| /* | |
| * Copyright 2002 Lionel Ulmer | |
| * Copyright 2002-2005 Jason Edmeades | |
| * Copyright 2003-2004 Raphael Junqueira | |
| * Copyright 2004 Christian Costa | |
| * Copyright 2005 Oliver Stieber | |
| * Copyright 2006-2008 Stefan Dösinger for CodeWeavers | |
| * Copyright 2006-2008 Henri Verbeet | |
| * Copyright 2007 Andrew Riedi | |
| * Copyright 2009-2011 Henri Verbeet for CodeWeavers | |
| * | |
| * This library is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU Lesser General Public | |
| * License as published by the Free Software Foundation; either | |
| * version 2.1 of the License, or (at your option) any later version. | |
| * | |
| * This library is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * Lesser General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU Lesser General Public | |
| * License along with this library; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA | |
| */ | |
| #include "config.h" | |
| #include "wine/port.h" | |
| #include <stdio.h> | |
| #ifdef HAVE_FLOAT_H | |
| # include <float.h> | |
| #endif | |
| #include "wined3d_private.h" | |
| WINE_DEFAULT_DEBUG_CHANNEL(d3d); | |
| WINE_DECLARE_DEBUG_CHANNEL(winediag); | |
| /* Define the default light parameters as specified by MSDN. */ | |
| const struct wined3d_light WINED3D_default_light = | |
| { | |
| WINED3D_LIGHT_DIRECTIONAL, /* Type */ | |
| { 1.0f, 1.0f, 1.0f, 0.0f }, /* Diffuse r,g,b,a */ | |
| { 0.0f, 0.0f, 0.0f, 0.0f }, /* Specular r,g,b,a */ | |
| { 0.0f, 0.0f, 0.0f, 0.0f }, /* Ambient r,g,b,a, */ | |
| { 0.0f, 0.0f, 0.0f }, /* Position x,y,z */ | |
| { 0.0f, 0.0f, 1.0f }, /* Direction x,y,z */ | |
| 0.0f, /* Range */ | |
| 0.0f, /* Falloff */ | |
| 0.0f, 0.0f, 0.0f, /* Attenuation 0,1,2 */ | |
| 0.0f, /* Theta */ | |
| 0.0f /* Phi */ | |
| }; | |
| /* Note that except for WINED3DPT_POINTLIST and WINED3DPT_LINELIST these | |
| * actually have the same values in GL and D3D. */ | |
| GLenum gl_primitive_type_from_d3d(enum wined3d_primitive_type primitive_type) | |
| { | |
| switch (primitive_type) | |
| { | |
| case WINED3D_PT_POINTLIST: | |
| return GL_POINTS; | |
| case WINED3D_PT_LINELIST: | |
| return GL_LINES; | |
| case WINED3D_PT_LINESTRIP: | |
| return GL_LINE_STRIP; | |
| case WINED3D_PT_TRIANGLELIST: | |
| return GL_TRIANGLES; | |
| case WINED3D_PT_TRIANGLESTRIP: | |
| return GL_TRIANGLE_STRIP; | |
| case WINED3D_PT_TRIANGLEFAN: | |
| return GL_TRIANGLE_FAN; | |
| case WINED3D_PT_LINELIST_ADJ: | |
| return GL_LINES_ADJACENCY_ARB; | |
| case WINED3D_PT_LINESTRIP_ADJ: | |
| return GL_LINE_STRIP_ADJACENCY_ARB; | |
| case WINED3D_PT_TRIANGLELIST_ADJ: | |
| return GL_TRIANGLES_ADJACENCY_ARB; | |
| case WINED3D_PT_TRIANGLESTRIP_ADJ: | |
| return GL_TRIANGLE_STRIP_ADJACENCY_ARB; | |
| case WINED3D_PT_PATCH: | |
| return GL_PATCHES; | |
| default: | |
| FIXME("Unhandled primitive type %s.\n", debug_d3dprimitivetype(primitive_type)); | |
| case WINED3D_PT_UNDEFINED: | |
| return ~0u; | |
| } | |
| } | |
| static enum wined3d_primitive_type d3d_primitive_type_from_gl(GLenum primitive_type) | |
| { | |
| switch (primitive_type) | |
| { | |
| case GL_POINTS: | |
| return WINED3D_PT_POINTLIST; | |
| case GL_LINES: | |
| return WINED3D_PT_LINELIST; | |
| case GL_LINE_STRIP: | |
| return WINED3D_PT_LINESTRIP; | |
| case GL_TRIANGLES: | |
| return WINED3D_PT_TRIANGLELIST; | |
| case GL_TRIANGLE_STRIP: | |
| return WINED3D_PT_TRIANGLESTRIP; | |
| case GL_TRIANGLE_FAN: | |
| return WINED3D_PT_TRIANGLEFAN; | |
| case GL_LINES_ADJACENCY_ARB: | |
| return WINED3D_PT_LINELIST_ADJ; | |
| case GL_LINE_STRIP_ADJACENCY_ARB: | |
| return WINED3D_PT_LINESTRIP_ADJ; | |
| case GL_TRIANGLES_ADJACENCY_ARB: | |
| return WINED3D_PT_TRIANGLELIST_ADJ; | |
| case GL_TRIANGLE_STRIP_ADJACENCY_ARB: | |
| return WINED3D_PT_TRIANGLESTRIP_ADJ; | |
| case GL_PATCHES: | |
| return WINED3D_PT_PATCH; | |
| default: | |
| FIXME("Unhandled primitive type %s.\n", debug_d3dprimitivetype(primitive_type)); | |
| case ~0u: | |
| return WINED3D_PT_UNDEFINED; | |
| } | |
| } | |
| BOOL device_context_add(struct wined3d_device *device, struct wined3d_context *context) | |
| { | |
| struct wined3d_context **new_array; | |
| TRACE("Adding context %p.\n", context); | |
| if (!device->contexts) new_array = HeapAlloc(GetProcessHeap(), 0, sizeof(*new_array)); | |
| else new_array = HeapReAlloc(GetProcessHeap(), 0, device->contexts, | |
| sizeof(*new_array) * (device->context_count + 1)); | |
| if (!new_array) | |
| { | |
| ERR("Failed to grow the context array.\n"); | |
| return FALSE; | |
| } | |
| new_array[device->context_count++] = context; | |
| device->contexts = new_array; | |
| return TRUE; | |
| } | |
| void device_context_remove(struct wined3d_device *device, struct wined3d_context *context) | |
| { | |
| struct wined3d_context **new_array; | |
| BOOL found = FALSE; | |
| UINT i; | |
| TRACE("Removing context %p.\n", context); | |
| for (i = 0; i < device->context_count; ++i) | |
| { | |
| if (device->contexts[i] == context) | |
| { | |
| found = TRUE; | |
| break; | |
| } | |
| } | |
| if (!found) | |
| { | |
| ERR("Context %p doesn't exist in context array.\n", context); | |
| return; | |
| } | |
| if (!--device->context_count) | |
| { | |
| HeapFree(GetProcessHeap(), 0, device->contexts); | |
| device->contexts = NULL; | |
| return; | |
| } | |
| memmove(&device->contexts[i], &device->contexts[i + 1], (device->context_count - i) * sizeof(*device->contexts)); | |
| new_array = HeapReAlloc(GetProcessHeap(), 0, device->contexts, device->context_count * sizeof(*device->contexts)); | |
| if (!new_array) | |
| { | |
| ERR("Failed to shrink context array. Oh well.\n"); | |
| return; | |
| } | |
| device->contexts = new_array; | |
| } | |
| static BOOL is_full_clear(const struct wined3d_surface *target, const RECT *draw_rect, const RECT *clear_rect) | |
| { | |
| unsigned int height = wined3d_texture_get_level_height(target->container, target->texture_level); | |
| unsigned int width = wined3d_texture_get_level_width(target->container, target->texture_level); | |
| /* partial draw rect */ | |
| if (draw_rect->left || draw_rect->top || draw_rect->right < width || draw_rect->bottom < height) | |
| return FALSE; | |
| /* partial clear rect */ | |
| if (clear_rect && (clear_rect->left > 0 || clear_rect->top > 0 | |
| || clear_rect->right < width || clear_rect->bottom < height)) | |
| return FALSE; | |
| return TRUE; | |
| } | |
| void device_clear_render_targets(struct wined3d_device *device, UINT rt_count, const struct wined3d_fb_state *fb, | |
