| proc TkW:wineconf {DefaultConfFile} { |
| global WC_banner WC_driveSect WC_path WC_type WC_label WC_fstype |
| global EDIT SAVE REMOVE ADD WC_wineSect WC_windows WC_system WC_temp |
| global WC_Symbols WC_winepath WC_serialSect CLEAR WC_parallelSect |
| global WC_logSect WC_exclude WC_wineLook |
| global windowspath varpath syspath tmppath symbols winelook |
| global ndrives drive drivepath drivetype drivefstype drivelabel |
| global drivedevice driveserial |
| global resolution defaultfont |
| global readport writeport TKW WAITconf |
| global exclude default_progs startup allocsyscolors winelook wine_logfile |
| global com lpt spool nspool alias nalias |
| global WC_helpondrives WC_helponwine WC_helponserial WC_helponPP |
| global WC_helponmisc WAIT WC_quit WC_quit |
| global WC_quitreally WC_noquit |
| if {[winfo exist .choosemethod] } {destroy .choosemethod} |
| if {[winfo exist .install] } {destroy .install} |
| set base .wineconf |
| if {[winfo exists .wineconf]} { |
| wm deiconify .wineconf; return |
| } |
| ################### |
| # CREATING WIDGETS |
| ################### |
| toplevel .wineconf -class Toplevel \ |
| -background #3c1cfe |
| wm focusmodel .wineconf passive |
| wm geometry .wineconf 462x600+148+153 |
| wm maxsize .wineconf 1265 994 |
| wm minsize .wineconf 1 1 |
| wm overrideredirect .wineconf 0 |
| wm resizable .wineconf 1 1 |
| wm deiconify .wineconf |
| wm title .wineconf "TkWineSetup Configuring Wine" |
| #wm iconbitmap .wineconf @$TKW/setupfiles/images/setup2.xbm |
| #wm iconmask .wineconf @$TKW/setupfiles/images/setupmask2.xbm |
| |
| label .wineconf.lab18 \ |
| -background #fcfefe \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_banner |
| canvas .wineconf.can01 \ |
| -background #fee0b4 -borderwidth 2 -height 207 -relief ridge \ |
| -width 296 |
| label .wineconf.can01.lab22 \ |
| -background #fefefe \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_drivesSect |
| listbox .wineconf.can01.lis23 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -yscrollcommand {.wineconf.can01.scrDrives set } |
| scrollbar .wineconf.can01.scrDrives \ |
| -borderwidth 1 -orient vert -width 10 \ |
| -command { .wineconf.can01.lis23 yview } |
| listbox .wineconf.can01.lis24 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* |
| listbox .wineconf.can01.lis25 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* |
| listbox .wineconf.can01.lis26 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* |
| button .wineconf.can01.but28 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable ADD \ |
| -command {TkW:drives new} |
| button .wineconf.can01.but29 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -state disabled -text button -textvariable REMOVE \ |
| -command {TkW:delDrive $sel_drive} |
| button .wineconf.can01.but30 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -state disabled -text button -textvariable EDIT \ |
| -command {TkW:drives $sel_drive} |
| label .wineconf.can01.lab31 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_path |
| label .wineconf.can01.lab32 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_type |
| label .wineconf.can01.lab33 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_label |
| label .wineconf.can01.lab34 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_fstype |
| button .wineconf.can01.but51 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable HELP \ |
| -command {TkW:message $WC_helpondrives} |
| |
| |
| #section wine |
| |
| canvas .wineconf.can37 \ |
| -background #fedcdc -borderwidth 2 -height 207 -relief ridge \ |
| -width 296 |
| label .wineconf.can37.lab39 \ |
| -background #fefefe \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_wineSect |
| label .wineconf.can37.lab40 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_windows |
| label .wineconf.can37.lab41 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_system |
| button .wineconf.can37.but42 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -textvariable WC_winepath \ |
| -command TkW:editWinePath |
| |
| button .wineconf.can37.but43 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable HELP \ |
| -command {TkW:message $WC_helponwine} |
| entry .wineconf.can37.ent45 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -textvariable windowspath |
| entry .wineconf.can37.ent46 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -textvariable syspath |
| label .wineconf.can37.lab47 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_temp |
| label .wineconf.can37.lab48 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_Symbols |
| entry .wineconf.can37.ent49 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -textvariable tmppath |
| entry .wineconf.can37.ent50 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -textvariable symbols |
| |
| # section serialports |
| canvas .wineconf.can53 \ |
| -background #fedcdc -borderwidth 2 -relief ridge |
| label .wineconf.can53.lab57 \ |
| -background #fefefe \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_serialSect |
| listbox .wineconf.can53.lis58 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* |
| listbox .wineconf.can53.lis59 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -yscrollcommand {.wineconf.can53.scr60 set } |
| scrollbar .wineconf.can53.scr60 \ |
| -borderwidth 1 -orient vert -width 10 \ |
| -command { .wineconf.can53.lis59 yview } |
| button .wineconf.can53.but63 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable EDIT \ |
| -command {TkW:editports com} |
