4.0f, 0.0f, 0.0f, 4.0f}}, |
| {D2D1_EXTEND_MODE_MIRROR, D2D1_EXTEND_MODE_WRAP, -7.0f, 5.0f, {-8.0f, 8.0f, -4.0f, 4.0f}}, |
| {D2D1_EXTEND_MODE_WRAP, D2D1_EXTEND_MODE_WRAP, -3.0f, 5.0f, { 0.0f, 4.0f, -4.0f, 8.0f}}, |
| {D2D1_EXTEND_MODE_CLAMP, D2D1_EXTEND_MODE_WRAP, 1.0f, 5.0f, { 0.0f, 8.0f, 4.0f, 4.0f}}, |
| {D2D1_EXTEND_MODE_MIRROR, D2D1_EXTEND_MODE_CLAMP, -7.0f, 9.0f, {-4.0f, 8.0f, -8.0f, 12.0f}}, |
| {D2D1_EXTEND_MODE_WRAP, D2D1_EXTEND_MODE_CLAMP, -3.0f, 9.0f, {-4.0f, 12.0f, 0.0f, 8.0f}}, |
| {D2D1_EXTEND_MODE_CLAMP, D2D1_EXTEND_MODE_CLAMP, 1.0f, 9.0f, { 4.0f, 8.0f, 0.0f, 12.0f}}, |
| }; |
| static const DWORD bitmap_data[] = |
| { |
| 0xffff0000, 0xffffff00, 0xff00ff00, 0xff00ffff, |
| 0xff0000ff, 0xffff00ff, 0xff000000, 0xff7f7f7f, |
| 0xffffffff, 0xffffffff, 0xffffffff, 0xff000000, |
| 0xffffffff, 0xff000000, 0xff000000, 0xff000000, |
| }; |
| |
| if (!(device = create_device())) |
| { |
| skip("Failed to create device, skipping tests.\n"); |
| return; |
| } |
| window = CreateWindowA("static", "d2d1_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE, |
| 0, 0, 640, 480, NULL, NULL, NULL, NULL); |
| swapchain = create_swapchain(device, window, TRUE); |
| hr = IDXGISwapChain_GetBuffer(swapchain, 0, &IID_IDXGISurface, (void **)&surface); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| rt = create_render_target(surface); |
| ok(!!rt, "Failed to create render target.\n"); |
| |
| ID2D1RenderTarget_SetDpi(rt, 192.0f, 48.0f); |
| ID2D1RenderTarget_SetAntialiasMode(rt, D2D1_ANTIALIAS_MODE_ALIASED); |
| |
| set_size_u(&size, 4, 4); |
| bitmap_desc.pixelFormat.format = DXGI_FORMAT_B8G8R8A8_UNORM; |
| bitmap_desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_IGNORE; |
| bitmap_desc.dpiX = 96.0f; |
| bitmap_desc.dpiY = 96.0f; |
| hr = ID2D1RenderTarget_CreateBitmap(rt, size, bitmap_data, 4 * sizeof(*bitmap_data), &bitmap_desc, &bitmap); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| |
| /* Creating a brush with a NULL bitmap crashes on Vista, but works fine on |
| * Windows 7+. */ |
| hr = ID2D1RenderTarget_CreateBitmapBrush(rt, bitmap, NULL, NULL, &brush); |
| ok(SUCCEEDED(hr), "Failed to create brush, hr %#x.\n", hr); |
| ID2D1BitmapBrush_GetBitmap(brush, &tmp_bitmap); |
| ok(tmp_bitmap == bitmap, "Got unexpected bitmap %p, expected %p.\n", tmp_bitmap, bitmap); |
| ID2D1Bitmap_Release(tmp_bitmap); |
| opacity = ID2D1BitmapBrush_GetOpacity(brush); |
| ok(opacity == 1.0f, "Got unexpected opacity %.8e.\n", opacity); |
| set_matrix_identity(&matrix); |
| ID2D1BitmapBrush_GetTransform(brush, &tmp_matrix); |
| ok(!memcmp(&tmp_matrix, &matrix, sizeof(matrix)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| tmp_matrix._11, tmp_matrix._12, tmp_matrix._21, |
| tmp_matrix._22, tmp_matrix._31, tmp_matrix._32); |
| extend_mode = ID2D1BitmapBrush_GetExtendModeX(brush); |
| ok(extend_mode == D2D1_EXTEND_MODE_CLAMP, "Got unexpected extend mode %#x.\n", extend_mode); |
| extend_mode = ID2D1BitmapBrush_GetExtendModeY(brush); |
| ok(extend_mode == D2D1_EXTEND_MODE_CLAMP, "Got unexpected extend mode %#x.\n", extend_mode); |
| interpolation_mode = ID2D1BitmapBrush_GetInterpolationMode(brush); |
| ok(interpolation_mode == D2D1_BITMAP_INTERPOLATION_MODE_LINEAR, |
| "Got unexpected interpolation mode %#x.\n", interpolation_mode); |
| ID2D1BitmapBrush_Release(brush); |
| |
| hr = ID2D1RenderTarget_CreateBitmapBrush(rt, bitmap, NULL, NULL, &brush); |
| ok(SUCCEEDED(hr), "Failed to create brush, hr %#x.\n", hr); |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, 40.0f, 120.0f); |
| scale_matrix(&matrix, 20.0f, 60.0f); |
| ID2D1BitmapBrush_SetTransform(brush, &matrix); |
| ID2D1BitmapBrush_SetInterpolationMode(brush, D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| |
| set_color(&color, 0.0f, 0.0f, 1.0f, 1.0f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| |
| set_rect(&dst_rect, 40.0f, 120.0f, 120.0f, 360.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &dst_rect, (ID2D1Brush *)brush); |
| |
| set_matrix_identity(&matrix); |
| scale_matrix(&matrix, 0.5f, 2.0f); |
| translate_matrix(&matrix, 320.0f, 240.0f); |
| rotate_matrix(&matrix, M_PI / 4.0f); |
| ID2D1RenderTarget_SetTransform(rt, &matrix); |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, -80.0f, -60.0f); |
| scale_matrix(&matrix, 40.0f, 30.0f); |
| ID2D1BitmapBrush_SetTransform(brush, &matrix); |
| ID2D1BitmapBrush_SetOpacity(brush, 0.75f); |
| set_rect(&dst_rect, -80.0f, -60.0f, 80.0f, 60.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &dst_rect, (ID2D1Brush *)brush); |
| |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, 200.0f, 120.0f); |
| scale_matrix(&matrix, 20.0f, 60.0f); |
| ID2D1RenderTarget_SetTransform(rt, &matrix); |
| ID2D1RenderTarget_DrawBitmap(rt, bitmap, NULL, 0.25f, |
| D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR, NULL); |
| set_rect(&dst_rect, -4.0f, 12.0f, -8.0f, 8.0f); |
| ID2D1RenderTarget_DrawBitmap(rt, bitmap, &dst_rect, 0.75f, |
| D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR, NULL); |
| set_rect(&dst_rect, 0.0f, 8.0f, 4.0f, 12.0f); |
| set_rect(&src_rect, 2.0f, 1.0f, 4.0f, 3.0f); |
| ID2D1RenderTarget_DrawBitmap(rt, bitmap, &dst_rect, 1.0f, |
| D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR, &src_rect); |
| |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "393636185359a550d459e1e5f0e25411814f724c"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| |
| ID2D1RenderTarget_Clear(rt, &color); |
| |
| ID2D1BitmapBrush_SetOpacity(brush, 1.0f); |
| for (i = 0; i < sizeof(extend_mode_tests) / sizeof(*extend_mode_tests); ++i) |
| { |
| ID2D1BitmapBrush_SetExtendModeX(brush, extend_mode_tests[i].extend_mode_x); |
| extend_mode = ID2D1BitmapBrush_GetExtendModeX(brush); |
| ok(extend_mode == extend_mode_tests[i].extend_mode_x, |
| "Test %u: Got unexpected extend mode %#x, expected %#x.\n", |
| i, extend_mode, extend_mode_tests[i].extend_mode_x); |
| ID2D1BitmapBrush_SetExtendModeY(brush, extend_mode_tests[i].extend_mode_y); |
| extend_mode = ID2D1BitmapBrush_GetExtendModeY(brush); |
| ok(extend_mode == extend_mode_tests[i].extend_mode_y, |
| "Test %u: Got unexpected extend mode %#x, expected %#x.\n", |
| i, extend_mode, extend_mode_tests[i].extend_mode_y); |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, extend_mode_tests[i].translate_x, extend_mode_tests[i].translate_y); |
| scale_matrix(&matrix, 0.5f, 0.5f); |
| ID2D1BitmapBrush_SetTransform(brush, &matrix); |
| ID2D1RenderTarget_FillRectangle(rt, &extend_mode_tests[i].rect, (ID2D1Brush *)brush); |
| } |
| |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "b4b775afecdae2d26642001f4faff73663bb8b31"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1BitmapBrush_Release(brush); |
| refcount = ID2D1Bitmap_Release(bitmap); |
| ok(!refcount, "Bitmap has %u references left.\n", refcount); |
| ID2D1RenderTarget_Release(rt); |
| IDXGISurface_Release(surface); |
| IDXGISwapChain_Release(swapchain); |
| ID3D10Device1_Release(device); |
| DestroyWindow(window); |
| } |
| |
| static void fill_geometry_sink(ID2D1GeometrySink *sink) |
| { |
| D2D1_POINT_2F point; |
| |
