| /* |
| * Unit tests for named pipe functions in Wine |
| * |
| * Copyright (c) 2002 Dan Kegel |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA |
| */ |
| |
| #include <stdarg.h> |
| #include <stdio.h> |
| |
| #include <windef.h> |
| #include <winbase.h> |
| #include <winsock.h> |
| #include <wtypes.h> |
| #include <winerror.h> |
| |
| #include "wine/test.h" |
| |
| #define PIPENAME "\\\\.\\PiPe\\tests_pipe.c" |
| |
| #define NB_SERVER_LOOPS 8 |
| |
| static HANDLE alarm_event; |
| static BOOL (WINAPI *pDuplicateTokenEx)(HANDLE,DWORD,LPSECURITY_ATTRIBUTES, |
| SECURITY_IMPERSONATION_LEVEL,TOKEN_TYPE,PHANDLE); |
| static DWORD (WINAPI *pQueueUserAPC)(PAPCFUNC pfnAPC, HANDLE hThread, ULONG_PTR dwData); |
| |
| static BOOL user_apc_ran; |
| static void CALLBACK user_apc(ULONG_PTR param) |
| { |
| user_apc_ran = TRUE; |
| } |
| |
| static void test_CreateNamedPipe(int pipemode) |
| { |
| HANDLE hnp; |
| HANDLE hFile; |
| static const char obuf[] = "Bit Bucket"; |
| static const char obuf2[] = "More bits"; |
| char ibuf[32], *pbuf; |
| DWORD written; |
| DWORD readden; |
| DWORD avail; |
| DWORD lpmode; |
| BOOL ret; |
| |
| if (pipemode == PIPE_TYPE_BYTE) |
| trace("test_CreateNamedPipe starting in byte mode\n"); |
| else |
| trace("test_CreateNamedPipe starting in message mode\n"); |
| /* Bad parameter checks */ |
| hnp = CreateNamedPipe("not a named pipe", PIPE_ACCESS_DUPLEX, pipemode | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp == INVALID_HANDLE_VALUE && GetLastError() == ERROR_INVALID_NAME, |
| "CreateNamedPipe should fail if name doesn't start with \\\\.\\pipe\n"); |
| |
| if (pipemode == PIPE_TYPE_BYTE) |
| { |
| /* Bad parameter checks */ |
| hnp = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_READMODE_MESSAGE, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp == INVALID_HANDLE_VALUE && GetLastError() == ERROR_INVALID_PARAMETER, |
| "CreateNamedPipe should fail with PIPE_TYPE_BYTE | PIPE_READMODE_MESSAGE\n"); |
| } |
| |
| hnp = CreateNamedPipe(NULL, |
| PIPE_ACCESS_DUPLEX, pipemode | PIPE_WAIT, |
| 1, 1024, 1024, NMPWAIT_USE_DEFAULT_WAIT, NULL); |
| ok(hnp == INVALID_HANDLE_VALUE && GetLastError() == ERROR_PATH_NOT_FOUND, |
| "CreateNamedPipe should fail if name is NULL\n"); |
| |
| hFile = CreateFileA(PIPENAME, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, 0); |
| ok(hFile == INVALID_HANDLE_VALUE |
| && GetLastError() == ERROR_FILE_NOT_FOUND, |
| "connecting to nonexistent named pipe should fail with ERROR_FILE_NOT_FOUND\n"); |
| |
| /* Functional checks */ |
| |
| hnp = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, pipemode | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| ret = WaitNamedPipeA(PIPENAME, 2000); |
| ok(ret, "WaitNamedPipe failed (%d)\n", GetLastError()); |
| |
| hFile = CreateFileA(PIPENAME, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, 0); |
| ok(hFile != INVALID_HANDLE_VALUE, "CreateFile failed (%d)\n", GetLastError()); |
| |
| ok(!WaitNamedPipeA(PIPENAME, 1000), "WaitNamedPipe succeeded\n"); |
| |
| ok(GetLastError() == ERROR_SEM_TIMEOUT, "wrong error %u\n", GetLastError()); |
| |
| /* don't try to do i/o if one side couldn't be opened, as it hangs */ |
| if (hFile != INVALID_HANDLE_VALUE) { |
| HANDLE hFile2; |
| |
| /* Make sure we can read and write a few bytes in both directions */ |
| memset(ibuf, 0, sizeof(ibuf)); |
| ok(WriteFile(hnp, obuf, sizeof(obuf), &written, NULL), "WriteFile\n"); |
| ok(written == sizeof(obuf), "write file len 1\n"); |
| ok(PeekNamedPipe(hFile, NULL, 0, NULL, &readden, NULL), "Peek\n"); |
| ok(readden == sizeof(obuf), "peek 1 got %d bytes\n", readden); |
| ok(ReadFile(hFile, ibuf, sizeof(ibuf), &readden, NULL), "ReadFile\n"); |
| ok(readden == sizeof(obuf), "read 1 got %d bytes\n", readden); |
| ok(memcmp(obuf, ibuf, written) == 0, "content 1 check\n"); |
| |
| memset(ibuf, 0, sizeof(ibuf)); |
| ok(WriteFile(hFile, obuf2, sizeof(obuf2), &written, NULL), "WriteFile\n"); |
| ok(written == sizeof(obuf2), "write file len 2\n"); |
| ok(PeekNamedPipe(hnp, NULL, 0, NULL, &readden, NULL), "Peek\n"); |
| ok(readden == sizeof(obuf2), "peek 2 got %d bytes\n", readden); |
| ok(PeekNamedPipe(hnp, (LPVOID)1, 0, NULL, &readden, NULL), "Peek\n"); |
| ok(readden == sizeof(obuf2), "peek 2 got %d bytes\n", readden); |
| ok(ReadFile(hnp, ibuf, sizeof(ibuf), &readden, NULL), "ReadFile\n"); |
| ok(readden == sizeof(obuf2), "read 2 got %d bytes\n", readden); |
| ok(memcmp(obuf2, ibuf, written) == 0, "content 2 check\n"); |
| |
| /* Test reading of multiple writes */ |
| memset(ibuf, 0, sizeof(ibuf)); |
| ok(WriteFile(hnp, obuf, sizeof(obuf), &written, NULL), "WriteFile3a\n"); |
| ok(written == sizeof(obuf), "write file len 3a\n"); |
| ok(WriteFile(hnp, obuf2, sizeof(obuf2), &written, NULL), " WriteFile3b\n"); |
| ok(written == sizeof(obuf2), "write file len 3b\n"); |
| ok(PeekNamedPipe(hFile, ibuf, sizeof(ibuf), &readden, &avail, NULL), "Peek3\n"); |
| if (pipemode == PIPE_TYPE_BYTE) { |
| if (readden != sizeof(obuf)) /* Linux only returns the first message */ |
| ok(readden == sizeof(obuf) + sizeof(obuf2), "peek3 got %d bytes\n", readden); |
| else |
| todo_wine ok(readden == sizeof(obuf) + sizeof(obuf2), "peek3 got %d bytes\n", readden); |
| } |
| else |
| { |
| if (readden != sizeof(obuf) + sizeof(obuf2)) /* MacOS returns both messages */ |
| ok(readden == sizeof(obuf), "peek3 got %d bytes\n", readden); |
| else |
| todo_wine ok(readden == sizeof(obuf), "peek3 got %d bytes\n", readden); |
| } |
| if (avail != sizeof(obuf)) /* older Linux kernels only return the first write here */ |
| ok(avail == sizeof(obuf) + sizeof(obuf2), "peek3 got %d bytes available\n", avail); |
| pbuf = ibuf; |
| ok(memcmp(obuf, pbuf, sizeof(obuf)) == 0, "pipe content 3a check\n"); |
| if (pipemode == PIPE_TYPE_BYTE && readden >= sizeof(obuf)+sizeof(obuf2)) { |
| pbuf += sizeof(obuf); |
| ok(memcmp(obuf2, pbuf, sizeof(obuf2)) == 0, "pipe content 3b check\n"); |
| } |
| ok(ReadFile(hFile, ibuf, sizeof(ibuf), &readden, NULL), "ReadFile\n"); |
| ok(readden == sizeof(obuf) + sizeof(obuf2), "read 3 got %d bytes\n", readden); |
| pbuf = ibuf; |
| ok(memcmp(obuf, pbuf, sizeof(obuf)) == 0, "content 3a check\n"); |
| pbuf += sizeof(obuf); |
| ok(memcmp(obuf2, pbuf, sizeof(obuf2)) == 0, "content 3b check\n"); |
| |
| /* Multiple writes in the reverse direction */ |
| memset(ibuf, 0, sizeof(ibuf)); |
| ok(WriteFile(hFile, obuf, sizeof(obuf), &written, NULL), "WriteFile4a\n"); |
| ok(written == sizeof(obuf), "write file len 4a\n"); |
| ok(WriteFile(hFile, obuf2, sizeof(obuf2), &written, NULL), " WriteFile4b\n"); |
| ok(written == sizeof(obuf2), "write file len 4b\n"); |
| ok(PeekNamedPipe(hnp, ibuf, sizeof(ibuf), &readden, &avail, NULL), "Peek4\n"); |
| if (pipemode == PIPE_TYPE_BYTE) { |
| if (readden != sizeof(obuf)) /* Linux only returns the first message */ |
| /* should return all 23 bytes */ |
| ok(readden == sizeof(obuf) + sizeof(obuf2), "peek4 got %d bytes\n", readden); |
| else |
| todo_wine ok(readden == sizeof(obuf) + sizeof(obuf2), "peek4 got %d bytes\n", readden); |
| } |
| else |
| { |
| if (readden != sizeof(obuf) + sizeof(obuf2)) /* MacOS returns both messages */ |
| ok(readden == sizeof(obuf), "peek4 got %d bytes\n", readden); |
| else |
| todo_wine ok(readden == sizeof(obuf), "peek4 got %d bytes\n", readden); |
| } |
| if (avail != sizeof(obuf)) /* older Linux kernels only return the first write here */ |
| ok(avail == sizeof(obuf) + sizeof(obuf2), "peek4 got %d bytes available\n", avail); |
| pbuf = ibuf; |
| ok(memcmp(obuf, pbuf, sizeof(obuf)) == 0, "pipe content 4a check\n"); |
| if (pipemode == PIPE_TYPE_BYTE && readden >= sizeof(obuf)+sizeof(obuf2)) { |
| pbuf += sizeof(obuf); |
| ok(memcmp(obuf2, pbuf, sizeof(obuf2)) == 0, "pipe content 4b check\n"); |
| } |
| ok(ReadFile(hnp, ibuf, sizeof(ibuf), &readden, NULL), "ReadFile\n"); |
| if (pipemode == PIPE_TYPE_BYTE) { |
| ok(readden == sizeof(obuf) + sizeof(obuf2), "read 4 got %d bytes\n", readden); |
| } |
| else { |
| todo_wine { |
| ok(readden == sizeof(obuf), "read 4 got %d bytes\n", readden); |
| } |
| } |
| pbuf = ibuf; |
| ok(memcmp(obuf, pbuf, sizeof(obuf)) == 0, "content 4a check\n"); |
| if (pipemode == PIPE_TYPE_BYTE) { |
| pbuf += sizeof(obuf); |
| ok(memcmp(obuf2, pbuf, sizeof(obuf2)) == 0, "content 4b check\n"); |
| } |
| |
| /* Test reading of multiple writes after a mode change |
| (CreateFile always creates a byte mode pipe) */ |
| lpmode = PIPE_READMODE_MESSAGE; |
| if (pipemode == PIPE_TYPE_BYTE) { |
