| S_OK The function completed successfully |
| S_FALSE Call successful, but returned FALSE |
| ERROR_FILE_NOT_FOUND The system cannot find the file specified. |
| ERROR_PATH_NOT_FOUND The system cannot find the path specified. |
| ERROR_TOO_MANY_OPEN_FILES The system cannot open the file. |
| ERROR_ACCESS_DENIED Access is denied. |
| ERROR_INVALID_HANDLE The handle is invalid. |
| ERROR_NOT_ENOUGH_MEMORY Not enough storage is available to process this command. |
| ERROR_INVALID_BLOCK The storage control block address is invalid. |
| ERROR_BAD_ENVIRONMENT The environment is incorrect. |
| ERROR_BAD_FORMAT An attempt was made to load a program with an incorrect format. |
| ERROR_OUTOFMEMORY The system cannot find the drive specified. |
| VFW_S_NO_MORE_ITEMS The end of the list has been reached. |
| VFW_S_DUPLICATE_NAME An attempt to add a filter with a duplicate name succeeded with a modified name. |
| VFW_S_STATE_INTERMEDIATE The state transition has not completed. |
| VFW_S_PARTIAL_RENDER Some of the streams in this movie are in an unsupported format. |
| VFW_S_SOME_DATA_IGNORED The file contained some property settings that were not used. |
| VFW_S_CONNECTIONS_DEFERRED Some connections have failed and have been deferred. |
| VFW_S_RESOURCE_NOT_NEEDED The resource specified is no longer needed. |
| VFW_S_MEDIA_TYPE_IGNORED A connection could not be made with the media type in the persistent graph, but has been made with a negotiated media type. |
| VFW_S_VIDEO_NOT_RENDERED Cannot play back the video stream: no suitable decompressor could be found. |
| VFW_S_AUDIO_NOT_RENDERED Cannot play back the audio stream: no audio hardware is available. |
| VFW_S_RPZA Cannot play back the video stream: format 'RPZA' is not supported. |
| VFW_S_ESTIMATED The value returned had to be estimated. Its accuracy cannot be guaranteed. |
| VFW_S_RESERVED This success code is reserved for internal purposes within ActiveMovie. |
| VFW_S_STREAM_OFF The stream has been turned off. |
| VFW_S_CANT_CUE The graph can't be cued because of lack of or corrupt data. |
| VFW_S_NO_STOP_TIME The stop time for the sample was not set. |
| VFW_S_NOPREVIEWPIN There was no preview pin available, so the capture pin output is being split to provide both capture and preview. |
| VFW_S_DVD_NON_ONE_SEQUENTIAL The current title was not a sequential set of chapters (PGC) and the returned timing information might not be continuous. |
| VFW_S_DVD_CHANNEL_CONTENTS_NOT_AVAILABLE The audio stream did not contain sufficient information to determine the contents of each channel. |
| VFW_S_DVD_NOT_ACCURATE The seek into the movie was not frame accurate. |
| DS_NO_VIRTUALIZATION The call succeeded, but we had to substitute the 3D algorithm |
| DS_INCOMPLETE The call succeeded, but not all of the optional effects were obtained. |
| DMUS_S_PARTIALLOAD The object could only load partially. This can happen if some components are not registered properly, such as embedded tracks and tools. This can also happen if some content is missing. For example, if a segment uses a DLS collection that is not in the loader's current search directory. |
| DMUS_S_PARTIALDOWNLOAD Return value from IDirectMusicBand::Download() which indicates that some of the instruments safely downloaded, but others failed. This usually occurs when some instruments are on PChannels not supported by the performance or port. |
| DMUS_S_REQUEUE Return value from IDirectMusicTool::ProcessPMsg() which indicates to the performance that it should cue the PMsg again automatically. |
| DMUS_S_FREE Return value from IDirectMusicTool::ProcessPMsg() which indicates to the performance that it should free the PMsg automatically. |
| DMUS_S_END Return value from IDirectMusicTrack::Play() which indicates to the segment that the track has no more data after mtEnd. |
| DMUS_S_STRING_TRUNCATED Returned string has been truncated to fit the buffer size. |
| DMUS_S_LAST_TOOL Returned from IDirectMusicGraph::StampPMsg() this indicates that the PMsg is already stamped with the last tool in the graph. The returned PMsg's tool pointer is now NULL. |
| DMUS_S_OVER_CHORD Returned from IDirectMusicPerformance::MusicToMIDI() this indicates that no note has been calculated because the music value has the note at a position higher than the top note of the chord. This applies only to DMUS_PLAYMODE_NORMALCHORD play mode. This success code indicates that the caller should not do anything with the note. It is not meant to be played against this chord. |
| DMUS_S_UP_OCTAVE Returned from IDirectMusicPerformance::MIDIToMusic() and IDirectMusicPerformance::MusicToMIDI() this indicates that the note conversion generated a note value that is below 0, so it has been bumped up one or more octaves to be in the proper MIDI range of 0 through 127. Note that this is valid for MIDIToMusic() when using play modes DMUS_PLAYMODE_FIXEDTOCHORD and DMUS_PLAYMODE_FIXEDTOKEY, both of which store MIDI values in wMusicValue. With MusicToMIDI() it is valid for all play modes. Of course, DMUS_PLAYMODE_FIXED will never return this success code. |
| DMUS_S_DOWN_OCTAVE Returned from IDirectMusicPerformance::MIDIToMusic() and IDirectMusicPerformance::MusicToMIDI() this indicates that the note conversion generated a note value that is above 127, so it has been bumped down one or more octaves to be in the proper MIDI range of 0 through 127. Note that this is valid for MIDIToMusic() when using play modes DMUS_PLAYMODE_FIXEDTOCHORD and DMUS_PLAYMODE_FIXEDTOKEY, both of which store MIDI values in wMusicValue. With MusicToMIDI() it is valid for all play modes. Of course, DMUS_PLAYMODE_FIXED will never return this success code. |