| button .wineconf.can53.but64 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable CLEAR -state disabled \ |
| -command { |
| set com([expr $sel_com + 1]) " " |
| TkW:setboxes |
| .wineconf.can53.but64 configure -state disabled |
| } |
| button .wineconf.can53.help \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable HELP\ |
| -command {TkW:message $WC_helponserial} |
| |
| #section parallelports |
| canvas .wineconf.can54 \ |
| -background #fedcdc -borderwidth 2 -relief ridge |
| label .wineconf.can54.lab65 \ |
| -background #fefefe \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_parallelSect |
| listbox .wineconf.can54.lis67 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -yscrollcommand {.wineconf.can54.scr71 set } |
| listbox .wineconf.can54.lis68 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* |
| button .wineconf.can54.but69 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable EDIT \ |
| -command {TkW:editports lpt} |
| button .wineconf.can54.but70 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable CLEAR -state disabled \ |
| -command { |
| set lpt([expr $sel_port + 1]) " " |
| TkW:setboxes |
| .wineconf.can54.but70 configure -state disabled |
| } |
| scrollbar .wineconf.can54.scr71 \ |
| -borderwidth 1 -orient vert -width 10 \ |
| -command {.wineconf.can54.lis67 yview} |
| button .wineconf.can54.help \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable HELP\ |
| -command {TkW:message $WC_helponPP} |
| |
| #sections spy et Tweak.Layout |
| canvas .wineconf.can55 \ |
| -background #fedcdc -borderwidth 2 -height 207 -relief ridge \ |
| -width 296 |
| label .wineconf.can55.lab72 \ |
| -background #fefefe \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_logSect |
| entry .wineconf.can55.ent74 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -textvariable wine_logfile |
| button .wineconf.can55.but75 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable WC_exclude |
| label .wineconf.can55.lab76 \ |
| -background #fefefe \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -relief groove -text label -textvariable WC_wineLook |
| menubutton .wineconf.can55.men78 \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -menu .wineconf.can55.men78.m -padx 4 -pady 3 -text menu \ |
| -textvariable winelook |
| menu .wineconf.can55.men78.m \ |
| -cursor {} -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* |
| .wineconf.can55.men78.m add command \ |
| -command {set winelook "Win31"} -label {Win 3.1} |
| .wineconf.can55.men78.m add command \ |
| -command {set winelook "Win95"} -label win95/98 |
| .wineconf.can55.men78.m add command \ |
| -command {set winelook "Win98"} -label {Win 98} |
| button .wineconf.can55.help \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable HELP \ |
| -command {TkW:message $WC_helponmisc} |
| |
| #main window buttons: |
| |
| button .wineconf.but80 \ |
| -command { |
| set WAIT wait |
| TkW:message2 $WC_quit $WC_quitreally $WC_noquit |
| while {$WAIT == "wait"} {update} |
| if {$WAIT == "opt1"} { if {[winfo exists .desktop]} { |
| destroy .wineconf |
| set WAITconf 0 |
| return |
| } else { |
| exit |
| } |
| } |
| } \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable QUIT |
| button .wineconf.save \ |
| -command TkW:writewinerc \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* -padx 9 \ |
| -pady 3 -text button -textvariable SAVE |
| ################### |
| # SETTING GEOMETRY |
| ################### |
| place .wineconf.lab18 \ |
| -x 3 -y 5 -width 453 -height 20 -anchor nw -bordermode ignore |
| |
| #placing drives sctions widgets: |
| place .wineconf.can01 \ |
| -x 5 -y 35 -width 466 -height 180 -anchor nw -bordermode ignore |
| place .wineconf.can01.lab22 \ |
| -x 0 -y 0 -width 443 -height 25 -anchor nw -bordermode ignore |
| place .wineconf.can01.lis23 \ |
| -x 10 -y 56 -width 130 -height 113 -anchor nw -bordermode ignore |
| place .wineconf.can01.lis24 \ |
| -x 139 -y 55 -width 85 -height 113 -anchor nw -bordermode ignore |
| place .wineconf.can01.lis25 \ |
| -x 223 -y 55 -width 65 -height 113 -anchor nw -bordermode ignore |
| place .wineconf.can01.lis26 \ |
| -x 288 -y 55 -width 65 -height 113 -anchor nw -bordermode ignore |
| place .wineconf.can01.scrDrives \ |
| -x 353 -y 55 -width 16 -height 113 -anchor nw -bordermode ignore |
| # bind lis23-26 |
| bind .wineconf.can01.lis23 <ButtonRelease> { |
| set sel_drive [ .wineconf.can01.lis23 nearest %y] |
| #enable related button |
| .wineconf.can01.but30 configure -state normal |
| .wineconf.can01.but29 configure -state normal |
| # disable the tow CLEAR buttons of ports: |
| .wineconf.can54.but70 configure -state disabled |
| .wineconf.can53.but64 configure -state disabled |
| } |
| bind .wineconf.can01.lis24 <ButtonRelease> { |
| set sel_drive [ .wineconf.can01.lis23 nearest %y] |
| .wineconf.can01.lis23 selection set $sel_drive |
| .wineconf.can01.but30 configure -state normal |
| .wineconf.can01.but29 configure -state normal |
| # disable the tow CLEAR buttons of ports: |
| .wineconf.can54.but70 configure -state disabled |
| .wineconf.can53.but64 configure -state disabled |
| } |
| bind .wineconf.can01.lis25 <ButtonRelease> { |
| set sel_drive [ .wineconf.can01.lis23 nearest %y] |
| .wineconf.can01.lis23 selection set $sel_drive |
| .wineconf.can01.but30 configure -state normal |
| .wineconf.can01.but29 configure -state normal |
| # disble the tow CLEAR buttons of ports: |
| .wineconf.can54.but70 configure -state disabled |
| .wineconf.can53.but64 configure -state disabled |
| } |
| bind .wineconf.can01.lis26 <ButtonRelease> { |
| set sel_drive [ .wineconf.can01.lis23 nearest %y] |
