| %{ | |
| /* | |
| * Parser for command lines in the Wine debugger | |
| * | |
| * Copyright 1993 Eric Youngdale | |
| * Copyright 1995 Morten Welinder | |
| * Copyright 2000 Eric Pouech | |
| */ | |
| #include "config.h" | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <signal.h> | |
| #include <unistd.h> | |
| #include "wine/exception.h" | |
| #include "debugger.h" | |
| #include "expr.h" | |
| #include "task.h" | |
| extern FILE * yyin; | |
| int curr_frame = 0; | |
| static void issue_prompt(void); | |
| static void mode_command(int); | |
| void flush_symbols(void); | |
| int yylex(void); | |
| int yyerror(char *); | |
| %} | |
| %union | |
| { | |
| DBG_VALUE value; | |
| enum debug_regs reg; | |
| char * string; | |
| int integer; | |
| struct list_id listing; | |
| struct expr * expression; | |
| struct datatype * type; | |
| } | |
| %token tCONT tPASS tSTEP tLIST tNEXT tQUIT tHELP tBACKTRACE tINFO tWALK tUP tDOWN | |
| %token tENABLE tDISABLE tBREAK tWATCH tDELETE tSET tMODE tPRINT tEXAM tABORT | |
| %token tCLASS tMAPS tMODULE tSTACK tSEGMENTS tREGS tWND tQUEUE tLOCAL | |
| %token tPROCESS tMODREF | |
| %token tEOL tSTRING tDEBUGSTR | |
| %token tFRAME tSHARE tCOND tDISPLAY tUNDISPLAY tDISASSEMBLE | |
| %token tSTEPI tNEXTI tFINISH tSHOW tDIR tWHATIS | |
| %token <string> tPATH | |
| %token <string> tIDENTIFIER tSTRING tDEBUGSTR | |
| %token <integer> tNUM tFORMAT | |
| %token <reg> tREG | |
| %token tSYMBOLFILE | |
| %token tCHAR tSHORT tINT tLONG tFLOAT tDOUBLE tUNSIGNED tSIGNED | |
| %token tSTRUCT tUNION tENUM | |
| /* %left ',' */ | |
| /* %left '=' OP_OR_EQUAL OP_XOR_EQUAL OP_AND_EQUAL OP_SHL_EQUAL \ | |
| OP_SHR_EQUAL OP_PLUS_EQUAL OP_MINUS_EQUAL \ | |
| OP_TIMES_EQUAL OP_DIVIDE_EQUAL OP_MODULO_EQUAL */ | |
| /* %left OP_COND */ /* ... ? ... : ... */ | |
| %left OP_LOR | |
| %left OP_LAND | |
| %left '|' | |
| %left '^' | |
| %left '&' | |
| %left OP_EQ OP_NE | |
| %left '<' '>' OP_LE OP_GE | |
| %left OP_SHL OP_SHR | |
| %left '+' '-' | |
| %left '*' '/' '%' | |
| %left OP_SIGN '!' '~' OP_DEREF /* OP_INC OP_DEC OP_ADDR */ | |
| %left '.' '[' OP_DRF | |
| %nonassoc ':' | |
| %type <expression> expr lval lvalue | |
| %type <type> type_cast type_expr | |
| %type <value> expr_addr lval_addr | |
| %type <integer> expr_value | |
| %type <string> pathname | |
| %type <listing> list_arg | |
| %% | |
| input: line { issue_prompt(); } | |
| | input line { issue_prompt(); } | |
| line: command | |
| | tEOL | |
| | error tEOL { yyerrok; } | |
| command: | |
| tQUIT tEOL { DEBUG_Exit(0); } | |
| | tHELP tEOL { DEBUG_Help(); } | |