| DMUS_S_NOBUFFERCONTROL Although the audio output from the port will be routed to the same device as the given DirectSound buffer, buffer controls such as pan and volume will not affect the output. |
| DMUS_S_GARBAGE_COLLECTED The requested operation was not performed because during CollectGarbage the loader determined that the object had been released. |
| E_PENDING The data necessary to complete this operation is not yet available. |
| E_NOTIMPL The function called is not supported at this time |
| E_NOINTERFACE The requested COM interface is not available |
| E_POINTER Invalid pointer |
| E_ABORT Operation aborted |
| E_FAIL An undetermined error occurred |
| E_UNEXPECTED Catastrophic failure |
| CLASS_E_NOAGGREGATION This object does not support aggregation |
| REGDB_E_CLASSNOTREG Class not registered |
| CO_E_NOTINITIALIZED CoInitialize has not been called. |
| CO_E_ALREADYINITIALIZED CoInitialize has already been called. |
| DIERR_INSUFFICIENTPRIVS & VFW_E_INVALIDMEDIATYPE Unable to IDirectInputJoyConfig_Acquire because the user does not have sufficient privileges to change the joystick configuration. & An invalid media type was specified |
| DIERR_DEVICEFULL & VFW_E_INVALIDSUBTYPE The device is full. & An invalid media subtype was specified. |
| DIERR_MOREDATA & VFW_E_NEED_OWNER Not all the requested information fit into the buffer. & This object can only be created as an aggregated object. |
| DIERR_NOTDOWNLOADED & VFW_E_ENUM_OUT_OF_SYNC The effect is not downloaded. & The enumerator has become invalid. |
| DIERR_HASEFFECTS & VFW_E_ALREADY_CONNECTED The device cannot be reinitialized because there are still effects attached to it. & At least one of the pins involved in the operation is already connected. |
| DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active. |
| DIERR_INCOMPLETEEFFECT & VFW_E_NO_TYPES The effect could not be downloaded because essential information is missing. For example, no axes have been associated with the effect, or no type-specific information has been created. & One of the specified pins supports no media types. |
| DIERR_NOTBUFFERED & VFW_E_NO_ACCEPTABLE_TYPES Attempted to read buffered device data from a device that is not buffered. & There is no common media type between these pins. |
| DIERR_EFFECTPLAYING & VFW_E_INVALID_DIRECTION An attempt was made to modify parameters of an effect while it is playing. Not all hardware devices support altering the parameters of an effect while it is playing. & Two pins of the same direction cannot be connected together. |
| DIERR_UNPLUGGED & VFW_E_NOT_CONNECTED The operation could not be completed because the device is not plugged in. & The operation cannot be performed because the pins are not connected. |
| DIERR_REPORTFULL & VFW_E_NO_ALLOCATOR SendDeviceData failed because more information was requested to be sent than can be sent to the device. Some devices have restrictions on how much data can be sent to them. (For example, there might be a limit on the number of buttons that can be pressed at once.) & No sample buffer allocator is available. |
| DIERR_MAPFILEFAIL & VFW_E_RUNTIME_ERROR A mapper file function failed because reading or writing the user or IHV settings file failed. & A run-time error occurred. |
| VFW_E_BUFFER_NOTSET No buffer space has been set |
| VFW_E_BUFFER_OVERFLOW The buffer is not big enough. |
| VFW_E_BADALIGN An invalid alignment was specified. |
| VFW_E_ALREADY_COMMITTED Cannot change allocated memory while the filter is active. |
| VFW_E_BUFFERS_OUTSTANDING One or more buffers are still active. |
| VFW_E_NOT_COMMITTED Cannot allocate a sample when the allocator is not active. |
| VFW_E_SIZENOTSET Cannot allocate memory because no size has been set. |
| VFW_E_NO_CLOCK Cannot lock for synchronization because no clock has been defined. |
| VFW_E_NO_SINK Quality messages could not be sent because no quality sink has been defined. |
| VFW_E_NO_INTERFACE A required interface has not been implemented. |
| VFW_E_NOT_FOUND An object or name was not found. |
| VFW_E_CANNOT_CONNECT No combination of intermediate filters could be found to make the connection. |
| VFW_E_CANNOT_RENDER No combination of filters could be found to render the stream. |
| VFW_E_CHANGING_FORMAT Could not change formats dynamically. |
| VFW_E_NO_COLOR_KEY_SET No color key has been set. |
| VFW_E_NOT_OVERLAY_CONNECTION Current pin connection is not using the IOverlay transport. |
| VFW_E_NOT_SAMPLE_CONNECTION Current pin connection is not using the IMemInputPin transport. |
| VFW_E_PALETTE_SET Setting a color key would conflict with the palette already set. |
| VFW_E_COLOR_KEY_SET Setting a palette would conflict with the color key already set. |
| VFW_E_NO_COLOR_KEY_FOUND No matching color key is available. |
| VFW_E_NO_PALETTE_AVAILABLE No palette is available. |
| VFW_E_NO_DISPLAY_PALETTE Display does not use a palette. |
| VFW_E_TOO_MANY_COLORS Too many colors for the current display settings. |
| VFW_E_STATE_CHANGED The state changed while waiting to process the sample. |
| VFW_E_NOT_STOPPED The operation could not be performed because the filter is not stopped. |
| VFW_E_NOT_PAUSED The operation could not be performed because the filter is not paused. |