| set_point(&point, 15.0f, 20.0f); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| set_point(&point, 55.0f, 20.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 55.0f, 220.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 25.0f, 220.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 25.0f, 100.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 75.0f, 100.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 75.0f, 300.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 5.0f, 300.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 5.0f, 60.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 45.0f, 60.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 45.0f, 180.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 35.0f, 180.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 35.0f, 140.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 65.0f, 140.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 65.0f, 260.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 15.0f, 260.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| |
| set_point(&point, 155.0f, 300.0f); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| set_point(&point, 155.0f, 160.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 85.0f, 160.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 85.0f, 300.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 120.0f, 300.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 120.0f, 20.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 155.0f, 20.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 155.0f, 160.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 85.0f, 160.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 85.0f, 20.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 120.0f, 20.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 120.0f, 300.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| |
| set_point(&point, 165.0f, 20.0f); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| set_point(&point, 165.0f, 300.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 235.0f, 300.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 235.0f, 20.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| set_point(&point, 225.0f, 60.0f); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| set_point(&point, 225.0f, 260.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 175.0f, 260.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 175.0f, 60.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| set_point(&point, 215.0f, 220.0f); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| set_point(&point, 185.0f, 220.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 185.0f, 100.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 215.0f, 100.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| set_point(&point, 195.0f, 180.0f); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| set_point(&point, 205.0f, 180.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 205.0f, 140.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 195.0f, 140.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| } |
| |
| static void fill_geometry_sink_bezier(ID2D1GeometrySink *sink) |
| { |
| D2D1_QUADRATIC_BEZIER_SEGMENT quadratic; |
| D2D1_POINT_2F point; |
| |
| set_point(&point, 5.0f, 160.0f); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| set_quadratic(&quadratic, 40.0f, 160.0f, 40.0f, 20.0f); |
| ID2D1GeometrySink_AddQuadraticBezier(sink, &quadratic); |
| set_quadratic(&quadratic, 40.0f, 160.0f, 75.0f, 160.0f); |
| ID2D1GeometrySink_AddQuadraticBezier(sink, &quadratic); |
| set_quadratic(&quadratic, 40.0f, 160.0f, 40.0f, 300.0f); |
| ID2D1GeometrySink_AddQuadraticBezier(sink, &quadratic); |
| set_quadratic(&quadratic, 40.0f, 160.0f, 5.0f, 160.0f); |
| ID2D1GeometrySink_AddQuadraticBezier(sink, &quadratic); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| |
| set_point(&point, 20.0f, 160.0f); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| set_quadratic(&quadratic, 20.0f, 80.0f, 40.0f, 80.0f); |
| ID2D1GeometrySink_AddQuadraticBezier(sink, &quadratic); |
| set_quadratic(&quadratic, 60.0f, 80.0f, 60.0f, 160.0f); |
| ID2D1GeometrySink_AddQuadraticBezier(sink, &quadratic); |
| set_quadratic(&quadratic, 60.0f, 240.0f, 40.0f, 240.0f); |
| ID2D1GeometrySink_AddQuadraticBezier(sink, &quadratic); |
| set_quadratic(&quadratic, 20.0f, 240.0f, 20.0f, 160.0f); |
| ID2D1GeometrySink_AddQuadraticBezier(sink, &quadratic); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| } |
| |
| static void test_path_geometry(void) |
| { |
| ID2D1TransformedGeometry *transformed_geometry; |
| D2D1_MATRIX_3X2_F matrix, tmp_matrix; |
| ID2D1GeometrySink *sink, *tmp_sink; |
| D2D1_POINT_2F point = {0.0f, 0.0f}; |
| ID2D1SolidColorBrush *brush; |
| ID2D1PathGeometry *geometry; |
| ID2D1Geometry *tmp_geometry; |
| IDXGISwapChain *swapchain; |
| ID2D1RenderTarget *rt; |
| ID3D10Device1 *device; |
| IDXGISurface *surface; |
| ID2D1Factory *factory; |
| D2D1_COLOR_F color; |
| ULONG refcount; |
| UINT32 count; |
| HWND window; |
| HRESULT hr; |
| BOOL match; |
| |
| if (!(device = create_device())) |
| { |
| skip("Failed to create device, skipping tests.\n"); |
| return; |
| } |
| window = CreateWindowA("static", "d2d1_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE, |
| 0, 0, 640, 480, NULL, NULL, NULL, NULL); |
| swapchain = create_swapchain(device, window, TRUE); |
| hr = IDXGISwapChain_GetBuffer(swapchain, 0, &IID_IDXGISurface, (void **)&surface); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| rt = create_render_target(surface); |
| ok(!!rt, "Failed to create render target.\n"); |
| ID2D1RenderTarget_GetFactory(rt, &factory); |
| |
| ID2D1RenderTarget_SetDpi(rt, 192.0f, 48.0f); |
| ID2D1RenderTarget_SetAntialiasMode(rt, D2D1_ANTIALIAS_MODE_ALIASED); |
| set_color(&color, 0.890f, 0.851f, 0.600f, 1.0f); |
| hr = ID2D1RenderTarget_CreateSolidColorBrush(rt, &color, NULL, &brush); |
| ok(SUCCEEDED(hr), "Failed to create brush, hr %#x.\n", hr); |
| |
| /* Close() when closed. */ |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(SUCCEEDED(hr), "Failed to close geometry sink, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get figure count, hr %#x.\n", hr); |
| ok(!count, "Got unexpected figure count %u.\n", count); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get segment count, hr %#x.\n", hr); |
| ok(!count, "Got unexpected segment count %u.\n", count); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| ID2D1GeometrySink_Release(sink); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get figure count, hr %#x.\n", hr); |
| ok(!count, "Got unexpected figure count %u.\n", count); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get segment count, hr %#x.\n", hr); |
| ok(!count, "Got unexpected segment count %u.\n", count); |
| ID2D1PathGeometry_Release(geometry); |
| |
| /* Open() when closed. */ |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(SUCCEEDED(hr), "Failed to close geometry sink, hr %#x.\n", hr); |
| ID2D1GeometrySink_Release(sink); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get figure count, hr %#x.\n", hr); |
| ok(!count, "Got unexpected figure count %u.\n", count); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get segment count, hr %#x.\n", hr); |
| ok(!count, "Got unexpected segment count %u.\n", count); |
| ID2D1PathGeometry_Release(geometry); |
| |
| /* Open() when open. */ |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &tmp_sink); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(SUCCEEDED(hr), "Failed to close geometry sink, hr %#x.\n", hr); |
| ID2D1GeometrySink_Release(sink); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get figure count, hr %#x.\n", hr); |
| ok(!count, "Got unexpected figure count %u.\n", count); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get segment count, hr %#x.\n", hr); |
| ok(!count, "Got unexpected segment count %u.\n", count); |