| | tHELP tINFO tEOL { DEBUG_HelpInfo(); } | |
| | tCONT tEOL { DEBUG_CurrThread->dbg_exec_count = 1; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_CONT; return 0; } | |
| | tPASS tEOL { DEBUG_CurrThread->dbg_exec_count = 1; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_PASS; return 0; } | |
| | tCONT tNUM tEOL { DEBUG_CurrThread->dbg_exec_count = $2; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_CONT; return 0; } | |
| | tSTEP tEOL { DEBUG_CurrThread->dbg_exec_count = 1; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_STEP_INSTR; return 0; } | |
| | tNEXT tEOL { DEBUG_CurrThread->dbg_exec_count = 1; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_STEP_OVER; return 0; } | |
| | tSTEP tNUM tEOL { DEBUG_CurrThread->dbg_exec_count = $2; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_STEP_INSTR; return 0; } | |
| | tNEXT tNUM tEOL { DEBUG_CurrThread->dbg_exec_count = $2; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_STEP_OVER; return 0; } | |
| | tSTEPI tEOL { DEBUG_CurrThread->dbg_exec_count = 1; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_STEPI_INSTR; return 0; } | |
| | tNEXTI tEOL { DEBUG_CurrThread->dbg_exec_count = 1; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_STEPI_OVER; return 0; } | |
| | tSTEPI tNUM tEOL { DEBUG_CurrThread->dbg_exec_count = $2; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_STEPI_INSTR; return 0; } | |
| | tNEXTI tNUM tEOL { DEBUG_CurrThread->dbg_exec_count = $2; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_STEPI_OVER; return 0; } | |
| | tABORT tEOL { kill(getpid(), SIGABRT); } | |
| | tMODE tNUM tEOL { mode_command($2); } | |
| | tENABLE tNUM tEOL { DEBUG_EnableBreakpoint( $2, TRUE ); } | |
| | tDISABLE tNUM tEOL { DEBUG_EnableBreakpoint( $2, FALSE ); } | |
| | tDELETE tBREAK tNUM tEOL { DEBUG_DelBreakpoint( $3 ); } | |
| | tBACKTRACE tEOL { DEBUG_BackTrace(TRUE); } | |
| | tUP tEOL { DEBUG_SetFrame( curr_frame + 1 ); } | |
| | tUP tNUM tEOL { DEBUG_SetFrame( curr_frame + $2 ); } | |
| | tDOWN tEOL { DEBUG_SetFrame( curr_frame - 1 ); } | |
| | tDOWN tNUM tEOL { DEBUG_SetFrame( curr_frame - $2 ); } | |
| | tFRAME tNUM tEOL { DEBUG_SetFrame( $2 ); } | |
| | tFINISH tEOL { DEBUG_CurrThread->dbg_exec_count = 0; | |
| DEBUG_CurrThread->dbg_exec_mode = EXEC_FINISH; return 0; } | |
| | tSHOW tDIR tEOL { DEBUG_ShowDir(); } | |
| | tDIR pathname tEOL { DEBUG_AddPath( $2 ); } | |
| | tDIR tEOL { DEBUG_NukePath(); } | |
| | tDISPLAY tEOL { DEBUG_InfoDisplay(); } | |
| | tDISPLAY expr tEOL { DEBUG_AddDisplay($2, 1, 0); } | |
| | tDISPLAY tFORMAT expr tEOL { DEBUG_AddDisplay($3, $2 >> 8, $2 & 0xff); } | |