| .wineconf.can01.lis23 selection set $sel_drive |
| .wineconf.can01.but30 configure -state normal |
| .wineconf.can01.but29 configure -state normal |
| # disble the tow CLEAR buttons of ports: |
| .wineconf.can54.but70 configure -state disabled |
| .wineconf.can53.but64 configure -state disabled |
| } |
| place .wineconf.can01.but28 \ |
| -x 375 -y 44 -width 60 -height 28 -anchor nw -bordermode ignore |
| place .wineconf.can01.but29 \ |
| -x 375 -y 76 -width 60 -height 28 -anchor nw -bordermode ignore |
| place .wineconf.can01.but30 \ |
| -x 375 -y 110 -width 60 -height 28 -anchor nw -bordermode ignore |
| place .wineconf.can01.lab31 \ |
| -x 13 -y 36 -width 128 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can01.lab32 \ |
| -x 140 -y 36 -width 83 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can01.lab33 \ |
| -x 223 -y 36 -width 68 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can01.lab34 \ |
| -x 290 -y 36 -width 68 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can01.but51 \ |
| -x 375 -y 141 -width 60 -height 28 -anchor nw -bordermode ignore |
| |
| #placing wine sctions widgets: |
| |
| place .wineconf.can37 \ |
| -x 5 -y 230 -width 449 -height 115 -anchor nw -bordermode ignore |
| place .wineconf.can37.lab39 \ |
| -x 3 -y 1 -width 443 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can37.lab40 \ |
| -x 7 -y 29 -width 58 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can37.lab41 \ |
| -x 7 -y 55 -width 58 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can37.but42 \ |
| -x 7 -y 84 -width 248 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can37.but43 \ |
| -x 375 -y 80 -width 60 -height 28 -anchor nw -bordermode ignore |
| place .wineconf.can37.ent45 \ |
| -x 74 -y 26 -width 150 -height 24 -anchor nw -bordermode ignore |
| place .wineconf.can37.ent46 \ |
| -x 74 -y 52 -width 150 -height 24 -anchor nw -bordermode ignore |
| place .wineconf.can37.lab47 \ |
| -x 239 -y 29 -width 58 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can37.lab48 \ |
| -x 239 -y 54 -width 58 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can37.ent49 \ |
| -x 304 -y 26 -width 135 -height 24 -anchor nw -bordermode ignore |
| place .wineconf.can37.ent50 \ |
| -x 304 -y 52 -width 135 -height 24 -anchor nw -bordermode ignore |
| |
| #placing serialports sections widgets: |
| |
| place .wineconf.can53 \ |
| -x 9 -y 356 -width 144 -height 180 -anchor nw -bordermode ignore |
| place .wineconf.can53.lab57 \ |
| -x 3 -y 3 -width 138 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can53.lis58 \ |
| -x 3 -y 25 -width 40 -height 83 -anchor nw -bordermode ignore |
| place .wineconf.can53.lis59 \ |
| -x 44 -y 25 -width 85 -height 83 -anchor nw -bordermode ignore |
| # bind lis59 to select lis58 at the same time... |
| bind .wineconf.can53.lis58 <ButtonRelease> { |
| set sel_com [ .wineconf.can53.lis58 nearest %y] |
| .wineconf.can53.lis58 selection set $sel_com |
| #disbale other list related buttons: |
| .wineconf.can01.but30 configure -state disabled |
| .wineconf.can01.but29 configure -state disabled |
| # disable/enable the tow CLEAR buttons of ports: |
| .wineconf.can54.but70 configure -state disabled |
| .wineconf.can53.but64 configure -state normal |
| } |
| # bind lis58 to select lis59 at the same time... |
| bind .wineconf.can53.lis59 <ButtonRelease> { |
| set sel_com [ .wineconf.can53.lis59 nearest %y] |
| .wineconf.can53.lis58 selection set $sel_com |
| #disbale other list related buttons: |
| .wineconf.can01.but30 configure -state disabled |
| .wineconf.can01.but29 configure -state disabled |
| # disable/enable the tow CLEAR buttons of ports: |
| .wineconf.can54.but70 configure -state disabled |
| .wineconf.can53.but64 configure -state normal |
| } |
| place .wineconf.can53.scr60 \ |
| -x 123 -y 26 -width 16 -height 80 -anchor nw -bordermode ignore |
| place .wineconf.can53.but63 \ |
| -x 10 -y 115 -width 60 -height 28 -anchor nw -bordermode ignore |
| place .wineconf.can53.but64 \ |
| -x 78 -y 115 -width 60 -height 28 -anchor nw -bordermode ignore |
| place .wineconf.can53.help \ |
| -x 10 -y 145 -width 130 -height 28 -anchor nw -bordermode ignore |
| |
| #placing parallelports sections widgets: |
| |
| place .wineconf.can54 \ |
| -x 160 -y 356 -width 144 -height 180 -anchor nw -bordermode ignore |
| place .wineconf.can54.lab65 \ |
| -x 1 -y 3 -width 143 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can54.lis67 \ |
| -x 5 -y 26 -width 45 -height 83 -anchor nw -bordermode ignore |
| place .wineconf.can54.lis68 \ |
| -x 50 -y 25 -width 75 -height 83 -anchor nw -bordermode ignore |
| # bind lis67 |
| bind .wineconf.can54.lis68 <ButtonRelease> { |
| set sel_port [ .wineconf.can53.lis59 nearest %y] |
| #disbale other list related buttons: |
| .wineconf.can01.but30 configure -state disabled |
| .wineconf.can01.but29 configure -state disabled |
| # disable/enable the tow CLEAR buttons of ports: |
| .wineconf.can54.but70 configure -state normal |
| .wineconf.can53.but64 configure -state disabled |
| } |
| # bind lis68 to select lis67 at the same time... |
| bind .wineconf.can54.lis67 <ButtonRelease> { |
| set sel_port [ .wineconf.can53.lis59 nearest %y] |
| .wineconf.can54.lis67 selection set $sel_port |
| #disbale other list related buttons: |
| .wineconf.can01.but30 configure -state disabled |
| .wineconf.can01.but29 configure -state disabled |
| # disable/enable the tow CLEAR buttons of ports: |
| .wineconf.can54.but70 configure -state normal |
| .wineconf.can53.but64 configure -state disabled |
| } |
| place .wineconf.can54.but69 \ |