| UINT rect_count, const RECT *clear_rect, const RECT *draw_rect, DWORD flags, const struct wined3d_color *color, | |
| float depth, DWORD stencil) | |
| { | |
| struct wined3d_rendertarget_view *rtv = rt_count ? fb->render_targets[0] : NULL; | |
| struct wined3d_surface *target = rtv ? wined3d_rendertarget_view_get_surface(rtv) : NULL; | |
| struct wined3d_rendertarget_view *dsv = fb->depth_stencil; | |
| struct wined3d_surface *depth_stencil = dsv ? wined3d_rendertarget_view_get_surface(dsv) : NULL; | |
| const struct wined3d_state *state = &device->cs->state; | |
| const struct wined3d_gl_info *gl_info; | |
| UINT drawable_width, drawable_height; | |
| struct wined3d_color corrected_color; | |
| struct wined3d_context *context; | |
| GLbitfield clear_mask = 0; | |
| BOOL render_offscreen; | |
| unsigned int i; | |
| if (target) | |
| context = context_acquire(device, target->container, rtv->sub_resource_idx); | |
| else | |
| context = context_acquire(device, NULL, 0); | |
| if (!context->valid) | |
| { | |
| context_release(context); | |
| WARN("Invalid context, skipping clear.\n"); | |
| return; | |
| } | |
| gl_info = context->gl_info; | |
| /* When we're clearing parts of the drawable, make sure that the target surface is well up to date in the | |
| * drawable. After the clear we'll mark the drawable up to date, so we have to make sure that this is true | |
| * for the cleared parts, and the untouched parts. | |
| * | |
| * If we're clearing the whole target there is no need to copy it into the drawable, it will be overwritten | |
| * anyway. If we're not clearing the color buffer we don't have to copy either since we're not going to set | |
| * the drawable up to date. We have to check all settings that limit the clear area though. Do not bother | |
| * checking all this if the dest surface is in the drawable anyway. */ | |
| for (i = 0; i < rt_count; ++i) | |
| { | |
| struct wined3d_rendertarget_view *rtv = fb->render_targets[i]; | |
| if (rtv && rtv->format->id != WINED3DFMT_NULL) | |
| { | |
| struct wined3d_texture *rt = wined3d_texture_from_resource(rtv->resource); | |
| if (flags & WINED3DCLEAR_TARGET && !is_full_clear(target, draw_rect, rect_count ? clear_rect : NULL)) | |
| wined3d_texture_load_location(rt, rtv->sub_resource_idx, context, rtv->resource->draw_binding); | |
| else | |
| wined3d_texture_prepare_location(rt, rtv->sub_resource_idx, context, rtv->resource->draw_binding); | |
| } | |
| } | |
| if (target) | |
| { | |
| render_offscreen = context->render_offscreen; | |
| wined3d_rendertarget_view_get_drawable_size(rtv, context, &drawable_width, &drawable_height); | |
| } | |
| else | |
| { | |
| render_offscreen = TRUE; | |
| drawable_width = wined3d_texture_get_level_pow2_width(depth_stencil->container, | |
| depth_stencil->texture_level); | |
| drawable_height = wined3d_texture_get_level_pow2_height(depth_stencil->container, | |
| depth_stencil->texture_level); | |
| } | |
| if (depth_stencil && render_offscreen) | |
| wined3d_texture_prepare_location(depth_stencil->container, | |
| dsv->sub_resource_idx, context, dsv->resource->draw_binding); | |
| if (flags & WINED3DCLEAR_ZBUFFER) | |
| { | |
| DWORD location = render_offscreen ? dsv->resource->draw_binding : WINED3D_LOCATION_DRAWABLE; | |
| wined3d_texture_load_location(depth_stencil->container, | |
| dsv->sub_resource_idx, context, location); | |
| } | |
| if (!context_apply_clear_state(context, state, rt_count, fb)) | |
| { | |
| context_release(context); | |
| WARN("Failed to apply clear state, skipping clear.\n"); | |
| return; | |
| } | |
| /* Only set the values up once, as they are not changing. */ | |
| if (flags & WINED3DCLEAR_STENCIL) | |
| { | |
| if (gl_info->supported[EXT_STENCIL_TWO_SIDE]) | |
| { | |
| gl_info->gl_ops.gl.p_glDisable(GL_STENCIL_TEST_TWO_SIDE_EXT); | |
| context_invalidate_state(context, STATE_RENDER(WINED3D_RS_TWOSIDEDSTENCILMODE)); | |
| } | |
| gl_info->gl_ops.gl.p_glStencilMask(~0U); | |
| context_invalidate_state(context, STATE_RENDER(WINED3D_RS_STENCILWRITEMASK)); | |
| gl_info->gl_ops.gl.p_glClearStencil(stencil); | |
| checkGLcall("glClearStencil"); | |
| clear_mask = clear_mask | GL_STENCIL_BUFFER_BIT; | |
| } | |
| if (flags & WINED3DCLEAR_ZBUFFER) | |
| { | |
| DWORD location = render_offscreen ? dsv->resource->draw_binding : WINED3D_LOCATION_DRAWABLE; | |
| wined3d_texture_validate_location(depth_stencil->container, dsv->sub_resource_idx, location); | |
| wined3d_texture_invalidate_location(depth_stencil->container, dsv->sub_resource_idx, ~location); | |
| gl_info->gl_ops.gl.p_glDepthMask(GL_TRUE); | |
| context_invalidate_state(context, STATE_RENDER(WINED3D_RS_ZWRITEENABLE)); | |
| gl_info->gl_ops.gl.p_glClearDepth(depth); | |
| checkGLcall("glClearDepth"); | |
| clear_mask = clear_mask | GL_DEPTH_BUFFER_BIT; | |
| } | |
| if (flags & WINED3DCLEAR_TARGET) | |
| { | |
| for (i = 0; i < rt_count; ++i) | |
| { | |
| struct wined3d_rendertarget_view *rtv = fb->render_targets[i]; | |
| struct wined3d_texture *texture; | |
| if (!rtv) | |
| continue; | |
| if (rtv->resource->type == WINED3D_RTYPE_BUFFER) | |
| { | |
| FIXME("Not supported on buffer resources.\n"); | |
| continue; | |
| } | |
| texture = texture_from_resource(rtv->resource); | |
| wined3d_texture_validate_location(texture, rtv->sub_resource_idx, rtv->resource->draw_binding); | |
| wined3d_texture_invalidate_location(texture, rtv->sub_resource_idx, ~rtv->resource->draw_binding); | |
| } | |
| if (!gl_info->supported[ARB_FRAMEBUFFER_SRGB] && needs_srgb_write(context, state, fb)) | |
| { | |
| if (rt_count > 1) | |
| WARN("Clearing multiple sRGB render targets with no GL_ARB_framebuffer_sRGB " | |
| "support, this might cause graphical issues.\n"); | |
| corrected_color.r = color->r < wined3d_srgb_const1[0] | |
| ? color->r * wined3d_srgb_const0[3] | |
| : pow(color->r, wined3d_srgb_const0[0]) * wined3d_srgb_const0[1] | |
| - wined3d_srgb_const0[2]; | |
| corrected_color.r = min(max(corrected_color.r, 0.0f), 1.0f); | |
| corrected_color.g = color->g < wined3d_srgb_const1[0] | |
| ? color->g * wined3d_srgb_const0[3] | |
| : pow(color->g, wined3d_srgb_const0[0]) * wined3d_srgb_const0[1] | |
| - wined3d_srgb_const0[2]; | |
| corrected_color.g = min(max(corrected_color.g, 0.0f), 1.0f); | |
| corrected_color.b = color->b < wined3d_srgb_const1[0] | |
| ? color->b * wined3d_srgb_const0[3] | |
| : pow(color->b, wined3d_srgb_const0[0]) * wined3d_srgb_const0[1] | |
| - wined3d_srgb_const0[2]; | |
