| /* |
| * Emulation of processor ioports. |
| * |
| * Copyright 1995 Morten Welinder |
| * Copyright 1998 Andreas Mohr, Ove Kaaven |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA |
| */ |
| |
| /* Known problems: |
| - only a few ports are emulated. |
| - real-time clock in "cmos" is bogus. A nifty alarm() setup could |
| fix that, I guess. |
| */ |
| |
| #include "config.h" |
| |
| #include <stdarg.h> |
| #include <stdlib.h> |
| |
| #include "windef.h" |
| #include "winbase.h" |
| #include "winnls.h" |
| #include "winreg.h" |
| #include "winternl.h" |
| #include "dosexe.h" |
| #include "vga.h" |
| #include "wine/unicode.h" |
| #include "wine/debug.h" |
| |
| WINE_DEFAULT_DEBUG_CHANNEL(int); |
| |
| #if defined(linux) && defined(__i386__) |
| # define DIRECT_IO_ACCESS |
| #else |
| # undef DIRECT_IO_ACCESS |
| #endif /* linux && __i386__ */ |
| |
| static struct { |
| WORD countmax; |
| BOOL16 byte_toggle; /* if TRUE, then hi byte has already been written */ |
| WORD latch; |
| BOOL16 latched; |
| BYTE ctrlbyte_ch; |
| WORD oldval; |
| } tmr_8253[3] = { |
| {0xFFFF, FALSE, 0, FALSE, 0x36, 0}, |
| {0x0012, FALSE, 0, FALSE, 0x74, 0}, |
| {0x0001, FALSE, 0, FALSE, 0xB6, 0}, |
| }; |
| |
| static int dummy_ctr = 0; |
| |
| static BYTE parport_8255[4] = {0x4f, 0x20, 0xff, 0xff}; |
| |
| static BYTE cmosaddress; |
| |
| /* if you change anything here, use IO_FixCMOSCheckSum below to compute |
| * the checksum and put the right values in. |
| */ |
| static BYTE cmosimage[64] = |
| { |
| 0x27, 0x34, 0x31, 0x47, 0x16, 0x15, 0x00, 0x01, |
| 0x04, 0x94, 0x26, 0x02, 0x50, 0x80, 0x00, 0x00, |
| 0x40, 0xb1, 0x00, 0x9c, 0x01, 0x80, 0x02, 0x00, |
| 0x1c, 0x00, 0x00, 0xad, 0x02, 0x10, 0x00, 0x00, |
| 0x08, 0x00, 0x00, 0x26, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x03, 0x19, /* last 2 bytes are checksum */ |
| 0x00, 0x1c, 0x19, 0x81, 0x00, 0x0e, 0x00, 0x80, |
| 0x1b, 0x7b, 0x21, 0x00, 0x00, 0x00, 0x05, 0x5f |
| }; |
| |
| #if 0 |
| static void IO_FixCMOSCheckSum(void) |
| { |
| WORD sum = 0; |
| int i; |
| |
| for (i=0x10; i < 0x2d; i++) |
| sum += cmosimage[i]; |
| cmosimage[0x2e] = sum >> 8; /* yes, this IS hi byte !! */ |
| cmosimage[0x2f] = sum & 0xff; |
| MESSAGE("calculated hi %02x, lo %02x\n", cmosimage[0x2e], cmosimage[0x2f]); |
| } |
| #endif |
| |
| #ifdef DIRECT_IO_ACCESS |
| |
| extern int iopl(int level); |
| static char do_direct_port_access = -1; |
| static char port_permissions[0x10000]; |
| |
| #define IO_READ 1 |
| #define IO_WRITE 2 |
| |
| #endif /* DIRECT_IO_ACCESS */ |
| |
| #ifdef HAVE_PPDEV |
| static int do_pp_port_access = -1; /* -1: uninitialized, 1: not available |
| 0: available);*/ |
| #endif |
| |
| static void set_timer_maxval(unsigned timer, unsigned maxval) |
