|  | WINE REGISTRY Version 2 | 
|  | ;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config | 
|  |  | 
|  | ;; If you think it is necessary to show others your complete config for a | 
|  | ;; bug report, filter out empty lines and comments with | 
|  | ;; grep -v "^;" ~/.wine/config | grep '.' | 
|  | ;; | 
|  | ;; MS-DOS drives configuration | 
|  | ;; | 
|  | ;; Each section has the following format: | 
|  | ;; [Drive X] | 
|  | ;; "Path"="xxx"       (Unix path for drive root) | 
|  | ;; "Type"="xxx"       (supported types are 'floppy', 'hd', 'cdrom' and 'network') | 
|  | ;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix') | 
|  | ;;   This is the FS Wine is supposed to emulate on a certain | 
|  | ;;   directory structure. | 
|  | ;;   Recommended: | 
|  | ;;   - "win95" for ext2fs, VFAT and FAT32 | 
|  | ;;   - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended) | 
|  | ;;   DON'T use "unix" unless you intend to port programs using Winelib ! | 
|  | ;; "Device"="/dev/xx" (only if you want to allow raw device access) | 
|  | ;; | 
|  | [Drive A] | 
|  | "Path" = "/mnt/fd0" | 
|  | "Type" = "floppy" | 
|  | "Filesystem" = "win95" | 
|  | "Device" = "/dev/fd0" | 
|  |  | 
|  | [Drive C] | 
|  | "Path" = "/c" | 
|  | "Type" = "hd" | 
|  | "Filesystem" = "win95" | 
|  |  | 
|  | [Drive D] | 
|  | "Path" = "/cdrom" | 
|  | "Type" = "cdrom" | 
|  | "Filesystem" = "win95" | 
|  | ; make sure that device is correct and has proper permissions ! | 
|  | "Device" = "/dev/cdrom" | 
|  |  | 
|  | [Drive E] | 
|  | "Path" = "/tmp" | 
|  | "Type" = "hd" | 
|  | "Filesystem" = "win95" | 
|  |  | 
|  | [Drive F] | 
|  | "Path" = "%HOME%" | 
|  | "Type" = "network" | 
|  | "Filesystem" = "win95" | 
|  |  | 
|  | [Drive Z] | 
|  | "Path" = "/" | 
|  | "Type" = "hd" | 
|  | "Filesystem" = "win95" | 
|  |  | 
|  | [wine] | 
|  | "Windows" = "c:\\windows" | 
|  | "System" = "c:\\windows\\system" | 
|  | "Temp" = "e:\\" | 
|  | "Path" = "c:\\windows;c:\\windows\\system;e:\\;e:\\test;f:\\" | 
|  | "Profile" = "c:\\windows\\Profiles\\Administrator" | 
|  | "GraphicsDriver" = "x11drv" | 
|  | ;"ShowDirSymlinks" = "1" | 
|  | ;"ShowDotFiles" = "1" | 
|  | "ShellLinker" = "wineshelllink" | 
|  |  | 
|  | # [wineconf] | 
|  |  | 
|  | [Version] | 
|  | ; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win2k3,win20,win30,win31) | 
|  | ;"Windows" = "win98" | 
|  | ; DOS version to imitate | 
|  | ;"DOS" = "6.22" | 
|  |  | 
|  | ; Be careful here, wrong DllOverrides settings have the potential | 
|  | ; to pretty much kill your setup. | 
|  | [DllOverrides] | 
|  | ; some dlls you may want to change | 
|  | "oleaut32"     = "builtin, native" | 
|  | "ole32"        = "builtin, native" | 
|  | "comdlg32"     = "builtin, native" | 
|  | "shell32"      = "builtin, native" | 
|  | "shfolder"     = "builtin, native" | 
|  | "shlwapi"      = "builtin, native" | 
|  | "shdocvw"      = "builtin, native" | 
|  | "advapi32"     = "builtin, native" | 
|  | "msvcrt"       = "native, builtin" | 
|  | "mciavi.drv"   = "native, builtin" | 
|  | "mcianim.drv"  = "native, builtin" | 