| | tDELETE tDISPLAY tNUM tEOL { DEBUG_DelDisplay( $3 ); } | |
| | tDELETE tDISPLAY tEOL { DEBUG_DelDisplay( -1 ); } | |
| | tUNDISPLAY tNUM tEOL { DEBUG_DelDisplay( $2 ); } | |
| | tUNDISPLAY tEOL { DEBUG_DelDisplay( -1 ); } | |
| | tCOND tNUM tEOL { DEBUG_AddBPCondition($2, NULL); } | |
| | tCOND tNUM expr tEOL { DEBUG_AddBPCondition($2, $3); } | |
| | tSYMBOLFILE pathname tEOL{ DEBUG_ReadSymbolTable($2); } | |
| | tWHATIS expr_addr tEOL { DEBUG_PrintType(&$2); DEBUG_FreeExprMem(); } | |
| | list_command | |
| | disassemble_command | |
| | set_command | |
| | x_command | |
| | print_command | |
| | break_command | |
| | watch_command | |
| | info_command | |
| | walk_command | |
| set_command: | |
| tSET tREG '=' expr_value tEOL { DEBUG_SetRegister( $2, $4 ); | |
| DEBUG_FreeExprMem(); } | |
| | tSET lval_addr '=' expr_value tEOL { DEBUG_WriteMemory( &$2.addr, $4 ); | |
| DEBUG_FreeExprMem(); } | |
| pathname: | |
| tIDENTIFIER { $$ = $1; } | |
| | tPATH { $$ = $1; } | |
| disassemble_command: | |
| tDISASSEMBLE tEOL { DEBUG_Disassemble( NULL, NULL, 10 ); } | |
| | tDISASSEMBLE expr_addr tEOL { DEBUG_Disassemble( & $2, NULL, 10 ); } | |
| | tDISASSEMBLE expr_addr ',' expr_addr tEOL { DEBUG_Disassemble( & $2, & $4, 0 ); } | |
| list_command: | |
| tLIST tEOL { DEBUG_List( NULL, NULL, 10 ); } | |
| | tLIST '-' tEOL { DEBUG_List( NULL, NULL, -10 ); } | |
| | tLIST list_arg tEOL { DEBUG_List( & $2, NULL, 10 ); } | |
| | tLIST ',' list_arg tEOL { DEBUG_List( NULL, & $3, -10 ); } | |
| | tLIST list_arg ',' list_arg tEOL { DEBUG_List( & $2, & $4, 0 ); } | |
| list_arg: | |
| tNUM { $$.sourcefile = NULL; $$.line = $1; } | |
| | pathname ':' tNUM { $$.sourcefile = $1; $$.line = $3; } | |
| | tIDENTIFIER { DEBUG_GetFuncInfo( & $$, NULL, $1); } | |
| | pathname ':' tIDENTIFIER { DEBUG_GetFuncInfo( & $$, $1, $3); } | |
| | '*' expr_addr { DEBUG_FindNearestSymbol( & $2.addr, FALSE, NULL, | |
| 0, & $$ ); | |
| DEBUG_FreeExprMem(); } | |
| x_command: | |
| tEXAM expr_addr tEOL { DEBUG_ExamineMemory( &$2, 1, 'x'); | |
| DEBUG_FreeExprMem(); } | |
| | tEXAM tFORMAT expr_addr tEOL { DEBUG_ExamineMemory( &$3, $2>>8, $2&0xff ); | |
| DEBUG_FreeExprMem(); } | |
| print_command: | |
| tPRINT expr_addr tEOL { DEBUG_Print( &$2, 1, 0, 0 ); | |
| DEBUG_FreeExprMem(); } | |
| | tPRINT tFORMAT expr_addr tEOL { DEBUG_Print( &$3, $2 >> 8, $2 & 0xff, 0 ); | |
| DEBUG_FreeExprMem(); } | |
| break_command: | |
| tBREAK '*' expr_addr tEOL { DEBUG_AddBreakpoint( &$3 ); | |
| DEBUG_FreeExprMem(); } | |
| | tBREAK tIDENTIFIER tEOL { DBG_VALUE value; | |