| VFW_E_NOT_RUNNING The operation could not be performed because the filter is not running. |
| VFW_E_WRONG_STATE The operation could not be performed because the filter is in the wrong state. |
| VFW_E_START_TIME_AFTER_END The sample start time is after the sample end time. |
| VFW_E_INVALID_RECT The supplied rectangle is invalid. |
| VFW_E_TYPE_NOT_ACCEPTED This pin cannot use the supplied media type. |
| VFW_E_SAMPLE_REJECTED This sample cannot be rendered. |
| VFW_E_SAMPLE_REJECTED_EOS This sample cannot be rendered because the end of the stream has been reached. |
| VFW_E_DUPLICATE_NAME An attempt to add a filter with a duplicate name failed. |
| VFW_E_TIMEOUT A time-out has expired. |
| VFW_E_INVALID_FILE_FORMAT The file format is invalid. |
| VFW_E_ENUM_OUT_OF_RANGE The list has already been exhausted. |
| VFW_E_CIRCULAR_GRAPH The filter graph is circular. |
| VFW_E_NOT_ALLOWED_TO_SAVE Updates are not allowed in this state. |
| VFW_E_TIME_ALREADY_PASSED An attempt was made to queue a command for a time in the past. |
| VFW_E_ALREADY_CANCELLED The queued command has already been canceled. |
| VFW_E_CORRUPT_GRAPH_FILE Cannot render the file because it is corrupt. |
| VFW_E_ADVISE_ALREADY_SET An overlay advise link already exists. |
| VFW_E_NO_MODEX_AVAILABLE No full-screen modes are available. |
| VFW_E_NO_ADVISE_SET This Advise cannot be canceled because it was not successfully set. |
| VFW_E_NO_FULLSCREEN A full-screen mode is not available. |
| VFW_E_IN_FULLSCREEN_MODE Cannot call IVideoWindow methods while in full-screen mode. |
| VFW_E_UNKNOWN_FILE_TYPE The media type of this file is not recognized. |
| VFW_E_CANNOT_LOAD_SOURCE_FILTER The source filter for this file could not be loaded. |
| VFW_E_FILE_TOO_SHORT A file appeared to be incomplete. |
| VFW_E_INVALID_FILE_VERSION The version number of the file is invalid. |
| VFW_E_INVALID_CLSID This file is corrupt: it contains an invalid class identifier. |
| VFW_E_INVALID_MEDIA_TYPE This file is corrupt: it contains an invalid media type. |
| VFW_E_SAMPLE_TIME_NOT_SET No time stamp has been set for this sample. |
| VFW_E_MEDIA_TIME_NOT_SET No media time stamp has been set for this sample. |
| VFW_E_NO_TIME_FORMAT_SET No media time format has been selected. |
| VFW_E_MONO_AUDIO_HW Cannot change balance because audio device is mono only. |
| VFW_E_NO_DECOMPRESSOR Cannot play back the video stream: no suitable decompressor could be found. |
| VFW_E_NO_AUDIO_HARDWARE Cannot play back the audio stream: no audio hardware is available, or the hardware is not responding. |
| VFW_E_RPZA Cannot play back the video stream: format 'RPZA' is not supported. |
| VFW_E_PROCESSOR_NOT_SUITABLE ActiveMovie cannot play MPEG movies on this processor. |
| VFW_E_UNSUPPORTED_AUDIO Cannot play back the audio stream: the audio format is not supported. |
| VFW_E_UNSUPPORTED_VIDEO Cannot play back the video stream: the video format is not supported. |
| VFW_E_MPEG_NOT_CONSTRAINED ActiveMovie cannot play this video stream because it falls outside the constrained standard. |
| VFW_E_NOT_IN_GRAPH Cannot perform the requested function on an object that is not in the filter graph. |
| VFW_E_NO_TIME_FORMAT Cannot get or set time related information on an object that is using a time format of TIME_FORMAT_NONE. |
| VFW_E_READ_ONLY The connection cannot be made because the stream is read only and the filter alters the data. |
| VFW_E_BUFFER_UNDERFLOW The buffer is not full enough. |
| VFW_E_UNSUPPORTED_STREAM Cannot play back the file. The format is not supported. |
| VFW_E_NO_TRANSPORT Pins cannot connect due to not supporting the same transport. |
| VFW_E_BAD_VIDEOCD The Video CD can't be read correctly by the device or is the data is corrupt. |
| VFW_E_OUT_OF_VIDEO_MEMORY There is not enough Video Memory at this display resolution and number of colors. Reducing resolution might help. |
| VFW_E_VP_NEGOTIATION_FAILED The VideoPort connection negotiation process has failed. |
| VFW_E_DDRAW_CAPS_NOT_SUITABLE Either DirectDraw has not been installed or the Video Card capabilities are not suitable. Make sure the display is not in 16 color mode. |
| VFW_E_NO_VP_HARDWARE No VideoPort hardware is available, or the hardware is not responding. |
| VFW_E_NO_CAPTURE_HARDWARE No Capture hardware is available, or the hardware is not responding. |
| VFW_E_DVD_OPERATION_INHIBITED This User Operation is inhibited by DVD Content at this time. |
| VFW_E_DVD_INVALIDDOMAIN This Operation is not permitted in the current domain. |
| VFW_E_DVD_NO_BUTTON The specified button is invalid or is not present at the current time, or there is no button present at the specified location. |
| VFW_E_DVD_GRAPHNOTREADY DVD-Video playback graph has not been built yet. |
| VFW_E_DVD_RENDERFAIL DVD-Video playback graph building failed. |
| VFW_E_DVD_DECNOTENOUGH DVD-Video playback graph could not be built due to insufficient decoders. |
| VFW_E_DDRAW_VERSION_NOT_SUITABLE Version number of DirectDraw not suitable. Make sure to install dx5 or higher version. |
| VFW_E_COPYPROT_FAILED Copy protection cannot be enabled. Please make sure any other copy protected content is not being shown now. |
| VFW_E_TIME_EXPIRED This object cannot be used anymore as its time has expired. |
| VFW_E_DVD_WRONG_SPEED The operation cannot be performed at the current playback speed. |
| VFW_E_DVD_MENU_DOES_NOT_EXIST The specified menu doesn't exist. |
| VFW_E_DVD_CMD_CANCELLED The specified command was either cancelled or no longer exists. |