| ID2D1PathGeometry_Release(geometry); |
| |
| /* BeginFigure() without EndFigure(). */ |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| ID2D1GeometrySink_Release(sink); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| ID2D1PathGeometry_Release(geometry); |
| |
| /* EndFigure() without BeginFigure(). */ |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| ID2D1GeometrySink_Release(sink); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| ID2D1PathGeometry_Release(geometry); |
| |
| /* BeginFigure()/EndFigure() mismatch. */ |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| ID2D1GeometrySink_Release(sink); |
| ID2D1PathGeometry_Release(geometry); |
| |
| /* AddLine() outside BeginFigure()/EndFigure(). */ |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| ID2D1GeometrySink_AddLine(sink, point); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| ID2D1GeometrySink_AddLine(sink, point); |
| ID2D1GeometrySink_Release(sink); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(hr == D2DERR_WRONG_STATE, "Got unexpected hr %#x.\n", hr); |
| ID2D1PathGeometry_Release(geometry); |
| |
| /* Empty figure. */ |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(SUCCEEDED(hr), "Failed to close geometry sink, hr %#x.\n", hr); |
| ID2D1GeometrySink_Release(sink); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get figure count, hr %#x.\n", hr); |
| ok(count == 1, "Got unexpected figure count %u.\n", count); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get segment count, hr %#x.\n", hr); |
| ok(count == 1, "Got unexpected segment count %u.\n", count); |
| ID2D1PathGeometry_Release(geometry); |
| |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| /* The fillmode that's used is the last one set before the sink is closed. */ |
| ID2D1GeometrySink_SetFillMode(sink, D2D1_FILL_MODE_WINDING); |
| fill_geometry_sink(sink); |
| ID2D1GeometrySink_SetFillMode(sink, D2D1_FILL_MODE_ALTERNATE); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(SUCCEEDED(hr), "Failed to close geometry sink, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get figure count, hr %#x.\n", hr); |
| ok(count == 6, "Got unexpected figure count %u.\n", count); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get segment count, hr %#x.\n", hr); |
| /* Intersections don't create extra segments. */ |
| ok(count == 44, "Got unexpected segment count %u.\n", count); |
| ID2D1GeometrySink_SetFillMode(sink, D2D1_FILL_MODE_WINDING); |
| ID2D1GeometrySink_Release(sink); |
| |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, 80.0f, 640.0f); |
| scale_matrix(&matrix, 1.0f, -1.0f); |
| hr = ID2D1Factory_CreateTransformedGeometry(factory, (ID2D1Geometry *)geometry, &matrix, &transformed_geometry); |
| ok(SUCCEEDED(hr), "Failed to create transformed geometry, hr %#x.\n", hr); |
| |
| ID2D1TransformedGeometry_GetSourceGeometry(transformed_geometry, &tmp_geometry); |
| ok(tmp_geometry == (ID2D1Geometry *)geometry, |
| "Got unexpected source geometry %p, expected %p.\n", tmp_geometry, geometry); |
| ID2D1Geometry_Release(tmp_geometry); |
| ID2D1TransformedGeometry_GetTransform(transformed_geometry, &tmp_matrix); |
| ok(!memcmp(&tmp_matrix, &matrix, sizeof(matrix)), |
| "Got unexpected matrix {%.8e, %.8e, %.8e, %.8e, %.8e, %.8e}.\n", |
| tmp_matrix._11, tmp_matrix._12, tmp_matrix._21, |
| tmp_matrix._22, tmp_matrix._31, tmp_matrix._32); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| set_color(&color, 0.396f, 0.180f, 0.537f, 1.0f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, (ID2D1Brush *)brush, NULL); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)transformed_geometry, (ID2D1Brush *)brush, NULL); |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "3aace1b22aae111cb577614fed16e4eb1650dba5"); |
| ok(match, "Surface does not match.\n"); |
| ID2D1TransformedGeometry_Release(transformed_geometry); |
| ID2D1PathGeometry_Release(geometry); |
| |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| fill_geometry_sink(sink); |
| ID2D1GeometrySink_SetFillMode(sink, D2D1_FILL_MODE_WINDING); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(SUCCEEDED(hr), "Failed to close geometry sink, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get figure count, hr %#x.\n", hr); |
| ok(count == 6, "Got unexpected figure count %u.\n", count); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get segment count, hr %#x.\n", hr); |
| ok(count == 44, "Got unexpected segment count %u.\n", count); |
| ID2D1GeometrySink_Release(sink); |
| |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, 320.0f, 320.0f); |
| scale_matrix(&matrix, -1.0f, 1.0f); |
| hr = ID2D1Factory_CreateTransformedGeometry(factory, (ID2D1Geometry *)geometry, &matrix, &transformed_geometry); |
| ok(SUCCEEDED(hr), "Failed to create transformed geometry, hr %#x.\n", hr); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| ID2D1RenderTarget_Clear(rt, &color); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, (ID2D1Brush *)brush, NULL); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)transformed_geometry, (ID2D1Brush *)brush, NULL); |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "bfb40a1f007694fa07dbd3b854f3f5d9c3e1d76b"); |
| ok(match, "Surface does not match.\n"); |
| ID2D1TransformedGeometry_Release(transformed_geometry); |
| ID2D1PathGeometry_Release(geometry); |
| |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| fill_geometry_sink_bezier(sink); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(SUCCEEDED(hr), "Failed to close geometry sink, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get figure count, hr %#x.\n", hr); |
| ok(count == 2, "Got unexpected figure count %u.\n", count); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get segment count, hr %#x.\n", hr); |
| ok(count == 10, "Got unexpected segment count %u.\n", count); |
| ID2D1GeometrySink_Release(sink); |
| |
| set_matrix_identity(&matrix); |
| scale_matrix(&matrix, 0.5f, 2.0f); |
| translate_matrix(&matrix, 240.0f, -33.0f); |
| rotate_matrix(&matrix, M_PI / 4.0f); |
| scale_matrix(&matrix, 2.0f, 0.5f); |
| hr = ID2D1Factory_CreateTransformedGeometry(factory, (ID2D1Geometry *)geometry, &matrix, &transformed_geometry); |
| ok(SUCCEEDED(hr), "Failed to create transformed geometry, hr %#x.\n", hr); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| ID2D1RenderTarget_Clear(rt, &color); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, (ID2D1Brush *)brush, NULL); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)transformed_geometry, (ID2D1Brush *)brush, NULL); |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_figure(surface, 0, 0, 160, 160, 0xff652e89, 64, |
| "7xoCngECngECngECngECngECngECngECnQEEnAEEnAEEnAEEnAEEmwEGmgEGmgEGmgEGmQEImAEI" |
| "lAEECASLAQgKCIEBDQoMew8KD3YQDBByEgwSbhMOEmwUDhRpFBAUZxUQFWUVEhVjFhIWYRYUFl8X" |
| "FBddFxYWXRYYFlsXGBdaFhoWWRYcFlgVHhVXFSAVVhQiFFUUIxRVEyYTVBIoElQRKhFUECwQUxAu" |
| "EFIOMg5SDTQNUgs4C1IJPAlRCEAIUAZEBlAESARQAU4BTgJQAkgGUAY/C1ALMhNQEyoTUBMyC1AL" |
| "PwZQBkgCUAJOAU4BUARIBFAGRAZQCEAIUQk8CVILOAtSDTQNUg4yDlIQLhBTECwQVBEqEVQSKBJU" |
| "EyYTVBQjFFYUIhRWFSAVVxUeFVgWHBZZFhoWWhcYF1sWGBZcFxYWXhcUF18WFBZhFhIWYxUSFWUV" |
| "EBVnFBAUaRQOFGsTDhJvEgwSchAMEHYPCg96DQoMggEICgiLAQQIBJQBCJgBCJkBBpoBBpoBBpoB" |
| "BpsBBJwBBJwBBJwBBJwBBJ0BAp4BAp4BAp4BAp4BAp4BAp4BAp4BAgAA"); |
| todo_wine ok(match, "Figure does not match.\n"); |
| match = compare_figure(surface, 160, 0, 320, 160, 0xff652e89, 64, |
| "4VIBwAIBWgHlAQFYAecBAVYB6QEBVAHrAQEjDCMB7AECHhQeAu0BAxoYGgPvAQMWHhYD8QEDFCAU" |