| -x 10 -y 115 -width 60 -height 28 -anchor nw -bordermode ignore |
| place .wineconf.can54.but70 \ |
| -x 78 -y 115 -width 60 -height 28 -anchor nw -bordermode ignore |
| place .wineconf.can54.scr71 \ |
| -x 123 -y 26 -width 16 -height 80 -anchor nw -bordermode ignore |
| place .wineconf.can54.help \ |
| -x 10 -y 145 -width 130 -height 28 -anchor nw -bordermode ignore |
| |
| #placing spy and Tweak.Layout sections widgets: |
| |
| place .wineconf.can55 \ |
| -x 313 -y 357 -width 139 -height 180 -anchor nw -bordermode ignore |
| place .wineconf.can55.lab72 \ |
| -x 3 -y 3 -width 133 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can55.ent74 \ |
| -x 5 -y 25 -width 130 -height 24 -anchor nw -bordermode ignore |
| place .wineconf.can55.but75 \ |
| -x 5 -y 50 -width 130 -height 28 -anchor nw -bordermode ignore |
| place .wineconf.can55.lab76 \ |
| -x 3 -y 83 -width 133 -height 20 -anchor nw -bordermode ignore |
| place .wineconf.can55.men78 \ |
| -x 10 -y 110 -width 122 -height 24 -anchor nw -bordermode ignore |
| place .wineconf.can55.help \ |
| -x 5 -y 145 -width 130 -height 28 -anchor nw -bordermode ignore |
| |
| #Main window buttons: |
| |
| pack .wineconf.but80 -padx 5 -pady 1 -side bottom -fill x |
| pack .wineconf.save -padx 5 -side bottom -fill x |
| |
| # initialise the arrays |
| TkW:initarrays |
| # Now start reading the .winerc (or the default wine.ini) |
| TkW:readwinerc $DefaultConfFile |
| # Set the listboxes: |
| TkW:setboxes |
| #updates the scollings |
| set WAITconf 1 |
| while {$WAITconf == 1} { TkW:scrollwindows } |
| } |
| |
| proc TkW:readwinerc {DefaultConfFile} { |
| global sect ndrives drive n rcout line wine_logfile winelook |
| global nspool nalias srcdest TKW |
| |
| TkW:debug "Entering readwinerc -----------------------------" |
| |
| # OPEN THE FILE Read-Only: |
| TkW:fixme "TkW:wineconf::\ |
| Detection of wine.ini will fail when ~/.winerc ~/wine.conf not there" |
| if {[file exist $DefaultConfFile] } then { |
| set winerc [open $DefaultConfFile r] |
| } else { |
| TkW:message "No file $DefaultConfFile... This is a TkWine error" |
| return |
| } |
| # Adds a fe setting in case they're missing (actually, they are in the std file) in the wine.ini |
| set winelook Win95 |
| set wine_logfile /tmp/winelog |
| |
| # OPEN /tmp/tkwwinerc for writting |
| set rcout [open /tmp/tkwinerc w] |
| |
| set ndrives -1 |
| set nspool 0 |
| set nalias -1 |
| global NDllOver NDllPairs DllPairs DllOver |
| set NDllOver 0 |
| set NDllPairs 0 |
| |
| # Read line by line |
| set charread 0 |
| while {$charread != -1} { |
| |
| set charread [gets $winerc line] |
| set line [string trim $line] |
| set n [expr $charread - 1] |
| set idok 0 |
| TkW:debug "READ:$line-$charread" |
| if {[string match ";*" $line]} { |
| #puts $rcout $line |
| TkW:debug Comment; set idok 1} |
| # The two lines below SHOULD work... they don't |
| #if {[string match "\[*\]" $line]} \ |
| #{TkW:debug Section;set idok 1} |
| ## a ugly replacement: |
| if {"[string range $line 0 0][string range $line $n $n]"\ |
| == "\[\]"} { |
| TkW:sections |
| set idok 1 |
| } |
| if {$idok != 1 && [string match "*=*" $line]} { |
| TkW:assign |
| TkW:debug Assignment |
| set idok 1 |
| } |
| if {!$idok && $charread > 0} { |
| TkW:debug "Error::Unknow line in .winerc" |
| puts "************Warning: Error in config \ |
| file ****************" |
| puts "Line $line incomprehensible" |
| } |
| } |
| } |
| |
| proc TkW:sections {} { |
| global sect ndrives drive n rcout line |
| global drivepath drivelabel drivetype drivefstype driveserial drivedevice |
| set sect [string tolower [string range $line 1 [expr $n - 1]]] |
| if {[string tolower [string range $sect 0 4]] == "drive"} { |
| set ndrives [expr $ndrives + 1] |
| set drive($ndrives) [string range $sect 6 6] |
| set drivepath($ndrives) "" |
| set drivelabel($ndrives) "" |
| set drivetype($ndrives) "" |
| set drivefstype($ndrives) "" |
| set driveserial($ndrives) "" |
| set drivedevice($ndrives) "" |
| set sect drive |
| TkW:debug "Section $sect $drive($ndrives)" |
| #puts $rcout "\[$sect $drive($ndrives)\]" |
| } else { |
| TkW:debug "Section $sect" |
| #puts $rcout "\[$sect]" |
| } |
| } |
| |
| proc TkW:assign {} { |
| global sect ndrives drive n rcout line |
| |
| global windowspath varpath syspath tmppath symbols winelook |
| global ndrives drive drivepath drivetype drivefstype drivelabel |
| global drivedevice driveserial |
| global resolution defaultfont |
| global readport writeport |
| global exclude default_progs startup allocsyscolors winelook wine_logfile |
| global com lpt spool nspool alias nalias |
| global NDllOver NDllPairs |
| global DllOver DllPairs |
| |
| set equalis [string first "=" $line ] |
| set varname [string tolower [string trim [string range $line 0 [expr $equalis - 1]]]] |
| set value [string trim [string range $line [expr $equalis + 1] $n]] |
| if {$varname == "default"} {set varname Default} |
| switch $varname { |
| {path} { |
| switch $sect { |
| {drive} {set drivepath($ndrives) $value} |
| {wine} {set varpath $value;update} |
| {default} {TkW:conferror $sect $varname $value} |
| } |
| } |
| {type} { |
| if {$sect != "drive"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set drivetype($ndrives) $value |
| } |
| } |
| {label} { |
| if {$sect != "drive"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set drivelabel($ndrives) $value |
| } |
| } |
| {serial} { |
| if {$sect != "drive"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set driveserial($ndrives) $value |
| } |
| } |
| {filesystem} { |