| VFW_E_DVD_STATE_WRONG_VERSION The data did not contain a recognized version. |
| VFW_E_DVD_STATE_CORRUPT The state data was corrupt. |
| VFW_E_DVD_STATE_WRONG_DISC The state data is from a different disc. |
| VFW_E_DVD_INCOMPATIBLE_REGION The region was not compatible with the current drive. |
| VFW_E_DVD_NO_ATTRIBUTES The requested DVD stream attribute does not exist. |
| VFW_E_DVD_NO_GOUP_PGC Currently there is no GoUp (Annex J user function) program chain (PGC). |
| VFW_E_DVD_LOW_PARENTAL_LEVEL The current parental level was too low. |
| VFW_E_DVD_NOT_IN_KARAOKE_MODE The current audio is not karaoke content. |
| VFW_E_FRAME_STEP_UNSUPPORTED Frame step is not supported on this configuration. |
| VFW_E_DVD_STREAM_DISABLED The specified stream is disabled and cannot be selected. |
| VFW_E_DVD_TITLE_UNKNOWN The operation depends on the current title number, however the navigator has not yet entered the VTSM or the title domains, so the 'current' title index is unknown. |
| VFW_E_DVD_INVALID_DISC The specified path does not point to a valid DVD disc. |
| VFW_E_DVD_NO_RESUME_INFORMATION There is currently no resume information. |
| VFW_E_PIN_ALREADY_BLOCKED_ON_THIS_THREAD This thread has already blocked this output pin. There is no need to call IPinFlowControl::Block() again. |
| VFW_E_PIN_ALREADY_BLOCKED IPinFlowControl::Block() has been called on another thread. The current thread cannot make any assumptions about this pin's block state. |
| VFW_E_CERTIFICATION_FAILURE An operation failed due to a certification failure. |
| VFW_E_BAD_KEY A registry entry is corrupt. |
| DIERR_NOTFOUND The requested object does not exist. |
| E_ACCESSDENIED Access is denied |
| E_HANDLE Invalid handle |
| DIERR_NOTACQUIRED The operation cannot be performed unless the device is acquired. |
| E_OUTOFMEMORY Ran out of memory |
| DIERR_NOTINITIALIZED This object has not been initialized |
| DIERR_INPUTLOST Access to the device has been lost. It must be re-acquired. |
| E_INVALIDARG An invalid parameter was passed to the returning function |
| DIERR_BADDRIVERVER The object could not be created due to an incompatible driver version or mismatched or incomplete driver components. |
| DIERR_ACQUIRED The operation cannot be performed while the device is acquired. |
| DIERR_OLDDIRECTINPUTVERSION The application requires a newer version of DirectInput. |
| DIERR_BETADIRECTINPUTVERSION The application was written for an unsupported prerelease version of DirectInput. |
| E_PROP_ID_UNSUPPORTED The specified property ID is not supported for the specified property set. |
| E_PROP_SET_UNSUPPORTED The Specified property set is not supported. |
| DIERR_ALREADYINITIALIZED This object is already initialized |
| DDERR_ALREADYINITIALIZED This object is already initialized |
| DDERR_CANNOTATTACHSURFACE This surface cannot be attached to the requested surface. |
| DDERR_CANNOTDETACHSURFACE This surface cannot be detached from the requested surface. |
| DDERR_CURRENTLYNOTAVAIL Support is currently not available. |
| DDERR_EXCEPTION An exception was encountered while performing the requested operation |
| DDERR_HEIGHTALIGN Height of rectangle provided is not a multiple of reqd alignment |
| DDERR_INCOMPATIBLEPRIMARY Unable to match primary surface creation request with existing primary surface. |
| DDERR_INVALIDCAPS One or more of the caps bits passed to the callback are incorrect. |
| DDERR_INVALIDCLIPLIST DirectDraw does not support provided Cliplist. |
| DDERR_INVALIDMODE DirectDraw does not support the requested mode |
| DDERR_INVALIDOBJECT DirectDraw received a pointer that was an invalid DIRECTDRAW object. |
| DDERR_INVALIDPIXELFORMAT pixel format was invalid as specified |
| DDERR_INVALIDRECT Rectangle provided was invalid. |
| DDERR_LOCKEDSURFACES Operation could not be carried out because one or more surfaces are locked |
| DDERR_NO3D There is no 3D present. |
| DDERR_NOALPHAHW Operation could not be carried out because there is no alpha accleration hardware present or available. |
| DDERR_NOSTEREOHARDWARE Operation could not be carried out because there is no stereo hardware present or available. |
| DDERR_NOSURFACELEFT Operation could not be carried out because there is no hardware present which supports stereo surfaces |
| DDERR_NOCLIPLIST no clip list available |
| DDERR_NOCOLORCONVHW Operation could not be carried out because there is no color conversion hardware present or available. |
| DDERR_NOCOOPERATIVELEVELSET Create function called without DirectDraw object method SetCooperativeLevel being called. |
| DDERR_NOCOLORKEY Surface doesn't currently have a color key |
| DDERR_NOCOLORKEYHW Operation could not be carried out because there is no hardware support of the dest color key. |
| DDERR_NODIRECTDRAWSUPPORT No DirectDraw support possible with current display driver |
| DDERR_NOEXCLUSIVEMODE Operation requires the application to have exclusive mode but the application does not have exclusive mode. |
| DDERR_NOFLIPHW Flipping visible surfaces is not supported. |
| DDERR_NOGDI There is no GDI present. |
| DDERR_NOMIRRORHW Operation could not be carried out because there is no hardware present or available. |
| DDERR_NOTFOUND Requested item was not found |
| DDERR_NOOVERLAYHW Operation could not be carried out because there is no overlay hardware present or available. |
| DDERR_OVERLAPPINGRECTS Operation could not be carried out because the source and destination rectangles are on the same surface and overlap each other. |