| /* trying to change the client end of a byte pipe to message mode should fail */ |
| ok(!SetNamedPipeHandleState(hFile, &lpmode, NULL, NULL), "Change mode\n"); |
| } |
| else { |
| todo_wine { |
| ok(SetNamedPipeHandleState(hFile, &lpmode, NULL, NULL), "Change mode\n"); |
| } |
| |
| memset(ibuf, 0, sizeof(ibuf)); |
| ok(WriteFile(hnp, obuf, sizeof(obuf), &written, NULL), "WriteFile5a\n"); |
| ok(written == sizeof(obuf), "write file len 3a\n"); |
| ok(WriteFile(hnp, obuf2, sizeof(obuf2), &written, NULL), " WriteFile5b\n"); |
| ok(written == sizeof(obuf2), "write file len 3b\n"); |
| ok(PeekNamedPipe(hFile, ibuf, sizeof(ibuf), &readden, &avail, NULL), "Peek5\n"); |
| if (readden != sizeof(obuf) + sizeof(obuf2)) /* MacOS returns both writes */ |
| ok(readden == sizeof(obuf), "peek5 got %d bytes\n", readden); |
| else |
| todo_wine ok(readden == sizeof(obuf), "peek5 got %d bytes\n", readden); |
| if (avail != sizeof(obuf)) /* older Linux kernels only return the first write here */ |
| ok(avail == sizeof(obuf) + sizeof(obuf2), "peek5 got %d bytes available\n", avail); |
| else |
| todo_wine ok(avail == sizeof(obuf) + sizeof(obuf2), "peek5 got %d bytes available\n", avail); |
| pbuf = ibuf; |
| ok(memcmp(obuf, pbuf, sizeof(obuf)) == 0, "content 5a check\n"); |
| ok(ReadFile(hFile, ibuf, sizeof(ibuf), &readden, NULL), "ReadFile\n"); |
| todo_wine { |
| ok(readden == sizeof(obuf), "read 5 got %d bytes\n", readden); |
| } |
| pbuf = ibuf; |
| ok(memcmp(obuf, pbuf, sizeof(obuf)) == 0, "content 5a check\n"); |
| |
| /* Multiple writes in the reverse direction */ |
| /* the write of obuf2 from write4 should still be in the buffer */ |
| ok(PeekNamedPipe(hnp, ibuf, sizeof(ibuf), &readden, &avail, NULL), "Peek6a\n"); |
| todo_wine { |
| ok(readden == sizeof(obuf2), "peek6a got %d bytes\n", readden); |
| ok(avail == sizeof(obuf2), "peek6a got %d bytes available\n", avail); |
| } |
| if (avail > 0) { |
| ok(ReadFile(hnp, ibuf, sizeof(ibuf), &readden, NULL), "ReadFile\n"); |
| ok(readden == sizeof(obuf2), "read 6a got %d bytes\n", readden); |
| pbuf = ibuf; |
| ok(memcmp(obuf2, pbuf, sizeof(obuf2)) == 0, "content 6a check\n"); |
| } |
| memset(ibuf, 0, sizeof(ibuf)); |
| ok(WriteFile(hFile, obuf, sizeof(obuf), &written, NULL), "WriteFile6a\n"); |
| ok(written == sizeof(obuf), "write file len 6a\n"); |
| ok(WriteFile(hFile, obuf2, sizeof(obuf2), &written, NULL), " WriteFile6b\n"); |
| ok(written == sizeof(obuf2), "write file len 6b\n"); |
| ok(PeekNamedPipe(hnp, ibuf, sizeof(ibuf), &readden, &avail, NULL), "Peek6\n"); |
| if (readden != sizeof(obuf) + sizeof(obuf2)) /* MacOS returns both writes */ |
| ok(readden == sizeof(obuf), "peek6 got %d bytes\n", readden); |
| else |
| todo_wine ok(readden == sizeof(obuf), "peek6 got %d bytes\n", readden); |
| if (avail != sizeof(obuf)) /* older Linux kernels only return the first write here */ |
| ok(avail == sizeof(obuf) + sizeof(obuf2), "peek6b got %d bytes available\n", avail); |
| pbuf = ibuf; |
| ok(memcmp(obuf, pbuf, sizeof(obuf)) == 0, "content 6a check\n"); |
| ok(ReadFile(hnp, ibuf, sizeof(ibuf), &readden, NULL), "ReadFile\n"); |
| todo_wine { |
| ok(readden == sizeof(obuf), "read 6b got %d bytes\n", readden); |
| } |
| pbuf = ibuf; |
| ok(memcmp(obuf, pbuf, sizeof(obuf)) == 0, "content 6a check\n"); |
| } |
| |
| /* Picky conformance tests */ |
| |
| /* Verify that you can't connect to pipe again |
| * until server calls DisconnectNamedPipe+ConnectNamedPipe |
| * or creates a new pipe |
| * case 1: other client not yet closed |
| */ |
| hFile2 = CreateFileA(PIPENAME, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, 0); |
| ok(hFile2 == INVALID_HANDLE_VALUE, |
| "connecting to named pipe after other client closes but before DisconnectNamedPipe should fail\n"); |
| ok(GetLastError() == ERROR_PIPE_BUSY, |
| "connecting to named pipe before other client closes should fail with ERROR_PIPE_BUSY\n"); |
| |
| ok(CloseHandle(hFile), "CloseHandle\n"); |
| |
| /* case 2: other client already closed */ |
| hFile = CreateFileA(PIPENAME, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, 0); |
| ok(hFile == INVALID_HANDLE_VALUE, |
| "connecting to named pipe after other client closes but before DisconnectNamedPipe should fail\n"); |
| ok(GetLastError() == ERROR_PIPE_BUSY, |
| "connecting to named pipe after other client closes but before DisconnectNamedPipe should fail with ERROR_PIPE_BUSY\n"); |
| |
| ok(DisconnectNamedPipe(hnp), "DisconnectNamedPipe\n"); |
| |
| /* case 3: server has called DisconnectNamedPipe but not ConnectNamed Pipe */ |
| hFile = CreateFileA(PIPENAME, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, 0); |
| ok(hFile == INVALID_HANDLE_VALUE, |
| "connecting to named pipe after other client closes but before DisconnectNamedPipe should fail\n"); |
| ok(GetLastError() == ERROR_PIPE_BUSY, |
| "connecting to named pipe after other client closes but before ConnectNamedPipe should fail with ERROR_PIPE_BUSY\n"); |
| |
| /* to be complete, we'd call ConnectNamedPipe here and loop, |
| * but by default that's blocking, so we'd either have |
| * to turn on the uncommon nonblocking mode, or |
| * use another thread. |
| */ |
| } |
| |
| ok(CloseHandle(hnp), "CloseHandle\n"); |
| |
| trace("test_CreateNamedPipe returning\n"); |
| } |
| |
| static void test_CreateNamedPipe_instances_must_match(void) |
| { |
| HANDLE hnp, hnp2; |
| |
| /* Check no mismatch */ |
| hnp = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 2, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| hnp2 = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 2, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp2 != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| ok(CloseHandle(hnp), "CloseHandle\n"); |
| ok(CloseHandle(hnp2), "CloseHandle\n"); |
| |
| /* Check nMaxInstances */ |
| hnp = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| hnp2 = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp2 == INVALID_HANDLE_VALUE |
| && GetLastError() == ERROR_PIPE_BUSY, "nMaxInstances not obeyed\n"); |
| |
| ok(CloseHandle(hnp), "CloseHandle\n"); |
| |
| /* Check PIPE_ACCESS_* */ |
| hnp = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 2, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| hnp2 = CreateNamedPipe(PIPENAME, PIPE_ACCESS_INBOUND, PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 2, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp2 == INVALID_HANDLE_VALUE |
| && GetLastError() == ERROR_ACCESS_DENIED, "PIPE_ACCESS_* mismatch allowed\n"); |
| |
| ok(CloseHandle(hnp), "CloseHandle\n"); |
| |
| /* check everything else */ |
| hnp = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 4, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| hnp2 = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, PIPE_TYPE_MESSAGE, |
| /* nMaxInstances */ 3, |
| /* nOutBufSize */ 102, |
| /* nInBufSize */ 24, |
| /* nDefaultWait */ 1234, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp2 != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| ok(CloseHandle(hnp), "CloseHandle\n"); |
| ok(CloseHandle(hnp2), "CloseHandle\n"); |
| } |
| |
| /** implementation of alarm() */ |
| static DWORD CALLBACK alarmThreadMain(LPVOID arg) |
| { |
| DWORD_PTR timeout = (DWORD_PTR) arg; |
| trace("alarmThreadMain\n"); |
| if (WaitForSingleObject( alarm_event, timeout ) == WAIT_TIMEOUT) |
| { |
| ok(FALSE, "alarm\n"); |
| ExitProcess(1); |
| } |
| return 1; |
| } |
| |
| static HANDLE hnp = INVALID_HANDLE_VALUE; |
| |
| /** Trivial byte echo server - disconnects after each session */ |
| static DWORD CALLBACK serverThreadMain1(LPVOID arg) |
| { |
| int i; |
| |
| trace("serverThreadMain1 start\n"); |
| /* Set up a simple echo server */ |
| hnp = CreateNamedPipe(PIPENAME "serverThreadMain1", PIPE_ACCESS_DUPLEX, |
| PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| |
| ok(hnp != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| for (i = 0; i < NB_SERVER_LOOPS; i++) { |
| char buf[512]; |
| DWORD written; |
| DWORD readden; |
| DWORD success; |
| |
| /* Wait for client to connect */ |
| trace("Server calling ConnectNamedPipe...\n"); |
| ok(ConnectNamedPipe(hnp, NULL) |
| || GetLastError() == ERROR_PIPE_CONNECTED, "ConnectNamedPipe\n"); |
| trace("ConnectNamedPipe returned.\n"); |
| |
| /* Echo bytes once */ |
| memset(buf, 0, sizeof(buf)); |
| |
| trace("Server reading...\n"); |
| success = ReadFile(hnp, buf, sizeof(buf), &readden, NULL); |
| trace("Server done reading.\n"); |
| ok(success, "ReadFile\n"); |
| ok(readden, "short read\n"); |
| |