| if {$sect != "drive"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set drivefstype($ndrives) $value |
| } |
| } |
| {device} { |
| if {$sect != "drive"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set drivedevice($ndrives) $value |
| } |
| } |
| {windows} { |
| if {$sect != "wine"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set windowspath $value |
| } |
| } |
| {system} { |
| if {$sect != "wine"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set syspath $value |
| } |
| } |
| {temp} { |
| if {$sect != "wine"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set tmppath $value |
| } |
| } |
| {symboltablefile} { |
| if {$sect != "wine"} then { |
| TkW:conferror $sect\ |
| $varname $value |
| } else { |
| set symbols $value |
| } |
| } |
| {resolution} { |
| if {$sect != "fonts"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set resolution $value |
| } |
| } |
| {Default} { |
| switch $sect { |
| {fonts} { set defaultfont $value} |
| {programs} {set default_progs $value} |
| {default} { TkW:conferror \ |
| $sect $varname $value } |
| } |
| } |
| {read} { |
| if {$sect != "ports"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set readport $value |
| } |
| } |
| {write} { |
| if {$sect != "ports"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set writeport $value |
| } |
| } |
| {file} { |
| if {$sect != "spy"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set wine_logfile $value |
| } |
| } |
| {exclude} { |
| if {$sect != "spy"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set Exclude $value |
| } |
| } |
| {allocsystemcolors} { |
| if {$sect != "options"} then { |
| TkW:conferror $sect $varname\ |
| $value |
| } else { |
| set allocsyscolors $value |
| } |
| } |
| {winelook} { |
| if {$sect != "tweak.layout"} then { |
| TkW:conferror $sect $varname\ |
| $value |
| } else { |
| set winelook $value |
| } |
| } |
| {startup} { |
| if {$sect != "programs"} then { |
| TkW:conferror $sect $varname\ |
| $value |
| } else { |
| set startup $value |
| } |
| } |
| {printer} { |
| if {$sect != "wine"} then { |
| TkW:conferror $sect $varname\ |
| $value |
| } else { |
| set printer $value |
| } |
| } |
| {default} { |
| if {$sect == "dllpairs"} { |
| set NDllPairs [expr $NDllPairs + 1] |
| set DllPairs($NDllPairs) "$varname = $value" |
| return |
| } |
| if {$sect == "dlloverrides"} { |
| set NDllOver [expr $NDllOver + 1] |
| set DllOver($NDllOver) "$varname = $value" |
| return |
| } |
| if {[string tolower [string trim [string range $line 0 2]]] == "lpt" && [string range $line 4 4 ] == ":" } { |
| if {$sect != "spooler"} then { |
| TkW:conferror $sect $varname $value |
| } else { |
| set nspool [expr $nspool + 1] |
| set spool($nspool) $value |
| } |
| return |
| } |
| |
| set varname2 [string tolower [string trim \ |
| [string range $line 0 [expr $equalis - 2]]]] |
| set letter [string tolower [string range $line [expr $equalis - 1]\ |
| [expr $equalis - 1] ]] |
| #set varname2 [string tolower $varname2] |
| switch $varname2 { |
| |
| {com} { |
| if {$sect != "serialports"} then { |
| TkW:conferror $sect $varname\ |
| $value |
| } else { |
| set com($letter) $value |
| } |
| } |
| {lpt} { |
| if {$sect != "parallelports"} then { |
| TkW:conferror $sect $varname\ |
| $value |
| } else { |
| set lpt($letter) $value |
| } |
| } |
| |
| {alias} { |
| if {$sect != "fonts"} then { |
| TkW:conferror $sect $varname\ |
| $value |
| } else { |
| set nalias [expr $nalias + 1] |
| set alias($nalias) $value |
| } |
| } |
| {default} { |
| TkW:conferror $sect $varname $value |
| } |
| |
| |
| } |
| |
| |
| } |
| } |
| } |
| |
| proc TkW:conferror {sect varname value} { |
| |
| puts "ERROR IN CONFIG FILE, FOUND $varname=$value in section $sect" |
| } |
| |
| proc TkW:setboxes {} { |
| |
| global ndrives drive drivepath drivetype drivefstype drivelabel |
| global drivedevice driveserial |
| global com lpt |
| |
| .wineconf.can01.lis23 delete 0 end |
| .wineconf.can01.lis24 delete 0 end |
| .wineconf.can01.lis25 delete 0 end |
| .wineconf.can01.lis26 delete 0 end |
| |
| for {set i 0} {$i <= $ndrives } {set i [expr $i + 1]} { |
| |
| TkW:debug "Drive $i : $drive($i) $drivepath($i) $drivetype($i)\ |
| $drivelabel($i)" |
| TkW:debug " $drivefstype($i) $drivedevice($i) $driveserial($i)" |
| |
| set yes " " |
| if {![file isdirectory $drivepath($i)]} {set yes "*"} |
| .wineconf.can01.lis23 insert end \ |
| "$yes\($drive($i):\\) $drivepath($i) " |
| .wineconf.can01.lis24 insert end \ |
| "$yes$drivetype($i)" |
| .wineconf.can01.lis25 insert end \ |
| "$yes$drivelabel($i)" |
| .wineconf.can01.lis26 insert end \ |
| "$yes$drivefstype($i)" |
| } |
| |
| .wineconf.can53.lis59 delete 0 end |
| .wineconf.can53.lis58 delete 0 end |
| for {set i 1} {$i <= 8 } {set i [expr $i + 1]} { |
| .wineconf.can53.lis58 insert end "com$i" |
| .wineconf.can53.lis59 insert end $com($i) |
| } |
| .wineconf.can54.lis67 delete 0 end |
| .wineconf.can54.lis68 delete 0 end |
| for {set i 1} {$i <= 8 } {set i [expr $i + 1]} { |
| .wineconf.can54.lis67 insert end "lpt$i" |
| .wineconf.can54.lis68 insert end $lpt($i) |
| } |
| |
| } |
| |
| proc TkW:scrollwindows {} { |
| |
| global OldPos |
| |
| if {![info exists OldPos]} {set OldPos 0} |
| |
| # Serial |
| set lis58pos [.wineconf.can53.lis59 yview]; set a 1 |
| foreach i $lis58pos { if {$a} {set pos $i}; set a 0 } |
| .wineconf.can53.lis58 yview moveto $pos |
| # // ports |
| set lis67pos [.wineconf.can54.lis67 yview]; set a 1 |
| foreach i $lis67pos { if {$a} {set pos $i}; set a 0 } |
| .wineconf.can54.lis68 yview moveto $pos |
| # drives: |