| corrected_color.b = min(max(corrected_color.b, 0.0f), 1.0f); | |
| color = &corrected_color; | |
| } | |
| gl_info->gl_ops.gl.p_glColorMask(GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE); | |
| context_invalidate_state(context, STATE_RENDER(WINED3D_RS_COLORWRITEENABLE)); | |
| context_invalidate_state(context, STATE_RENDER(WINED3D_RS_COLORWRITEENABLE1)); | |
| context_invalidate_state(context, STATE_RENDER(WINED3D_RS_COLORWRITEENABLE2)); | |
| context_invalidate_state(context, STATE_RENDER(WINED3D_RS_COLORWRITEENABLE3)); | |
| gl_info->gl_ops.gl.p_glClearColor(color->r, color->g, color->b, color->a); | |
| checkGLcall("glClearColor"); | |
| clear_mask = clear_mask | GL_COLOR_BUFFER_BIT; | |
| } | |
| if (!rect_count) | |
| { | |
| if (render_offscreen) | |
| { | |
| gl_info->gl_ops.gl.p_glScissor(draw_rect->left, draw_rect->top, | |
| draw_rect->right - draw_rect->left, draw_rect->bottom - draw_rect->top); | |
| } | |
| else | |
| { | |
| gl_info->gl_ops.gl.p_glScissor(draw_rect->left, drawable_height - draw_rect->bottom, | |
| draw_rect->right - draw_rect->left, draw_rect->bottom - draw_rect->top); | |
| } | |
| checkGLcall("glScissor"); | |
| gl_info->gl_ops.gl.p_glClear(clear_mask); | |
| checkGLcall("glClear"); | |
| } | |
| else | |
| { | |
| RECT current_rect; | |
| /* Now process each rect in turn. */ | |
| for (i = 0; i < rect_count; ++i) | |
| { | |
| /* Note that GL uses lower left, width/height. */ | |
| IntersectRect(¤t_rect, draw_rect, &clear_rect[i]); | |
| TRACE("clear_rect[%u] %s, current_rect %s.\n", i, | |
| wine_dbgstr_rect(&clear_rect[i]), | |
| wine_dbgstr_rect(¤t_rect)); | |
| /* Tests show that rectangles where x1 > x2 or y1 > y2 are ignored silently. | |
| * The rectangle is not cleared, no error is returned, but further rectangles are | |
| * still cleared if they are valid. */ | |
| if (current_rect.left > current_rect.right || current_rect.top > current_rect.bottom) | |
| { | |
| TRACE("Rectangle with negative dimensions, ignoring.\n"); | |
| continue; | |
| } | |
| if (render_offscreen) | |
| { | |
| gl_info->gl_ops.gl.p_glScissor(current_rect.left, current_rect.top, | |
| current_rect.right - current_rect.left, current_rect.bottom - current_rect.top); | |
| } | |
| else | |
| { | |
| gl_info->gl_ops.gl.p_glScissor(current_rect.left, drawable_height - current_rect.bottom, | |
| current_rect.right - current_rect.left, current_rect.bottom - current_rect.top); | |
| } | |
| checkGLcall("glScissor"); | |
| gl_info->gl_ops.gl.p_glClear(clear_mask); | |
| checkGLcall("glClear"); | |
| } | |
| } | |
| if (wined3d_settings.strict_draw_ordering || (flags & WINED3DCLEAR_TARGET | |
| && target->container->swapchain && target->container->swapchain->front_buffer == target->container)) | |
| gl_info->gl_ops.gl.p_glFlush(); /* Flush to ensure ordering across contexts. */ | |
| context_release(context); | |
| } | |
| ULONG CDECL wined3d_device_incref(struct wined3d_device *device) | |
| { | |
| ULONG refcount = InterlockedIncrement(&device->ref); | |
| TRACE("%p increasing refcount to %u.\n", device, refcount); | |
| return refcount; | |
| } | |
| static void device_leftover_sampler(struct wine_rb_entry *entry, void *context) | |
| { | |
| struct wined3d_sampler *sampler = WINE_RB_ENTRY_VALUE(entry, struct wined3d_sampler, entry); | |
| ERR("Leftover sampler %p.\n", sampler); | |
| } | |
| ULONG CDECL wined3d_device_decref(struct wined3d_device *device) | |
| { | |
| ULONG refcount = InterlockedDecrement(&device->ref); | |
| TRACE("%p decreasing refcount to %u.\n", device, refcount); | |
| if (!refcount) | |
| { | |
| UINT i; | |
| wined3d_cs_destroy(device->cs); | |
| if (device->recording && wined3d_stateblock_decref(device->recording)) | |
| ERR("Something's still holding the recording stateblock.\n"); | |
| device->recording = NULL; | |
| state_cleanup(&device->state); | |
| for (i = 0; i < sizeof(device->multistate_funcs) / sizeof(device->multistate_funcs[0]); ++i) | |
| { | |
| HeapFree(GetProcessHeap(), 0, device->multistate_funcs[i]); | |
| device->multistate_funcs[i] = NULL; | |
| } | |
| if (!list_empty(&device->resources)) | |
| { | |
| struct wined3d_resource *resource; | |
| ERR("Device released with resources still bound.\n"); | |
| LIST_FOR_EACH_ENTRY(resource, &device->resources, struct wined3d_resource, resource_list_entry) | |
| { | |
| ERR("Leftover resource %p with type %s (%#x).\n", | |
| resource, debug_d3dresourcetype(resource->type), resource->type); | |
| } | |
| } | |
| if (device->contexts) | |
| ERR("Context array not freed!\n"); | |
| if (device->hardwareCursor) | |
| DestroyCursor(device->hardwareCursor); | |
| device->hardwareCursor = 0; | |
| wine_rb_destroy(&device->samplers, device_leftover_sampler, NULL); | |
| wined3d_decref(device->wined3d); | |
| device->wined3d = NULL; | |
| HeapFree(GetProcessHeap(), 0, device); | |
| TRACE("Freed device %p.\n", device); | |
| } | |
| return refcount; | |
| } | |
| UINT CDECL wined3d_device_get_swapchain_count(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->swapchain_count; | |
| } | |
| struct wined3d_swapchain * CDECL wined3d_device_get_swapchain(const struct wined3d_device *device, UINT swapchain_idx) | |
| { | |
| TRACE("device %p, swapchain_idx %u.\n", device, swapchain_idx); | |
| if (swapchain_idx >= device->swapchain_count) | |
| { | |
| WARN("swapchain_idx %u >= swapchain_count %u.\n", | |
| swapchain_idx, device->swapchain_count); | |
| return NULL; | |
| } | |
| return device->swapchains[swapchain_idx]; | |
| } | |
| static void device_load_logo(struct wined3d_device *device, const char *filename) | |
| { | |
| struct wined3d_color_key color_key; | |
| struct wined3d_resource_desc desc; | |
| HBITMAP hbm; | |
| BITMAP bm; | |
| HRESULT hr; | |
| HDC dcb = NULL, dcs = NULL; | |
| if (!(hbm = LoadImageA(NULL, filename, IMAGE_BITMAP, 0, 0, LR_LOADFROMFILE | LR_CREATEDIBSECTION))) | |
| { | |
| ERR_(winediag)("Failed to load logo %s.\n", wine_dbgstr_a(filename)); | |
| return; | |
| } | |
| GetObjectA(hbm, sizeof(BITMAP), &bm); | |
| if (!(dcb = CreateCompatibleDC(NULL))) | |
| goto out; | |
| SelectObject(dcb, hbm); | |
| desc.resource_type = WINED3D_RTYPE_TEXTURE_2D; | |
| desc.format = WINED3DFMT_B5G6R5_UNORM; | |
| desc.multisample_type = WINED3D_MULTISAMPLE_NONE; | |
| desc.multisample_quality = 0; | |
| desc.usage = WINED3DUSAGE_DYNAMIC; | |
| desc.pool = WINED3D_POOL_DEFAULT; | |
| desc.width = bm.bmWidth; | |
| desc.height = bm.bmHeight; | |
| desc.depth = 1; | |
| desc.size = 0; | |
| if (FAILED(hr = wined3d_texture_create(device, &desc, 1, 1, | |