| { |
| switch (timer) { |
| case 0: /* System timer counter divisor */ |
| DOSVM_SetTimer(maxval); |
| break; |
| case 1: /* RAM refresh */ |
| FIXME("RAM refresh counter handling not implemented !\n"); |
| break; |
| case 2: /* cassette & speaker */ |
| /* speaker on ? */ |
| if ((parport_8255[1] & 3) == 3) |
| { |
| TRACE("Beep (freq: %d) !\n", 1193180 / maxval ); |
| Beep(1193180 / maxval, 20); |
| } |
| break; |
| } |
| } |
| |
| |
| /********************************************************************** |
| * IO_port_init |
| */ |
| |
| /* set_IO_permissions(int val1, int val) |
| * Helper function for IO_port_init |
| */ |
| #ifdef DIRECT_IO_ACCESS |
| static void set_IO_permissions(int val1, int val, char rw) |
| { |
| int j; |
| if (val1 != -1) { |
| if (val == -1) val = 0x3ff; |
| for (j = val1; j <= val; j++) |
| port_permissions[j] |= rw; |
| |
| do_direct_port_access = 1; |
| |
| val1 = -1; |
| } else if (val != -1) { |
| do_direct_port_access = 1; |
| |
| port_permissions[val] |= rw; |
| } |
| |
| } |
| |
| /* do_IO_port_init_read_or_write(char* temp, char rw) |
| * Helper function for IO_port_init |
| */ |
| |
| static void do_IO_port_init_read_or_write(const WCHAR *str, char rw) |
| { |
| int val, val1; |
| unsigned int i; |
| WCHAR *end; |
| static const WCHAR allW[] = {'a','l','l',0}; |
| |
| if (!strcmpiW(str, allW)) |
| { |
| for (i=0; i < sizeof(port_permissions); i++) |
| port_permissions[i] |= rw; |
| } |
| else |
| { |
| val = -1; |
| val1 = -1; |
| while (*str) |
| { |
| switch(*str) |
| { |
| case ',': |
| case ' ': |
| case '\t': |
| set_IO_permissions(val1, val, rw); |
| val1 = -1; |
| val = -1; |
| str++; |
| break; |
| case '-': |
| val1 = val; |
| if (val1 == -1) val1 = 0; |
| str++; |
| break; |
| default: |
| if (isdigitW(*str)) |
| { |
| val = strtoulW( str, &end, 0 ); |
| if (end == str) |
| { |
| val = -1; |
| str++; |
| } |
| else str = end; |
| } |
| break; |
| } |
| } |
| set_IO_permissions(val1, val, rw); |
| } |
| } |
| |
| static inline BYTE inb( WORD port ) |
| { |
| BYTE b; |
| __asm__ __volatile__( "inb %w1,%0" : "=a" (b) : "d" (port) ); |
| return b; |
| } |
| |
| static inline WORD inw( WORD port ) |
| { |
| WORD w; |
| __asm__ __volatile__( "inw %w1,%0" : "=a" (w) : "d" (port) ); |
| return w; |
| } |
| |
| static inline DWORD inl( WORD port ) |
| { |
| DWORD dw; |
| __asm__ __volatile__( "inl %w1,%0" : "=a" (dw) : "d" (port) ); |
| return dw; |
| } |
| |
| static inline void outb( BYTE value, WORD port ) |
| { |
| __asm__ __volatile__( "outb %b0,%w1" : : "a" (value), "d" (port) ); |
| } |
| |
| static inline void outw( WORD value, WORD port ) |
| { |
| __asm__ __volatile__( "outw %w0,%w1" : : "a" (value), "d" (port) ); |
| } |
| |