| if( DEBUG_GetSymbolValue($2, -1, &value, TRUE) ) | |
| { | |
| DEBUG_AddBreakpoint( &value ); | |
| } | |
| else | |
| { | |
| fprintf(stderr,"Unable to add breakpoint\n"); | |
| } | |
| } | |
| | tBREAK tIDENTIFIER ':' tNUM tEOL { DBG_VALUE value; | |
| if( DEBUG_GetSymbolValue($2, $4, &value, TRUE) ) | |
| { | |
| DEBUG_AddBreakpoint( &value ); | |
| } | |
| else | |
| { | |
| fprintf(stderr,"Unable to add breakpoint\n"); | |
| } | |
| } | |
| | tBREAK tNUM tEOL { struct name_hash *nh; | |
| DBG_VALUE value; | |
| DEBUG_GetCurrentAddress( &value.addr ); | |
| DEBUG_FindNearestSymbol(&value.addr, TRUE, | |
| &nh, 0, NULL); | |
| if( nh != NULL ) | |
| { | |
| DEBUG_GetLineNumberAddr(nh, $2, &value.addr, TRUE); | |
| value.type = NULL; | |
| value.cookie = DV_TARGET; | |
| DEBUG_AddBreakpoint( &value ); | |
| } | |
| else | |
| { | |
| fprintf(stderr,"Unable to add breakpoint\n"); | |
| } | |
| } | |
| | tBREAK tEOL { DBG_VALUE value; | |
| DEBUG_GetCurrentAddress( &value.addr ); | |
| value.type = NULL; | |
| value.cookie = DV_TARGET; | |
| DEBUG_AddBreakpoint( &value ); | |
| } | |
| watch_command: | |
| tWATCH '*' expr_addr tEOL { DEBUG_AddWatchpoint( &$3, 1 ); | |
| DEBUG_FreeExprMem(); } | |
| | tWATCH tIDENTIFIER tEOL { DBG_VALUE value; | |
| if( DEBUG_GetSymbolValue($2, -1, &value, TRUE) ) | |
| DEBUG_AddWatchpoint( &value, 1 ); | |
| else | |
| fprintf(stderr,"Unable to add breakpoint\n"); | |
| } | |
| info_command: | |
| tINFO tBREAK tEOL { DEBUG_InfoBreakpoints(); } | |
| | tINFO tCLASS tSTRING tEOL { DEBUG_InfoClass( $3 ); DEBUG_FreeExprMem(); } | |
| | tINFO tSHARE tEOL { DEBUG_InfoShare(); } | |
| | tINFO tMODULE expr_value tEOL { DEBUG_DumpModule( $3 ); DEBUG_FreeExprMem(); } | |
| | tINFO tQUEUE expr_value tEOL { DEBUG_DumpQueue( $3 ); DEBUG_FreeExprMem(); } | |
| | tINFO tREGS tEOL { DEBUG_InfoRegisters(); } | |
| | tINFO tSEGMENTS expr_value tEOL { DEBUG_InfoSegments( $3, 1 ); DEBUG_FreeExprMem(); } | |
| | tINFO tSEGMENTS tEOL { DEBUG_InfoSegments( 0, -1 ); } | |
| | tINFO tSTACK tEOL { DEBUG_InfoStack(); } | |
| | tINFO tMAPS tEOL { DEBUG_InfoVirtual(); } | |
| | tINFO tWND expr_value tEOL { DEBUG_InfoWindow( (HWND)$3 ); | |
| DEBUG_FreeExprMem(); } | |
| | tINFO tLOCAL tEOL { DEBUG_InfoLocals(); } | |
| | tINFO tDISPLAY tEOL { DEBUG_InfoDisplay(); } | |
| walk_command: | |
| tWALK tCLASS tEOL { DEBUG_WalkClasses(); } | |
| | tWALK tMODULE tEOL { DEBUG_WalkModules(); } | |
| | tWALK tQUEUE tEOL { DEBUG_WalkQueues(); } | |
| | tWALK tWND tEOL { DEBUG_WalkWindows( 0, 0 ); } | |
| | tWALK tWND tNUM tEOL { DEBUG_WalkWindows( $3, 0 ); } | |