| trace("Server writing...\n"); |
| ok(WriteFile(hnp, buf, readden, &written, NULL), "WriteFile\n"); |
| trace("Server done writing.\n"); |
| ok(written == readden, "write file len\n"); |
| |
| /* finish this connection, wait for next one */ |
| ok(FlushFileBuffers(hnp), "FlushFileBuffers\n"); |
| trace("Server done flushing.\n"); |
| ok(DisconnectNamedPipe(hnp), "DisconnectNamedPipe\n"); |
| trace("Server done disconnecting.\n"); |
| } |
| return 0; |
| } |
| |
| /** Trivial byte echo server - closes after each connection */ |
| static DWORD CALLBACK serverThreadMain2(LPVOID arg) |
| { |
| int i; |
| HANDLE hnpNext = 0; |
| |
| trace("serverThreadMain2\n"); |
| /* Set up a simple echo server */ |
| hnp = CreateNamedPipe(PIPENAME "serverThreadMain2", PIPE_ACCESS_DUPLEX, |
| PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 2, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| for (i = 0; i < NB_SERVER_LOOPS; i++) { |
| char buf[512]; |
| DWORD written; |
| DWORD readden; |
| DWORD success; |
| |
| user_apc_ran = FALSE; |
| if (i == 0 && pQueueUserAPC) { |
| trace("Queueing an user APC\n"); /* verify the pipe is non alerable */ |
| success = pQueueUserAPC(&user_apc, GetCurrentThread(), 0); |
| ok(success, "QueueUserAPC failed: %d\n", GetLastError()); |
| } |
| |
| /* Wait for client to connect */ |
| trace("Server calling ConnectNamedPipe...\n"); |
| ok(ConnectNamedPipe(hnp, NULL) |
| || GetLastError() == ERROR_PIPE_CONNECTED, "ConnectNamedPipe\n"); |
| trace("ConnectNamedPipe returned.\n"); |
| |
| /* Echo bytes once */ |
| memset(buf, 0, sizeof(buf)); |
| |
| trace("Server reading...\n"); |
| success = ReadFile(hnp, buf, sizeof(buf), &readden, NULL); |
| trace("Server done reading.\n"); |
| ok(success, "ReadFile\n"); |
| |
| trace("Server writing...\n"); |
| ok(WriteFile(hnp, buf, readden, &written, NULL), "WriteFile\n"); |
| trace("Server done writing.\n"); |
| ok(written == readden, "write file len\n"); |
| |
| /* finish this connection, wait for next one */ |
| ok(FlushFileBuffers(hnp), "FlushFileBuffers\n"); |
| ok(DisconnectNamedPipe(hnp), "DisconnectNamedPipe\n"); |
| |
| ok(user_apc_ran == FALSE, "UserAPC ran, pipe using alertable io mode\n"); |
| |
| if (i == 0 && pQueueUserAPC) |
| SleepEx(0, TRUE); /* get rid of apc */ |
| |
| /* Set up next echo server */ |
| hnpNext = |
| CreateNamedPipe(PIPENAME "serverThreadMain2", PIPE_ACCESS_DUPLEX, |
| PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 2, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| |
| ok(hnpNext != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| ok(CloseHandle(hnp), "CloseHandle\n"); |
| hnp = hnpNext; |
| } |
| return 0; |
| } |
| |
| /** Trivial byte echo server - uses overlapped named pipe calls */ |
| static DWORD CALLBACK serverThreadMain3(LPVOID arg) |
| { |
| int i; |
| HANDLE hEvent; |
| |
| trace("serverThreadMain3\n"); |
| /* Set up a simple echo server */ |
| hnp = CreateNamedPipe(PIPENAME "serverThreadMain3", PIPE_ACCESS_DUPLEX | FILE_FLAG_OVERLAPPED, |
| PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| hEvent = CreateEvent(NULL, /* security attribute */ |
| TRUE, /* manual reset event */ |
| FALSE, /* initial state */ |
| NULL); /* name */ |
| ok(hEvent != NULL, "CreateEvent\n"); |
| |
| for (i = 0; i < NB_SERVER_LOOPS; i++) { |
| char buf[512]; |
| DWORD written; |
| DWORD readden; |
| DWORD dummy; |
| DWORD success; |
| OVERLAPPED oOverlap; |
| int letWFSOEwait = (i & 2); |
| int letGORwait = (i & 1); |
| DWORD err; |
| |
| memset(&oOverlap, 0, sizeof(oOverlap)); |
| oOverlap.hEvent = hEvent; |
| |
| /* Wait for client to connect */ |
| if (i == 0) { |
| trace("Server calling non-overlapped ConnectNamedPipe on overlapped pipe...\n"); |
| success = ConnectNamedPipe(hnp, NULL); |
| err = GetLastError(); |
| ok(success || (err == ERROR_PIPE_CONNECTED), "ConnectNamedPipe failed: %d\n", err); |
| trace("ConnectNamedPipe operation complete.\n"); |
| } else { |
| trace("Server calling overlapped ConnectNamedPipe...\n"); |
| success = ConnectNamedPipe(hnp, &oOverlap); |
| err = GetLastError(); |
| ok(!success && (err == ERROR_IO_PENDING || err == ERROR_PIPE_CONNECTED), "overlapped ConnectNamedPipe\n"); |
| trace("overlapped ConnectNamedPipe returned.\n"); |
| if (!success && (err == ERROR_IO_PENDING)) { |
| if (letWFSOEwait) |
| { |
| DWORD ret; |
| do { |
| ret = WaitForSingleObjectEx(hEvent, INFINITE, TRUE); |
| } while (ret == WAIT_IO_COMPLETION); |
| ok(ret == 0, "wait ConnectNamedPipe returned %x\n", ret); |
| } |
| success = GetOverlappedResult(hnp, &oOverlap, &dummy, letGORwait); |
| if (!letGORwait && !letWFSOEwait && !success) { |
| ok(GetLastError() == ERROR_IO_INCOMPLETE, "GetOverlappedResult\n"); |
| success = GetOverlappedResult(hnp, &oOverlap, &dummy, TRUE); |
| } |
| } |
| ok(success || (err == ERROR_PIPE_CONNECTED), "GetOverlappedResult ConnectNamedPipe\n"); |
| trace("overlapped ConnectNamedPipe operation complete.\n"); |
| } |
| |
| /* Echo bytes once */ |
| memset(buf, 0, sizeof(buf)); |
| |
| trace("Server reading...\n"); |
| success = ReadFile(hnp, buf, sizeof(buf), &readden, &oOverlap); |
| trace("Server ReadFile returned...\n"); |
| err = GetLastError(); |
| ok(success || err == ERROR_IO_PENDING, "overlapped ReadFile\n"); |
| trace("overlapped ReadFile returned.\n"); |
| if (!success && (err == ERROR_IO_PENDING)) { |
| if (letWFSOEwait) |
| { |
| DWORD ret; |
| do { |
| ret = WaitForSingleObjectEx(hEvent, INFINITE, TRUE); |
| } while (ret == WAIT_IO_COMPLETION); |
| ok(ret == 0, "wait ReadFile returned %x\n", ret); |
| } |
| success = GetOverlappedResult(hnp, &oOverlap, &readden, letGORwait); |
| if (!letGORwait && !letWFSOEwait && !success) { |
| ok(GetLastError() == ERROR_IO_INCOMPLETE, "GetOverlappedResult\n"); |
| success = GetOverlappedResult(hnp, &oOverlap, &readden, TRUE); |
| } |
| } |
| trace("Server done reading.\n"); |
| ok(success, "overlapped ReadFile\n"); |
| |
| trace("Server writing...\n"); |
| success = WriteFile(hnp, buf, readden, &written, &oOverlap); |
| trace("Server WriteFile returned...\n"); |
| err = GetLastError(); |
| ok(success || err == ERROR_IO_PENDING, "overlapped WriteFile\n"); |
| trace("overlapped WriteFile returned.\n"); |
| if (!success && (err == ERROR_IO_PENDING)) { |
| if (letWFSOEwait) |
| { |
| DWORD ret; |
| do { |
| ret = WaitForSingleObjectEx(hEvent, INFINITE, TRUE); |
| } while (ret == WAIT_IO_COMPLETION); |
| ok(ret == 0, "wait WriteFile returned %x\n", ret); |
| } |
| success = GetOverlappedResult(hnp, &oOverlap, &written, letGORwait); |
| if (!letGORwait && !letWFSOEwait && !success) { |
| ok(GetLastError() == ERROR_IO_INCOMPLETE, "GetOverlappedResult\n"); |
| success = GetOverlappedResult(hnp, &oOverlap, &written, TRUE); |
| } |
| } |
| trace("Server done writing.\n"); |
| ok(success, "overlapped WriteFile\n"); |
| ok(written == readden, "write file len\n"); |
| |
| /* finish this connection, wait for next one */ |
| ok(FlushFileBuffers(hnp), "FlushFileBuffers\n"); |
| ok(DisconnectNamedPipe(hnp), "DisconnectNamedPipe\n"); |
| } |
| return 0; |
| } |
| |
| /** Trivial byte echo server - uses i/o completion ports */ |
| static DWORD CALLBACK serverThreadMain4(LPVOID arg) |
| { |
| int i; |
| HANDLE hcompletion; |
| BOOL ret; |
| |
| trace("serverThreadMain4\n"); |
| /* Set up a simple echo server */ |
| hnp = CreateNamedPipe(PIPENAME "serverThreadMain4", PIPE_ACCESS_DUPLEX | FILE_FLAG_OVERLAPPED, |
| PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| hcompletion = CreateIoCompletionPort(hnp, NULL, 12345, 1); |
| ok(hcompletion != NULL, "CreateIoCompletionPort failed, error=%i\n", GetLastError()); |
| |
| for (i = 0; i < NB_SERVER_LOOPS; i++) { |
| char buf[512]; |
| DWORD written; |
| DWORD readden; |
| DWORD dummy; |
| DWORD success; |
| OVERLAPPED oConnect; |
| OVERLAPPED oRead; |
| OVERLAPPED oWrite; |
| OVERLAPPED *oResult; |
| DWORD err; |
| ULONG_PTR compkey; |
| |
| memset(&oConnect, 0, sizeof(oConnect)); |
| memset(&oRead, 0, sizeof(oRead)); |
| memset(&oWrite, 0, sizeof(oWrite)); |
| |
| /* Wait for client to connect */ |
| trace("Server calling overlapped ConnectNamedPipe...\n"); |
| success = ConnectNamedPipe(hnp, &oConnect); |
| err = GetLastError(); |
| ok(!success && (err == ERROR_IO_PENDING || err == ERROR_PIPE_CONNECTED), |
| "overlapped ConnectNamedPipe got %u err %u\n", success, err ); |
| if (!success && err == ERROR_IO_PENDING) { |
| trace("ConnectNamedPipe GetQueuedCompletionStatus\n"); |
| success = GetQueuedCompletionStatus(hcompletion, &dummy, &compkey, &oResult, 0); |