| "A/MBBBAkEAT0AQUOJw0F9QEGCioKBvcBBggsCAb4AQgFLgUI+QEJATIBCfsBCAIwAgj8AQcFLAUH" |
| "/QEFCCgIBf4BBAwiDAT/AQIQHBAClwISlwIBPgGAAgI8Av8BAzwD/QEEPAT7AQY6BvkBBzoH+AEI" |
| "OAj3AQk4CfYBCTgK9AELNgvzAQw2DPIBDDYM8QEONA7wAQ40DvABDjQO7wEPNA/uAQ80D+4BEDIQ" |
| "7QERMhHsAREyEewBETIR7AERMhHsAREyEewBETIR7AERMhHsAREyEewBETIR7AERMhHsAREyEewB" |
| "ETIR7AERMhHsAREyEe0BEDIQ7gEQMw/uAQ80D+4BDzQP7wEONA7wAQ40DvEBDDYM8gEMNgzzAQs2" |
| "C/QBCzcK9QEJOAn3AQg4CfcBBzoH+QEGOgb7AQU6BfwBBDwE/QEDPAP/AQE+AZkCDpkCAhIYEgKA" |
| "AgMNIA0D/wEFCSYJBf4BBgYqBgf8AQgDLgMI+wFG+gEIAzADCPkBBwYuBgf3AQYKKgoG9gEFDCgM" |
| "BfUBBBAlDwTzAQQSIhIE8QEDFh4WA/ABAhkaGQLvAQIcFhwC7QECIBAgAusBASgEKAHpAQFWAecB" |
| "AVgB5QEBWgHAAgEA"); |
| todo_wine ok(match, "Figure does not match.\n"); |
| ID2D1TransformedGeometry_Release(transformed_geometry); |
| ID2D1PathGeometry_Release(geometry); |
| |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| fill_geometry_sink_bezier(sink); |
| ID2D1GeometrySink_SetFillMode(sink, D2D1_FILL_MODE_WINDING); |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(SUCCEEDED(hr), "Failed to close geometry sink, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get figure count, hr %#x.\n", hr); |
| ok(count == 2, "Got unexpected figure count %u.\n", count); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get segment count, hr %#x.\n", hr); |
| ok(count == 10, "Got unexpected segment count %u.\n", count); |
| ID2D1GeometrySink_Release(sink); |
| |
| set_matrix_identity(&matrix); |
| scale_matrix(&matrix, 0.5f, 2.0f); |
| translate_matrix(&matrix, 127.0f, 80.0f); |
| rotate_matrix(&matrix, M_PI / -4.0f); |
| scale_matrix(&matrix, 2.0f, 0.5f); |
| hr = ID2D1Factory_CreateTransformedGeometry(factory, (ID2D1Geometry *)geometry, &matrix, &transformed_geometry); |
| ok(SUCCEEDED(hr), "Failed to create transformed geometry, hr %#x.\n", hr); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| ID2D1RenderTarget_Clear(rt, &color); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, (ID2D1Brush *)brush, NULL); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)transformed_geometry, (ID2D1Brush *)brush, NULL); |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_figure(surface, 0, 0, 160, 160, 0xff652e89, 64, |
| "7xoCngECngECngECngECngECngECngECnQEEnAEEnAEEnAEEnAEEmwEGmgEGmgEGmgEGmQEImAEI" |
| "lAEQiwEagQEjeyh2LHIwbjNsNmk4ZzplPGM+YUBfQl1DXURbRlpGWUhYSFdKVkpVS1VMVExUTFRM" |
| "U05STlJOUk5STlFQUFBQUFBQTlRIXD9mMnYqdjJmP1xIVE5QUFBQUFBQUU5STlJOUk5STlNMVExU" |
| "TFRMVEtWSlZKV0hYSFlGWkZbRFxDXkJfQGE+YzxlOmc4aTZrM28wcix2KHojggEaiwEQlAEImAEI" |
| "mQEGmgEGmgEGmgEGmwEEnAEEnAEEnAEEnAEEnQECngECngECngECngECngECngECngEC"); |
| ok(match, "Figure does not match.\n"); |
| match = compare_figure(surface, 160, 0, 320, 160, 0xff652e89, 64, |
| "4VIBwAIBWgHlAQFYAecBAVYB6QEBVAHrAQIhDiIB7QECHRUdAu4BAhkaGQPvAQMWHhYD8QEEEyET" |
| "A/MBBBAkEAT1AQUMKA0F9QEGCioKBvcBBwctBwb5AQgELwQI+QEJATIBCfsBRP0BQ/0BQv8BQf8B" |
| "QIECP4ACQIACQf4BQ/wBRPsBRvoBR/gBSPcBSvYBS/QBTPMBTvIBTvIBT/ABUPABUe4BUu4BUu4B" |
| "U+0BU+wBVOwBVOwBVOwBVOwBVesBVesBVesBVesBVOwBVOwBVOwBVO0BU+0BU+0BUu4BUu8BUe8B" |
| "UPEBT/EBTvIBTvMBTPUBS/UBSvcBSfcBSPkBRvsBRP0BQ/4BQf8BQIECP4ACQIACQf4BQv4BQ/wB" |
| "RPsBCQEyAQn6AQgELwQI+AEHBy0GB/cBBgoqCgb2AQUMKA0F9AEEECUPBPMBBBIiEwPxAQMWHhYD" |
| "8AECGRoZA+4BAh0VHQLsAQIhDiIB6wEBVAHpAQFWAecBAVgB5QEBWgHAAgEA"); |
| ok(match, "Figure does not match.\n"); |
| ID2D1TransformedGeometry_Release(transformed_geometry); |
| ID2D1PathGeometry_Release(geometry); |
| |
| hr = ID2D1Factory_CreatePathGeometry(factory, &geometry); |
| ok(SUCCEEDED(hr), "Failed to create path geometry, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_Open(geometry, &sink); |
| ok(SUCCEEDED(hr), "Failed to open geometry sink, hr %#x.\n", hr); |
| |
| set_point(&point, 40.0f, 20.0f); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| set_point(&point, 75.0f, 300.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 5.0f, 300.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| |
| set_point(&point, 40.0f, 290.0f); |
| ID2D1GeometrySink_BeginFigure(sink, point, D2D1_FIGURE_BEGIN_FILLED); |
| set_point(&point, 55.0f, 160.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| set_point(&point, 25.0f, 160.0f); |
| ID2D1GeometrySink_AddLine(sink, point); |
| ID2D1GeometrySink_EndFigure(sink, D2D1_FIGURE_END_CLOSED); |
| |
| hr = ID2D1GeometrySink_Close(sink); |
| ok(SUCCEEDED(hr), "Failed to close geometry sink, hr %#x.\n", hr); |
| hr = ID2D1PathGeometry_GetFigureCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get figure count, hr %#x.\n", hr); |
| ok(count == 2, "Got unexpected figure count %u.\n", count); |
| hr = ID2D1PathGeometry_GetSegmentCount(geometry, &count); |
| ok(SUCCEEDED(hr), "Failed to get segment count, hr %#x.\n", hr); |
| ok(count == 6, "Got unexpected segment count %u.\n", count); |
| ID2D1GeometrySink_Release(sink); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| ID2D1RenderTarget_Clear(rt, &color); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, (ID2D1Brush *)brush, NULL); |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "a875e68e0cb9c055927b1b50b879f90b24e38470"); |
| ok(match, "Surface does not match.\n"); |
| ID2D1PathGeometry_Release(geometry); |
| |
| ID2D1SolidColorBrush_Release(brush); |
| ID2D1RenderTarget_Release(rt); |
| refcount = ID2D1Factory_Release(factory); |
| ok(!refcount, "Factory has %u references left.\n", refcount); |
| IDXGISurface_Release(surface); |
| IDXGISwapChain_Release(swapchain); |
| ID3D10Device1_Release(device); |
| DestroyWindow(window); |
| } |
| |
| static void test_bitmap_formats(void) |
| { |
| D2D1_BITMAP_PROPERTIES bitmap_desc; |
| IDXGISwapChain *swapchain; |
| D2D1_SIZE_U size = {4, 4}; |
| ID2D1RenderTarget *rt; |
| ID3D10Device1 *device; |
| IDXGISurface *surface; |
| ID2D1Bitmap *bitmap; |
| unsigned int i, j; |
| HWND window; |
| HRESULT hr; |
| |
| static const struct |
| { |
| DXGI_FORMAT format; |
| DWORD mask; |
| } |
| bitmap_formats[] = |
| { |
| {DXGI_FORMAT_R32G32B32A32_FLOAT, 0x8a}, |
| {DXGI_FORMAT_R16G16B16A16_FLOAT, 0x8a}, |
| {DXGI_FORMAT_R16G16B16A16_UNORM, 0x8a}, |
| {DXGI_FORMAT_R8G8B8A8_TYPELESS, 0x00}, |
| {DXGI_FORMAT_R8G8B8A8_UNORM, 0x0a}, |
| {DXGI_FORMAT_R8G8B8A8_UNORM_SRGB, 0x8a}, |
| {DXGI_FORMAT_R8G8B8A8_UINT, 0x00}, |
| {DXGI_FORMAT_R8G8B8A8_SNORM, 0x00}, |
| {DXGI_FORMAT_R8G8B8A8_SINT, 0x00}, |
| {DXGI_FORMAT_A8_UNORM, 0x06}, |
| {DXGI_FORMAT_B8G8R8A8_UNORM, 0x0a}, |
| {DXGI_FORMAT_B8G8R8X8_UNORM, 0x88}, |
| {DXGI_FORMAT_B8G8R8A8_TYPELESS, 0x00}, |
| {DXGI_FORMAT_B8G8R8A8_UNORM_SRGB, 0x8a}, |
| }; |
| |
| if (!(device = create_device())) |
| { |
| skip("Failed to create device, skipping tests.\n"); |
| return; |
| } |
| window = CreateWindowA("static", "d2d1_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE, |
| 0, 0, 640, 480, NULL, NULL, NULL, NULL); |
| swapchain = create_swapchain(device, window, TRUE); |
| hr = IDXGISwapChain_GetBuffer(swapchain, 0, &IID_IDXGISurface, (void **)&surface); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| rt = create_render_target(surface); |
| ok(!!rt, "Failed to create render target.\n"); |
| |
| bitmap_desc.dpiX = 96.0f; |
| bitmap_desc.dpiY = 96.0f; |
| for (i = 0; i < sizeof(bitmap_formats) / sizeof(*bitmap_formats); ++i) |
| { |
| for (j = 0; j < 4; ++j) |
| { |
| if ((bitmap_formats[i].mask & (0x80 | (1u << j))) == (0x80 | (1u << j))) |
| continue; |
| |
| bitmap_desc.pixelFormat.format = bitmap_formats[i].format; |
| bitmap_desc.pixelFormat.alphaMode = j; |