| | tWALK tPROCESS tEOL { DEBUG_WalkProcess(); } | |
| | tWALK tMODREF expr_value tEOL { DEBUG_WalkModref( $3 ); } | |
| type_cast: | |
| '(' type_expr ')' { $$ = $2; } | |
| type_expr: | |
| type_expr '*' { $$ = DEBUG_FindOrMakePointerType($1); } | |
| | tINT { $$ = DEBUG_TypeCast(DT_BASIC, "int"); } | |
| | tCHAR { $$ = DEBUG_TypeCast(DT_BASIC, "char"); } | |
| | tLONG tINT { $$ = DEBUG_TypeCast(DT_BASIC, "long int"); } | |
| | tUNSIGNED tINT { $$ = DEBUG_TypeCast(DT_BASIC, "unsigned int"); } | |
| | tLONG tUNSIGNED tINT { $$ = DEBUG_TypeCast(DT_BASIC, "long unsigned int"); } | |
| | tLONG tLONG tINT { $$ = DEBUG_TypeCast(DT_BASIC, "long long int"); } | |
| | tLONG tLONG tUNSIGNED tINT { $$ = DEBUG_TypeCast(DT_BASIC, "long long unsigned int"); } | |
| | tSHORT tINT { $$ = DEBUG_TypeCast(DT_BASIC, "short int"); } | |
| | tSHORT tUNSIGNED tINT { $$ = DEBUG_TypeCast(DT_BASIC, "short unsigned int"); } | |
| | tSIGNED tCHAR { $$ = DEBUG_TypeCast(DT_BASIC, "signed char"); } | |
| | tUNSIGNED tCHAR { $$ = DEBUG_TypeCast(DT_BASIC, "unsigned char"); } | |
| | tFLOAT { $$ = DEBUG_TypeCast(DT_BASIC, "float"); } | |
| | tDOUBLE { $$ = DEBUG_TypeCast(DT_BASIC, "double"); } | |
| | tLONG tDOUBLE { $$ = DEBUG_TypeCast(DT_BASIC, "long double"); } | |
| | tSTRUCT tIDENTIFIER { $$ = DEBUG_TypeCast(DT_STRUCT, $2); } | |
| | tUNION tIDENTIFIER { $$ = DEBUG_TypeCast(DT_STRUCT, $2); } | |
| | tENUM tIDENTIFIER { $$ = DEBUG_TypeCast(DT_ENUM, $2); } | |
| expr_addr: | |
| expr { $$ = DEBUG_EvalExpr($1); } | |
| expr_value: | |
| expr { DBG_VALUE value = DEBUG_EvalExpr($1); | |
| /* expr_value is typed as an integer */ | |
| if (!value.addr.off || | |
| !DEBUG_READ_MEM((void*)value.addr.off, &$$, sizeof($$))) | |
| $$ = 0; } | |
| /* | |
| * The expr rule builds an expression tree. When we are done, we call | |
| * EvalExpr to evaluate the value of the expression. The advantage of | |
| * the two-step approach is that it is possible to save expressions for | |
| * use in 'display' commands, and in conditional watchpoints. | |
| */ | |
| expr: | |
| tNUM { $$ = DEBUG_ConstExpr($1); } | |
| | tSTRING { $$ = DEBUG_StringExpr($1); } | |
| | tREG { $$ = DEBUG_RegisterExpr($1); } | |
| | tIDENTIFIER { $$ = DEBUG_SymbolExpr($1); } | |
| | expr OP_DRF tIDENTIFIER { $$ = DEBUG_StructPExpr($1, $3); } | |
| | expr '.' tIDENTIFIER { $$ = DEBUG_StructExpr($1, $3); } | |
| | tIDENTIFIER '(' ')' { $$ = DEBUG_CallExpr($1, 0); } | |
| | tIDENTIFIER '(' expr ')' { $$ = DEBUG_CallExpr($1, 1, $3); } | |
| | tIDENTIFIER '(' expr ',' expr ')' { $$ = DEBUG_CallExpr($1, 2, $3, $5); } | |