| if (!success) |
| { |
| ok( GetLastError() == WAIT_TIMEOUT, |
| "ConnectNamedPipe GetQueuedCompletionStatus wrong error %u\n", GetLastError()); |
| success = GetQueuedCompletionStatus(hcompletion, &dummy, &compkey, &oResult, 10000); |
| } |
| ok(success, "ConnectNamedPipe GetQueuedCompletionStatus failed, errno=%i\n", GetLastError()); |
| if (success) |
| { |
| ok(compkey == 12345, "got completion key %i instead of 12345\n", (int)compkey); |
| ok(oResult == &oConnect, "got overlapped pointer %p instead of %p\n", oResult, &oConnect); |
| } |
| } |
| trace("overlapped ConnectNamedPipe operation complete.\n"); |
| |
| /* Echo bytes once */ |
| memset(buf, 0, sizeof(buf)); |
| |
| trace("Server reading...\n"); |
| success = ReadFile(hnp, buf, sizeof(buf), &readden, &oRead); |
| trace("Server ReadFile returned...\n"); |
| err = GetLastError(); |
| ok(success || err == ERROR_IO_PENDING, "overlapped ReadFile, err=%i\n", err); |
| success = GetQueuedCompletionStatus(hcompletion, &readden, &compkey, |
| &oResult, 10000); |
| ok(success, "ReadFile GetQueuedCompletionStatus failed, errno=%i\n", GetLastError()); |
| if (success) |
| { |
| ok(compkey == 12345, "got completion key %i instead of 12345\n", (int)compkey); |
| ok(oResult == &oRead, "got overlapped pointer %p instead of %p\n", oResult, &oRead); |
| } |
| trace("Server done reading.\n"); |
| |
| trace("Server writing...\n"); |
| success = WriteFile(hnp, buf, readden, &written, &oWrite); |
| trace("Server WriteFile returned...\n"); |
| err = GetLastError(); |
| ok(success || err == ERROR_IO_PENDING, "overlapped WriteFile failed, err=%u\n", err); |
| success = GetQueuedCompletionStatus(hcompletion, &written, &compkey, |
| &oResult, 10000); |
| ok(success, "WriteFile GetQueuedCompletionStatus failed, errno=%i\n", GetLastError()); |
| if (success) |
| { |
| ok(compkey == 12345, "got completion key %i instead of 12345\n", (int)compkey); |
| ok(oResult == &oWrite, "got overlapped pointer %p instead of %p\n", oResult, &oWrite); |
| ok(written == readden, "write file len\n"); |
| } |
| trace("Server done writing.\n"); |
| |
| /* finish this connection, wait for next one */ |
| ok(FlushFileBuffers(hnp), "FlushFileBuffers\n"); |
| success = DisconnectNamedPipe(hnp); |
| ok(success, "DisconnectNamedPipe failed, err %u\n", GetLastError()); |
| } |
| |
| ret = CloseHandle(hnp); |
| ok(ret, "CloseHandle named pipe failed, err=%i\n", GetLastError()); |
| ret = CloseHandle(hcompletion); |
| ok(ret, "CloseHandle completion failed, err=%i\n", GetLastError()); |
| |
| return 0; |
| } |
| |
| static int completion_called; |
| static DWORD completion_errorcode; |
| static DWORD completion_num_bytes; |
| static LPOVERLAPPED completion_lpoverlapped; |
| |
| static VOID WINAPI completion_routine(DWORD errorcode, DWORD num_bytes, LPOVERLAPPED lpoverlapped) |
| { |
| completion_called++; |
| completion_errorcode = errorcode; |
| completion_num_bytes = num_bytes; |
| completion_lpoverlapped = lpoverlapped; |
| SetEvent(lpoverlapped->hEvent); |
| } |
| |
| /** Trivial byte echo server - uses ReadFileEx/WriteFileEx */ |
| static DWORD CALLBACK serverThreadMain5(LPVOID arg) |
| { |
| int i; |
| HANDLE hEvent; |
| |
| trace("serverThreadMain5\n"); |
| /* Set up a simple echo server */ |
| hnp = CreateNamedPipe(PIPENAME "serverThreadMain5", PIPE_ACCESS_DUPLEX | FILE_FLAG_OVERLAPPED, |
| PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(hnp != INVALID_HANDLE_VALUE, "CreateNamedPipe failed\n"); |
| |
| hEvent = CreateEvent(NULL, /* security attribute */ |
| TRUE, /* manual reset event */ |
| FALSE, /* initial state */ |
| NULL); /* name */ |
| ok(hEvent != NULL, "CreateEvent\n"); |
| |
| for (i = 0; i < NB_SERVER_LOOPS; i++) { |
| char buf[512]; |
| DWORD readden; |
| DWORD success; |
| OVERLAPPED oOverlap; |
| DWORD err; |
| |
| memset(&oOverlap, 0, sizeof(oOverlap)); |
| oOverlap.hEvent = hEvent; |
| |
| /* Wait for client to connect */ |
| trace("Server calling ConnectNamedPipe...\n"); |
| success = ConnectNamedPipe(hnp, NULL); |
| err = GetLastError(); |
| ok(success || (err == ERROR_PIPE_CONNECTED), "ConnectNamedPipe failed: %d\n", err); |
| trace("ConnectNamedPipe operation complete.\n"); |
| |
| /* Echo bytes once */ |
| memset(buf, 0, sizeof(buf)); |
| |
| trace("Server reading...\n"); |
| completion_called = 0; |
| ResetEvent(hEvent); |
| success = ReadFileEx(hnp, buf, sizeof(buf), &oOverlap, completion_routine); |
| trace("Server ReadFileEx returned...\n"); |
| ok(success, "ReadFileEx failed, err=%i\n", GetLastError()); |
| ok(completion_called == 0, "completion routine called before ReadFileEx return\n"); |
| trace("ReadFileEx returned.\n"); |
| if (success) { |
| DWORD ret; |
| do { |
| ret = WaitForSingleObjectEx(hEvent, INFINITE, TRUE); |
| } while (ret == WAIT_IO_COMPLETION); |
| ok(ret == 0, "wait ReadFileEx returned %x\n", ret); |
| } |
| ok(completion_called == 1, "completion routine called %i times\n", completion_called); |
| ok(completion_errorcode == ERROR_SUCCESS, "completion routine got error %d\n", completion_errorcode); |
| ok(completion_num_bytes != 0, "read 0 bytes\n"); |
| ok(completion_lpoverlapped == &oOverlap, "got wrong overlapped pointer %p\n", completion_lpoverlapped); |
| readden = completion_num_bytes; |
| trace("Server done reading.\n"); |
| |
| trace("Server writing...\n"); |
| completion_called = 0; |
| ResetEvent(hEvent); |
| success = WriteFileEx(hnp, buf, readden, &oOverlap, completion_routine); |
| trace("Server WriteFileEx returned...\n"); |
| ok(success, "WriteFileEx failed, err=%i\n", GetLastError()); |
| ok(completion_called == 0, "completion routine called before ReadFileEx return\n"); |
| trace("overlapped WriteFile returned.\n"); |
| if (success) { |
| DWORD ret; |
| do { |
| ret = WaitForSingleObjectEx(hEvent, INFINITE, TRUE); |
| } while (ret == WAIT_IO_COMPLETION); |
| ok(ret == 0, "wait WriteFileEx returned %x\n", ret); |
| } |
| trace("Server done writing.\n"); |
| ok(completion_called == 1, "completion routine called %i times\n", completion_called); |
| ok(completion_errorcode == ERROR_SUCCESS, "completion routine got error %d\n", completion_errorcode); |
| ok(completion_num_bytes == readden, "read %i bytes wrote %i\n", readden, completion_num_bytes); |
| ok(completion_lpoverlapped == &oOverlap, "got wrong overlapped pointer %p\n", completion_lpoverlapped); |
| |
| /* finish this connection, wait for next one */ |
| ok(FlushFileBuffers(hnp), "FlushFileBuffers\n"); |
| ok(DisconnectNamedPipe(hnp), "DisconnectNamedPipe\n"); |
| } |
| return 0; |
| } |
| |
| static void exercizeServer(const char *pipename, HANDLE serverThread) |
| { |
| int i; |
| |
| trace("exercizeServer starting\n"); |
| for (i = 0; i < NB_SERVER_LOOPS; i++) { |
| HANDLE hFile=INVALID_HANDLE_VALUE; |
| static const char obuf[] = "Bit Bucket"; |
| char ibuf[32]; |
| DWORD written; |
| DWORD readden; |
| int loop; |
| |
| for (loop = 0; loop < 3; loop++) { |
| DWORD err; |
| trace("Client connecting...\n"); |
| /* Connect to the server */ |
| hFile = CreateFileA(pipename, GENERIC_READ | GENERIC_WRITE, 0, |
| NULL, OPEN_EXISTING, 0, 0); |
| if (hFile != INVALID_HANDLE_VALUE) |
| break; |
| err = GetLastError(); |
| if (loop == 0) |
| ok(err == ERROR_PIPE_BUSY || err == ERROR_FILE_NOT_FOUND, "connecting to pipe\n"); |
| else |
| ok(err == ERROR_PIPE_BUSY, "connecting to pipe\n"); |
| trace("connect failed, retrying\n"); |
| Sleep(200); |
| } |
| ok(hFile != INVALID_HANDLE_VALUE, "client opening named pipe\n"); |
| |
| /* Make sure it can echo */ |
| memset(ibuf, 0, sizeof(ibuf)); |
| trace("Client writing...\n"); |
| ok(WriteFile(hFile, obuf, sizeof(obuf), &written, NULL), "WriteFile to client end of pipe\n"); |
| ok(written == sizeof(obuf), "write file len\n"); |
| trace("Client reading...\n"); |
| ok(ReadFile(hFile, ibuf, sizeof(obuf), &readden, NULL), "ReadFile from client end of pipe\n"); |
| ok(readden == sizeof(obuf), "read file len\n"); |
| ok(memcmp(obuf, ibuf, written) == 0, "content check\n"); |
| |
| trace("Client closing...\n"); |
| ok(CloseHandle(hFile), "CloseHandle\n"); |
| } |
| |
| ok(WaitForSingleObject(serverThread,INFINITE) == WAIT_OBJECT_0, "WaitForSingleObject\n"); |
| CloseHandle(hnp); |
| trace("exercizeServer returning\n"); |
| } |
| |
| static void test_NamedPipe_2(void) |
| { |
| HANDLE serverThread; |
| DWORD serverThreadId; |
| HANDLE alarmThread; |
| DWORD alarmThreadId; |
| |
| trace("test_NamedPipe_2 starting\n"); |
| /* Set up a twenty second timeout */ |
| alarm_event = CreateEvent( NULL, TRUE, FALSE, NULL ); |