| DDERR_NORASTEROPHW Operation could not be carried out because there is no appropriate raster op hardware present or available. |
| DDERR_NOROTATIONHW Operation could not be carried out because there is no rotation hardware present or available. |
| DDERR_NOSTRETCHHW Operation could not be carried out because there is no hardware support for stretching |
| DDERR_NOT4BITCOLOR DirectDrawSurface is not in 4 bit color palette and the requested operation requires 4 bit color palette. |
| DDERR_NOT4BITCOLORINDEX DirectDrawSurface is not in 4 bit color index palette and the requested operation requires 4 bit color index palette. |
| DDERR_NOT8BITCOLOR DirectDraw Surface is not in 8 bit color mode and the requested operation requires 8 bit color. |
| DDERR_NOTEXTUREHW Operation could not be carried out because there is no texture mapping hardware present or available. |
| DDERR_NOVSYNCHW Operation could not be carried out because there is no hardware support for vertical blank synchronized operations. |
| DDERR_NOZBUFFERHW Operation could not be carried out because there is no hardware support for zbuffer blitting. |
| DDERR_NOZOVERLAYHW Overlay surfaces could not be z layered based on their BltOrder because the hardware does not support z layering of overlays. |
| DDERR_OUTOFCAPS The hardware needed for the requested operation has already been allocated. |
| DDERR_OVERLAYCANTCLIP hardware does not support clipped overlays |
| DDERR_OVERLAYCOLORKEYONLYONEACTIVE Can only have one color key active at one time for overlays |
| DDERR_PALETTEBUSY Access to this palette is being refused because the palette is already locked by another thread. |
| DDERR_COLORKEYNOTSET No src color key specified for this operation. |
| DDERR_SURFACEALREADYATTACHED This surface is already attached to the surface it is being attached to. |
| DDERR_SURFACEALREADYDEPENDENT This surface is already a dependency of the surface it is being made a dependency of. |
| DDERR_SURFACEBUSY Access to this surface is being refused because the surface is already locked by another thread. |
| DDERR_CANTLOCKSURFACE Access to this surface is being refused because no driver exists which can supply a pointer to the surface. This is most likely to happen when attempting to lock the primary surface when no DCI provider is present. Will also happen on attempts to lock an optimized surface. |
| DDERR_SURFACEISOBSCURED Access to Surface refused because Surface is obscured. |
| DDERR_SURFACELOST Access to this surface is being refused because the surface is gone. The DIRECTDRAWSURFACE object representing this surface should have Restore called on it. |
| DDERR_SURFACENOTATTACHED The requested surface is not attached. |
| DDERR_TOOBIGHEIGHT Height requested by DirectDraw is too large. |
| DDERR_TOOBIGSIZE Size requested by DirectDraw is too large -- The individual height and width are OK. |
| DDERR_TOOBIGWIDTH Width requested by DirectDraw is too large. |
| DDERR_UNSUPPORTEDFORMAT Pixel format requested is unsupported by DirectDraw |
| DDERR_UNSUPPORTEDMASK Bitmask in the pixel format requested is unsupported by DirectDraw |
| DDERR_INVALIDSTREAM The specified stream contains invalid data |
| DDERR_VERTICALBLANKINPROGRESS vertical blank is in progress |
| DDERR_WASSTILLDRAWING Informs DirectDraw that the previous Blt which is transferring information to or from this Surface is incomplete. |
| DDERR_DDSCAPSCOMPLEXREQUIRED The specified surface type requires specification of the COMPLEX flag |
| DDERR_XALIGN Rectangle provided was not horizontally aligned on reqd. boundary |
| DDERR_INVALIDDIRECTDRAWGUID The GUID passed to DirectDrawCreate is not a valid DirectDraw driver identifier. |
| DDERR_DIRECTDRAWALREADYCREATED A DirectDraw object representing this driver has already been created for this process. |
| DDERR_NODIRECTDRAWHW A hardware only DirectDraw object creation was attempted but the driver did not support any hardware. |
| DDERR_PRIMARYSURFACEALREADYEXISTS this process already has created a primary surface |
| DDERR_NOEMULATION software emulation not available. |
| DDERR_REGIONTOOSMALL region passed to Clipper::GetClipList is too small. |
| DDERR_CLIPPERISUSINGHWND an attempt was made to set a clip list for a clipper object that is already monitoring an hwnd. |
| DDERR_NOCLIPPERATTACHED No clipper object attached to surface object |
| DDERR_NOHWND Clipper notification requires an HWND or no HWND has previously been set as the CooperativeLevel HWND. |
| DDERR_HWNDSUBCLASSED HWND used by DirectDraw CooperativeLevel has been subclassed, this prevents DirectDraw from restoring state. |
| DDERR_HWNDALREADYSET The CooperativeLevel HWND has already been set. It cannot be reset while the process has surfaces or palettes created. |
| DDERR_NOPALETTEATTACHED No palette object attached to this surface. |
| DDERR_NOPALETTEHW No hardware support for 16 or 256 color palettes. |
| DDERR_BLTFASTCANTCLIP If a clipper object is attached to the source surface passed into a BltFast call. |
| DDERR_NOBLTHW No blter. |
| DDERR_NODDROPSHW No DirectDraw ROP hardware. |
| DDERR_OVERLAYNOTVISIBLE returned when GetOverlayPosition is called on a hidden overlay |
| DDERR_NOOVERLAYDEST returned when GetOverlayPosition is called on an overlay that UpdateOverlay has never been called on to establish a destination. |
| DDERR_INVALIDPOSITION returned when the position of the overlay on the destination is no longer legal for that destionation. |