| | tIDENTIFIER '(' expr ',' expr ',' expr ')' { $$ = DEBUG_CallExpr($1, 3, $3, $5, $7); } | |
| | tIDENTIFIER '(' expr ',' expr ',' expr ',' expr ')' { $$ = DEBUG_CallExpr($1, 3, $3, $5, $7, $9); } | |
| | tIDENTIFIER '(' expr ',' expr ',' expr ',' expr ',' expr ')' { $$ = DEBUG_CallExpr($1, 3, $3, $5, $7, $9, $11); } | |
| | expr '[' expr ']' { $$ = DEBUG_BinopExpr(EXP_OP_ARR, $1, $3); } | |
| | expr ':' expr { $$ = DEBUG_BinopExpr(EXP_OP_SEG, $1, $3); } | |
| | expr OP_LOR expr { $$ = DEBUG_BinopExpr(EXP_OP_LOR, $1, $3); } | |
| | expr OP_LAND expr { $$ = DEBUG_BinopExpr(EXP_OP_LAND, $1, $3); } | |
| | expr '|' expr { $$ = DEBUG_BinopExpr(EXP_OP_OR, $1, $3); } | |
| | expr '&' expr { $$ = DEBUG_BinopExpr(EXP_OP_AND, $1, $3); } | |
| | expr '^' expr { $$ = DEBUG_BinopExpr(EXP_OP_XOR, $1, $3); } | |
| | expr OP_EQ expr { $$ = DEBUG_BinopExpr(EXP_OP_EQ, $1, $3); } | |
| | expr '>' expr { $$ = DEBUG_BinopExpr(EXP_OP_GT, $1, $3); } | |
| | expr '<' expr { $$ = DEBUG_BinopExpr(EXP_OP_LT, $1, $3); } | |
| | expr OP_GE expr { $$ = DEBUG_BinopExpr(EXP_OP_GE, $1, $3); } | |
| | expr OP_LE expr { $$ = DEBUG_BinopExpr(EXP_OP_LE, $1, $3); } | |
| | expr OP_NE expr { $$ = DEBUG_BinopExpr(EXP_OP_NE, $1, $3); } | |
| | expr OP_SHL expr { $$ = DEBUG_BinopExpr(EXP_OP_SHL, $1, $3); } | |
| | expr OP_SHR expr { $$ = DEBUG_BinopExpr(EXP_OP_SHR, $1, $3); } | |
| | expr '+' expr { $$ = DEBUG_BinopExpr(EXP_OP_ADD, $1, $3); } | |
| | expr '-' expr { $$ = DEBUG_BinopExpr(EXP_OP_SUB, $1, $3); } | |
| | expr '*' expr { $$ = DEBUG_BinopExpr(EXP_OP_MUL, $1, $3); } | |
| | expr '/' expr { $$ = DEBUG_BinopExpr(EXP_OP_DIV, $1, $3); } | |
| | expr '%' expr { $$ = DEBUG_BinopExpr(EXP_OP_REM, $1, $3); } | |
| | '-' expr %prec OP_SIGN { $$ = DEBUG_UnopExpr(EXP_OP_NEG, $2); } | |
| | '+' expr %prec OP_SIGN { $$ = $2; } | |
| | '!' expr { $$ = DEBUG_UnopExpr(EXP_OP_NOT, $2); } | |
| | '~' expr { $$ = DEBUG_UnopExpr(EXP_OP_LNOT, $2); } | |
| | '(' expr ')' { $$ = $2; } | |
| | '*' expr %prec OP_DEREF { $$ = DEBUG_UnopExpr(EXP_OP_DEREF, $2); } | |
| | '&' expr %prec OP_DEREF { $$ = DEBUG_UnopExpr(EXP_OP_ADDR, $2); } | |
| | type_cast expr %prec OP_DEREF { $$ = DEBUG_TypeCastExpr($1, $2); } | |
| /* | |
| * The lvalue rule builds an expression tree. This is a limited form | |
| * of expression that is suitable to be used as an lvalue. | |
| */ | |
| lval_addr: | |
| lval { $$ = DEBUG_EvalExpr($1); } | |
| lval: | |
| lvalue { $$ = $1; } | |
| | '*' expr { $$ = DEBUG_UnopExpr(EXP_OP_FORCE_DEREF, $2); } | |
| lvalue: | |
| tNUM { $$ = DEBUG_ConstExpr($1); } | |
| | tREG { $$ = DEBUG_RegisterExpr($1); } | |