| set lis23pos [.wineconf.can01.lis23 yview]; set a 1 |
| foreach i $lis23pos { if {$a} {set pos $i}; set a 0 } |
| if {$lis23pos != $OldPos} { |
| TkW:debug "listbox23 has move from $OldPos to $lis23pos" |
| TkW:debug "listbox24 goes to $pos " |
| } |
| set OldPos $lis23pos |
| .wineconf.can01.lis24 yview moveto $pos |
| .wineconf.can01.lis25 yview moveto $pos |
| .wineconf.can01.lis26 yview moveto $pos |
| |
| update |
| } |
| |
| proc TkW:initarrays {} { |
| |
| global com lpt spool |
| |
| for {set i 1 } {$i <= 8 } {set i [expr $i + 1]} { |
| set com($i) "" |
| set lpt($i) "" |
| } |
| for {set i 1 } {$i <= 8 } {set i [expr $i + 1]} { |
| set spool($i) "" |
| } |
| } |
| |
| proc TkW:editports {comlpt} { |
| |
| global OK CANCEL com portch lpt lptcom win banner TKW |
| global WC_confserial WC_confparallel WC_PPbanner WC_serialbanner |
| |
| .wineconf.can54.but69 configure -state disabled |
| .wineconf.can53.but63 configure -state disabled |
| |
| # this is a ugly trick as buttons command need a global variable, not an arg |
| set lptcom $comlpt |
| |
| if {$comlpt == "com"} then { |
| set win .comedit |
| set title $WC_confserial |
| set banner $WC_serialbanner |
| } else { |
| set win .lptedit |
| set title $WC_confparallel |
| set banner $WC_PPbanner |
| } |
| toplevel $win -class Toplevel \ |
| -background #3c1cfe |
| wm focusmodel $win passive |
| wm geometry $win 205x365+448+253 |
| wm maxsize $win 1265 994 |
| wm minsize $win 1 1 |
| wm overrideredirect $win 0 |
| wm resizable $win 1 1 |
| wm deiconify $win |
| wm title $win $title |
| #wm iconbitmap $win @$TKW/setupfiles/images/setup2.xbm |
| #wm iconmask $win @$TKW/setupfiles/images/setupmask2.xbm |
| |
| # creating the Banner |
| |
| label "$win.banner" \ |
| -background #dc96dc \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -relief groove -text $banner |
| |
| # creating the labels and entries |
| |
| for {set i 1} {$i <= 8} {set i [expr $i + 1 ]} { |
| |
| set portch($i) $com($i) |
| if {$comlpt == "com"} then { |
| set portch($i) $com($i) |
| } else { |
| set portch($i) $lpt($i) |
| } |
| |
| label "$win.lab$i" \ |
| -background #dc96dc \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -relief groove -text "Com$i" |
| entry "$win.ent$i" \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -textvariable portch($i) |
| set Y [expr 55 + $i * 30] |
| place "$win.lab$i"\ |
| -x 5 -y $Y -width 45 -height 28 \ |
| -anchor nw -bordermode ignore |
| place "$win.ent$i"\ |
| -x 55 -y $Y -width 145 -height 28 \ |
| -anchor nw -bordermode ignore |
| } |
| |
| button $win.but80 \ |
| -command { |
| for {set i 1} {$i <= 8} {set i [expr $i + 1]} { |
| if {$lptcom == "com"} then { |
| set com($i) $portch($i) |
| } else { |
| set lpt($i) $portch($i) |
| } |
| .wineconf.can54.but69 configure -state normal |
| .wineconf.can53.but63 configure -state normal |
| } |
| destroy $win |
| TkW:setboxes |
| } \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -padx 9 -pady 3 -text button -textvariable OK |
| place $win.banner -x 5 -y 5 -width 195 -height 70 |
| |
| place $win.but80 \ |
| -x 5 -y 335 -width 100 -height 28 \ |
| -anchor nw -bordermode ignore |
| button $win.but81 \ |
| -command {destroy $win |
| .wineconf.can54.but69 configure -state normal |
| .wineconf.can53.but63 configure -state normal |
| }\ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -padx 9 -pady 3 -text button -textvariable CANCEL \ |
| |
| place $win.but81 \ |
| -x 105 -y 335 -width 100 -height 28 \ |
| -anchor nw -bordermode ignore |
| |
| } |
| |
| proc TkW:drives {n} { |
| |
| global ndrives drive drivepath drivetype drivefstype drivelabel |
| global drivedevice driveserial TKW |
| global WC_confdrives HELP WCHLP WC_driveSetBanner |
| global chdrives1 chdrives2 chdrives3 chdrives4 |
| global chdrives5 chdrives6 chdrives7 |
| global win i num ch drOK |
| |
| set chdrives(1) $chdrives1 |
| set chdrives(2) $chdrives2 |
| set chdrives(3) $chdrives3 |
| set chdrives(4) $chdrives4 |
| set chdrives(5) $chdrives5 |
| set chdrives(6) $chdrives6 |
| set chdrives(7) $chdrives7 |
| |
| |
| if {$n == "new"} then { |
| set num [expr $ndrives + 1] |
| set ch(1) "" |
| set ch(2) "" |
| set ch(3) "" |
| set ch(4) "" |
| set ch(5) "" |
| set ch(6) "" |
| set ch(7) "" |
| } else { |
| set num $n |
| set ch(1) $drive($num) |
| set ch(2) $drivepath($num) |
| set ch(3) $drivetype($num) |
| set ch(4) $drivefstype($num) |
| set ch(5) $drivelabel($num) |
| set ch(6) $drivedevice($num) |
| set ch(7) $driveserial($num) |
| } |
| |
| TkW:debug "Entering TkW:drives - drive number: $num" |
| |
| .wineconf.can01.but28 configure -state disabled |
| .wineconf.can01.but29 configure -state disabled |
| .wineconf.can01.but30 configure -state disabled |
| # re-enable the tow EDIT buttons of ports: |
| .wineconf.can54.but69 configure -state disabled |
| .wineconf.can53.but63 configure -state disabled |
| |
| |
| set win .drivedit |
| set title $WC_confdrives |
| |
| toplevel $win -class Toplevel \ |
| -background #3c1cfe |
| wm focusmodel $win passive |
| wm geometry $win 305x325+448+253 |
| wm maxsize $win 1265 994 |
| wm minsize $win 1 1 |
| wm overrideredirect $win 0 |
| wm resizable $win 1 1 |
| wm deiconify $win |
| wm title $win $title |
| #wm iconbitmap $win @$TKW/setupfiles/images/setup2.xbm |
| #wm iconmask $win @$TKW/setupfiles/images/setupmask2.xbm |
| |
| # setting the banner: |
| |
| label "$win.banner" \ |
| -background #dc96dc \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -relief groove -text $WC_driveSetBanner -height 35 |
| |
| |
| |
| # creating the labels and entries |