| hr = ID2D1RenderTarget_CreateBitmap(rt, size, NULL, 0, &bitmap_desc, &bitmap); |
| if (bitmap_formats[i].mask & (1u << j)) |
| ok(hr == S_OK, "Got unexpected hr %#x, for format %#x/%#x.\n", |
| hr, bitmap_formats[i].format, j); |
| else |
| ok(hr == D2DERR_UNSUPPORTED_PIXEL_FORMAT, "Got unexpected hr %#x, for format %#x/%#x.\n", |
| hr, bitmap_formats[i].format, j); |
| if (SUCCEEDED(hr)) |
| ID2D1Bitmap_Release(bitmap); |
| } |
| } |
| |
| ID2D1RenderTarget_Release(rt); |
| IDXGISurface_Release(surface); |
| IDXGISwapChain_Release(swapchain); |
| ID3D10Device1_Release(device); |
| DestroyWindow(window); |
| } |
| |
| static void test_alpha_mode(void) |
| { |
| D2D1_RENDER_TARGET_PROPERTIES rt_desc; |
| D2D1_BITMAP_PROPERTIES bitmap_desc; |
| ID2D1SolidColorBrush *color_brush; |
| ID2D1BitmapBrush *bitmap_brush; |
| IDXGISwapChain *swapchain; |
| ID2D1RenderTarget *rt; |
| ID3D10Device1 *device; |
| IDXGISurface *surface; |
| ID2D1Bitmap *bitmap; |
| D2D1_COLOR_F color; |
| D2D1_RECT_F rect; |
| D2D1_SIZE_U size; |
| ULONG refcount; |
| HWND window; |
| HRESULT hr; |
| BOOL match; |
| |
| static const DWORD bitmap_data[] = |
| { |
| 0x7f7f0000, 0x7f7f7f00, 0x7f007f00, 0x7f007f7f, |
| 0x7f00007f, 0x7f7f007f, 0x7f000000, 0x7f404040, |
| 0x7f7f7f7f, 0x7f7f7f7f, 0x7f7f7f7f, 0x7f000000, |
| 0x7f7f7f7f, 0x7f000000, 0x7f000000, 0x7f000000, |
| }; |
| |
| if (!(device = create_device())) |
| { |
| skip("Failed to create device, skipping tests.\n"); |
| return; |
| } |
| window = CreateWindowA("static", "d2d1_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE, |
| 0, 0, 640, 480, NULL, NULL, NULL, NULL); |
| swapchain = create_swapchain(device, window, TRUE); |
| hr = IDXGISwapChain_GetBuffer(swapchain, 0, &IID_IDXGISurface, (void **)&surface); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| rt = create_render_target(surface); |
| ok(!!rt, "Failed to create render target.\n"); |
| |
| ID2D1RenderTarget_SetAntialiasMode(rt, D2D1_ANTIALIAS_MODE_ALIASED); |
| |
| set_size_u(&size, 4, 4); |
| bitmap_desc.pixelFormat.format = DXGI_FORMAT_B8G8R8A8_UNORM; |
| bitmap_desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_IGNORE; |
| bitmap_desc.dpiX = 96.0f / 40.0f; |
| bitmap_desc.dpiY = 96.0f / 30.0f; |
| hr = ID2D1RenderTarget_CreateBitmap(rt, size, bitmap_data, 4 * sizeof(*bitmap_data), &bitmap_desc, &bitmap); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| |
| hr = ID2D1RenderTarget_CreateBitmapBrush(rt, bitmap, NULL, NULL, &bitmap_brush); |
| ok(SUCCEEDED(hr), "Failed to create brush, hr %#x.\n", hr); |
| ID2D1BitmapBrush_SetInterpolationMode(bitmap_brush, D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR); |
| ID2D1BitmapBrush_SetExtendModeX(bitmap_brush, D2D1_EXTEND_MODE_WRAP); |
| ID2D1BitmapBrush_SetExtendModeY(bitmap_brush, D2D1_EXTEND_MODE_WRAP); |
| |
| set_color(&color, 0.0f, 1.0f, 0.0f, 0.75f); |
| hr = ID2D1RenderTarget_CreateSolidColorBrush(rt, &color, NULL, &color_brush); |
| ok(SUCCEEDED(hr), "Failed to create brush, hr %#x.\n", hr); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| ID2D1RenderTarget_Clear(rt, NULL); |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "48c41aff3a130a17ee210866b2ab7d36763934d5"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| set_color(&color, 1.0f, 0.0f, 0.0f, 0.25f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "6487e683730fb5a77c1911388d00b04664c5c4e4"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| set_color(&color, 0.0f, 0.0f, 1.0f, 0.75f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "7a35ba09e43cbaf591388ff1ef8de56157630c98"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| |
| set_rect(&rect, 0.0f, 0.0f, 160.0f, 120.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| set_rect(&rect, 160.0f, 0.0f, 320.0f, 120.0f); |
| ID2D1BitmapBrush_SetOpacity(bitmap_brush, 0.75f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| set_rect(&rect, 320.0f, 0.0f, 480.0f, 120.0f); |
| ID2D1BitmapBrush_SetOpacity(bitmap_brush, 0.25f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| |
| ID2D1Bitmap_Release(bitmap); |
| bitmap_desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_PREMULTIPLIED; |
| hr = ID2D1RenderTarget_CreateBitmap(rt, size, bitmap_data, 4 * sizeof(*bitmap_data), &bitmap_desc, &bitmap); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| ID2D1BitmapBrush_SetBitmap(bitmap_brush, bitmap); |
| |
| set_rect(&rect, 0.0f, 120.0f, 160.0f, 240.0f); |
| ID2D1BitmapBrush_SetOpacity(bitmap_brush, 1.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| set_rect(&rect, 160.0f, 120.0f, 320.0f, 240.0f); |
| ID2D1BitmapBrush_SetOpacity(bitmap_brush, 0.75f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| set_rect(&rect, 320.0f, 120.0f, 480.0f, 240.0f); |
| ID2D1BitmapBrush_SetOpacity(bitmap_brush, 0.25f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| |
| set_rect(&rect, 0.0f, 240.0f, 160.0f, 360.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)color_brush); |
| set_rect(&rect, 160.0f, 240.0f, 320.0f, 360.0f); |
| ID2D1SolidColorBrush_SetOpacity(color_brush, 0.75f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)color_brush); |
| set_rect(&rect, 320.0f, 240.0f, 480.0f, 360.0f); |
| ID2D1SolidColorBrush_SetOpacity(color_brush, 0.25f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)color_brush); |
| |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "14f8ac64b70966c7c3c6281c59aaecdb17c3b16a"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1RenderTarget_Release(rt); |
| rt_desc.type = D2D1_RENDER_TARGET_TYPE_DEFAULT; |
| rt_desc.pixelFormat.format = DXGI_FORMAT_UNKNOWN; |
| rt_desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_IGNORE; |
| rt_desc.dpiX = 0.0f; |
| rt_desc.dpiY = 0.0f; |
| rt_desc.usage = D2D1_RENDER_TARGET_USAGE_NONE; |
| rt_desc.minLevel = D2D1_FEATURE_LEVEL_DEFAULT; |
| rt = create_render_target_desc(surface, &rt_desc); |
| ok(!!rt, "Failed to create render target.\n"); |
| |
| ID2D1RenderTarget_SetAntialiasMode(rt, D2D1_ANTIALIAS_MODE_ALIASED); |
| |
| ID2D1Bitmap_Release(bitmap); |
| bitmap_desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_IGNORE; |
| hr = ID2D1RenderTarget_CreateBitmap(rt, size, bitmap_data, 4 * sizeof(*bitmap_data), &bitmap_desc, &bitmap); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| ID2D1BitmapBrush_SetBitmap(bitmap_brush, bitmap); |
| |
| ID2D1BitmapBrush_Release(bitmap_brush); |
| hr = ID2D1RenderTarget_CreateBitmapBrush(rt, bitmap, NULL, NULL, &bitmap_brush); |
| ok(SUCCEEDED(hr), "Failed to create brush, hr %#x.\n", hr); |
| ID2D1BitmapBrush_SetInterpolationMode(bitmap_brush, D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR); |
| ID2D1BitmapBrush_SetExtendModeX(bitmap_brush, D2D1_EXTEND_MODE_WRAP); |
| ID2D1BitmapBrush_SetExtendModeY(bitmap_brush, D2D1_EXTEND_MODE_WRAP); |
| |
| ID2D1SolidColorBrush_Release(color_brush); |
| set_color(&color, 0.0f, 1.0f, 0.0f, 0.75f); |
| hr = ID2D1RenderTarget_CreateSolidColorBrush(rt, &color, NULL, &color_brush); |
| ok(SUCCEEDED(hr), "Failed to create brush, hr %#x.\n", hr); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| ID2D1RenderTarget_Clear(rt, NULL); |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "b44510bf2d2e61a8d7c0ad862de49a471f1fd13f"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| set_color(&color, 1.0f, 0.0f, 0.0f, 0.25f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "2184f4a9198fc1de09ac85301b7a03eebadd9b81"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| set_color(&color, 0.0f, 0.0f, 1.0f, 0.75f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "6527ec83b4039c895b50f9b3e144fe0cf90d1889"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| |