| | tIDENTIFIER { $$ = DEBUG_SymbolExpr($1); } | |
| | lvalue OP_DRF tIDENTIFIER { $$ = DEBUG_StructPExpr($1, $3); } | |
| | lvalue '.' tIDENTIFIER { $$ = DEBUG_StructExpr($1, $3); } | |
| | lvalue '[' expr ']' { $$ = DEBUG_BinopExpr(EXP_OP_ARR, $1, $3); } | |
| %% | |
| static void issue_prompt(void) | |
| { | |
| #ifdef DONT_USE_READLINE | |
| fprintf(stderr, "Wine-dbg>"); | |
| #endif | |
| } | |
| static void mode_command(int newmode) | |
| { | |
| if ((newmode == 16) || (newmode == 32)) DEBUG_CurrThread->dbg_mode = newmode; | |
| else fprintf(stderr,"Invalid mode (use 16 or 32)\n"); | |
| } | |
| static WINE_EXCEPTION_FILTER(wine_dbg_cmd) | |
| { | |
| fprintf(stderr, "\nwine_dbg_cmd: "); | |
| switch (GetExceptionCode()) { | |
| case DEBUG_STATUS_INTERNAL_ERROR: | |
| fprintf(stderr, "WineDbg internal error\n"); | |
| break; | |
| case DEBUG_STATUS_NO_SYMBOL: | |
| fprintf(stderr, "Undefined symbol\n"); | |
| break; | |
| case DEBUG_STATUS_DIV_BY_ZERO: | |
| fprintf(stderr, "Division by zero\n"); | |
| break; | |
| case DEBUG_STATUS_BAD_TYPE: | |
| fprintf(stderr, "No type or type mismatch\n"); | |
| break; | |
| default: | |
| fprintf(stderr, "Exception %lx\n", GetExceptionCode()); | |
| break; | |
| } | |
| return EXCEPTION_EXECUTE_HANDLER; | |
| } | |
| /*********************************************************************** | |
| * DEBUG_Exit | |
| * | |
| * Kill current process. | |
| * | |
| */ | |
| void DEBUG_Exit( DWORD exit_code ) | |
| { | |
| TASK_KillTask( 0 ); /* FIXME: should not be necessary */ | |
| TerminateProcess( DEBUG_CurrProcess->handle, exit_code ); | |
| } | |
| /*********************************************************************** | |
| * DEBUG_Main | |
| * | |
| * Debugger main loop. | |
| */ | |
| BOOL DEBUG_Main( BOOL is_debug, BOOL force, DWORD code ) | |
| { | |
| int newmode; | |
| BOOL ret_ok; | |
| char ch; | |
| #ifdef YYDEBUG | |
| yydebug = 0; | |
| #endif | |
| yyin = stdin; | |
| DEBUG_SuspendExecution(); | |
| if (!is_debug) | |
| { | |
| #ifdef __i386__ | |
| if (DEBUG_IsSelectorSystem(DEBUG_context.SegCs)) | |
| fprintf( stderr, " in 32-bit code (0x%08lx).\n", DEBUG_context.Eip ); | |
| else | |
| fprintf( stderr, " in 16-bit code (%04x:%04lx).\n", | |
| (WORD)DEBUG_context.SegCs, DEBUG_context.Eip ); | |
| #else | |
| fprintf( stderr, " (%p).\n", GET_IP(&DEBUG_context) ); | |
| #endif | |
| } | |
| if (DEBUG_LoadEntryPoints("Loading new modules symbols:\n")) | |
| DEBUG_ProcessDeferredDebug(); | |
| if (force || !(is_debug && DEBUG_ShouldContinue( code, | |
| DEBUG_CurrThread->dbg_exec_mode, | |
| &DEBUG_CurrThread->dbg_exec_count ))) | |