| |
| # setting HELP buttons |
| button $win.hlp1\ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -padx 9 -pady 3 -text button -textvariable HELP \ |
| -command {TkW:message $WCHLP(1)} |
| button $win.hlp2\ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -padx 9 -pady 3 -text button -textvariable HELP \ |
| -command {TkW:message $WCHLP(2)} |
| button $win.hlp3\ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -padx 9 -pady 3 -text button -textvariable HELP \ |
| -command {TkW:message $WCHLP(3)} |
| button $win.hlp4\ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -padx 9 -pady 3 -text button -textvariable HELP \ |
| -command {TkW:message $WCHLP(4)} |
| button $win.hlp5\ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -padx 9 -pady 3 -text button -textvariable HELP \ |
| -command {TkW:message $WCHLP(5)} |
| button $win.hlp6\ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -padx 9 -pady 3 -text button -textvariable HELP \ |
| -command {TkW:message $WCHLP(6)} |
| button $win.hlp7\ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -padx 9 -pady 3 -text button -textvariable HELP \ |
| -command {TkW:message $WCHLP(7)} |
| |
| |
| for {set i 1} {$i <= 7} {set i [expr $i + 1 ]} { |
| |
| |
| label "$win.lab$i" \ |
| -background #dc96dc \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -relief groove -text $chdrives($i) |
| if {$i < 3 || $i > 4} then { |
| entry "$win.ent$i" \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -text text -textvariable ch($i) |
| } else { |
| menubutton $win.ent$i \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* \ |
| -menu $win.ent$i.m -padx 4 -pady 3 \ |
| -text text -textvariable ch($i) |
| } |
| # settings the menus: |
| if {$i == 3} then { |
| menu $win.ent$i.m \ |
| -cursor {} \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* |
| $win.ent$i.m add command \ |
| -command {set ch(3) "hd"} -label {Hard Drive} |
| $win.ent$i.m add command \ |
| -command {set ch(3) "floppy"} -label {Floppy} |
| $win.ent$i.m add command \ |
| -command {set ch(3) "cdrom"} -label {CDrom} |
| $win.ent$i.m add command \ |
| -command {set ch(3) "network"} \ |
| -label {network} |
| } |
| if {$i == 4} then { |
| menu $win.ent$i.m \ |
| -cursor {} \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-* |
| $win.ent$i.m add command \ |
| -command {set ch(4) "msdos"} -label {msdos} |
| $win.ent$i.m add command \ |
| -command {set ch(4) "win95"} -label {Win95} |
| $win.ent$i.m add command \ |
| -command {set ch(4) "Unix"} -label {Unix} |
| } |
| |
| |
| set Y [expr 40 + $i * 30] |
| place "$win.lab$i"\ |
| -x 5 -y $Y -width 145 -height 28 \ |
| -anchor nw -bordermode ignore |
| place "$win.ent$i"\ |
| -x 150 -y $Y -width 85 -height 28 \ |
| -anchor nw -bordermode ignore |
| place "$win.hlp$i"\ |
| -x 235 -y $Y -width 55 -height 28 \ |
| -anchor nw -bordermode ignore |
| |
| } |
| |
| |
| button $win.but80 \ |
| -command { |
| TkW:checkdrives |
| if {$drOK} { |
| set drive($num) $ch(1) |
| set drivepath($num) $ch(2) |
| set drivetype($num) $ch(3) |
| set drivefstype($num) $ch(4) |
| set drivelabel($num) $ch(5) |
| set drivedevice($num) $ch(6) |
| set driveserial($num) $ch(7) |
| destroy $win |
| if {$num > $ndrives} {set ndrives $num} |
| TkW:setboxes |
| .wineconf.can01.but28 configure -state normal |
| # re-enable the tow EDIT buttons of ports: |
| .wineconf.can54.but69 configure -state normal |
| .wineconf.can53.but63 configure -state normal |
| } |
| } \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -padx 9 -pady 3 -text button -textvariable OK \ |
| |
| place $win.but80 \ |
| -x 5 -y 290 -width 145 -height 28 \ |
| -anchor nw -bordermode ignore |
| button $win.but81 \ |
| -command { |
| destroy $win |
| .wineconf.can01.but28 configure -state normal |
| #.wineconf.can01.but29 configure -state normal |
| #.wineconf.can01.but30 configure -state normal |
| # re-enable the tow EDIT buttons of ports: |
| #.wineconf.can54.but69 configure -state normal |
| #.wineconf.can53.but63 configure -state normal |
| }\ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -padx 9 -pady 3 -text button -textvariable CANCEL \ |
| |
| place $win.but81 \ |
| -x 150 -y 290 -width 145 -height 28 \ |
| -anchor nw -bordermode ignore |
| place $win.banner -width 290 -height 35 -x 5 -y 5 |
| |
| } |
| proc TkW:checkdrives {} { |
| global ndrives ch num drOK drive |
| global WC_givepath WC_oneletter WC_usedletter WC_11letters |
| |
| if {[string length $ch(1)] != 1} { |
| TkW:message "$ch(1) $WC_oneletter" |
| set drOK 0 |
| return |
| } |
| if {[string length $ch(5)] > 11} { |
| TkW:message "$ch(5) $WC_11letters" |
| set drOK 0 |
| return |
| } |
| for {set i 0} {$i <=$ndrives} {set i [expr $i + 1]} { |
| if {$i != $num && [string tolower $ch(1)]\ |
| == [string tolower $drive($i)] } { |
| TkW:message "$ch(1)$WC_usedletter" |
| set drOK 0 |
| return |
| } |
| } |
| if { $ch(2) == ""} {TkW:message $WC_givepath; set drOK 0;return} |
| if { $ch(3) == ""} {set ch(3) hd} |
| if { $ch(4) == ""} {set ch(4) unix} |
| if { $ch(5) == ""} {set ch(5) "Drive $ch(1)"} |
| set drOK 1 |
| } |
| |
| proc TkW:editWinePath {} { |
| global OK varpath WC_editPathBanner WC_pathtitle TKW |
| TkW:debug "Entering TkW:editWinePath with path set to $varpath" |
| global ndrives dri |
| |
| # Create the toplevel |
| toplevel .editpath -class Toplevel \ |
| -background #3c1cfe |
| wm focusmodel .editpath passive |
| wm geometry .editpath 410x100+448+253 |
| wm maxsize .editpath 1265 994 |
| wm minsize .editpath 1 1 |
| wm overrideredirect .editpath 0 |
| wm resizable .editpath 1 1 |