| SetLastError(0xdeadbeef); |
| alarmThread = CreateThread(NULL, 0, alarmThreadMain, (void *) 20000, 0, &alarmThreadId); |
| ok(alarmThread != NULL, "CreateThread failed: %d\n", GetLastError()); |
| |
| /* The servers we're about to exercise do try to clean up carefully, |
| * but to reduce the chance of a test failure due to a pipe handle |
| * leak in the test code, we'll use a different pipe name for each server. |
| */ |
| |
| /* Try server #1 */ |
| SetLastError(0xdeadbeef); |
| serverThread = CreateThread(NULL, 0, serverThreadMain1, (void *)8, 0, &serverThreadId); |
| ok(serverThread != NULL, "CreateThread failed: %d\n", GetLastError()); |
| exercizeServer(PIPENAME "serverThreadMain1", serverThread); |
| |
| /* Try server #2 */ |
| SetLastError(0xdeadbeef); |
| serverThread = CreateThread(NULL, 0, serverThreadMain2, 0, 0, &serverThreadId); |
| ok(serverThread != NULL, "CreateThread failed: %d\n", GetLastError()); |
| exercizeServer(PIPENAME "serverThreadMain2", serverThread); |
| |
| /* Try server #3 */ |
| SetLastError(0xdeadbeef); |
| serverThread = CreateThread(NULL, 0, serverThreadMain3, 0, 0, &serverThreadId); |
| ok(serverThread != NULL, "CreateThread failed: %d\n", GetLastError()); |
| exercizeServer(PIPENAME "serverThreadMain3", serverThread); |
| |
| /* Try server #4 */ |
| SetLastError(0xdeadbeef); |
| serverThread = CreateThread(NULL, 0, serverThreadMain4, 0, 0, &serverThreadId); |
| ok(serverThread != NULL, "CreateThread failed: %d\n", GetLastError()); |
| exercizeServer(PIPENAME "serverThreadMain4", serverThread); |
| |
| /* Try server #5 */ |
| SetLastError(0xdeadbeef); |
| serverThread = CreateThread(NULL, 0, serverThreadMain5, 0, 0, &serverThreadId); |
| ok(serverThread != NULL, "CreateThread failed: %d\n", GetLastError()); |
| exercizeServer(PIPENAME "serverThreadMain5", serverThread); |
| |
| ok(SetEvent( alarm_event ), "SetEvent\n"); |
| CloseHandle( alarm_event ); |
| trace("test_NamedPipe_2 returning\n"); |
| } |
| |
| static int test_DisconnectNamedPipe(void) |
| { |
| HANDLE hnp; |
| HANDLE hFile; |
| static const char obuf[] = "Bit Bucket"; |
| char ibuf[32]; |
| DWORD written; |
| DWORD readden; |
| DWORD ret; |
| |
| SetLastError(0xdeadbeef); |
| hnp = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| if ((hnp == INVALID_HANDLE_VALUE /* Win98 */ || !hnp /* Win95 */) |
| && GetLastError() == ERROR_CALL_NOT_IMPLEMENTED) { |
| |
| win_skip("Named pipes are not implemented\n"); |
| return 1; |
| } |
| |
| ok(WriteFile(hnp, obuf, sizeof(obuf), &written, NULL) == 0 |
| && GetLastError() == ERROR_PIPE_LISTENING, "WriteFile to not-yet-connected pipe\n"); |
| ok(ReadFile(hnp, ibuf, sizeof(ibuf), &readden, NULL) == 0 |
| && GetLastError() == ERROR_PIPE_LISTENING, "ReadFile from not-yet-connected pipe\n"); |
| |
| hFile = CreateFileA(PIPENAME, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, 0); |
| ok(hFile != INVALID_HANDLE_VALUE, "CreateFile failed\n"); |
| |
| /* don't try to do i/o if one side couldn't be opened, as it hangs */ |
| if (hFile != INVALID_HANDLE_VALUE) { |
| |
| /* see what happens if server calls DisconnectNamedPipe |
| * when there are bytes in the pipe |
| */ |
| |
| ok(WriteFile(hFile, obuf, sizeof(obuf), &written, NULL), "WriteFile\n"); |
| ok(written == sizeof(obuf), "write file len\n"); |
| ok(DisconnectNamedPipe(hnp), "DisconnectNamedPipe while messages waiting\n"); |
| ok(WriteFile(hFile, obuf, sizeof(obuf), &written, NULL) == 0 |
| && GetLastError() == ERROR_PIPE_NOT_CONNECTED, "WriteFile to disconnected pipe\n"); |
| ok(ReadFile(hnp, ibuf, sizeof(ibuf), &readden, NULL) == 0 |
| && GetLastError() == ERROR_PIPE_NOT_CONNECTED, |
| "ReadFile from disconnected pipe with bytes waiting\n"); |
| ok(!DisconnectNamedPipe(hnp) && GetLastError() == ERROR_PIPE_NOT_CONNECTED, |
| "DisconnectNamedPipe worked twice\n"); |
| ret = WaitForSingleObject(hFile, 0); |
| ok(ret == WAIT_TIMEOUT, "WaitForSingleObject returned %X\n", ret); |
| ok(CloseHandle(hFile), "CloseHandle\n"); |
| } |
| |
| ok(CloseHandle(hnp), "CloseHandle\n"); |
| |
| return 0; |
| } |
| static void test_CreatePipe(void) |
| { |
| SECURITY_ATTRIBUTES pipe_attr; |
| HANDLE piperead, pipewrite; |
| DWORD written; |
| DWORD read; |
| DWORD i, size; |
| BYTE *buffer; |
| char readbuf[32]; |
| |
| user_apc_ran = FALSE; |
| if (pQueueUserAPC) |
| ok(pQueueUserAPC(user_apc, GetCurrentThread(), 0), "couldn't create user apc\n"); |
| |
| pipe_attr.nLength = sizeof(SECURITY_ATTRIBUTES); |
| pipe_attr.bInheritHandle = TRUE; |
| pipe_attr.lpSecurityDescriptor = NULL; |
| ok(CreatePipe(&piperead, &pipewrite, &pipe_attr, 0) != 0, "CreatePipe failed\n"); |
| ok(WriteFile(pipewrite,PIPENAME,sizeof(PIPENAME), &written, NULL), "Write to anonymous pipe failed\n"); |
| ok(written == sizeof(PIPENAME), "Write to anonymous pipe wrote %d bytes\n", written); |
| ok(ReadFile(piperead,readbuf,sizeof(readbuf),&read, NULL), "Read from non empty pipe failed\n"); |
| ok(read == sizeof(PIPENAME), "Read from anonymous pipe got %d bytes\n", read); |
| ok(CloseHandle(pipewrite), "CloseHandle for the write pipe failed\n"); |
| ok(CloseHandle(piperead), "CloseHandle for the read pipe failed\n"); |
| |
| /* Now write another chunk*/ |
| ok(CreatePipe(&piperead, &pipewrite, &pipe_attr, 0) != 0, "CreatePipe failed\n"); |
| ok(WriteFile(pipewrite,PIPENAME,sizeof(PIPENAME), &written, NULL), "Write to anonymous pipe failed\n"); |
| ok(written == sizeof(PIPENAME), "Write to anonymous pipe wrote %d bytes\n", written); |
| /* and close the write end, read should still succeed*/ |
| ok(CloseHandle(pipewrite), "CloseHandle for the Write Pipe failed\n"); |
| ok(ReadFile(piperead,readbuf,sizeof(readbuf),&read, NULL), "Read from broken pipe withe with pending data failed\n"); |
| ok(read == sizeof(PIPENAME), "Read from anonymous pipe got %d bytes\n", read); |
| /* But now we need to get informed that the pipe is closed */ |
| ok(ReadFile(piperead,readbuf,sizeof(readbuf),&read, NULL) == 0, "Broken pipe not detected\n"); |
| ok(CloseHandle(piperead), "CloseHandle for the read pipe failed\n"); |
| |
| /* Try bigger chunks */ |
| size = 32768; |
| buffer = HeapAlloc( GetProcessHeap(), 0, size ); |
| for (i = 0; i < size; i++) buffer[i] = i; |
| ok(CreatePipe(&piperead, &pipewrite, &pipe_attr, (size + 24)) != 0, "CreatePipe failed\n"); |
| ok(WriteFile(pipewrite, buffer, size, &written, NULL), "Write to anonymous pipe failed\n"); |
| ok(written == size, "Write to anonymous pipe wrote %d bytes\n", written); |
| /* and close the write end, read should still succeed*/ |
| ok(CloseHandle(pipewrite), "CloseHandle for the Write Pipe failed\n"); |
| memset( buffer, 0, size ); |
| ok(ReadFile(piperead, buffer, size, &read, NULL), "Read from broken pipe withe with pending data failed\n"); |
| ok(read == size, "Read from anonymous pipe got %d bytes\n", read); |
| for (i = 0; i < size; i++) ok( buffer[i] == (BYTE)i, "invalid data %x at %x\n", buffer[i], i ); |
| /* But now we need to get informed that the pipe is closed */ |
| ok(ReadFile(piperead,readbuf,sizeof(readbuf),&read, NULL) == 0, "Broken pipe not detected\n"); |
| ok(CloseHandle(piperead), "CloseHandle for the read pipe failed\n"); |
| HeapFree(GetProcessHeap(), 0, buffer); |
| |
| ok(user_apc_ran == FALSE, "user apc ran, pipe using alertable io mode\n"); |
| SleepEx(0, TRUE); /* get rid of apc */ |
| } |
| |
| struct named_pipe_client_params |
| { |
| DWORD security_flags; |
| HANDLE token; |
| BOOL revert; |
| }; |
| |
| #define PIPE_NAME "\\\\.\\pipe\\named_pipe_test" |
| |
| static DWORD CALLBACK named_pipe_client_func(LPVOID p) |
| { |
| struct named_pipe_client_params *params = p; |
| HANDLE pipe; |
| BOOL ret; |
| const char message[] = "Test"; |
| DWORD bytes_read, bytes_written; |
| char dummy; |
| TOKEN_PRIVILEGES *Privileges = NULL; |
| |
| if (params->token) |
| { |
| if (params->revert) |
| { |
| /* modify the token so we can tell if the pipe impersonation |
| * token reverts to the process token */ |
| ret = AdjustTokenPrivileges(params->token, TRUE, NULL, 0, NULL, NULL); |
| ok(ret, "AdjustTokenPrivileges failed with error %d\n", GetLastError()); |
| } |
| ret = SetThreadToken(NULL, params->token); |
| ok(ret, "SetThreadToken failed with error %d\n", GetLastError()); |
| } |
| else |
| { |
| DWORD Size = 0; |
| HANDLE process_token; |
| |
| ret = OpenProcessToken(GetCurrentProcess(), TOKEN_QUERY|TOKEN_ADJUST_PRIVILEGES, &process_token); |
| ok(ret, "OpenProcessToken failed with error %d\n", GetLastError()); |
| |