| DDERR_NOTAOVERLAYSURFACE returned when an overlay member is called for a non-overlay surface |
| DDERR_EXCLUSIVEMODEALREADYSET An attempt was made to set the cooperative level when it was already set to exclusive. |
| DDERR_NOTFLIPPABLE An attempt has been made to flip a surface that is not flippable. |
| DDERR_CANTDUPLICATE Can't duplicate primary & 3D surfaces, or surfaces that are implicitly created. |
| DDERR_NOTLOCKED Surface was not locked. An attempt to unlock a surface that was not locked at all, or by this process, has been attempted. |
| DDERR_CANTCREATEDC Windows cannot create any more DCs, or a DC was requested for a palette-indexed surface when the surface had no palette AND the display mode was not palette-indexed (in this case DirectDraw cannot select a proper palette into the DC) |
| DDERR_NODC No DC was ever created for this surface. |
| DDERR_WRONGMODE This surface cannot be restored because it was created in a different mode. |
| DDERR_IMPLICITLYCREATED This surface cannot be restored because it is an implicitly created surface. |
| DDERR_NOTPALETTIZED The surface being used is not a palette-based surface |
| DDERR_UNSUPPORTEDMODE The display is currently in an unsupported mode |
| DDERR_NOMIPMAPHW Operation could not be carried out because there is no mip-map texture mapping hardware present or available. |
| DDERR_INVALIDSURFACETYPE The requested action could not be performed because the surface was of the wrong type. |
| DDERR_NOOPTIMIZEHW Device does not support optimized surfaces, therefore no video memory optimized surfaces |
| DDERR_NOTLOADED Surface is an optimized surface, but has not yet been allocated any memory |
| DDERR_NOFOCUSWINDOW Attempt was made to create or set a device window without first setting the focus window |
| DDERR_NOTONMIPMAPSUBLEVEL Attempt was made to set a palette on a mipmap sublevel |
| DDERR_DCALREADYCREATED A DC has already been returned for this surface. Only one DC can be retrieved per surface. |
| DDERR_NONONLOCALVIDMEM An attempt was made to allocate non-local video memory from a device that does not support non-local video memory. |
| DDERR_CANTPAGELOCK The attempt to page lock a surface failed. |
| DDERR_CANTPAGEUNLOCK The attempt to page unlock a surface failed. |
| DDERR_NOTPAGELOCKED An attempt was made to page unlock a surface with no outstanding page locks. |
| DDERR_MOREDATA There is more data available than the specified buffer size could hold |
| DDERR_EXPIRED The data has expired and is therefore no longer valid. |
| DDERR_TESTFINISHED The mode test has finished executing. |
| DDERR_NEWMODE The mode test has switched to a new mode. |
| DDERR_D3DNOTINITIALIZED D3D has not yet been initialized. |
| DDERR_VIDEONOTACTIVE The video port is not active |
| DDERR_NOMONITORINFORMATION The monitor does not have EDID data. |
| DDERR_NODRIVERSUPPORT The driver does not enumerate display mode refresh rates. |
| DDERR_DEVICEDOESNTOWNSURFACE Surfaces created by one direct draw device cannot be used directly by another direct draw device. |
| DSERR_ALLOCATED The call failed because resources (such as a priority level) were already being used by another caller |
| DSERR_CONTROLUNAVAIL The control (vol, pan, etc.) requested by the caller is not available |
| DSERR_INVALIDCALL This call is not valid for the current state of this object |
| DSERR_PRIOLEVELNEEDED The caller does not have the priority level required for the function to succeed |
| DSERR_BADFORMAT The specified WAVE format is not supported |
| DSERR_NODRIVER No sound driver is available for use |
| DSERR_ALREADYINITIALIZED This object is already initialized |
| DSERR_BUFFERLOST The buffer memory has been lost, and must be restored |
| DSERR_OTHERAPPHASPRIO Another app has a higher priority level, preventing this call from succeeding |
| DSERR_UNINITIALIZED This object has not been initialized |
| DSERR_BUFFERTOOSMALL Tried to create a DSBCAPS_CTRLFX buffer shorter than DSBSIZE_FX_MIN milliseconds |
| DSERR_DS8_REQUIRED Attempt to use DirectSound 8 functionality on an older DirectSound object |
| DSERR_SENDLOOP A circular loop of send effects was detected |
| DSERR_BADSENDBUFFERGUID The GUID specified in an audiopath file does not match a valid MIXIN buffer |
| DMUS_E_DRIVER_FAILED An unexpected error was returned from a device driver, indicating possible failure of the driver or hardware. |
| DMUS_E_PORTS_OPEN The requested operation cannot be performed while there are instantiated ports in any process in the system. |
| DMUS_E_DEVICE_IN_USE The requested device is already in use (possibly by a non-DirectMusic client) and cannot be opened again. |
| DMUS_E_INSUFFICIENTBUFFER Buffer is not large enough for requested operation. |
| DMUS_E_BUFFERNOTSET No buffer was prepared for the download data. |
| DMUS_E_BUFFERNOTAVAILABLE Download failed due to inability to access or create download buffer. |
| DMUS_E_NOTADLSCOL Error parsing DLS collection. File is corrupt. |
| DMUS_E_INVALIDOFFSET Wave chunks in DLS collection file are at incorrect offsets. |
| DMUS_E_ALREADY_LOADED Second attempt to load a DLS collection that is currently open. |
| DMUS_E_INVALIDPOS Error reading wave data from DLS collection. Indicates bad file. |
| DMUS_E_INVALIDPATCH There is no instrument in the collection that matches patch number. |
| DMUS_E_CANNOTSEEK The IStream* doesn't support Seek(). |
| DMUS_E_CANNOTWRITE The IStream* doesn't support Write(). |