|  | "msi"          = "native, builtin" | 
|  | ; you can specify applications too | 
|  | ; this one will apply for all notepad.exe | 
|  | ;"*notepad.exe" = "native, builtin" | 
|  | ; this one will apply only for a particular file | 
|  | ;"C:\\windows\\regedit.exe" = "native, builtin" | 
|  | ; default for all other dlls | 
|  | "*" = "builtin, native" | 
|  |  | 
|  | [x11drv] | 
|  | ; Number of colors to allocate from the system palette | 
|  | "AllocSystemColors" = "100" | 
|  | ; Use a private color map | 
|  | "PrivateColorMap" = "N" | 
|  | ; Favor correctness over speed in some graphics operations | 
|  | "PerfectGraphics" = "N" | 
|  | ; Color depth to use on multi-depth screens | 
|  | ;;"ScreenDepth" = "16" | 
|  | ; Allow the window manager to manage created windows | 
|  | "Managed" = "Y" | 
|  | ; Use a desktop window of 640x480 for Wine | 
|  | ;"Desktop" = "640x480" | 
|  | ; Use XFree86 DGA extension if present | 
|  | ; (make sure /dev/mem is accessible by you !) | 
|  | "UseDGA" = "Y" | 
|  | ; Use XVidMode extension if present | 
|  | "UseXVidMode" = "Y" | 
|  | ; Use XRandR extension if present | 
|  | "UseXRandR" = "Y" | 
|  | ; Use the take focus protocol | 
|  | "UseTakeFocus" = "Y" | 
|  | ; Enable DirectX mouse grab | 
|  | "DXGrab" = "N" | 
|  | ; Create the desktop window with a double-buffered visual | 
|  | ; (useful to play OpenGL games) | 
|  | "DesktopDoubleBuffered" = "N" | 
|  | ; Run in synchronous mode (useful for debugging X11 problems) | 
|  | ;;"Synchronous" = "Y" | 
|  | ; | 
|  | ; Use the Render extension to render client side fonts (default "Y") | 
|  | ;;"ClientSideWithRender" = "Y" | 
|  | ; Fallback on X core requests to render client side fonts (default "Y") | 
|  | ;;"ClientSideWithCore" = "Y" | 
|  | ; Set both of the previous two to "N" in order to force X11 server side fonts | 
|  | ; | 
|  | ; Anti-alias fonts if using the Render extension (default "Y") | 
|  | ;;"ClientSideAntiAliasWithRender" = "Y" | 
|  | ; Anti-alias fonts if using core requests fallback (default "Y") | 
|  | ;;"ClientSideAntiAliasWithCore" = "Y" | 
|  | ; | 
|  |  | 
|  | [fonts] | 
|  | ;Read the Fonts topic in the Wine User Guide before adding aliases | 
|  | ;See a couple of examples for russian users below | 
|  | "Resolution" = "96" | 
|  | "Default" = "-adobe-helvetica-" | 
|  | "DefaultFixed" = "fixed" | 
|  | "DefaultSerif" = "-adobe-times-" | 
|  | "DefaultSansSerif" = "-adobe-helvetica-" | 
|  |  | 
|  | ;; default TrueType fonts with russian koi8-r encoding | 
|  | ;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r" | 
|  | ;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r" | 
|  | ;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r" | 
|  | ;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r" | 
|  | ;; default cyrillic bitmap X fonts | 
|  | ;"Default" = "-cronyx-helvetica-" | 
|  | ;"DefaultFixed" = "fixed" | 
|  | ;"DefaultSerif" = "-cronyx-times-" | 
|  | ;"DefaultSansSerif" = "-cronyx-helvetica-" | 
|  |  | 
|  | ; the TrueType font dirs you want to make accessible to wine | 