| ret = GetTokenInformation(process_token, TokenPrivileges, NULL, 0, &Size); |
| ok(!ret && GetLastError() == ERROR_INSUFFICIENT_BUFFER, "GetTokenInformation(TokenPrivileges) failed with %d\n", GetLastError()); |
| Privileges = HeapAlloc(GetProcessHeap(), 0, Size); |
| ret = GetTokenInformation(process_token, TokenPrivileges, Privileges, Size, &Size); |
| ok(ret, "GetTokenInformation(TokenPrivileges) failed with %d\n", GetLastError()); |
| |
| ret = AdjustTokenPrivileges(process_token, TRUE, NULL, 0, NULL, NULL); |
| ok(ret, "AdjustTokenPrivileges failed with error %d\n", GetLastError()); |
| |
| CloseHandle(process_token); |
| } |
| |
| pipe = CreateFile(PIPE_NAME, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, params->security_flags, NULL); |
| ok(pipe != INVALID_HANDLE_VALUE, "CreateFile for pipe failed with error %d\n", GetLastError()); |
| |
| ret = WriteFile(pipe, message, sizeof(message), &bytes_written, NULL); |
| ok(ret, "WriteFile failed with error %d\n", GetLastError()); |
| |
| ret = ReadFile(pipe, &dummy, sizeof(dummy), &bytes_read, NULL); |
| ok(ret, "ReadFile failed with error %d\n", GetLastError()); |
| |
| if (params->token) |
| { |
| if (params->revert) |
| { |
| ret = RevertToSelf(); |
| ok(ret, "RevertToSelf failed with error %d\n", GetLastError()); |
| } |
| else |
| { |
| ret = AdjustTokenPrivileges(params->token, TRUE, NULL, 0, NULL, NULL); |
| ok(ret, "AdjustTokenPrivileges failed with error %d\n", GetLastError()); |
| } |
| } |
| else |
| { |
| HANDLE process_token; |
| |
| ret = OpenProcessToken(GetCurrentProcess(), TOKEN_ADJUST_PRIVILEGES, &process_token); |
| ok(ret, "OpenProcessToken failed with error %d\n", GetLastError()); |
| |
| ret = AdjustTokenPrivileges(process_token, FALSE, Privileges, 0, NULL, NULL); |
| ok(ret, "AdjustTokenPrivileges failed with error %d\n", GetLastError()); |
| |
| HeapFree(GetProcessHeap(), 0, Privileges); |
| |
| CloseHandle(process_token); |
| } |
| |
| ret = WriteFile(pipe, message, sizeof(message), &bytes_written, NULL); |
| ok(ret, "WriteFile failed with error %d\n", GetLastError()); |
| |
| ret = ReadFile(pipe, &dummy, sizeof(dummy), &bytes_read, NULL); |
| ok(ret, "ReadFile failed with error %d\n", GetLastError()); |
| |
| CloseHandle(pipe); |
| |
| return 0; |
| } |
| |
| static HANDLE make_impersonation_token(DWORD Access, SECURITY_IMPERSONATION_LEVEL ImpersonationLevel) |
| { |
| HANDLE ProcessToken; |
| HANDLE Token = NULL; |
| BOOL ret; |
| |
| ret = OpenProcessToken(GetCurrentProcess(), TOKEN_DUPLICATE, &ProcessToken); |
| ok(ret, "OpenProcessToken failed with error %d\n", GetLastError()); |
| |
| ret = pDuplicateTokenEx(ProcessToken, Access, NULL, ImpersonationLevel, TokenImpersonation, &Token); |
| ok(ret, "DuplicateToken failed with error %d\n", GetLastError()); |
| |
| CloseHandle(ProcessToken); |
| |
| return Token; |
| } |
| |
| static void test_ImpersonateNamedPipeClient(HANDLE hClientToken, DWORD security_flags, BOOL revert, void (*test_func)(int, HANDLE)) |
| { |
| HANDLE hPipeServer; |
| BOOL ret; |
| DWORD dwTid; |
| HANDLE hThread; |
| char buffer[256]; |
| DWORD dwBytesRead; |
| DWORD error; |
| struct named_pipe_client_params params; |
| char dummy = 0; |
| DWORD dwBytesWritten; |
| HANDLE hToken = NULL; |
| SECURITY_IMPERSONATION_LEVEL ImpersonationLevel; |
| DWORD size; |
| |
| hPipeServer = CreateNamedPipe(PIPE_NAME, PIPE_ACCESS_DUPLEX, PIPE_TYPE_BYTE | PIPE_READMODE_BYTE | PIPE_WAIT, 1, 100, 100, NMPWAIT_USE_DEFAULT_WAIT, NULL); |
| ok(hPipeServer != INVALID_HANDLE_VALUE, "CreateNamedPipe failed with error %d\n", GetLastError()); |
| |
| params.security_flags = security_flags; |
| params.token = hClientToken; |
| params.revert = revert; |
| hThread = CreateThread(NULL, 0, named_pipe_client_func, ¶ms, 0, &dwTid); |
| ok(hThread != NULL, "CreateThread failed with error %d\n", GetLastError()); |
| |
| SetLastError(0xdeadbeef); |
| ret = ImpersonateNamedPipeClient(hPipeServer); |
| error = GetLastError(); |
| ok(ret /* win2k3 */ || (error == ERROR_CANNOT_IMPERSONATE), |
| "ImpersonateNamedPipeClient should have failed with ERROR_CANNOT_IMPERSONATE instead of %d\n", GetLastError()); |
| |
| ret = ConnectNamedPipe(hPipeServer, NULL); |
| ok(ret || (GetLastError() == ERROR_PIPE_CONNECTED), "ConnectNamedPipe failed with error %d\n", GetLastError()); |
| |
| ret = ReadFile(hPipeServer, buffer, sizeof(buffer), &dwBytesRead, NULL); |
| ok(ret, "ReadFile failed with error %d\n", GetLastError()); |
| |
| ret = ImpersonateNamedPipeClient(hPipeServer); |
| ok(ret, "ImpersonateNamedPipeClient failed with error %d\n", GetLastError()); |
| |
| ret = OpenThreadToken(GetCurrentThread(), TOKEN_QUERY, FALSE, &hToken); |
| ok(ret, "OpenThreadToken failed with error %d\n", GetLastError()); |
| |
| (*test_func)(0, hToken); |
| |
| ImpersonationLevel = 0xdeadbeef; /* to avoid false positives */ |
| ret = GetTokenInformation(hToken, TokenImpersonationLevel, &ImpersonationLevel, sizeof(ImpersonationLevel), &size); |
| ok(ret, "GetTokenInformation(TokenImpersonationLevel) failed with error %d\n", GetLastError()); |
| ok(ImpersonationLevel == SecurityImpersonation, "ImpersonationLevel should have been SecurityImpersonation(%d) instead of %d\n", SecurityImpersonation, ImpersonationLevel); |
| |
| CloseHandle(hToken); |
| |
| RevertToSelf(); |
| |
| ret = WriteFile(hPipeServer, &dummy, sizeof(dummy), &dwBytesWritten, NULL); |
| ok(ret, "WriteFile failed with error %d\n", GetLastError()); |
| |
| ret = ReadFile(hPipeServer, buffer, sizeof(buffer), &dwBytesRead, NULL); |
| ok(ret, "ReadFile failed with error %d\n", GetLastError()); |
| |
| ret = ImpersonateNamedPipeClient(hPipeServer); |
| ok(ret, "ImpersonateNamedPipeClient failed with error %d\n", GetLastError()); |
| |
| ret = OpenThreadToken(GetCurrentThread(), TOKEN_QUERY, FALSE, &hToken); |
| ok(ret, "OpenThreadToken failed with error %d\n", GetLastError()); |
| |
| (*test_func)(1, hToken); |
| |
| CloseHandle(hToken); |
| |
| RevertToSelf(); |
| |
| ret = WriteFile(hPipeServer, &dummy, sizeof(dummy), &dwBytesWritten, NULL); |
| ok(ret, "WriteFile failed with error %d\n", GetLastError()); |
| |
| WaitForSingleObject(hThread, INFINITE); |
| |
| ret = ImpersonateNamedPipeClient(hPipeServer); |
| ok(ret, "ImpersonateNamedPipeClient failed with error %d\n", GetLastError()); |
| |
| RevertToSelf(); |
| |
| CloseHandle(hThread); |
| CloseHandle(hPipeServer); |
| } |
| |
| static BOOL are_all_privileges_disabled(HANDLE hToken) |
| { |
| BOOL ret; |
| TOKEN_PRIVILEGES *Privileges = NULL; |
| DWORD Size = 0; |
| BOOL all_privs_disabled = TRUE; |
| DWORD i; |
| |
| ret = GetTokenInformation(hToken, TokenPrivileges, NULL, 0, &Size); |
| if (!ret && GetLastError() == ERROR_INSUFFICIENT_BUFFER) |
| { |
| Privileges = HeapAlloc(GetProcessHeap(), 0, Size); |
| ret = GetTokenInformation(hToken, TokenPrivileges, Privileges, Size, &Size); |
| if (!ret) |
| { |
| HeapFree(GetProcessHeap(), 0, Privileges); |
| return FALSE; |
| } |
| } |
| else |
| return FALSE; |
| |
| for (i = 0; i < Privileges->PrivilegeCount; i++) |
| { |
| if (Privileges->Privileges[i].Attributes & SE_PRIVILEGE_ENABLED) |
| { |
| all_privs_disabled = FALSE; |
| break; |
| } |
| } |
| |
| HeapFree(GetProcessHeap(), 0, Privileges); |
| |
| return all_privs_disabled; |
| } |
| |
| static DWORD get_privilege_count(HANDLE hToken) |
| { |
| TOKEN_STATISTICS Statistics; |
| DWORD Size = sizeof(Statistics); |
| BOOL ret; |
| |
| ret = GetTokenInformation(hToken, TokenStatistics, &Statistics, Size, &Size); |
| ok(ret, "GetTokenInformation(TokenStatistics)\n"); |
| if (!ret) return -1; |
| |
| return Statistics.PrivilegeCount; |
| } |
| |
| static void test_no_sqos_no_token(int call_index, HANDLE hToken) |
| { |
| DWORD priv_count; |
| |
| switch (call_index) |
| { |
| case 0: |
| priv_count = get_privilege_count(hToken); |
| todo_wine |
| ok(priv_count == 0, "privilege count should have been 0 instead of %d\n", priv_count); |
| break; |
| case 1: |
| priv_count = get_privilege_count(hToken); |
| ok(priv_count > 0, "privilege count should now be > 0 instead of 0\n"); |
| ok(!are_all_privileges_disabled(hToken), "impersonated token should not have been modified\n"); |
| break; |
| default: |
| ok(0, "shouldn't happen\n"); |
| } |
| } |
| |
| static void test_no_sqos(int call_index, HANDLE hToken) |
| { |
| switch (call_index) |
| { |
| case 0: |
| ok(!are_all_privileges_disabled(hToken), "token should be a copy of the process one\n"); |
| break; |
| case 1: |
| todo_wine |
| ok(are_all_privileges_disabled(hToken), "impersonated token should have been modified\n"); |