| set_rect(&rect, 0.0f, 0.0f, 160.0f, 120.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| set_rect(&rect, 160.0f, 0.0f, 320.0f, 120.0f); |
| ID2D1BitmapBrush_SetOpacity(bitmap_brush, 0.75f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| set_rect(&rect, 320.0f, 0.0f, 480.0f, 120.0f); |
| ID2D1BitmapBrush_SetOpacity(bitmap_brush, 0.25f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| |
| ID2D1Bitmap_Release(bitmap); |
| bitmap_desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_PREMULTIPLIED; |
| hr = ID2D1RenderTarget_CreateBitmap(rt, size, bitmap_data, 4 * sizeof(*bitmap_data), &bitmap_desc, &bitmap); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| ID2D1BitmapBrush_SetBitmap(bitmap_brush, bitmap); |
| |
| set_rect(&rect, 0.0f, 120.0f, 160.0f, 240.0f); |
| ID2D1BitmapBrush_SetOpacity(bitmap_brush, 1.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| set_rect(&rect, 160.0f, 120.0f, 320.0f, 240.0f); |
| ID2D1BitmapBrush_SetOpacity(bitmap_brush, 0.75f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| set_rect(&rect, 320.0f, 120.0f, 480.0f, 240.0f); |
| ID2D1BitmapBrush_SetOpacity(bitmap_brush, 0.25f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| |
| set_rect(&rect, 0.0f, 240.0f, 160.0f, 360.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)color_brush); |
| set_rect(&rect, 160.0f, 240.0f, 320.0f, 360.0f); |
| ID2D1SolidColorBrush_SetOpacity(color_brush, 0.75f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)color_brush); |
| set_rect(&rect, 320.0f, 240.0f, 480.0f, 360.0f); |
| ID2D1SolidColorBrush_SetOpacity(color_brush, 0.25f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)color_brush); |
| |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "465f5a3190d7bde408b3206b4be939fb22f8a3d6"); |
| ok(match, "Surface does not match.\n"); |
| |
| refcount = ID2D1Bitmap_Release(bitmap); |
| ok(refcount == 1, "Bitmap has %u references left.\n", refcount); |
| ID2D1SolidColorBrush_Release(color_brush); |
| ID2D1BitmapBrush_Release(bitmap_brush); |
| ID2D1RenderTarget_Release(rt); |
| IDXGISurface_Release(surface); |
| IDXGISwapChain_Release(swapchain); |
| ID3D10Device1_Release(device); |
| DestroyWindow(window); |
| } |
| |
| static void test_shared_bitmap(void) |
| { |
| IDXGISwapChain *swapchain1, *swapchain2; |
| IWICBitmap *wic_bitmap1, *wic_bitmap2; |
| D2D1_RENDER_TARGET_PROPERTIES desc; |
| D2D1_BITMAP_PROPERTIES bitmap_desc; |
| IDXGISurface *surface1, *surface2; |
| ID2D1Factory *factory1, *factory2; |
| ID3D10Device1 *device1, *device2; |
| IWICImagingFactory *wic_factory; |
| ID2D1Bitmap *bitmap1, *bitmap2; |
| ID2D1RenderTarget *rt1, *rt2; |
| D2D1_SIZE_U size = {4, 4}; |
| HWND window1, window2; |
| HRESULT hr; |
| |
| if (!(device1 = create_device())) |
| { |
| skip("Failed to create device, skipping tests.\n"); |
| return; |
| } |
| |
| window1 = CreateWindowA("static", "d2d1_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE, |
| 0, 0, 640, 480, NULL, NULL, NULL, NULL); |
| window2 = CreateWindowA("static", "d2d1_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE, |
| 0, 0, 640, 480, NULL, NULL, NULL, NULL); |
| swapchain1 = create_swapchain(device1, window1, TRUE); |
| swapchain2 = create_swapchain(device1, window2, TRUE); |
| hr = IDXGISwapChain_GetBuffer(swapchain1, 0, &IID_IDXGISurface, (void **)&surface1); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| hr = IDXGISwapChain_GetBuffer(swapchain2, 0, &IID_IDXGISurface, (void **)&surface2); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| |
| CoInitializeEx(NULL, COINIT_APARTMENTTHREADED); |
| hr = CoCreateInstance(&CLSID_WICImagingFactory, NULL, CLSCTX_INPROC_SERVER, |
| &IID_IWICImagingFactory, (void **)&wic_factory); |
| ok(SUCCEEDED(hr), "Failed to create WIC imaging factory, hr %#x.\n", hr); |
| hr = IWICImagingFactory_CreateBitmap(wic_factory, 640, 480, |
| &GUID_WICPixelFormat32bppPBGRA, WICBitmapCacheOnDemand, &wic_bitmap1); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| hr = IWICImagingFactory_CreateBitmap(wic_factory, 640, 480, |
| &GUID_WICPixelFormat32bppPBGRA, WICBitmapCacheOnDemand, &wic_bitmap2); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| IWICImagingFactory_Release(wic_factory); |
| |
| desc.type = D2D1_RENDER_TARGET_TYPE_DEFAULT; |
| desc.pixelFormat.format = DXGI_FORMAT_UNKNOWN; |
| desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_PREMULTIPLIED; |
| desc.dpiX = 0.0f; |
| desc.dpiY = 0.0f; |
| desc.usage = D2D1_RENDER_TARGET_USAGE_NONE; |
| desc.minLevel = D2D1_FEATURE_LEVEL_DEFAULT; |
| |
| bitmap_desc.pixelFormat.format = DXGI_FORMAT_B8G8R8A8_UNORM; |
| bitmap_desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_PREMULTIPLIED; |
| bitmap_desc.dpiX = 96.0f; |
| bitmap_desc.dpiY = 96.0f; |
| |
| hr = D2D1CreateFactory(D2D1_FACTORY_TYPE_SINGLE_THREADED, &IID_ID2D1Factory, NULL, (void **)&factory1); |
| ok(SUCCEEDED(hr), "Failed to create factory, hr %#x.\n", hr); |
| hr = D2D1CreateFactory(D2D1_FACTORY_TYPE_SINGLE_THREADED, &IID_ID2D1Factory, NULL, (void **)&factory2); |
| ok(SUCCEEDED(hr), "Failed to create factory, hr %#x.\n", hr); |
| |
| /* DXGI surface render targets with the same device and factory. */ |
| hr = ID2D1Factory_CreateDxgiSurfaceRenderTarget(factory1, surface1, &desc, &rt1); |
| ok(SUCCEEDED(hr), "Failed to create render target, hr %#x.\n", hr); |
| hr = ID2D1RenderTarget_CreateBitmap(rt1, size, NULL, 0, &bitmap_desc, &bitmap1); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| |
| hr = ID2D1Factory_CreateDxgiSurfaceRenderTarget(factory1, surface2, &desc, &rt2); |
| ok(SUCCEEDED(hr), "Failed to create render target, hr %#x.\n", hr); |
| hr = ID2D1RenderTarget_CreateSharedBitmap(rt2, &IID_ID2D1Bitmap, bitmap1, NULL, &bitmap2); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| ID2D1Bitmap_Release(bitmap2); |
| hr = ID2D1RenderTarget_CreateSharedBitmap(rt2, &IID_IUnknown, bitmap1, NULL, &bitmap2); |
| ok(hr == E_INVALIDARG, "Got unexpected hr %#x.\n", hr); |
| ID2D1RenderTarget_Release(rt2); |
| |
| /* DXGI surface render targets with the same device but different factories. */ |
| hr = ID2D1Factory_CreateDxgiSurfaceRenderTarget(factory2, surface2, &desc, &rt2); |
| ok(SUCCEEDED(hr), "Failed to create render target, hr %#x.\n", hr); |
| hr = ID2D1RenderTarget_CreateSharedBitmap(rt2, &IID_ID2D1Bitmap, bitmap1, NULL, &bitmap2); |
| ok(hr == D2DERR_WRONG_FACTORY, "Got unexpected hr %#x.\n", hr); |
| ID2D1RenderTarget_Release(rt2); |
| |
| /* DXGI surface render targets with different devices but the same factory. */ |
| IDXGISurface_Release(surface2); |
| IDXGISwapChain_Release(swapchain2); |
| device2 = create_device(); |
| ok(!!device2, "Failed to create device.\n"); |
| swapchain2 = create_swapchain(device2, window2, TRUE); |
| hr = IDXGISwapChain_GetBuffer(swapchain2, 0, &IID_IDXGISurface, (void **)&surface2); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| |
| hr = ID2D1Factory_CreateDxgiSurfaceRenderTarget(factory1, surface2, &desc, &rt2); |
| ok(SUCCEEDED(hr), "Failed to create render target, hr %#x.\n", hr); |
| hr = ID2D1RenderTarget_CreateSharedBitmap(rt2, &IID_ID2D1Bitmap, bitmap1, NULL, &bitmap2); |
| ok(hr == D2DERR_UNSUPPORTED_OPERATION, "Got unexpected hr %#x.\n", hr); |
| ID2D1RenderTarget_Release(rt2); |
| |
| /* DXGI surface render targets with different devices and different factories. */ |
| hr = ID2D1Factory_CreateDxgiSurfaceRenderTarget(factory2, surface2, &desc, &rt2); |