|  | [FontDirs] | 
|  | ;"dir1" = "/usr/X11R6/lib/X11/fonts/TrueType" | 
|  | ;"dir2" = "/usr/share/fonts/truetype" | 
|  | ;"dir3" = "/usr/X11R6/lib/X11/fonts/TT" | 
|  | ;"dir4" = "/usr/share/fonts/TT" | 
|  |  | 
|  | [serialports] | 
|  | "Com1" = "/dev/ttyS0" | 
|  | "Com2" = "/dev/ttyS1" | 
|  | "Com3" = "/dev/ttyS2" | 
|  | "Com4" = "/dev/modem" | 
|  |  | 
|  | [parallelports] | 
|  | "Lpt1" = "/dev/lp0" | 
|  |  | 
|  | [ppdev] | 
|  | ;; key:  io-base of the emulated port | 
|  | ;; value : parport-device{,timeout} | 
|  | ;; timeout for auto closing an open device ( not yet implemented) | 
|  | ;"378" = "/dev/parport0" | 
|  | ;"278" = "/dev/parport1" | 
|  | ;"3bc" = "/dev/parport2" | 
|  |  | 
|  | [spooler] | 
|  | "FILE:" = "tmp.ps" | 
|  | "LPT1:" = "|lpr" | 
|  | "LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -" | 
|  | "LPT3:" = "/dev/lp3" | 
|  |  | 
|  | [ports] | 
|  | ;"read"  = "0x779,0x379,0x280-0x2a0" | 
|  | ;"write" = "0x779,0x379,0x280-0x2a0" | 
|  |  | 
|  | [Debug] | 
|  | ;"RelayExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection" | 
|  | ;"RelayInclude" = "user32.CreateWindowA" | 
|  | ;"RelayFromExclude" = "user32;x11drv" | 
|  | ;"RelayFromInclude" = "sol.exe" | 
|  | ;"SnoopExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection" | 
|  | ;"SpyExclude" = "WM_SIZE;WM_TIMER;" | 
|  |  | 
|  | [registry] | 
|  | ;These are all booleans.  Y/y/T/t/1 are true, N/n/F/f/0 are false. | 
|  | ;Defaults are read all, write to Home | 
|  | ; Where to find the global registries | 
|  | ;"GlobalRegistryDir" = "/etc"; | 
|  | ; Global registries (stored in /etc) | 
|  | "LoadGlobalRegistryFiles" = "Y" | 
|  | ; Home registries (stored in ~user/.wine/) | 
|  | "LoadHomeRegistryFiles" = "Y" | 
|  | ; Load Windows registries from the Windows directory | 
|  | "LoadWindowsRegistryFiles" = "Y" | 
|  | ; TRY to write all changes to home registries | 
|  | "WritetoHomeRegistryFiles" = "Y" | 
|  | ; Registry periodic save timeout in seconds | 
|  | ; "PeriodicSave" = "600" | 
|  | ; Save only modified keys | 
|  | "SaveOnlyUpdatedKeys" = "Y" | 
|  |  | 
|  | [Tweak.Layout] | 
|  | ;; supported styles are 'Win31'(default), 'Win95', 'Win98' | 
|  | ;; this has *nothing* to do with the windows version Wine returns: | 
|  | ;; set the "Windows" value in the [Version] section if you want that. | 
|  | "WineLook" = "Win95" | 
|  |  | 
|  | [Clipboard] | 
|  | "ClearAllSelections" = "0" | 
|  | "PersistentSelection" = "1" | 
|  | "UsePrimary" = "0" | 
|  |  | 
|  | ; List of all directories directly contain .AFM files | 
|  | [afmdirs] | 
|  | "1" = "/usr/share/ghostscript/fonts" | 
|  | "2" = "/usr/share/a2ps/afm" | 
|  | "3" = "/usr/share/enscript" | 
|  | "4" = "/usr/X11R6/lib/X11/fonts/Type1" | 
|  |  | 
|  | [WinMM] | 
|  | ; Uncomment the "Drivers" line matching your sound setting. | 
|  |  | 
|  | "Drivers" = "wineoss.drv"      ; default for most common configurations | 
|  | ;"Drivers" = "winearts.drv"    ; for KDE | 
|  | ;"Drivers" = "winealsa.drv"    ; for ALSA users | 
|  | ;"Drivers" = "winejack.drv"    ; for Jack sound server | 