| WINED3D_TEXTURE_CREATE_MAPPABLE | WINED3D_TEXTURE_CREATE_GET_DC, | |
| NULL, NULL, &wined3d_null_parent_ops, &device->logo_texture))) | |
| { | |
| ERR("Wine logo requested, but failed to create texture, hr %#x.\n", hr); | |
| goto out; | |
| } | |
| if (FAILED(hr = wined3d_texture_get_dc(device->logo_texture, 0, &dcs))) | |
| { | |
| wined3d_texture_decref(device->logo_texture); | |
| device->logo_texture = NULL; | |
| goto out; | |
| } | |
| BitBlt(dcs, 0, 0, bm.bmWidth, bm.bmHeight, dcb, 0, 0, SRCCOPY); | |
| wined3d_texture_release_dc(device->logo_texture, 0, dcs); | |
| color_key.color_space_low_value = 0; | |
| color_key.color_space_high_value = 0; | |
| wined3d_texture_set_color_key(device->logo_texture, WINED3D_CKEY_SRC_BLT, &color_key); | |
| out: | |
| if (dcb) DeleteDC(dcb); | |
| if (hbm) DeleteObject(hbm); | |
| } | |
| /* Context activation is done by the caller. */ | |
| static void create_dummy_textures(struct wined3d_device *device, struct wined3d_context *context) | |
| { | |
| const struct wined3d_d3d_info *d3d_info = &device->adapter->d3d_info; | |
| const struct wined3d_gl_info *gl_info = &device->adapter->gl_info; | |
| unsigned int i; | |
| DWORD color; | |
| if (d3d_info->wined3d_creation_flags & WINED3D_LEGACY_UNBOUND_RESOURCE_COLOR) | |
| color = 0x000000ff; | |
| else | |
| color = 0x00000000; | |
| /* Under DirectX you can sample even if no texture is bound, whereas | |
| * OpenGL will only allow that when a valid texture is bound. | |
| * We emulate this by creating dummy textures and binding them | |
| * to each texture stage when the currently set D3D texture is NULL. */ | |
| context_active_texture(context, gl_info, 0); | |
| gl_info->gl_ops.gl.p_glGenTextures(1, &device->dummy_textures.tex_2d); | |
| checkGLcall("glGenTextures"); | |
| TRACE("Dummy 2D texture given name %u.\n", device->dummy_textures.tex_2d); | |
| gl_info->gl_ops.gl.p_glBindTexture(GL_TEXTURE_2D, device->dummy_textures.tex_2d); | |
| checkGLcall("glBindTexture"); | |
| gl_info->gl_ops.gl.p_glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA8, 1, 1, 0, | |
| GL_RGBA, GL_UNSIGNED_INT_8_8_8_8, &color); | |
| checkGLcall("glTexImage2D"); | |
| if (gl_info->supported[ARB_TEXTURE_RECTANGLE]) | |
| { | |
| gl_info->gl_ops.gl.p_glGenTextures(1, &device->dummy_textures.tex_rect); | |
| checkGLcall("glGenTextures"); | |
| TRACE("Dummy rectangle texture given name %u.\n", device->dummy_textures.tex_rect); | |
| gl_info->gl_ops.gl.p_glBindTexture(GL_TEXTURE_RECTANGLE_ARB, device->dummy_textures.tex_rect); | |
| checkGLcall("glBindTexture"); | |
| gl_info->gl_ops.gl.p_glTexImage2D(GL_TEXTURE_RECTANGLE_ARB, 0, GL_RGBA8, 1, 1, 0, | |
| GL_RGBA, GL_UNSIGNED_INT_8_8_8_8, &color); | |
| checkGLcall("glTexImage2D"); | |
| } | |
| if (gl_info->supported[EXT_TEXTURE3D]) | |
| { | |
| gl_info->gl_ops.gl.p_glGenTextures(1, &device->dummy_textures.tex_3d); | |
| checkGLcall("glGenTextures"); | |
| TRACE("Dummy 3D texture given name %u.\n", device->dummy_textures.tex_3d); | |
| gl_info->gl_ops.gl.p_glBindTexture(GL_TEXTURE_3D, device->dummy_textures.tex_3d); | |
| checkGLcall("glBindTexture"); | |
| GL_EXTCALL(glTexImage3D(GL_TEXTURE_3D, 0, GL_RGBA8, 1, 1, 1, 0, | |
| GL_RGBA, GL_UNSIGNED_INT_8_8_8_8, &color)); | |
| checkGLcall("glTexImage3D"); | |
| } | |
| if (gl_info->supported[ARB_TEXTURE_CUBE_MAP]) | |
| { | |
| gl_info->gl_ops.gl.p_glGenTextures(1, &device->dummy_textures.tex_cube); | |
| checkGLcall("glGenTextures"); | |
| TRACE("Dummy cube texture given name %u.\n", device->dummy_textures.tex_cube); | |
| gl_info->gl_ops.gl.p_glBindTexture(GL_TEXTURE_CUBE_MAP, device->dummy_textures.tex_cube); | |
| checkGLcall("glBindTexture"); | |
| for (i = GL_TEXTURE_CUBE_MAP_POSITIVE_X; i <= GL_TEXTURE_CUBE_MAP_NEGATIVE_Z; ++i) | |
| { | |
| gl_info->gl_ops.gl.p_glTexImage2D(i, 0, GL_RGBA8, 1, 1, 0, | |
| GL_RGBA, GL_UNSIGNED_INT_8_8_8_8, &color); | |
| checkGLcall("glTexImage2D"); | |
| } | |
| } | |
| if (gl_info->supported[ARB_TEXTURE_CUBE_MAP_ARRAY]) | |
| { | |
| DWORD cube_array_data[6]; | |
| gl_info->gl_ops.gl.p_glGenTextures(1, &device->dummy_textures.tex_cube_array); | |
| checkGLcall("glGenTextures"); | |
| TRACE("Dummy cube array texture given name %u.\n", device->dummy_textures.tex_cube_array); | |
| gl_info->gl_ops.gl.p_glBindTexture(GL_TEXTURE_CUBE_MAP_ARRAY, device->dummy_textures.tex_cube_array); | |
| checkGLcall("glBindTexture"); | |
| for (i = 0; i < ARRAY_SIZE(cube_array_data); ++i) | |
| cube_array_data[i] = color; | |
| GL_EXTCALL(glTexImage3D(GL_TEXTURE_CUBE_MAP_ARRAY, 0, GL_RGBA8, 1, 1, 6, 0, | |
| GL_RGBA, GL_UNSIGNED_INT_8_8_8_8, cube_array_data)); | |
| checkGLcall("glTexImage3D"); | |
| } | |
| if (gl_info->supported[EXT_TEXTURE_ARRAY]) | |
| { | |
| gl_info->gl_ops.gl.p_glGenTextures(1, &device->dummy_textures.tex_2d_array); | |
| checkGLcall("glGenTextures"); | |
| TRACE("Dummy 2D array texture given name %u.\n", device->dummy_textures.tex_2d_array); | |
| gl_info->gl_ops.gl.p_glBindTexture(GL_TEXTURE_2D_ARRAY, device->dummy_textures.tex_2d_array); | |
| checkGLcall("glBindTexture"); | |
| GL_EXTCALL(glTexImage3D(GL_TEXTURE_2D_ARRAY, 0, GL_RGBA8, 1, 1, 1, 0, | |
| GL_RGBA, GL_UNSIGNED_INT_8_8_8_8, &color)); | |
| checkGLcall("glTexImage3D"); | |
| } | |
| if (gl_info->supported[ARB_TEXTURE_BUFFER_OBJECT]) | |
| { | |
| GLuint buffer; | |
| GL_EXTCALL(glGenBuffers(1, &buffer)); | |
| GL_EXTCALL(glBindBuffer(GL_TEXTURE_BUFFER, buffer)); | |
| GL_EXTCALL(glBufferData(GL_TEXTURE_BUFFER, sizeof(color), &color, GL_STATIC_DRAW)); | |
| GL_EXTCALL(glBindBuffer(GL_TEXTURE_BUFFER, 0)); | |
| checkGLcall("Create buffer object"); | |
| gl_info->gl_ops.gl.p_glGenTextures(1, &device->dummy_textures.tex_buffer); | |
| checkGLcall("glGenTextures"); | |
| TRACE("Dummy buffer texture given name %u.\n", device->dummy_textures.tex_buffer); | |
| gl_info->gl_ops.gl.p_glBindTexture(GL_TEXTURE_BUFFER, device->dummy_textures.tex_buffer); | |
| checkGLcall("glBindTexture"); | |
| GL_EXTCALL(glTexBuffer(GL_TEXTURE_BUFFER, GL_RGBA8, buffer)); | |
| checkGLcall("glTexBuffer"); | |
| GL_EXTCALL(glDeleteBuffers(1, &buffer)); | |
| checkGLcall("glDeleteBuffers"); | |
| } | |
| context_bind_dummy_textures(device, context); | |
| } | |
| /* Context activation is done by the caller. */ | |
| static void destroy_dummy_textures(struct wined3d_device *device, struct wined3d_context *context) | |
| { | |
| const struct wined3d_gl_info *gl_info = context->gl_info; | |
| if (gl_info->supported[ARB_TEXTURE_BUFFER_OBJECT]) | |