| static inline void outl( DWORD value, WORD port ) |
| { |
| __asm__ __volatile__( "outl %0,%w1" : : "a" (value), "d" (port) ); |
| } |
| |
| static void IO_port_init(void) |
| { |
| char tmp[1024]; |
| HANDLE root, hkey; |
| DWORD dummy; |
| OBJECT_ATTRIBUTES attr; |
| UNICODE_STRING nameW; |
| |
| static const WCHAR portsW[] = {'S','o','f','t','w','a','r','e','\\', |
| 'W','i','n','e','\\','V','D','M','\\','P','o','r','t','s',0}; |
| static const WCHAR readW[] = {'r','e','a','d',0}; |
| static const WCHAR writeW[] = {'w','r','i','t','e',0}; |
| |
| do_direct_port_access = 0; |
| /* Can we do that? */ |
| if (!iopl(3)) |
| { |
| iopl(0); |
| |
| RtlOpenCurrentUser( KEY_ALL_ACCESS, &root ); |
| attr.Length = sizeof(attr); |
| attr.RootDirectory = root; |
| attr.ObjectName = &nameW; |
| attr.Attributes = 0; |
| attr.SecurityDescriptor = NULL; |
| attr.SecurityQualityOfService = NULL; |
| RtlInitUnicodeString( &nameW, portsW ); |
| |
| /* @@ Wine registry key: HKCU\Software\Wine\VDM\Ports */ |
| if (!NtOpenKey( &hkey, KEY_ALL_ACCESS, &attr )) |
| { |
| RtlInitUnicodeString( &nameW, readW ); |
| if (!NtQueryValueKey( hkey, &nameW, KeyValuePartialInformation, tmp, sizeof(tmp), &dummy )) |
| { |
| WCHAR *str = (WCHAR *)((KEY_VALUE_PARTIAL_INFORMATION *)tmp)->Data; |
| do_IO_port_init_read_or_write(str, IO_READ); |
| } |
| RtlInitUnicodeString( &nameW, writeW ); |
| if (!NtQueryValueKey( hkey, &nameW, KeyValuePartialInformation, tmp, sizeof(tmp), &dummy )) |
| { |
| WCHAR *str = (WCHAR *)((KEY_VALUE_PARTIAL_INFORMATION *)tmp)->Data; |
| do_IO_port_init_read_or_write(str, IO_WRITE); |
| } |
| NtClose( hkey ); |
| } |
| NtClose( root ); |
| } |
| } |
| |
| #endif /* DIRECT_IO_ACCESS */ |
| |
| |
| /********************************************************************** |
| * inport (WINEDOS.@) |
| * |
| * Note: The size argument has to be handled correctly _externally_ |
| * (as we always return a DWORD) |
| */ |
| DWORD WINAPI DOSVM_inport( int port, int size ) |
| { |
| DWORD res = ~0U; |
| |
| TRACE("%d-byte value from port 0x%04x\n", size, port ); |
| |
| #ifdef HAVE_PPDEV |
| if (do_pp_port_access == -1) do_pp_port_access =IO_pp_init(); |
| if ((do_pp_port_access == 0 ) && (size == 1)) |
| { |
| if (!IO_pp_inp(port,&res)) return res; |
| } |
| #endif |
| |
| #ifdef DIRECT_IO_ACCESS |
| if (do_direct_port_access == -1) IO_port_init(); |
| if ((do_direct_port_access) |
| /* Make sure we have access to the port */ |
| && (port_permissions[port] & IO_READ)) |
| { |
| iopl(3); |
| switch(size) |
| { |
| case 1: res = inb( port ); break; |
| case 2: res = inw( port ); break; |
| case 4: res = inl( port ); break; |
| } |
| iopl(0); |
| return res; |
| } |
| #endif |
| |
| switch (port) |
| { |