|  | ;"Drivers" = "winenas.drv"     ; for NAS sound system | 
|  | ;"Drivers" = "wineaudioio.drv" ; for Solaris machines | 
|  | ;"Drivers" = ""                ; to disable sound | 
|  | "WaveMapper" = "msacm.drv" | 
|  | "MidiMapper" = "midimap.drv" | 
|  |  | 
|  | [dsound] | 
|  | ;; HEL only: Number of waveOut fragments ahead to mix in new buffers. | 
|  | ;"HELmargin" = "5" | 
|  | ;; HEL only: Number of waveOut fragments ahead to queue to driver. | 
|  | ;"HELqueue" = "5" | 
|  | ;; Max number of fragments to prebuffer | 
|  | ;"SndQueueMax" = "28" | 
|  | ;; Min number of fragments to prebuffer | 
|  | ;"SndQueueMin" = "12" | 
|  | ;; Forces emulation mode (using wave api) | 
|  | ;"HardwareAcceleration" = "Emulation" | 
|  | ;; Sets default playback device (0 - number of devices - 1) | 
|  | ;"DefaultPlayback" = "0"	; use first device (/dev/dsp) | 
|  | ;"DefaultPlayback" = "1" 	; use second device (/dev/dsp1) | 
|  | ;"DefaultPlayback" = "2" 	; use third device (/dev/dsp2) | 
|  | ;; Sets default capture device (0 - number of devices - 1) | 
|  | ;"DefaultCapture" = "0"		; use first device (/dev/dsp) | 
|  | ;"DefaultCapture" = "1"		; use second device (/dev/dsp1) | 
|  | ;"DefaultCapture" = "2"		; use third device (/dev/dsp2) | 
|  |  | 
|  | [Network] | 
|  | ;; Use the DNS (Unix) host name always as NetBIOS "ComputerName" (boolean, default "Y"). | 
|  | ;; Set to N if you need a persistent NetBIOS ComputerName that possibly differs | 
|  | ;; from the Unix host name. You'll need to set ComputerName in | 
|  | ;; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ComputerName\ComputerName, too. | 
|  | ;"UseDnsComputerName" = "N" | 
|  |  | 
|  | ;; sample AppDefaults entries | 
|  |  | 
|  | ; 3 InstallShield versions who like to put their full screen window in front, | 
|  | ; without any chance to switch to another X11 application. | 
|  | ; So just catch them in a desktop window. | 
|  |  | 
|  | [AppDefaults\\_INS0432._MP\\x11drv] | 
|  | "Desktop" = "640x480" | 
|  |  | 
|  | [AppDefaults\\_INS0466._MP\\x11drv] | 
|  | "Desktop" = "640x480" | 
|  |  | 
|  | [AppDefaults\\_INS0576._MP\\x11drv] | 
|  | "Desktop" = "640x480" | 
|  |  | 
|  | [AppDefaults\\_INS5176._MP\\x11drv] | 
|  | "Desktop" = "640x480" | 
|  |  | 
|  | [AppDefaults\\_INS5576._MP\\x11drv] | 
|  | "Desktop" = "640x480" | 
|  |  | 
|  | ;[AppDefaults\\iexplore.exe\\DllOverrides] | 
|  | ;"shlwapi" = "native" | 
|  | ;"rpcrt4" = "native" | 
|  | ;"ole32" = "native" | 
|  | ;"shdocvw" = "native" | 
|  | ;"wininet" = "native" | 
|  | ;"shfolder" = "native" | 
|  | ;"shell32" = "native" | 
|  | ;"shell" = "native" | 
|  | ;"comctl32" = "native" | 
|  | ; | 
|  | ;[AppDefaults\\setup.exe\\x11drv] | 
|  | ;"Desktop" = "800x600" | 
|  | ; | 
|  | ;[AppDefaults\\sol.exe\\Version] | 
|  | ;"Windows" = "nt40" | 
|  | ; | 
|  | ;; Some games (Quake 2, UT) refuse to accept emulated dsound devices. | 
|  | ;; You can add an AppDefault entry like this for such cases. | 
|  | ;[AppDefaults\\pickygame.exe\\dsound] | 
|  | ;"EmulDriver" = "N" | 
|  |  | 
|  | # [/wineconf] |