| break; |
| default: |
| ok(0, "shouldn't happen\n"); |
| } |
| } |
| |
| static void test_static_context(int call_index, HANDLE hToken) |
| { |
| switch (call_index) |
| { |
| case 0: |
| ok(!are_all_privileges_disabled(hToken), "token should be a copy of the process one\n"); |
| break; |
| case 1: |
| ok(!are_all_privileges_disabled(hToken), "impersonated token should not have been modified\n"); |
| break; |
| default: |
| ok(0, "shouldn't happen\n"); |
| } |
| } |
| |
| static void test_dynamic_context(int call_index, HANDLE hToken) |
| { |
| switch (call_index) |
| { |
| case 0: |
| ok(!are_all_privileges_disabled(hToken), "token should be a copy of the process one\n"); |
| break; |
| case 1: |
| todo_wine |
| ok(are_all_privileges_disabled(hToken), "impersonated token should have been modified\n"); |
| break; |
| default: |
| ok(0, "shouldn't happen\n"); |
| } |
| } |
| |
| static void test_dynamic_context_no_token(int call_index, HANDLE hToken) |
| { |
| switch (call_index) |
| { |
| case 0: |
| ok(are_all_privileges_disabled(hToken), "token should be a copy of the process one\n"); |
| break; |
| case 1: |
| ok(!are_all_privileges_disabled(hToken), "process token modification should have been detected and impersonation token updated\n"); |
| break; |
| default: |
| ok(0, "shouldn't happen\n"); |
| } |
| } |
| |
| static void test_no_sqos_revert(int call_index, HANDLE hToken) |
| { |
| DWORD priv_count; |
| switch (call_index) |
| { |
| case 0: |
| priv_count = get_privilege_count(hToken); |
| todo_wine |
| ok(priv_count == 0, "privilege count should have been 0 instead of %d\n", priv_count); |
| break; |
| case 1: |
| priv_count = get_privilege_count(hToken); |
| ok(priv_count > 0, "privilege count should now be > 0 instead of 0\n"); |
| ok(!are_all_privileges_disabled(hToken), "impersonated token should not have been modified\n"); |
| break; |
| default: |
| ok(0, "shouldn't happen\n"); |
| } |
| } |
| |
| static void test_static_context_revert(int call_index, HANDLE hToken) |
| { |
| switch (call_index) |
| { |
| case 0: |
| todo_wine |
| ok(are_all_privileges_disabled(hToken), "privileges should have been disabled\n"); |
| break; |
| case 1: |
| todo_wine |
| ok(are_all_privileges_disabled(hToken), "impersonated token should not have been modified\n"); |
| break; |
| default: |
| ok(0, "shouldn't happen\n"); |
| } |
| } |
| |
| static void test_dynamic_context_revert(int call_index, HANDLE hToken) |
| { |
| switch (call_index) |
| { |
| case 0: |
| todo_wine |
| ok(are_all_privileges_disabled(hToken), "privileges should have been disabled\n"); |
| break; |
| case 1: |
| ok(!are_all_privileges_disabled(hToken), "impersonated token should now be process token\n"); |
| break; |
| default: |
| ok(0, "shouldn't happen\n"); |
| } |
| } |
| |
| static void test_impersonation(void) |
| { |
| HANDLE hClientToken; |
| HANDLE hProcessToken; |
| BOOL ret; |
| |
| if( !pDuplicateTokenEx ) { |
| skip("DuplicateTokenEx not found\n"); |
| return; |
| } |
| |
| ret = OpenProcessToken(GetCurrentProcess(), TOKEN_QUERY, &hProcessToken); |
| if (!ret) |
| { |
| skip("couldn't open process token, skipping impersonation tests\n"); |
| return; |
| } |
| |
| if (!get_privilege_count(hProcessToken) || are_all_privileges_disabled(hProcessToken)) |
| { |
| skip("token didn't have any privileges or they were all disabled. token not suitable for impersonation tests\n"); |
| CloseHandle(hProcessToken); |
| return; |
| } |
| CloseHandle(hProcessToken); |
| |
| test_ImpersonateNamedPipeClient(NULL, 0, FALSE, test_no_sqos_no_token); |
| hClientToken = make_impersonation_token(TOKEN_IMPERSONATE | TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, SecurityImpersonation); |
| test_ImpersonateNamedPipeClient(hClientToken, 0, FALSE, test_no_sqos); |
| CloseHandle(hClientToken); |
| hClientToken = make_impersonation_token(TOKEN_IMPERSONATE | TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, SecurityImpersonation); |
| test_ImpersonateNamedPipeClient(hClientToken, |
| SECURITY_SQOS_PRESENT | SECURITY_IMPERSONATION, FALSE, |
| test_static_context); |
| CloseHandle(hClientToken); |
| hClientToken = make_impersonation_token(TOKEN_IMPERSONATE | TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, SecurityImpersonation); |
| test_ImpersonateNamedPipeClient(hClientToken, |
| SECURITY_SQOS_PRESENT | SECURITY_CONTEXT_TRACKING | SECURITY_IMPERSONATION, |
| FALSE, test_dynamic_context); |
| CloseHandle(hClientToken); |
| test_ImpersonateNamedPipeClient(NULL, |
| SECURITY_SQOS_PRESENT | SECURITY_CONTEXT_TRACKING | SECURITY_IMPERSONATION, |
| FALSE, test_dynamic_context_no_token); |
| |
| hClientToken = make_impersonation_token(TOKEN_IMPERSONATE | TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, SecurityImpersonation); |
| test_ImpersonateNamedPipeClient(hClientToken, 0, TRUE, test_no_sqos_revert); |
| CloseHandle(hClientToken); |
| hClientToken = make_impersonation_token(TOKEN_IMPERSONATE | TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, SecurityImpersonation); |
| test_ImpersonateNamedPipeClient(hClientToken, |
| SECURITY_SQOS_PRESENT | SECURITY_IMPERSONATION, TRUE, |
| test_static_context_revert); |
| CloseHandle(hClientToken); |
| hClientToken = make_impersonation_token(TOKEN_IMPERSONATE | TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, SecurityImpersonation); |
| test_ImpersonateNamedPipeClient(hClientToken, |
| SECURITY_SQOS_PRESENT | SECURITY_CONTEXT_TRACKING | SECURITY_IMPERSONATION, |
| TRUE, test_dynamic_context_revert); |
| CloseHandle(hClientToken); |
| } |
| |
| struct overlapped_server_args |
| { |
| HANDLE pipe_created; |
| }; |
| |
| static DWORD CALLBACK overlapped_server(LPVOID arg) |
| { |
| OVERLAPPED ol; |
| HANDLE pipe; |
| int ret, err; |
| struct overlapped_server_args *a = arg; |
| DWORD num; |
| char buf[100]; |
| |
| pipe = CreateNamedPipeA("\\\\.\\pipe\\my pipe", FILE_FLAG_OVERLAPPED | PIPE_ACCESS_DUPLEX, PIPE_TYPE_MESSAGE | PIPE_READMODE_MESSAGE, 1, 0, 0, 100000, NULL); |
| ok(pipe != NULL, "pipe NULL\n"); |
| |
| ol.hEvent = CreateEventA(0, 1, 0, 0); |
| ok(ol.hEvent != NULL, "event NULL\n"); |
| ret = ConnectNamedPipe(pipe, &ol); |
| err = GetLastError(); |
| ok(ret == 0, "ret %d\n", ret); |
| ok(err == ERROR_IO_PENDING, "gle %d\n", err); |
| SetEvent(a->pipe_created); |
| |
| ret = WaitForSingleObjectEx(ol.hEvent, INFINITE, 1); |
| ok(ret == WAIT_OBJECT_0, "ret %x\n", ret); |
| |
| ret = GetOverlappedResult(pipe, &ol, &num, 1); |
| ok(ret == 1, "ret %d\n", ret); |
| |
| /* This should block */ |
| ret = ReadFile(pipe, buf, sizeof(buf), &num, NULL); |
| ok(ret == 1, "ret %d\n", ret); |
| |
| DisconnectNamedPipe(pipe); |
| CloseHandle(ol.hEvent); |
| CloseHandle(pipe); |
| return 1; |
| } |
| |
| static void test_overlapped(void) |
| { |
| DWORD tid, num; |
| HANDLE thread, pipe; |
| BOOL ret; |
| struct overlapped_server_args args; |
| |
| args.pipe_created = CreateEventA(0, 1, 0, 0); |
| thread = CreateThread(NULL, 0, overlapped_server, &args, 0, &tid); |
| |
| WaitForSingleObject(args.pipe_created, INFINITE); |
| pipe = CreateFileA("\\\\.\\pipe\\my pipe", GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL); |
| ok(pipe != INVALID_HANDLE_VALUE, "cf failed\n"); |
| |
| /* Sleep to try to get the ReadFile in the server to occur before the following WriteFile */ |
| Sleep(1); |
| |
| ret = WriteFile(pipe, "x", 1, &num, NULL); |
| ok(ret, "WriteFile failed with error %d\n", GetLastError()); |
| |
| WaitForSingleObject(thread, INFINITE); |
| CloseHandle(pipe); |
| CloseHandle(args.pipe_created); |
| CloseHandle(thread); |
| } |
| |
| static void test_NamedPipeHandleState(void) |
| { |
| HANDLE server, client; |
| BOOL ret; |
| DWORD state, instances, maxCollectionCount, collectDataTimeout; |
| char userName[MAX_PATH]; |
| |
| server = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, |
| /* dwOpenMode */ PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(server != INVALID_HANDLE_VALUE, "cf failed\n"); |
| ret = GetNamedPipeHandleState(server, NULL, NULL, NULL, NULL, NULL, 0); |
| todo_wine |
| ok(ret, "GetNamedPipeHandleState failed: %d\n", GetLastError()); |
| ret = GetNamedPipeHandleState(server, &state, &instances, NULL, NULL, NULL, |
| 0); |
| todo_wine |
| ok(ret, "GetNamedPipeHandleState failed: %d\n", GetLastError()); |
| if (ret) |
| { |
| ok(state == 0, "unexpected state %08x\n", state); |
| ok(instances == 1, "expected 1 instances, got %d\n", instances); |
| } |