| ok(SUCCEEDED(hr), "Failed to create render target, hr %#x.\n", hr); |
| hr = ID2D1RenderTarget_CreateSharedBitmap(rt2, &IID_ID2D1Bitmap, bitmap1, NULL, &bitmap2); |
| ok(hr == D2DERR_WRONG_FACTORY, "Got unexpected hr %#x.\n", hr); |
| ID2D1RenderTarget_Release(rt2); |
| |
| /* DXGI surface render target and WIC bitmap render target, same factory. */ |
| hr = ID2D1Factory_CreateWicBitmapRenderTarget(factory1, wic_bitmap2, &desc, &rt2); |
| ok(SUCCEEDED(hr), "Failed to create render target, hr %#x.\n", hr); |
| hr = ID2D1RenderTarget_CreateSharedBitmap(rt2, &IID_ID2D1Bitmap, bitmap1, NULL, &bitmap2); |
| ok(hr == D2DERR_UNSUPPORTED_OPERATION, "Got unexpected hr %#x.\n", hr); |
| ID2D1RenderTarget_Release(rt2); |
| |
| /* WIC bitmap render targets on different D2D factories. */ |
| ID2D1Bitmap_Release(bitmap1); |
| ID2D1RenderTarget_Release(rt1); |
| hr = ID2D1Factory_CreateWicBitmapRenderTarget(factory1, wic_bitmap1, &desc, &rt1); |
| ok(SUCCEEDED(hr), "Failed to create render target, hr %#x.\n", hr); |
| hr = ID2D1RenderTarget_CreateBitmap(rt1, size, NULL, 0, &bitmap_desc, &bitmap1); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| |
| hr = ID2D1Factory_CreateWicBitmapRenderTarget(factory2, wic_bitmap2, &desc, &rt2); |
| ok(SUCCEEDED(hr), "Failed to create render target, hr %#x.\n", hr); |
| hr = ID2D1RenderTarget_CreateSharedBitmap(rt2, &IID_ID2D1Bitmap, bitmap1, NULL, &bitmap2); |
| ok(hr == D2DERR_WRONG_FACTORY, "Got unexpected hr %#x.\n", hr); |
| ID2D1RenderTarget_Release(rt2); |
| |
| /* WIC bitmap render targets on the same D2D factory. */ |
| hr = ID2D1Factory_CreateWicBitmapRenderTarget(factory1, wic_bitmap2, &desc, &rt2); |
| ok(SUCCEEDED(hr), "Failed to create render target, hr %#x.\n", hr); |
| hr = ID2D1RenderTarget_CreateSharedBitmap(rt2, &IID_ID2D1Bitmap, bitmap1, NULL, &bitmap2); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| ID2D1Bitmap_Release(bitmap2); |
| ID2D1RenderTarget_Release(rt2); |
| |
| ID2D1Bitmap_Release(bitmap1); |
| ID2D1RenderTarget_Release(rt1); |
| ID2D1Factory_Release(factory2); |
| ID2D1Factory_Release(factory1); |
| IWICBitmap_Release(wic_bitmap2); |
| IWICBitmap_Release(wic_bitmap1); |
| IDXGISurface_Release(surface2); |
| IDXGISurface_Release(surface1); |
| IDXGISwapChain_Release(swapchain2); |
| IDXGISwapChain_Release(swapchain1); |
| ID3D10Device1_Release(device2); |
| ID3D10Device1_Release(device1); |
| DestroyWindow(window2); |
| DestroyWindow(window1); |
| CoUninitialize(); |
| } |
| |
| static void test_bitmap_updates(void) |
| { |
| D2D1_BITMAP_PROPERTIES bitmap_desc; |
| IDXGISwapChain *swapchain; |
| ID2D1RenderTarget *rt; |
| ID3D10Device1 *device; |
| IDXGISurface *surface; |
| D2D1_RECT_U dst_rect; |
| ID2D1Bitmap *bitmap; |
| D2D1_COLOR_F color; |
| D2D1_RECT_F rect; |
| D2D1_SIZE_U size; |
| HWND window; |
| HRESULT hr; |
| BOOL match; |
| |
| static const DWORD bitmap_data[] = |
| { |
| 0xffff0000, 0xffffff00, 0xff00ff00, 0xff00ffff, |
| 0xff0000ff, 0xffff00ff, 0xff000000, 0xff7f7f7f, |
| 0xffffffff, 0xffffffff, 0xffffffff, 0xff000000, |
| 0xffffffff, 0xff000000, 0xff000000, 0xff000000, |
| }; |
| |
| if (!(device = create_device())) |
| { |
| skip("Failed to create device, skipping tests.\n"); |
| return; |
| } |
| window = CreateWindowA("static", "d2d1_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE, |
| 0, 0, 640, 480, NULL, NULL, NULL, NULL); |
| swapchain = create_swapchain(device, window, TRUE); |
| hr = IDXGISwapChain_GetBuffer(swapchain, 0, &IID_IDXGISurface, (void **)&surface); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| rt = create_render_target(surface); |
| ok(!!rt, "Failed to create render target.\n"); |
| |
| ID2D1RenderTarget_SetAntialiasMode(rt, D2D1_ANTIALIAS_MODE_ALIASED); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| set_color(&color, 0.0f, 0.0f, 1.0f, 1.0f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| |
| set_size_u(&size, 4, 4); |
| bitmap_desc.pixelFormat.format = DXGI_FORMAT_B8G8R8A8_UNORM; |
| bitmap_desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_PREMULTIPLIED; |
| bitmap_desc.dpiX = 96.0f; |
| bitmap_desc.dpiY = 96.0f; |
| hr = ID2D1RenderTarget_CreateBitmap(rt, size, NULL, 0, &bitmap_desc, &bitmap); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| |
| set_rect(&rect, 0.0f, 0.0f, 320.0f, 240.0f); |
| ID2D1RenderTarget_DrawBitmap(rt, bitmap, &rect, 1.0f, |
| D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR, NULL); |
| |
| ID2D1Bitmap_Release(bitmap); |
| |
| bitmap_desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_IGNORE; |
| hr = ID2D1RenderTarget_CreateBitmap(rt, size, NULL, 0, &bitmap_desc, &bitmap); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| |
| set_rect(&rect, 0.0f, 240.0f, 320.0f, 480.0f); |
| ID2D1RenderTarget_DrawBitmap(rt, bitmap, &rect, 1.0f, |
| D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR, NULL); |
| |
| set_rect_u(&dst_rect, 1, 1, 3, 3); |
| hr = ID2D1Bitmap_CopyFromMemory(bitmap, &dst_rect, bitmap_data, 4 * sizeof(*bitmap_data)); |
| ok(SUCCEEDED(hr), "Failed to update bitmap, hr %#x.\n", hr); |
| set_rect_u(&dst_rect, 0, 3, 3, 4); |
| hr = ID2D1Bitmap_CopyFromMemory(bitmap, &dst_rect, &bitmap_data[6], 4 * sizeof(*bitmap_data)); |
| ok(SUCCEEDED(hr), "Failed to update bitmap, hr %#x.\n", hr); |
| set_rect_u(&dst_rect, 0, 0, 4, 1); |
| hr = ID2D1Bitmap_CopyFromMemory(bitmap, &dst_rect, &bitmap_data[10], 4 * sizeof(*bitmap_data)); |
| ok(SUCCEEDED(hr), "Failed to update bitmap, hr %#x.\n", hr); |
| set_rect_u(&dst_rect, 0, 1, 1, 3); |
| hr = ID2D1Bitmap_CopyFromMemory(bitmap, &dst_rect, &bitmap_data[2], sizeof(*bitmap_data)); |
| ok(SUCCEEDED(hr), "Failed to update bitmap, hr %#x.\n", hr); |
| set_rect_u(&dst_rect, 4, 4, 3, 1); |
| hr = ID2D1Bitmap_CopyFromMemory(bitmap, &dst_rect, bitmap_data, sizeof(*bitmap_data)); |
| ok(SUCCEEDED(hr), "Failed to update bitmap, hr %#x.\n", hr); |
| set_rect(&rect, 320.0f, 240.0f, 640.0f, 480.0f); |
| ID2D1RenderTarget_DrawBitmap(rt, bitmap, &rect, 1.0f, |
| D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR, NULL); |
| |
| hr = ID2D1Bitmap_CopyFromMemory(bitmap, NULL, bitmap_data, 4 * sizeof(*bitmap_data)); |
| ok(SUCCEEDED(hr), "Failed to update bitmap, hr %#x.\n", hr); |
| set_rect(&rect, 320.0f, 0.0f, 640.0f, 240.0f); |
| ID2D1RenderTarget_DrawBitmap(rt, bitmap, &rect, 1.0f, |
| D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR, NULL); |
| |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| |
| match = compare_surface(surface, "cb8136c91fbbdc76bb83b8c09edc1907b0a5d0a6"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1Bitmap_Release(bitmap); |
| ID2D1RenderTarget_Release(rt); |
| IDXGISurface_Release(surface); |
| IDXGISwapChain_Release(swapchain); |
| ID3D10Device1_Release(device); |
| DestroyWindow(window); |
| } |
| |
| static void test_opacity_brush(void) |
| { |
| ID2D1BitmapBrush *bitmap_brush, *opacity_brush; |
| D2D1_BITMAP_PROPERTIES bitmap_desc; |
| ID2D1RectangleGeometry *geometry; |
| ID2D1SolidColorBrush *color_brush; |
| IDXGISwapChain *swapchain; |
| D2D1_MATRIX_3X2_F matrix; |
| ID2D1RenderTarget *rt; |
| ID3D10Device1 *device; |
| IDXGISurface *surface; |
| ID2D1Factory *factory; |
| ID2D1Bitmap *bitmap; |
| D2D1_COLOR_F color; |
| D2D1_RECT_F rect; |
| D2D1_SIZE_U size; |
| ULONG refcount; |
| HWND window; |
| HRESULT hr; |
| BOOL match; |
| |
| static const DWORD bitmap_data[] = |
| { |
| 0xffff0000, 0x40ffff00, 0x4000ff00, 0xff00ffff, |
| 0x7f0000ff, 0x00ff00ff, 0x00000000, 0x7f7f7f7f, |