| DMUS_E_CHUNKNOTFOUND The RIFF parser doesn't contain a required chunk while parsing file. |
| DMUS_E_INVALID_DOWNLOADID Invalid download id was used in the process of creating a download buffer. |
| DMUS_E_NOT_DOWNLOADED_TO_PORT Tried to unload an object that was not downloaded or previously unloaded. |
| DMUS_E_ALREADY_DOWNLOADED Buffer was already downloaded to synth. |
| DMUS_E_UNKNOWN_PROPERTY The specified property item was not recognized by the target object. |
| DMUS_E_SET_UNSUPPORTED The specified property item may not be set on the target object. |
| DMUS_E_GET_UNSUPPORTED * The specified property item may not be retrieved from the target object. |
| DMUS_E_NOTMONO Wave chunk has more than one interleaved channel. DLS format requires MONO. |
| DMUS_E_BADARTICULATION Invalid articulation chunk in DLS collection. |
| DMUS_E_BADINSTRUMENT Invalid instrument chunk in DLS collection. |
| DMUS_E_BADWAVELINK Wavelink chunk in DLS collection points to invalid wave. |
| DMUS_E_NOARTICULATION Articulation missing from instrument in DLS collection. |
| DMUS_E_NOTPCM Downoaded DLS wave is not in PCM format. |
| DMUS_E_BADWAVE Bad wave chunk in DLS collection |
| DMUS_E_BADOFFSETTABLE Offset Table for download buffer has errors. |
| DMUS_E_UNKNOWNDOWNLOAD Attempted to download unknown data type. |
| DMUS_E_NOSYNTHSINK The operation could not be completed because no sink was connected to the synthesizer. |
| DMUS_E_ALREADYOPEN An attempt was made to open the software synthesizer while it was already open. |
| DMUS_E_ALREADYCLOSED An attempt was made to close the software synthesizer while it was already open. |
| DMUS_E_SYNTHNOTCONFIGURED The operation could not be completed because the software synth has not yet been fully configured. |
| DMUS_E_SYNTHACTIVE The operation cannot be carried out while the synthesizer is active. |
| DMUS_E_CANNOTREAD An error occurred while attempting to read from the IStream* object. |
| DMUS_E_DMUSIC_RELEASED The operation cannot be performed because the final instance of the DirectMusic object was released. Ports cannot be used after final release of the DirectMusic object. |
| DMUS_E_BUFFER_EMPTY There was no data in the referenced buffer. |
| DMUS_E_BUFFER_FULL There is insufficient space to insert the given event into the buffer. |
| DMUS_E_PORT_NOT_CAPTURE The given operation could not be carried out because the port is a capture port. |
| DMUS_E_PORT_NOT_RENDER The given operation could not be carried out because the port is a render port. |
| DMUS_E_DSOUND_NOT_SET The port could not be created because no DirectSound has been specified. Specify a DirectSound interface via the IDirectMusic::SetDirectSound method; pass NULL to have DirectMusic manage usage of DirectSound. |
| DMUS_E_ALREADY_ACTIVATED The operation cannot be carried out while the port is active. |
| DMUS_E_INVALIDBUFFER Invalid DirectSound buffer was handed to port. |
| DMUS_E_WAVEFORMATNOTSUPPORTED Invalid buffer format was handed to the synth sink. |
| DMUS_E_SYNTHINACTIVE The operation cannot be carried out while the synthesizer is inactive. |
| DMUS_E_DSOUND_ALREADY_SET IDirectMusic::SetDirectSound has already been called. It may not be changed while in use. |
| DMUS_E_INVALID_EVENT The given event is invalid (either it is not a valid MIDI message or it makes use of running status). The event cannot be packed into the buffer. |
| DMUS_E_UNSUPPORTED_STREAM The IStream* object does not contain data supported by the loading object. |
| DMUS_E_ALREADY_INITED The object has already been initialized. |
| DMUS_E_INVALID_BAND The file does not contain a valid band. |
| DMUS_E_TRACK_HDR_NOT_FIRST_CK The IStream* object's data does not have a track header as the first chunk, and therefore cannot be read by the segment object. |
| DMUS_E_TOOL_HDR_NOT_FIRST_CK The IStream* object's data does not have a tool header as the first chunk, and therefore cannot be read by the graph object. |
| DMUS_E_INVALID_TRACK_HDR The IStream* object's data contains an invalid track header (ckid is 0 and fccType is NULL,) and therefore cannot be read by the segment object. |
| DMUS_E_INVALID_TOOL_HDR The IStream* object's data contains an invalid tool header (ckid is 0 and fccType is NULL,) and therefore cannot be read by the graph object. |
| DMUS_E_ALL_TOOLS_FAILED The graph object was unable to load all tools from the IStream* object data. This may be due to errors in the stream, or the tools being incorrectly registered on the client. |
| DMUS_E_ALL_TRACKS_FAILED The segment object was unable to load all tracks from the IStream* object data. This may be due to errors in the stream, or the tracks being incorrectly registered on the client. |
| DSERR_OBJECTNOTFOUND The object requested was not found (numerically equal to DMUS_E_NOT_FOUND) |
| DMUS_E_NOT_INIT A required object is not initialized or failed to initialize. |
| DMUS_E_TYPE_DISABLED The requested parameter type is currently disabled. Parameter types may be enabled and disabled by certain calls to SetParam(). |
| DMUS_E_TYPE_UNSUPPORTED The requested parameter type is not supported on the object. |
| DMUS_E_TIME_PAST The time is in the past, and the operation cannot succeed. |
| DMUS_E_TRACK_NOT_FOUND The requested track is not contained by the segment. |
| DMUS_E_TRACK_NO_CLOCKTIME_SUPPORT The track does not support clock time playback or getparam. |
| DMUS_E_NO_MASTER_CLOCK There is no master clock in the performance. Be sure to call IDirectMusicPerformance::Init(). |