| /* Some parameters have no meaning, and therefore can't be retrieved, |
| * on a local pipe. |
| */ |
| SetLastError(0xdeadbeef); |
| ret = GetNamedPipeHandleState(server, &state, &instances, |
| &maxCollectionCount, &collectDataTimeout, userName, |
| sizeof(userName) / sizeof(userName[0])); |
| todo_wine |
| ok(!ret && GetLastError() == ERROR_INVALID_PARAMETER, |
| "expected ERROR_INVALID_PARAMETER, got %d\n", GetLastError()); |
| /* A byte-mode pipe server can't be changed to message mode. */ |
| state = PIPE_READMODE_MESSAGE; |
| SetLastError(0xdeadbeef); |
| ret = SetNamedPipeHandleState(server, &state, NULL, NULL); |
| todo_wine |
| ok(!ret && GetLastError() == ERROR_INVALID_PARAMETER, |
| "expected ERROR_INVALID_PARAMETER, got %d\n", GetLastError()); |
| |
| client = CreateFileA(PIPENAME, GENERIC_READ|GENERIC_WRITE, 0, NULL, |
| OPEN_EXISTING, 0, NULL); |
| ok(client != INVALID_HANDLE_VALUE, "cf failed\n"); |
| |
| state = PIPE_READMODE_BYTE; |
| ret = SetNamedPipeHandleState(client, &state, NULL, NULL); |
| todo_wine |
| ok(ret, "SetNamedPipeHandleState failed: %d\n", GetLastError()); |
| /* A byte-mode pipe client can't be changed to message mode, either. */ |
| state = PIPE_READMODE_MESSAGE; |
| SetLastError(0xdeadbeef); |
| ret = SetNamedPipeHandleState(server, &state, NULL, NULL); |
| todo_wine |
| ok(!ret && GetLastError() == ERROR_INVALID_PARAMETER, |
| "expected ERROR_INVALID_PARAMETER, got %d\n", GetLastError()); |
| |
| CloseHandle(client); |
| CloseHandle(server); |
| |
| server = CreateNamedPipe(PIPENAME, PIPE_ACCESS_DUPLEX, |
| /* dwOpenMode */ PIPE_TYPE_MESSAGE | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(server != INVALID_HANDLE_VALUE, "cf failed\n"); |
| ret = GetNamedPipeHandleState(server, NULL, NULL, NULL, NULL, NULL, 0); |
| todo_wine |
| ok(ret, "GetNamedPipeHandleState failed: %d\n", GetLastError()); |
| ret = GetNamedPipeHandleState(server, &state, &instances, NULL, NULL, NULL, |
| 0); |
| todo_wine |
| ok(ret, "GetNamedPipeHandleState failed: %d\n", GetLastError()); |
| if (ret) |
| { |
| ok(state == 0, "unexpected state %08x\n", state); |
| ok(instances == 1, "expected 1 instances, got %d\n", instances); |
| } |
| /* In contrast to byte-mode pipes, a message-mode pipe server can be |
| * changed to byte mode. |
| */ |
| state = PIPE_READMODE_BYTE; |
| ret = SetNamedPipeHandleState(server, &state, NULL, NULL); |
| todo_wine |
| ok(ret, "SetNamedPipeHandleState failed: %d\n", GetLastError()); |
| |
| client = CreateFileA(PIPENAME, GENERIC_READ|GENERIC_WRITE, 0, NULL, |
| OPEN_EXISTING, 0, NULL); |
| ok(client != INVALID_HANDLE_VALUE, "cf failed\n"); |
| |
| state = PIPE_READMODE_MESSAGE; |
| ret = SetNamedPipeHandleState(client, &state, NULL, NULL); |
| todo_wine |
| ok(ret, "SetNamedPipeHandleState failed: %d\n", GetLastError()); |
| /* A message-mode pipe client can also be changed to byte mode. |
| */ |
| state = PIPE_READMODE_BYTE; |
| ret = SetNamedPipeHandleState(client, &state, NULL, NULL); |
| todo_wine |
| ok(ret, "SetNamedPipeHandleState failed: %d\n", GetLastError()); |
| |
| CloseHandle(client); |
| CloseHandle(server); |
| } |
| |
| static void test_readfileex_pending(void) |
| { |
| HANDLE server, client, event; |
| BOOL ret; |
| DWORD err, wait, num_bytes; |
| OVERLAPPED overlapped; |
| char read_buf[1024]; |
| char write_buf[1024]; |
| const char test_string[] = "test"; |
| int i; |
| |
| server = CreateNamedPipe(PIPENAME, FILE_FLAG_OVERLAPPED | PIPE_ACCESS_DUPLEX, |
| /* dwOpenMode */ PIPE_TYPE_BYTE | PIPE_WAIT, |
| /* nMaxInstances */ 1, |
| /* nOutBufSize */ 1024, |
| /* nInBufSize */ 1024, |
| /* nDefaultWait */ NMPWAIT_USE_DEFAULT_WAIT, |
| /* lpSecurityAttrib */ NULL); |
| ok(server != INVALID_HANDLE_VALUE, "cf failed\n"); |
| |
| event = CreateEventA(NULL, TRUE, FALSE, NULL); |
| ok(event != NULL, "CreateEventA failed\n"); |
| |
| memset(&overlapped, 0, sizeof(overlapped)); |
| overlapped.hEvent = event; |
| |
| ret = ConnectNamedPipe(server, &overlapped); |
| err = GetLastError(); |
| ok(ret == FALSE, "ConnectNamedPipe succeeded\n"); |
| ok(err == ERROR_IO_PENDING, "ConnectNamedPipe set error %i\n", err); |
| |
| wait = WaitForSingleObject(event, 0); |
| ok(wait == WAIT_TIMEOUT, "WaitForSingleObject returned %x\n", wait); |
| |
| client = CreateFileA(PIPENAME, GENERIC_READ|GENERIC_WRITE, 0, NULL, |
| OPEN_EXISTING, 0, NULL); |
| ok(client != INVALID_HANDLE_VALUE, "cf failed\n"); |
| |
| wait = WaitForSingleObject(event, 0); |
| ok(wait == WAIT_OBJECT_0, "WaitForSingleObject returned %x\n", wait); |
| |
| /* Start a read that can't complete immediately. */ |
| completion_called = 0; |
| ResetEvent(event); |
| ret = ReadFileEx(server, read_buf, sizeof(read_buf), &overlapped, completion_routine); |
| ok(ret == TRUE, "ReadFileEx failed, err=%i\n", GetLastError()); |
| ok(completion_called == 0, "completion routine called before ReadFileEx returned\n"); |
| |
| ret = WriteFile(client, test_string, strlen(test_string), &num_bytes, NULL); |
| ok(ret == TRUE, "WriteFile failed\n"); |
| ok(num_bytes == strlen(test_string), "only %i bytes written\n", num_bytes); |
| |
| ok(completion_called == 0, "completion routine called during WriteFile\n"); |
| |
| wait = WaitForSingleObjectEx(event, 0, TRUE); |
| ok(wait == WAIT_IO_COMPLETION || wait == WAIT_OBJECT_0, "WaitForSingleObjectEx returned %x\n", wait); |
| |
| ok(completion_called == 1, "completion not called after writing pipe\n"); |
| ok(completion_errorcode == 0, "completion called with error %x\n", completion_errorcode); |
| ok(completion_num_bytes == strlen(test_string), "ReadFileEx returned only %d bytes\n", completion_num_bytes); |
| ok(completion_lpoverlapped == &overlapped, "completion called with wrong overlapped pointer\n"); |
| ok(!memcmp(test_string, read_buf, strlen(test_string)), "ReadFileEx read wrong bytes\n"); |
| |
| /* Make writes until the pipe is full and the write fails */ |
| memset(write_buf, 0xaa, sizeof(write_buf)); |
| for (i=0; i<256; i++) |
| { |
| completion_called = 0; |
| ResetEvent(event); |
| ret = WriteFileEx(server, write_buf, sizeof(write_buf), &overlapped, completion_routine); |
| err = GetLastError(); |
| |
| ok(completion_called == 0, "completion routine called during WriteFileEx\n"); |
| |
| wait = WaitForSingleObjectEx(event, 0, TRUE); |
| |
| if (wait == WAIT_TIMEOUT) |
| /* write couldn't complete immediately, presumably the pipe is full */ |
| break; |
| |
| ok(wait == WAIT_IO_COMPLETION || wait == WAIT_OBJECT_0, "WaitForSingleObject returned %x\n", wait); |
| |
| ok(ret == TRUE, "WriteFileEx failed, err=%i\n", err); |
| ok(completion_errorcode == 0, "completion called with error %x\n", completion_errorcode); |
| ok(completion_lpoverlapped == &overlapped, "completion called with wrong overlapped pointer\n"); |
| } |
| |
| ok(ret == TRUE, "WriteFileEx failed, err=%i\n", err); |
| ok(completion_called == 0, "completion routine called but wait timed out\n"); |
| ok(completion_errorcode == 0, "completion called with error %x\n", completion_errorcode); |
| ok(completion_lpoverlapped == &overlapped, "completion called with wrong overlapped pointer\n"); |
| |
| /* free up some space in the pipe */ |
| ret = ReadFile(client, read_buf, sizeof(read_buf), &num_bytes, NULL); |
| ok(ret == TRUE, "ReadFile failed\n"); |
| |
| ok(completion_called == 0, "completion routine called during ReadFile\n"); |
| |
| wait = WaitForSingleObjectEx(event, 0, TRUE); |
| ok(wait == WAIT_IO_COMPLETION || wait == WAIT_OBJECT_0, "WaitForSingleObject returned %x\n", wait); |
| |
| ok(completion_called == 1, "completion routine not called\n"); |
| ok(completion_errorcode == 0, "completion called with error %x\n", completion_errorcode); |
| ok(completion_lpoverlapped == &overlapped, "completion called with wrong overlapped pointer\n"); |
| |
| CloseHandle(client); |
| CloseHandle(server); |
| CloseHandle(event); |
| } |
| |
| START_TEST(pipe) |
| { |
| HMODULE hmod; |
| |
| hmod = GetModuleHandle("advapi32.dll"); |
| pDuplicateTokenEx = (void *) GetProcAddress(hmod, "DuplicateTokenEx"); |
| hmod = GetModuleHandle("kernel32.dll"); |
| pQueueUserAPC = (void *) GetProcAddress(hmod, "QueueUserAPC"); |
| |
| if (test_DisconnectNamedPipe()) |
| return; |
| test_CreateNamedPipe_instances_must_match(); |
| test_NamedPipe_2(); |
| test_CreateNamedPipe(PIPE_TYPE_BYTE); |
| test_CreateNamedPipe(PIPE_TYPE_MESSAGE | PIPE_READMODE_MESSAGE); |
| test_CreatePipe(); |
| test_impersonation(); |
| test_overlapped(); |
| test_NamedPipeHandleState(); |
| test_readfileex_pending(); |
| } |