| gl_info->gl_ops.gl.p_glDeleteTextures(1, &device->dummy_textures.tex_buffer); | |
| if (gl_info->supported[EXT_TEXTURE_ARRAY]) | |
| gl_info->gl_ops.gl.p_glDeleteTextures(1, &device->dummy_textures.tex_2d_array); | |
| if (gl_info->supported[ARB_TEXTURE_CUBE_MAP_ARRAY]) | |
| gl_info->gl_ops.gl.p_glDeleteTextures(1, &device->dummy_textures.tex_cube_array); | |
| if (gl_info->supported[ARB_TEXTURE_CUBE_MAP]) | |
| gl_info->gl_ops.gl.p_glDeleteTextures(1, &device->dummy_textures.tex_cube); | |
| if (gl_info->supported[EXT_TEXTURE3D]) | |
| gl_info->gl_ops.gl.p_glDeleteTextures(1, &device->dummy_textures.tex_3d); | |
| if (gl_info->supported[ARB_TEXTURE_RECTANGLE]) | |
| gl_info->gl_ops.gl.p_glDeleteTextures(1, &device->dummy_textures.tex_rect); | |
| gl_info->gl_ops.gl.p_glDeleteTextures(1, &device->dummy_textures.tex_2d); | |
| checkGLcall("Delete dummy textures"); | |
| memset(&device->dummy_textures, 0, sizeof(device->dummy_textures)); | |
| } | |
| /* Context activation is done by the caller. */ | |
| static void create_default_samplers(struct wined3d_device *device, struct wined3d_context *context) | |
| { | |
| struct wined3d_sampler_desc desc; | |
| HRESULT hr; | |
| desc.address_u = WINED3D_TADDRESS_WRAP; | |
| desc.address_v = WINED3D_TADDRESS_WRAP; | |
| desc.address_w = WINED3D_TADDRESS_WRAP; | |
| memset(desc.border_color, 0, sizeof(desc.border_color)); | |
| desc.mag_filter = WINED3D_TEXF_POINT; | |
| desc.min_filter = WINED3D_TEXF_POINT; | |
| desc.mip_filter = WINED3D_TEXF_NONE; | |
| desc.lod_bias = 0.0f; | |
| desc.min_lod = -1000.0f; | |
| desc.max_lod = 1000.0f; | |
| desc.mip_base_level = 0; | |
| desc.max_anisotropy = 1; | |
| desc.compare = FALSE; | |
| desc.comparison_func = WINED3D_CMP_NEVER; | |
| desc.srgb_decode = TRUE; | |
| /* In SM4+ shaders there is a separation between resources and samplers. Some shader | |
| * instructions allow access to resources without using samplers. | |
| * In GLSL, resources are always accessed through sampler or image variables. The default | |
| * sampler object is used to emulate the direct resource access when there is no sampler state | |
| * to use. | |
| */ | |
| if (FAILED(hr = wined3d_sampler_create(device, &desc, NULL, &wined3d_null_parent_ops, &device->default_sampler))) | |
| { | |
| ERR("Failed to create default sampler, hr %#x.\n", hr); | |
| device->default_sampler = NULL; | |
| } | |
| /* In D3D10+, a NULL sampler maps to the default sampler state. */ | |
| desc.address_u = WINED3D_TADDRESS_CLAMP; | |
| desc.address_v = WINED3D_TADDRESS_CLAMP; | |
| desc.address_w = WINED3D_TADDRESS_CLAMP; | |
| desc.mag_filter = WINED3D_TEXF_LINEAR; | |
| desc.min_filter = WINED3D_TEXF_LINEAR; | |
| desc.mip_filter = WINED3D_TEXF_LINEAR; | |
| if (FAILED(hr = wined3d_sampler_create(device, &desc, NULL, &wined3d_null_parent_ops, &device->null_sampler))) | |
| { | |
| ERR("Failed to create null sampler, hr %#x.\n", hr); | |
| device->null_sampler = NULL; | |
| } | |
| } | |
| /* Context activation is done by the caller. */ | |
| static void destroy_default_samplers(struct wined3d_device *device, struct wined3d_context *context) | |
| { | |
| wined3d_sampler_decref(device->default_sampler); | |
| device->default_sampler = NULL; | |
| wined3d_sampler_decref(device->null_sampler); | |
| device->null_sampler = NULL; | |
| } | |
| static LONG fullscreen_style(LONG style) | |
| { | |
| /* Make sure the window is managed, otherwise we won't get keyboard input. */ | |
| style |= WS_POPUP | WS_SYSMENU; | |
| style &= ~(WS_CAPTION | WS_THICKFRAME); | |
| return style; | |
| } | |
| static LONG fullscreen_exstyle(LONG exstyle) | |
| { | |
| /* Filter out window decorations. */ | |
| exstyle &= ~(WS_EX_WINDOWEDGE | WS_EX_CLIENTEDGE); | |
| return exstyle; | |
| } | |
| void CDECL wined3d_device_setup_fullscreen_window(struct wined3d_device *device, HWND window, UINT w, UINT h) | |
| { | |
| BOOL filter_messages; | |
| LONG style, exstyle; | |
| TRACE("Setting up window %p for fullscreen mode.\n", window); | |
| if (device->style || device->exStyle) | |
| { | |
| ERR("Changing the window style for window %p, but another style (%08x, %08x) is already stored.\n", | |
| window, device->style, device->exStyle); | |
| } | |
| device->style = GetWindowLongW(window, GWL_STYLE); | |
| device->exStyle = GetWindowLongW(window, GWL_EXSTYLE); | |
| style = fullscreen_style(device->style); | |
| exstyle = fullscreen_exstyle(device->exStyle); | |
| TRACE("Old style was %08x, %08x, setting to %08x, %08x.\n", | |
| device->style, device->exStyle, style, exstyle); | |
| filter_messages = device->filter_messages; | |
| device->filter_messages = TRUE; | |
| SetWindowLongW(window, GWL_STYLE, style); | |
| SetWindowLongW(window, GWL_EXSTYLE, exstyle); | |
| SetWindowPos(window, HWND_TOPMOST, 0, 0, w, h, SWP_FRAMECHANGED | SWP_SHOWWINDOW | SWP_NOACTIVATE); | |
| device->filter_messages = filter_messages; | |
| } | |
| void CDECL wined3d_device_restore_fullscreen_window(struct wined3d_device *device, HWND window, | |
| const RECT *window_rect) | |
| { | |
| unsigned int window_pos_flags = SWP_FRAMECHANGED | SWP_NOZORDER | SWP_NOACTIVATE; | |
| BOOL filter_messages; | |
| LONG style, exstyle; | |
| RECT rect = {0}; | |
| if (!device->style && !device->exStyle) | |
| return; | |
| style = GetWindowLongW(window, GWL_STYLE); | |
| exstyle = GetWindowLongW(window, GWL_EXSTYLE); | |
| /* These flags are set by wined3d_device_setup_fullscreen_window, not the | |
| * application, and we want to ignore them in the test below, since it's | |
| * not the application's fault that they changed. Additionally, we want to | |
| * preserve the current status of these flags (i.e. don't restore them) to | |
| * more closely emulate the behavior of Direct3D, which leaves these flags | |
| * alone when returning to windowed mode. */ | |
| device->style ^= (device->style ^ style) & WS_VISIBLE; | |
| device->exStyle ^= (device->exStyle ^ exstyle) & WS_EX_TOPMOST; | |
| TRACE("Restoring window style of window %p to %08x, %08x.\n", | |
| window, device->style, device->exStyle); | |
| filter_messages = device->filter_messages; | |
| device->filter_messages = TRUE; | |
| /* Only restore the style if the application didn't modify it during the | |
| * fullscreen phase. Some applications change it before calling Reset() | |
| * when switching between windowed and fullscreen modes (HL2), some | |
| * depend on the original style (Eve Online). */ | |