| wm deiconify .editpath |
| wm title .editpath $WC_pathtitle |
| #wm iconbitmap .editpath @$TKW/setupfiles/images/setup2.xbm |
| #wm iconmask .editpath @$TKW/setupfiles/images/setupmask2.xbm |
| |
| #Creates the Banner |
| label .editpath.banner \ |
| -background #dc96dc \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -relief groove -text $WC_editPathBanner |
| #Creates the entry box |
| entry .editpath.ent \ |
| -background #dc96dc \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -relief groove -textvariable varpath |
| #Creates OK button |
| button .editpath.ok\ |
| -background #dc96dc \ |
| -font -Adobe-Helvetica-Medium-R-Normal-*-*-120-*-*-*-*-*-*\ |
| -relief groove -text $OK -command {destroy .editpath} |
| |
| place .editpath.banner -x 5 -y 5 -width 400 -height 30 |
| place .editpath.ent -x 5 -y 40 -width 400 -height 30 |
| place .editpath.ok -x 5 -y 70 -width 400 -height 30 |
| |
| } |
| |
| proc TkW:writewinerc {} { |
| |
| global windowspath varpath syspath tmppath symbols winelook |
| global ndrives drive drivepath drivetype drivefstype drivelabel |
| global drivedevice driveserial |
| global resolution defaultfont HOME |
| global readport writeport |
| global exclude default_progs startup allocsyscolors winelook wine_logfile |
| global com lpt spool nspool alias nalias |
| global NDllPairs NDllOver DllPairs DllOver |
| |
| # open file for writing:;; |
| |
| # move the old file: |
| if {[file exists ~/.winerc]} { |
| set free 1 |
| while {[file exists ~/.winerc.$free]} { |
| set free [expr $free + 1] |
| } |
| exec mv -f $HOME/.winerc $HOME/.winerc.$free |
| } |
| set out [open ~/.winerc w] |
| |
| # writes drives |
| # Puts the usual comments: |
| puts $out ";;" |
| puts $out ";; MS-DOS drives configuration " |
| puts $out ";;" |
| puts $out ";; Each section has the following format:" |
| puts $out ";; \[Drive X\]" |
| puts $out ";; Path=xxx (Unix path for drive root)" |
| puts $out ";; Type=xxx (supported types are 'floppy', 'hd', 'cdrom' and 'network')" |
| puts $out ";; Label=xxx (drive label, at most 11 characters)" |
| puts $out ";; Serial=xxx (serial number, 8 characters hexadecimal number)" |
| puts $out ";; Filesystem=xxx (supported types are 'msdos','win95','unix')" |
| puts $out ";; Device=/dev/xx (only if you want to allow raw device access)" |
| puts $out ";; " |
| for {set i 0} {$i <= $ndrives} {set i [expr $i + 1]} { |
| puts $out "\[Drive $drive($i)\]" |
| puts $out "Path=$drivepath($i)" |
| puts $out "Type=$drivetype($i)" |
| puts $out "Label=$drivelabel($i)" |
| if {$drivefstype($i) == ""} {set drivefstype($i) unix} |
| puts $out "Filesystem=$drivefstype($i)" |
| if {$driveserial($i) != "" } {puts $out "Serial=$driveserial($i)"} |
| if {$drivedevice($i) != "" } {puts $out "Device=$drivedevice($i)"} |
| puts $out "" |
| |
| } |
| #write wine section |
| puts $out "\[wine\]" |
| puts $out "Windows=$windowspath" |
| puts $out "System=$syspath" |
| puts $out "Temp=$tmppath" |
| puts $out "Path=$varpath" |
| puts $out "SymbolTableFile=$symbols" |
| puts $out "" |
| |
| # write options |
| TkW:fixme "Option not supported in wineconf, write de default" |
| puts $out "\[options\]" |
| puts $out "AllocSystemColors=$allocsyscolors" |
| puts $out "" |
| |
| # DllPairs: |
| puts $out "\[DllPairs\]" |
| for {set i 1} {$i <= $NDllPairs} {set i [expr $i + 1]} { |
| puts $out $DllPairs($i) |
| } |
| puts $out |
| # DllOverrides: |
| puts $out "\[DllOverrides\]" |
| for {set i 1} {$i <= $NDllOver} {set i [expr $i + 1]} { |
| puts $out $DllOver($i) |
| } |
| puts $out |
| # write fonts section |
| TkW:fixme "fonts support to be added to wineconf...." |
| puts $out "\[fonts\]" |
| puts $out ";Read documentation/fonts before adding aliases" |
| puts $out "Resolution = $resolution" |
| puts $out "Default = $defaultfont" |
| puts $out "" |
| # write serial |
| puts $out "\[serialports\]" |
| for {set i 1} {$i <= 8} {set i [expr $i + 1]} { |
| if {$com($i) != ""} {puts $out "Com$i=$com($i)"} |
| } |
| puts $out "" |
| # write parallel |
| puts $out "\[parallelports\]" |
| for {set i 1} {$i <= 8} {set i [expr $i + 1]} { |
| if {$lpt($i) != ""} {puts $out "Lpt$i=$lpt($i)"} |
| } |
| puts $out "" |
| # write spooler |
| puts $out "\[spooler\]" |
| for {set i 1} {$i <= 8} {set i [expr $i + 1]} { |
| if {$spool($i) != ""} {puts $out "LPT$i:=$spool($i)"} |
| } |
| puts $out "" |
| # write ports |
| puts $out "\[ports]" |
| if {[info exists readport]} {puts $out $readport} {puts $out ";read=0x779,0x379,0x280-0x2a0"} |
| if {[info exists writeport]} {puts $out $writeport} {puts $out ";write=0x779,0x379,0x280-0x2a0"} |
| puts $out "" |
| #write spy |
| puts $out "\[spy\]" |
| puts $out "file=$wine_logfile" |
| if {[info exists exclude]} {puts $out "Exclude=$exclude"} {puts $out "Exclude=WM_SIZE;WM_TIMER;"} |
| puts $out "" |
| #write Tweak.Layout |
| puts $out "\[Tweak.Layout\]" |
| puts $out ";; WineLook=xxx (supported styles are \'Win31\'(default), \'Win95\', \'Win98\')" |
| puts $out "WineLook=Win95" |
| } |
| proc TkW:delDrive {n} { |
| |
| global ndrives drive drivepath drivetype drivefstype drivelabel |
| global drivedevice driveserial |
| |
| TkW:debug "Remove drive [expr $n + 1]" |
| for {set i $n} {$i<$ndrives} {set i [expr $i +1]} { |
| set i1 [expr $i + 1] |
| set drive($i) $drive($i1) |
| set drivepath($i) $drivepath($i1) |
| set drivelabel($i) $drivelabel($i1) |
| set drivetype($i) $drivetype($i1) |
| set drivefstype($i) $drivefstype($i1) |
| set driveserial($i) $driveserial($i1) |
| } |
| set ndrives [expr $ndrives - 1] |
| TkW:setboxes |
| } |