| DMUS_E_LOADER_NOCLASSID The class id field is required and missing in the DMUS_OBJECTDESC. |
| DMUS_E_LOADER_BADPATH The requested file path is invalid. |
| DMUS_E_LOADER_FAILEDOPEN File open failed - either file doesn't exist or is locked. |
| DMUS_E_LOADER_FORMATNOTSUPPORTED Search data type is not supported. |
| DMUS_E_LOADER_FAILEDCREATE Unable to find or create object. |
| DMUS_E_LOADER_OBJECTNOTFOUND Object was not found. |
| DMUS_E_LOADER_NOFILENAME The file name is missing from the DMUS_OBJECTDESC. |
| DMUS_E_INVALIDFILE The file requested is not a valid file. |
| DMUS_E_ALREADY_EXISTS The tool is already contained in the graph. Create a new instance. |
| DMUS_E_OUT_OF_RANGE Value is out of range, for instance the requested length is longer than the segment. |
| DMUS_E_SEGMENT_INIT_FAILED Segment initialization failed, most likely due to a critical memory situation. |
| DMUS_E_ALREADY_SENT The DMUS_PMSG has already been sent to the performance object via IDirectMusicPerformance::SendPMsg(). |
| DMUS_E_CANNOT_FREE The DMUS_PMSG was either not allocated by the performance via IDirectMusicPerformance::AllocPMsg() or it was already freed via IDirectMusicPerformance::FreePMsg(). |
| DMUS_E_CANNOT_OPEN_PORT The default system port could not be opened. |
| DMUS_E_CANNOT_CONVERT A call to MIDIToMusic() or MusicToMIDI() resulted in an error because the requested conversion could not happen. This usually occurs when the provided DMUS_CHORD_KEY structure has an invalid chord or scale pattern. |
| DMUS_E_DESCEND_CHUNK_FAIL DMUS_E_DESCEND_CHUNK_FAIL is returned when the end of the file was reached before the desired chunk was found. |
| DMUS_E_NOT_LOADED An attempt to use this object failed because it first needs to be loaded. |
| DMUS_E_SCRIPT_LANGUAGE_INCOMPATIBLE The activeX scripting engine for the script's language is not compatible with DirectMusic. |
| DMUS_E_SCRIPT_UNSUPPORTED_VARTYPE A variant was used that had a type that is not supported by DirectMusic. |
| DMUS_E_SCRIPT_ERROR_IN_SCRIPT An error was encountered while parsing or executing the script. The pErrorInfo parameter (if supplied) was filled with information about the error. |
| DMUS_E_SCRIPT_CANTLOAD_OLEAUT32 Loading of oleaut32.dll failed. VBScript and other activeX scripting languages require use of oleaut32.dll. On platforms where oleaut32.dll is not present, only the DirectMusicScript language, which doesn't require oleaut32.dll can be used. |
| DMUS_E_SCRIPT_LOADSCRIPT_ERROR An error occurred while parsing a script loaded using LoadScript. The script that was loaded contains an error. |
| DMUS_E_SCRIPT_INVALID_FILE The script file is invalid. |
| DMUS_E_INVALID_SCRIPTTRACK The file contains an invalid script track. |
| DMUS_E_SCRIPT_VARIABLE_NOT_FOUND The script does not contain a variable with the specified name. |
| DMUS_E_SCRIPT_ROUTINE_NOT_FOUND The script does not contain a routine with the specified name. |
| DMUS_E_SCRIPT_CONTENT_READONLY Scripts variables for content referenced or embedded in a script cannot be set. |
| DMUS_E_SCRIPT_NOT_A_REFERENCE Attempt was made to set a script's variable by reference to a value that was not an object type. |
| DMUS_E_SCRIPT_VALUE_NOT_SUPPORTED Attempt was made to set a script's variable by value to an object that does not support a default value property. |
| DMUS_E_INVALID_SEGMENTTRIGGERTRACK The file contains an invalid segment trigger track. |
| DMUS_E_INVALID_LYRICSTRACK The file contains an invalid lyrics track. |
| DMUS_E_INVALID_PARAMCONTROLTRACK The file contains an invalid parameter control track. |
| DMUS_E_AUDIOVBSCRIPT_SYNTAXERROR A script written in AudioVBScript could not be read because it contained a statement that is not allowed by the AudioVBScript language. |
| DMUS_E_AUDIOVBSCRIPT_RUNTIMEERROR A script routine written in AudioVBScript failed because an invalid operation occurred. For example, adding the number 3 to a segment object would produce this error. So would attempting to call a routine that doesn't exist. |
| DMUS_E_AUDIOVBSCRIPT_OPERATIONFAILURE A script routine written in AudioVBScript failed because a function outside of a script failed to complete. For example, a call to PlaySegment that fails to play because of low memory would return this error. |
| DMUS_E_AUDIOPATHS_NOT_VALID The Performance has set up some PChannels using the AssignPChannel command, which makes it not capable of supporting audio paths. |
| DMUS_E_AUDIOPATHS_IN_USE This is the inverse of the previous error. The Performance has set up some audio paths, which makes is incompatible with the calls to allocate pchannels, etc. |
| DMUS_E_NO_AUDIOPATH_CONFIG A segment or song was asked for its embedded audio path configuration, but there isn't any. |
| DMUS_E_AUDIOPATH_INACTIVE An audiopath is inactive, perhaps because closedown was called. |
| DMUS_E_AUDIOPATH_NOBUFFER An audiopath failed to create because a requested buffer could not be created. |
| DMUS_E_AUDIOPATH_NOPORT An audiopath could not be used for playback because it lacked port assignments. |
| DMUS_E_NO_AUDIOPATH Attempt was made to play segment in audiopath mode and there was no audiopath. |
| DMUS_E_INVALIDCHUNK Invalid data was found in a RIFF file chunk. |
| DMUS_E_AUDIOPATH_NOGLOBALFXBUFFER Attempt was made to create an audiopath that sends to a global effects buffer which did not exist. |
| DMUS_E_INVALID_CONTAINER_OBJECT The file does not contain a valid container object. |