| if (style == fullscreen_style(device->style) && exstyle == fullscreen_exstyle(device->exStyle)) | |
| { | |
| SetWindowLongW(window, GWL_STYLE, device->style); | |
| SetWindowLongW(window, GWL_EXSTYLE, device->exStyle); | |
| } | |
| if (window_rect) | |
| rect = *window_rect; | |
| else | |
| window_pos_flags |= (SWP_NOMOVE | SWP_NOSIZE); | |
| SetWindowPos(window, 0, rect.left, rect.top, | |
| rect.right - rect.left, rect.bottom - rect.top, window_pos_flags); | |
| device->filter_messages = filter_messages; | |
| /* Delete the old values. */ | |
| device->style = 0; | |
| device->exStyle = 0; | |
| } | |
| HRESULT CDECL wined3d_device_acquire_focus_window(struct wined3d_device *device, HWND window) | |
| { | |
| TRACE("device %p, window %p.\n", device, window); | |
| if (!wined3d_register_window(window, device)) | |
| { | |
| ERR("Failed to register window %p.\n", window); | |
| return E_FAIL; | |
| } | |
| InterlockedExchangePointer((void **)&device->focus_window, window); | |
| SetWindowPos(window, 0, 0, 0, 0, 0, SWP_NOSIZE | SWP_NOMOVE); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_release_focus_window(struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| if (device->focus_window) wined3d_unregister_window(device->focus_window); | |
| InterlockedExchangePointer((void **)&device->focus_window, NULL); | |
| } | |
| static void device_init_swapchain_state(struct wined3d_device *device, struct wined3d_swapchain *swapchain) | |
| { | |
| BOOL ds_enable = !!swapchain->desc.enable_auto_depth_stencil; | |
| unsigned int i; | |
| if (device->fb.render_targets) | |
| { | |
| for (i = 0; i < device->adapter->gl_info.limits.buffers; ++i) | |
| { | |
| wined3d_device_set_rendertarget_view(device, i, NULL, FALSE); | |
| } | |
| if (device->back_buffer_view) | |
| wined3d_device_set_rendertarget_view(device, 0, device->back_buffer_view, TRUE); | |
| } | |
| wined3d_device_set_depth_stencil_view(device, ds_enable ? device->auto_depth_stencil_view : NULL); | |
| wined3d_device_set_render_state(device, WINED3D_RS_ZENABLE, ds_enable); | |
| } | |
| static void wined3d_device_delete_opengl_contexts_cs(void *object) | |
| { | |
| struct wined3d_resource *resource, *cursor; | |
| struct wined3d_device *device = object; | |
| struct wined3d_context *context; | |
| struct wined3d_shader *shader; | |
| LIST_FOR_EACH_ENTRY_SAFE(resource, cursor, &device->resources, struct wined3d_resource, resource_list_entry) | |
| { | |
| TRACE("Unloading resource %p.\n", resource); | |
| wined3d_cs_emit_unload_resource(device->cs, resource); | |
| } | |
| LIST_FOR_EACH_ENTRY(shader, &device->shaders, struct wined3d_shader, shader_list_entry) | |
| { | |
| device->shader_backend->shader_destroy(shader); | |
| } | |
| context = context_acquire(device, NULL, 0); | |
| device->blitter->ops->blitter_destroy(device->blitter, context); | |
| device->shader_backend->shader_free_private(device); | |
| destroy_dummy_textures(device, context); | |
| destroy_default_samplers(device, context); | |
| context_release(context); | |
| while (device->context_count) | |
| { | |
| if (device->contexts[0]->swapchain) | |
| swapchain_destroy_contexts(device->contexts[0]->swapchain); | |
| else | |
| context_destroy(device, device->contexts[0]); | |
| } | |
| } | |
| static void wined3d_device_delete_opengl_contexts(struct wined3d_device *device) | |
| { | |
| wined3d_cs_destroy_object(device->cs, wined3d_device_delete_opengl_contexts_cs, device); | |
| device->cs->ops->finish(device->cs, WINED3D_CS_QUEUE_DEFAULT); | |
| } | |
| static void wined3d_device_create_primary_opengl_context_cs(void *object) | |
| { | |
| struct wined3d_device *device = object; | |
| struct wined3d_swapchain *swapchain; | |
| struct wined3d_context *context; | |
| struct wined3d_texture *target; | |
| HRESULT hr; | |
| if (FAILED(hr = device->shader_backend->shader_alloc_private(device, | |
| device->adapter->vertex_pipe, device->adapter->fragment_pipe))) | |
| { | |
| ERR("Failed to allocate shader private data, hr %#x.\n", hr); | |
| return; | |
| } | |
| if (!(device->blitter = wined3d_cpu_blitter_create())) | |
| { | |
| ERR("Failed to create CPU blitter.\n"); | |
| device->shader_backend->shader_free_private(device); | |
| return; | |
| } | |
| wined3d_ffp_blitter_create(&device->blitter, &device->adapter->gl_info); | |
| wined3d_arbfp_blitter_create(&device->blitter, device); | |
| wined3d_fbo_blitter_create(&device->blitter, &device->adapter->gl_info); | |
| swapchain = device->swapchains[0]; | |
| target = swapchain->back_buffers ? swapchain->back_buffers[0] : swapchain->front_buffer; | |
| context = context_acquire(device, target, 0); | |
| create_dummy_textures(device, context); | |
| create_default_samplers(device, context); | |
| context_release(context); | |
| } | |
| static HRESULT wined3d_device_create_primary_opengl_context(struct wined3d_device *device) | |
| { | |
| wined3d_cs_init_object(device->cs, wined3d_device_create_primary_opengl_context_cs, device); | |
| device->cs->ops->finish(device->cs, WINED3D_CS_QUEUE_DEFAULT); | |
| if (!device->swapchains[0]->num_contexts) | |
| return E_FAIL; | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_init_3d(struct wined3d_device *device, | |
| struct wined3d_swapchain_desc *swapchain_desc) | |
| { | |
| static const struct wined3d_color black = {0.0f, 0.0f, 0.0f, 0.0f}; | |
| const struct wined3d_gl_info *gl_info = &device->adapter->gl_info; | |
| struct wined3d_swapchain *swapchain = NULL; | |
| DWORD clear_flags = 0; | |
| HRESULT hr; | |
| TRACE("device %p, swapchain_desc %p.\n", device, swapchain_desc); | |
| if (device->d3d_initialized) | |
| return WINED3DERR_INVALIDCALL; | |
| if (device->wined3d->flags & WINED3D_NO3D) | |
| return WINED3DERR_INVALIDCALL; | |
| if (!(device->fb.render_targets = wined3d_calloc(gl_info->limits.buffers, sizeof(*device->fb.render_targets)))) | |
| return E_OUTOFMEMORY; | |
| /* Setup the implicit swapchain. This also initializes a context. */ | |
| TRACE("Creating implicit swapchain\n"); | |
| hr = device->device_parent->ops->create_swapchain(device->device_parent, | |
| swapchain_desc, &swapchain); | |
| if (FAILED(hr)) | |
| { | |
| WARN("Failed to create implicit swapchain\n"); | |
| goto err_out; | |
| } | |
| if (swapchain_desc->backbuffer_count) | |
| { | |
| struct wined3d_resource *back_buffer = &swapchain->back_buffers[0]->resource; | |
| struct wined3d_view_desc view_desc; | |
| view_desc.format_id = back_buffer->format->id; | |
| view_desc.flags = 0; | |
| view_desc.u.texture.level_idx = 0; | |