| case 0x40: |
| case 0x41: |
| case 0x42: |
| { |
| BYTE chan = port & 3; |
| WORD tempval = 0; |
| if (tmr_8253[chan].latched) |
| tempval = tmr_8253[chan].latch; |
| else |
| { |
| dummy_ctr -= 1 + (int)(10.0 * rand() / (RAND_MAX + 1.0)); |
| if (chan == 0) /* System timer counter divisor */ |
| { |
| /* FIXME: DOSVM_GetTimer() returns quite rigid values */ |
| tempval = dummy_ctr + (WORD)DOSVM_GetTimer(); |
| } |
| else |
| { |
| /* FIXME: intelligent hardware timer emulation needed */ |
| tempval = dummy_ctr; |
| } |
| } |
| |
| switch ((tmr_8253[chan].ctrlbyte_ch & 0x30) >> 4) |
| { |
| case 0: |
| res = 0; /* shouldn't happen? */ |
| break; |
| case 1: /* read lo byte */ |
| res = (BYTE)tempval; |
| tmr_8253[chan].latched = FALSE; |
| break; |
| case 3: /* read lo byte, then hi byte */ |
| tmr_8253[chan].byte_toggle ^= 1; /* toggle */ |
| if (tmr_8253[chan].byte_toggle) |
| { |
| res = (BYTE)tempval; |
| break; |
| } |
| /* else [fall through if read hi byte !] */ |
| case 2: /* read hi byte */ |
| res = (BYTE)(tempval >> 8); |
| tmr_8253[chan].latched = FALSE; |
| break; |
| } |
| } |
| break; |
| case 0x60: |
| res = DOSVM_Int09ReadScan(NULL); |
| break; |
| case 0x61: |
| res = (DWORD)parport_8255[1]; |
| break; |
| case 0x62: |
| res = (DWORD)parport_8255[2]; |
| break; |
| case 0x70: |
| res = (DWORD)cmosaddress; |
| break; |
| case 0x71: |
| res = (DWORD)cmosimage[cmosaddress & 0x3f]; |
| break; |
| case 0x200: |
| case 0x201: |
| res = ~0U; /* no joystick */ |
| break; |
| case 0x22a: |
| case 0x22c: |
| case 0x22e: |
| res = (DWORD)SB_ioport_in( port ); |
| break; |
| case 0x3ba: |
| case 0x3c0: |
| case 0x3c1: |
| case 0x3c2: |
| case 0x3c3: |
| case 0x3c4: |
| case 0x3c5: |
| case 0x3c6: |
| case 0x3c7: |
| case 0x3c8: |
| case 0x3c9: |
| case 0x3ca: |
| case 0x3cb: |
| case 0x3cc: |
| case 0x3cd: |
| case 0x3ce: |
| case 0x3cf: |
| case 0x3d0: |
| case 0x3d1: |
| case 0x3d2: |
| case 0x3d3: |
| case 0x3d4: |
| case 0x3d5: |
| case 0x3d6: |
| case 0x3d7: |
| case 0x3d8: |
| case 0x3d9: |
| case 0x3da: |
| case 0x3db: |
| case 0x3dc: |
| case 0x3dd: |
| case 0x3de: |
| case 0x3df: |
| if(size > 1) |
| FIXME("Trying to read more than one byte from VGA!\n"); |
| res = (DWORD)VGA_ioport_in( port ); |
| break; |
| case 0x00: |
| case 0x01: |
| case 0x02: |
| case 0x03: |
| case 0x04: |
| case 0x05: |
| case 0x06: |
| case 0x07: |
| case 0xC0: |
| case 0xC2: |
| case 0xC4: |
| case 0xC6: |
| case 0xC8: |
| case 0xCA: |
| case 0xCC: |
| case 0xCE: |
| case 0x87: |
| case 0x83: |
| case 0x81: |
| case 0x82: |
| case 0x8B: |
| case 0x89: |
| case 0x8A: |
| case 0x487: |
| case 0x483: |
| case 0x481: |
| case 0x482: |
| case 0x48B: |
| case 0x489: |
| case 0x48A: |
| case 0x08: |
| case 0xD0: |