| 0x7fffffff, 0x00ffffff, 0x00ffffff, 0x7f000000, |
| 0xffffffff, 0x40000000, 0x40000000, 0xff000000, |
| }; |
| |
| if (!(device = create_device())) |
| { |
| skip("Failed to create device, skipping tests.\n"); |
| return; |
| } |
| window = CreateWindowA("static", "d2d1_test", WS_OVERLAPPEDWINDOW | WS_VISIBLE, |
| 0, 0, 640, 480, NULL, NULL, NULL, NULL); |
| swapchain = create_swapchain(device, window, TRUE); |
| hr = IDXGISwapChain_GetBuffer(swapchain, 0, &IID_IDXGISurface, (void **)&surface); |
| ok(SUCCEEDED(hr), "Failed to get buffer, hr %#x.\n", hr); |
| rt = create_render_target(surface); |
| ok(!!rt, "Failed to create render target.\n"); |
| ID2D1RenderTarget_GetFactory(rt, &factory); |
| |
| ID2D1RenderTarget_SetDpi(rt, 192.0f, 48.0f); |
| ID2D1RenderTarget_SetAntialiasMode(rt, D2D1_ANTIALIAS_MODE_ALIASED); |
| |
| set_color(&color, 0.0f, 1.0f, 0.0f, 0.8f); |
| hr = ID2D1RenderTarget_CreateSolidColorBrush(rt, &color, NULL, &color_brush); |
| ok(SUCCEEDED(hr), "Failed to create color brush, hr %#x.\n", hr); |
| |
| set_size_u(&size, 4, 4); |
| bitmap_desc.pixelFormat.format = DXGI_FORMAT_B8G8R8A8_UNORM; |
| bitmap_desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_PREMULTIPLIED; |
| bitmap_desc.dpiX = 96.0f; |
| bitmap_desc.dpiY = 96.0f; |
| hr = ID2D1RenderTarget_CreateBitmap(rt, size, bitmap_data, 4 * sizeof(*bitmap_data), &bitmap_desc, &bitmap); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| hr = ID2D1RenderTarget_CreateBitmapBrush(rt, bitmap, NULL, NULL, &opacity_brush); |
| ok(SUCCEEDED(hr), "Failed to create bitmap brush, hr %#x.\n", hr); |
| ID2D1BitmapBrush_SetInterpolationMode(opacity_brush, D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR); |
| refcount = ID2D1Bitmap_Release(bitmap); |
| ok(refcount == 1, "Got unexpected refcount %u.\n", refcount); |
| |
| set_size_u(&size, 1, 1); |
| bitmap_desc.pixelFormat.format = DXGI_FORMAT_B8G8R8A8_UNORM; |
| bitmap_desc.pixelFormat.alphaMode = D2D1_ALPHA_MODE_IGNORE; |
| bitmap_desc.dpiX = 96.0f; |
| bitmap_desc.dpiY = 96.0f; |
| hr = ID2D1RenderTarget_CreateBitmap(rt, size, &bitmap_data[2], sizeof(*bitmap_data), &bitmap_desc, &bitmap); |
| ok(SUCCEEDED(hr), "Failed to create bitmap, hr %#x.\n", hr); |
| hr = ID2D1RenderTarget_CreateBitmapBrush(rt, bitmap, NULL, NULL, &bitmap_brush); |
| ok(SUCCEEDED(hr), "Failed to create bitmap brush, hr %#x.\n", hr); |
| ID2D1BitmapBrush_SetInterpolationMode(bitmap_brush, D2D1_BITMAP_INTERPOLATION_MODE_NEAREST_NEIGHBOR); |
| refcount = ID2D1Bitmap_Release(bitmap); |
| ok(refcount == 1, "Got unexpected refcount %u.\n", refcount); |
| |
| ID2D1RenderTarget_BeginDraw(rt); |
| |
| set_color(&color, 0.0f, 0.0f, 1.0f, 1.0f); |
| ID2D1RenderTarget_Clear(rt, &color); |
| |
| set_rect(&rect, 40.0f, 120.0f, 120.0f, 360.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)color_brush); |
| |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, 120.0f, 120.0f); |
| scale_matrix(&matrix, 20.0f, 60.0f); |
| ID2D1BitmapBrush_SetTransform(opacity_brush, &matrix); |
| set_rect(&rect, 120.0f, 120.0f, 200.0f, 360.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)opacity_brush); |
| |
| set_rect(&rect, 200.0f, 120.0f, 280.0f, 360.0f); |
| ID2D1RenderTarget_FillRectangle(rt, &rect, (ID2D1Brush *)bitmap_brush); |
| |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, 40.0f, 360.0f); |
| scale_matrix(&matrix, 20.0f, 60.0f); |
| ID2D1BitmapBrush_SetTransform(opacity_brush, &matrix); |
| set_rect(&rect, 40.0f, 360.0f, 120.0f, 600.0f); |
| ID2D1Factory_CreateRectangleGeometry(factory, &rect, &geometry); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, |
| (ID2D1Brush *)opacity_brush, (ID2D1Brush *)color_brush); |
| ID2D1RectangleGeometry_Release(geometry); |
| |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, 120.0f, 360.0f); |
| scale_matrix(&matrix, 20.0f, 60.0f); |
| ID2D1BitmapBrush_SetTransform(opacity_brush, &matrix); |
| set_rect(&rect, 120.0f, 360.0f, 200.0f, 600.0f); |
| ID2D1Factory_CreateRectangleGeometry(factory, &rect, &geometry); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, |
| (ID2D1Brush *)color_brush, (ID2D1Brush *)opacity_brush); |
| ID2D1RectangleGeometry_Release(geometry); |
| |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, 200.0f, 360.0f); |
| scale_matrix(&matrix, 20.0f, 60.0f); |
| ID2D1BitmapBrush_SetTransform(opacity_brush, &matrix); |
| set_rect(&rect, 200.0f, 360.0f, 280.0f, 600.0f); |
| ID2D1Factory_CreateRectangleGeometry(factory, &rect, &geometry); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, |
| (ID2D1Brush *)bitmap_brush, (ID2D1Brush *)opacity_brush); |
| |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(hr == D2DERR_INCOMPATIBLE_BRUSH_TYPES, "Got unexpected hr %#x.\n", hr); |
| match = compare_surface(surface, "7141c6c7b3decb91196428efb1856bcbf9872935"); |
| ok(match, "Surface does not match.\n"); |
| ID2D1RenderTarget_BeginDraw(rt); |
| |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, |
| (ID2D1Brush *)bitmap_brush, (ID2D1Brush *)opacity_brush); |
| ID2D1RectangleGeometry_Release(geometry); |
| |
| ID2D1SolidColorBrush_SetOpacity(color_brush, 0.5f); |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, 40.0f, 600.0f); |
| scale_matrix(&matrix, 20.0f, 60.0f); |
| ID2D1BitmapBrush_SetTransform(opacity_brush, &matrix); |
| set_rect(&rect, 40.0f, 600.0f, 120.0f, 840.0f); |
| ID2D1Factory_CreateRectangleGeometry(factory, &rect, &geometry); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, |
| (ID2D1Brush *)opacity_brush, (ID2D1Brush *)color_brush); |
| ID2D1RectangleGeometry_Release(geometry); |
| |
| ID2D1BitmapBrush_SetOpacity(opacity_brush, 0.8f); |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, 120.0f, 600.0f); |
| scale_matrix(&matrix, 20.0f, 60.0f); |
| ID2D1BitmapBrush_SetTransform(opacity_brush, &matrix); |
| set_rect(&rect, 120.0f, 600.0f, 200.0f, 840.0f); |
| ID2D1Factory_CreateRectangleGeometry(factory, &rect, &geometry); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, |
| (ID2D1Brush *)opacity_brush, (ID2D1Brush *)bitmap_brush); |
| ID2D1RectangleGeometry_Release(geometry); |
| |
| set_matrix_identity(&matrix); |
| translate_matrix(&matrix, 200.0f, 600.0f); |
| scale_matrix(&matrix, 20.0f, 60.0f); |
| ID2D1BitmapBrush_SetTransform(opacity_brush, &matrix); |
| set_rect(&rect, 200.0f, 600.0f, 280.0f, 840.0f); |
| ID2D1Factory_CreateRectangleGeometry(factory, &rect, &geometry); |
| ID2D1RenderTarget_FillGeometry(rt, (ID2D1Geometry *)geometry, |
| (ID2D1Brush *)bitmap_brush, (ID2D1Brush *)opacity_brush); |
| ID2D1RectangleGeometry_Release(geometry); |
| |
| hr = ID2D1RenderTarget_EndDraw(rt, NULL, NULL); |
| ok(SUCCEEDED(hr), "Failed to end draw, hr %#x.\n", hr); |
| match = compare_surface(surface, "c3a5802d1750efa3e9122c1a92f6064df3872732"); |
| ok(match, "Surface does not match.\n"); |
| |
| ID2D1BitmapBrush_Release(bitmap_brush); |
| ID2D1BitmapBrush_Release(opacity_brush); |
| ID2D1SolidColorBrush_Release(color_brush); |
| ID2D1RenderTarget_Release(rt); |
| refcount = ID2D1Factory_Release(factory); |
| ok(!refcount, "Factory has %u references left.\n", refcount); |
| IDXGISurface_Release(surface); |
| IDXGISwapChain_Release(swapchain); |
| ID3D10Device1_Release(device); |
| DestroyWindow(window); |
| } |
| |
| START_TEST(d2d1) |
| { |
| test_clip(); |
| test_state_block(); |
| test_color_brush(); |
| test_bitmap_brush(); |
| test_path_geometry(); |
| test_bitmap_formats(); |
| test_alpha_mode(); |
| test_shared_bitmap(); |
| test_bitmap_updates(); |
| test_opacity_brush(); |
| } |