| view_desc.u.texture.level_count = 1; | |
| view_desc.u.texture.layer_idx = 0; | |
| view_desc.u.texture.layer_count = 1; | |
| if (FAILED(hr = wined3d_rendertarget_view_create(&view_desc, back_buffer, | |
| NULL, &wined3d_null_parent_ops, &device->back_buffer_view))) | |
| { | |
| ERR("Failed to create rendertarget view, hr %#x.\n", hr); | |
| goto err_out; | |
| } | |
| } | |
| device->swapchain_count = 1; | |
| if (!(device->swapchains = wined3d_calloc(device->swapchain_count, sizeof(*device->swapchains)))) | |
| { | |
| ERR("Out of memory!\n"); | |
| goto err_out; | |
| } | |
| device->swapchains[0] = swapchain; | |
| if (FAILED(hr = wined3d_device_create_primary_opengl_context(device))) | |
| goto err_out; | |
| device_init_swapchain_state(device, swapchain); | |
| device->contexts[0]->last_was_rhw = 0; | |
| TRACE("All defaults now set up, leaving 3D init.\n"); | |
| /* Clear the screen */ | |
| if (swapchain->back_buffers && swapchain->back_buffers[0]) | |
| clear_flags |= WINED3DCLEAR_TARGET; | |
| if (swapchain_desc->enable_auto_depth_stencil) | |
| clear_flags |= WINED3DCLEAR_ZBUFFER | WINED3DCLEAR_STENCIL; | |
| if (clear_flags) | |
| wined3d_device_clear(device, 0, NULL, clear_flags, &black, 1.0f, 0); | |
| device->d3d_initialized = TRUE; | |
| if (wined3d_settings.logo) | |
| device_load_logo(device, wined3d_settings.logo); | |
| return WINED3D_OK; | |
| err_out: | |
| HeapFree(GetProcessHeap(), 0, device->swapchains); | |
| device->swapchain_count = 0; | |
| if (device->back_buffer_view) | |
| wined3d_rendertarget_view_decref(device->back_buffer_view); | |
| if (swapchain) | |
| wined3d_swapchain_decref(swapchain); | |
| HeapFree(GetProcessHeap(), 0, device->fb.render_targets); | |
| return hr; | |
| } | |
| HRESULT CDECL wined3d_device_init_gdi(struct wined3d_device *device, | |
| struct wined3d_swapchain_desc *swapchain_desc) | |
| { | |
| struct wined3d_swapchain *swapchain = NULL; | |
| HRESULT hr; | |
| TRACE("device %p, swapchain_desc %p.\n", device, swapchain_desc); | |
| /* Setup the implicit swapchain */ | |
| TRACE("Creating implicit swapchain\n"); | |
| hr = device->device_parent->ops->create_swapchain(device->device_parent, | |
| swapchain_desc, &swapchain); | |
| if (FAILED(hr)) | |
| { | |
| WARN("Failed to create implicit swapchain\n"); | |
| goto err_out; | |
| } | |
| device->swapchain_count = 1; | |
| if (!(device->swapchains = wined3d_calloc(device->swapchain_count, sizeof(*device->swapchains)))) | |
| { | |
| ERR("Out of memory!\n"); | |
| goto err_out; | |
| } | |
| device->swapchains[0] = swapchain; | |
| if (!(device->blitter = wined3d_cpu_blitter_create())) | |
| { | |
| ERR("Failed to create CPU blitter.\n"); | |
| HeapFree(GetProcessHeap(), 0, device->swapchains); | |
| device->swapchain_count = 0; | |
| goto err_out; | |
| } | |
| return WINED3D_OK; | |
| err_out: | |
| wined3d_swapchain_decref(swapchain); | |
| return hr; | |
| } | |
| static void device_free_sampler(struct wine_rb_entry *entry, void *context) | |
| { | |
| struct wined3d_sampler *sampler = WINE_RB_ENTRY_VALUE(entry, struct wined3d_sampler, entry); | |
| wined3d_sampler_decref(sampler); | |
| } | |
| HRESULT CDECL wined3d_device_uninit_3d(struct wined3d_device *device) | |
| { | |
| UINT i; | |
| TRACE("device %p.\n", device); | |
| if (!device->d3d_initialized) | |
| return WINED3DERR_INVALIDCALL; | |
| device->cs->ops->finish(device->cs, WINED3D_CS_QUEUE_DEFAULT); | |
| if (device->logo_texture) | |
| wined3d_texture_decref(device->logo_texture); | |
| if (device->cursor_texture) | |
| wined3d_texture_decref(device->cursor_texture); | |
| state_unbind_resources(&device->state); | |
| wine_rb_clear(&device->samplers, device_free_sampler, NULL); | |
| wined3d_device_delete_opengl_contexts(device); | |
| if (device->fb.depth_stencil) | |
| { | |
| struct wined3d_rendertarget_view *view = device->fb.depth_stencil; | |
| TRACE("Releasing depth/stencil view %p.\n", view); | |
| device->fb.depth_stencil = NULL; | |
| wined3d_rendertarget_view_decref(view); | |
| } | |
| if (device->auto_depth_stencil_view) | |
| { | |
| struct wined3d_rendertarget_view *view = device->auto_depth_stencil_view; | |
| device->auto_depth_stencil_view = NULL; | |
| if (wined3d_rendertarget_view_decref(view)) | |
| ERR("Something's still holding the auto depth/stencil view (%p).\n", view); | |
| } | |
| for (i = 0; i < device->adapter->gl_info.limits.buffers; ++i) | |
| { | |
| wined3d_device_set_rendertarget_view(device, i, NULL, FALSE); | |
| } | |
| if (device->back_buffer_view) | |
| { | |
| wined3d_rendertarget_view_decref(device->back_buffer_view); | |
| device->back_buffer_view = NULL; | |
| } | |
| for (i = 0; i < device->swapchain_count; ++i) | |
| { | |
| TRACE("Releasing the implicit swapchain %u.\n", i); | |
| if (wined3d_swapchain_decref(device->swapchains[i])) | |
| FIXME("Something's still holding the implicit swapchain.\n"); | |
| } | |
| HeapFree(GetProcessHeap(), 0, device->swapchains); | |
| device->swapchains = NULL; | |
| device->swapchain_count = 0; | |
| HeapFree(GetProcessHeap(), 0, device->fb.render_targets); | |
| device->fb.render_targets = NULL; | |
| device->d3d_initialized = FALSE; | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_uninit_gdi(struct wined3d_device *device) | |
| { | |
| unsigned int i; | |
| device->blitter->ops->blitter_destroy(device->blitter, NULL); | |
| for (i = 0; i < device->swapchain_count; ++i) | |
| { | |
| TRACE("Releasing the implicit swapchain %u.\n", i); | |
| if (wined3d_swapchain_decref(device->swapchains[i])) | |
| FIXME("Something's still holding the implicit swapchain.\n"); | |
| } | |
| HeapFree(GetProcessHeap(), 0, device->swapchains); | |
| device->swapchains = NULL; | |
| device->swapchain_count = 0; | |
| return WINED3D_OK; | |
| } | |
| /* Enables thread safety in the wined3d device and its resources. Called by DirectDraw | |
| * from SetCooperativeLevel if DDSCL_MULTITHREADED is specified, and by d3d8/9 from | |
| * CreateDevice if D3DCREATE_MULTITHREADED is passed. | |
| * | |
| * There is no way to deactivate thread safety once it is enabled. | |
| */ | |
| void CDECL wined3d_device_set_multithreaded(struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| /* For now just store the flag (needed in case of ddraw). */ | |
| device->create_parms.flags |= WINED3DCREATE_MULTITHREADED; | |
| } | |
| UINT CDECL wined3d_device_get_available_texture_mem(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| TRACE("Emulating 0x%s bytes. 0x%s used, returning 0x%s left.\n", | |