| case 0x0D: |
| case 0xDA: |
| res = (DWORD)DMA_ioport_in( port ); |
| break; |
| default: |
| WARN("Direct I/O read attempted from port %x\n", port); |
| break; |
| } |
| return res; |
| } |
| |
| |
| /********************************************************************** |
| * outport (WINEDOS.@) |
| */ |
| void WINAPI DOSVM_outport( int port, int size, DWORD value ) |
| { |
| TRACE("IO: 0x%x (%d-byte value) to port 0x%04x\n", value, size, port ); |
| |
| #ifdef HAVE_PPDEV |
| if (do_pp_port_access == -1) do_pp_port_access = IO_pp_init(); |
| if ((do_pp_port_access == 0) && (size == 1)) |
| { |
| if (!IO_pp_outp(port,&value)) return; |
| } |
| #endif |
| |
| #ifdef DIRECT_IO_ACCESS |
| |
| if (do_direct_port_access == -1) IO_port_init(); |
| if ((do_direct_port_access) |
| /* Make sure we have access to the port */ |
| && (port_permissions[port] & IO_WRITE)) |
| { |
| iopl(3); |
| switch(size) |
| { |
| case 1: outb( LOBYTE(value), port ); break; |
| case 2: outw( LOWORD(value), port ); break; |
| case 4: outl( value, port ); break; |
| } |
| iopl(0); |
| return; |
| } |
| #endif |
| |
| switch (port) |
| { |
| case 0x20: |
| DOSVM_PIC_ioport_out( port, (BYTE)value ); |
| break; |
| case 0x40: |
| case 0x41: |
| case 0x42: |
| { |
| BYTE chan = port & 3; |
| |
| /* we need to get the oldval before any lo/hi byte change has been made */ |
| if (((tmr_8253[chan].ctrlbyte_ch & 0x30) != 0x30) || |
| !tmr_8253[chan].byte_toggle) |
| tmr_8253[chan].oldval = tmr_8253[chan].countmax; |
| switch ((tmr_8253[chan].ctrlbyte_ch & 0x30) >> 4) |
| { |
| case 0: |
| break; /* shouldn't happen? */ |
| case 1: /* write lo byte */ |
| tmr_8253[chan].countmax = |
| (tmr_8253[chan].countmax & 0xff00) | (BYTE)value; |
| break; |
| case 3: /* write lo byte, then hi byte */ |
| tmr_8253[chan].byte_toggle ^= TRUE; /* toggle */ |
| if (tmr_8253[chan].byte_toggle) |
| { |
| tmr_8253[chan].countmax = |
| (tmr_8253[chan].countmax & 0xff00) | (BYTE)value; |
| break; |
| } |
| /* else [fall through if write hi byte !] */ |
| case 2: /* write hi byte */ |
| tmr_8253[chan].countmax = |
| (tmr_8253[chan].countmax & 0x00ff) | ((BYTE)value << 8); |
| break; |
| } |
| /* if programming is finished and value has changed |
| then update to new value */ |
| if ((((tmr_8253[chan].ctrlbyte_ch & 0x30) != 0x30) || |
| !tmr_8253[chan].byte_toggle) && |
| (tmr_8253[chan].countmax != tmr_8253[chan].oldval)) |
| set_timer_maxval(chan, tmr_8253[chan].countmax); |
| } |
| break; |
| case 0x43: |
| { |
| BYTE chan = ((BYTE)value & 0xc0) >> 6; |
| /* ctrl byte for specific timer channel */ |
| if (chan == 3) |
| { |
| FIXME("8254 timer readback not implemented yet\n"); |
| break; |
| } |
| switch (((BYTE)value & 0x30) >> 4) |
| { |