| { | |
| DBG_ADDR addr; | |
| DEBUG_GetCurrentAddress( &addr ); | |
| #ifdef __i386__ | |
| switch (newmode = DEBUG_GetSelectorType(addr.seg)) { | |
| case 16: case 32: break; | |
| default: fprintf(stderr, "Bad CS (%ld)\n", addr.seg); newmode = 32; | |
| } | |
| #else | |
| newmode = 32; | |
| #endif | |
| if (newmode != DEBUG_CurrThread->dbg_mode) | |
| fprintf(stderr,"In %d bit mode.\n", DEBUG_CurrThread->dbg_mode = newmode); | |
| DEBUG_DoDisplay(); | |
| if (is_debug || force) | |
| { | |
| /* | |
| * Do a quiet backtrace so that we have an idea of what the situation | |
| * is WRT the source files. | |
| */ | |
| DEBUG_BackTrace(FALSE); | |
| } | |
| else | |
| { | |
| /* This is a real crash, dump some info */ | |
| DEBUG_InfoRegisters(); | |
| DEBUG_InfoStack(); | |
| #ifdef __i386__ | |
| if (DEBUG_CurrThread->dbg_mode == 16) | |
| { | |
| DEBUG_InfoSegments( DEBUG_context.SegDs >> 3, 1 ); | |
| if (DEBUG_context.SegEs != DEBUG_context.SegDs) | |
| DEBUG_InfoSegments( DEBUG_context.SegEs >> 3, 1 ); | |
| } | |
| DEBUG_InfoSegments( DEBUG_context.SegFs >> 3, 1 ); | |
| #endif | |
| DEBUG_BackTrace(TRUE); | |
| } | |
| if (!is_debug || | |
| (DEBUG_CurrThread->dbg_exec_mode == EXEC_STEPI_OVER) || | |
| (DEBUG_CurrThread->dbg_exec_mode == EXEC_STEPI_INSTR)) | |
| { | |
| /* Show where we crashed */ | |
| curr_frame = 0; | |
| DEBUG_PrintAddress( &addr, DEBUG_CurrThread->dbg_mode, TRUE ); | |
| fprintf(stderr,": "); | |
| DEBUG_Disasm( &addr, TRUE ); | |
| fprintf( stderr, "\n" ); | |
| } | |
| ret_ok = 0; | |
| do | |
| { | |
| __TRY | |
| { | |
| issue_prompt(); | |
| yyparse(); | |
| flush_symbols(); | |
| DEBUG_GetCurrentAddress( &addr ); | |
| if ((ret_ok = DEBUG_ValidateRegisters())) | |
| ret_ok = DEBUG_READ_MEM_VERBOSE((void*)DEBUG_ToLinear( &addr ), &ch, 1 ); | |
| } | |
| __EXCEPT(wine_dbg_cmd) | |
| { | |
| ret_ok = 0; | |
| } | |
| __ENDTRY; | |
| } while (!ret_ok); | |
| } | |
| DEBUG_CurrThread->dbg_exec_mode = DEBUG_RestartExecution( DEBUG_CurrThread->dbg_exec_mode, DEBUG_CurrThread->dbg_exec_count ); | |
| /* | |
| * This will have gotten absorbed into the breakpoint info | |
| * if it was used. Otherwise it would have been ignored. | |
| * In any case, we don't mess with it any more. | |
| */ | |
| if ((DEBUG_CurrThread->dbg_exec_mode == EXEC_CONT) || (DEBUG_CurrThread->dbg_exec_mode == EXEC_PASS)) | |
| DEBUG_CurrThread->dbg_exec_count = 0; | |
| return (DEBUG_CurrThread->dbg_exec_mode == EXEC_PASS) ? 0 : DBG_CONTINUE; | |
| } | |
| int yyerror(char* s) | |
| { | |
| fprintf(stderr,"%s\n", s); | |
| return 0; | |
| } |