| case 0: /* latch timer */ |
| tmr_8253[chan].latched = TRUE; |
| dummy_ctr -= 1 + (int)(10.0 * rand() / (RAND_MAX + 1.0)); |
| if (chan == 0) /* System timer divisor */ |
| tmr_8253[chan].latch = dummy_ctr + (WORD)DOSVM_GetTimer(); |
| else |
| { |
| /* FIXME: intelligent hardware timer emulation needed */ |
| tmr_8253[chan].latch = dummy_ctr; |
| } |
| break; |
| case 3: /* write lo byte, then hi byte */ |
| tmr_8253[chan].byte_toggle = FALSE; /* init */ |
| /* fall through */ |
| case 1: /* write lo byte only */ |
| case 2: /* write hi byte only */ |
| tmr_8253[chan].ctrlbyte_ch = (BYTE)value; |
| break; |
| } |
| } |
| break; |
| case 0x61: |
| parport_8255[1] = (BYTE)value; |
| if ((((BYTE)parport_8255[1] & 3) == 3) && (tmr_8253[2].countmax != 1)) |
| { |
| TRACE("Beep (freq: %d) !\n", 1193180 / tmr_8253[2].countmax); |
| Beep(1193180 / tmr_8253[2].countmax, 20); |
| } |
| break; |
| case 0x70: |
| cmosaddress = (BYTE)value & 0x7f; |
| break; |
| case 0x71: |
| cmosimage[cmosaddress & 0x3f] = (BYTE)value; |
| break; |
| case 0x226: |
| case 0x22c: |
| SB_ioport_out( port, (BYTE)value ); |
| break; |
| case 0x3c0: |
| case 0x3c1: |
| case 0x3c2: |
| case 0x3c3: |
| case 0x3c4: |
| case 0x3c5: |
| case 0x3c6: |
| case 0x3c7: |
| case 0x3c8: |
| case 0x3c9: |
| case 0x3ca: |
| case 0x3cb: |
| case 0x3cc: |
| case 0x3cd: |
| case 0x3ce: |
| case 0x3cf: |
| case 0x3d0: |
| case 0x3d1: |
| case 0x3d2: |
| case 0x3d3: |
| case 0x3d4: |
| case 0x3d5: |
| case 0x3d6: |
| case 0x3d7: |
| case 0x3d8: |
| case 0x3d9: |
| case 0x3da: |
| case 0x3db: |
| case 0x3dc: |
| case 0x3dd: |
| case 0x3de: |
| case 0x3df: |
| VGA_ioport_out( port, LOBYTE(value) ); |
| if(size > 1) { |
| VGA_ioport_out( port+1, HIBYTE(value) ); |
| if(size > 2) { |
| VGA_ioport_out( port+2, LOBYTE(HIWORD(value)) ); |
| VGA_ioport_out( port+3, HIBYTE(HIWORD(value)) ); |
| } |
| } |
| break; |
| case 0x00: |
| case 0x01: |
| case 0x02: |
| case 0x03: |
| case 0x04: |
| case 0x05: |
| case 0x06: |
| case 0x07: |
| case 0xC0: |
| case 0xC2: |
| case 0xC4: |
| case 0xC6: |
| case 0xC8: |
| case 0xCA: |
| case 0xCC: |
| case 0xCE: |
| case 0x87: |
| case 0x83: |
| case 0x81: |
| case 0x82: |
| case 0x8B: |
| case 0x89: |
| case 0x8A: |
| case 0x487: |
| case 0x483: |
| case 0x481: |
| case 0x482: |
| case 0x48B: |
| case 0x489: |
| case 0x48A: |
| case 0x08: |
| case 0xD0: |
| case 0x0B: |
| case 0xD6: |
| case 0x0A: |
| case 0xD4: |
| case 0x0F: |
| case 0xDE: |
| case 0x09: |
| case 0xD2: |
| case 0x0C: |
| case 0xD8: |
| case 0x0D: |
| case 0xDA: |
| case 0x0E: |
| case 0xDC: |
| DMA_ioport_out( port, (BYTE)value ); |
| break; |
| default: |
| WARN("Direct I/O write attempted to port %x\n", port ); |
| break; |
| } |
| } |