| wine_dbgstr_longlong(device->adapter->vram_bytes), | |
| wine_dbgstr_longlong(device->adapter->vram_bytes_used), | |
| wine_dbgstr_longlong(device->adapter->vram_bytes - device->adapter->vram_bytes_used)); | |
| return min(UINT_MAX, device->adapter->vram_bytes - device->adapter->vram_bytes_used); | |
| } | |
| void CDECL wined3d_device_set_stream_output(struct wined3d_device *device, UINT idx, | |
| struct wined3d_buffer *buffer, UINT offset) | |
| { | |
| struct wined3d_stream_output *stream; | |
| struct wined3d_buffer *prev_buffer; | |
| TRACE("device %p, idx %u, buffer %p, offset %u.\n", device, idx, buffer, offset); | |
| if (idx >= WINED3D_MAX_STREAM_OUTPUT_BUFFERS) | |
| { | |
| WARN("Invalid stream output %u.\n", idx); | |
| return; | |
| } | |
| stream = &device->update_state->stream_output[idx]; | |
| prev_buffer = stream->buffer; | |
| if (buffer) | |
| wined3d_buffer_incref(buffer); | |
| stream->buffer = buffer; | |
| stream->offset = offset; | |
| if (!device->recording) | |
| wined3d_cs_emit_set_stream_output(device->cs, idx, buffer, offset); | |
| if (prev_buffer) | |
| wined3d_buffer_decref(prev_buffer); | |
| } | |
| struct wined3d_buffer * CDECL wined3d_device_get_stream_output(struct wined3d_device *device, | |
| UINT idx, UINT *offset) | |
| { | |
| TRACE("device %p, idx %u, offset %p.\n", device, idx, offset); | |
| if (idx >= WINED3D_MAX_STREAM_OUTPUT_BUFFERS) | |
| { | |
| WARN("Invalid stream output %u.\n", idx); | |
| return NULL; | |
| } | |
| if (offset) | |
| *offset = device->state.stream_output[idx].offset; | |
| return device->state.stream_output[idx].buffer; | |
| } | |
| HRESULT CDECL wined3d_device_set_stream_source(struct wined3d_device *device, UINT stream_idx, | |
| struct wined3d_buffer *buffer, UINT offset, UINT stride) | |
| { | |
| struct wined3d_stream_state *stream; | |
| struct wined3d_buffer *prev_buffer; | |
| TRACE("device %p, stream_idx %u, buffer %p, offset %u, stride %u.\n", | |
| device, stream_idx, buffer, offset, stride); | |
| if (stream_idx >= MAX_STREAMS) | |
| { | |
| WARN("Stream index %u out of range.\n", stream_idx); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| else if (offset & 0x3) | |
| { | |
| WARN("Offset %u is not 4 byte aligned.\n", offset); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| stream = &device->update_state->streams[stream_idx]; | |
| prev_buffer = stream->buffer; | |
| if (device->recording) | |
| device->recording->changed.streamSource |= 1u << stream_idx; | |
| if (prev_buffer == buffer | |
| && stream->stride == stride | |
| && stream->offset == offset) | |
| { | |
| TRACE("Application is setting the old values over, nothing to do.\n"); | |
| return WINED3D_OK; | |
| } | |
| stream->buffer = buffer; | |
| if (buffer) | |
| { | |
| stream->stride = stride; | |
| stream->offset = offset; | |
| wined3d_buffer_incref(buffer); | |
| } | |
| if (!device->recording) | |
| wined3d_cs_emit_set_stream_source(device->cs, stream_idx, buffer, offset, stride); | |
| if (prev_buffer) | |
| wined3d_buffer_decref(prev_buffer); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_stream_source(const struct wined3d_device *device, | |
| UINT stream_idx, struct wined3d_buffer **buffer, UINT *offset, UINT *stride) | |
| { | |
| const struct wined3d_stream_state *stream; | |
| TRACE("device %p, stream_idx %u, buffer %p, offset %p, stride %p.\n", | |
| device, stream_idx, buffer, offset, stride); | |
| if (stream_idx >= MAX_STREAMS) | |
| { | |
| WARN("Stream index %u out of range.\n", stream_idx); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| stream = &device->state.streams[stream_idx]; | |
| *buffer = stream->buffer; | |
| if (offset) | |
| *offset = stream->offset; | |
| *stride = stream->stride; | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_set_stream_source_freq(struct wined3d_device *device, UINT stream_idx, UINT divider) | |
| { | |
| struct wined3d_stream_state *stream; | |
| UINT old_flags, old_freq; | |
| TRACE("device %p, stream_idx %u, divider %#x.\n", device, stream_idx, divider); | |
| /* Verify input. At least in d3d9 this is invalid. */ | |
| if ((divider & WINED3DSTREAMSOURCE_INSTANCEDATA) && (divider & WINED3DSTREAMSOURCE_INDEXEDDATA)) | |
| { | |
| WARN("INSTANCEDATA and INDEXEDDATA were set, returning D3DERR_INVALIDCALL.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if ((divider & WINED3DSTREAMSOURCE_INSTANCEDATA) && !stream_idx) | |
| { | |
| WARN("INSTANCEDATA used on stream 0, returning D3DERR_INVALIDCALL.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (!divider) | |
| { | |
| WARN("Divider is 0, returning D3DERR_INVALIDCALL.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| stream = &device->update_state->streams[stream_idx]; | |
| old_flags = stream->flags; | |
| old_freq = stream->frequency; | |
| stream->flags = divider & (WINED3DSTREAMSOURCE_INSTANCEDATA | WINED3DSTREAMSOURCE_INDEXEDDATA); | |
| stream->frequency = divider & 0x7fffff; | |
| if (device->recording) | |
| device->recording->changed.streamFreq |= 1u << stream_idx; | |
| else if (stream->frequency != old_freq || stream->flags != old_flags) | |
| wined3d_cs_emit_set_stream_source_freq(device->cs, stream_idx, stream->frequency, stream->flags); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_stream_source_freq(const struct wined3d_device *device, | |
| UINT stream_idx, UINT *divider) | |
| { | |
| const struct wined3d_stream_state *stream; | |
| TRACE("device %p, stream_idx %u, divider %p.\n", device, stream_idx, divider); | |
| stream = &device->state.streams[stream_idx]; | |
| *divider = stream->flags | stream->frequency; | |
| TRACE("Returning %#x.\n", *divider); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_set_transform(struct wined3d_device *device, | |
| enum wined3d_transform_state d3dts, const struct wined3d_matrix *matrix) | |
| { | |
| TRACE("device %p, state %s, matrix %p.\n", | |
| device, debug_d3dtstype(d3dts), matrix); | |
| TRACE("%.8e %.8e %.8e %.8e\n", matrix->_11, matrix->_12, matrix->_13, matrix->_14); | |
| TRACE("%.8e %.8e %.8e %.8e\n", matrix->_21, matrix->_22, matrix->_23, matrix->_24); | |
| TRACE("%.8e %.8e %.8e %.8e\n", matrix->_31, matrix->_32, matrix->_33, matrix->_34); | |
| TRACE("%.8e %.8e %.8e %.8e\n", matrix->_41, matrix->_42, matrix->_43, matrix->_44); | |
| /* Handle recording of state blocks. */ | |
| if (device->recording) | |
| { | |
| TRACE("Recording... not performing anything.\n"); | |
| device->recording->changed.transform[d3dts >> 5] |= 1u << (d3dts & 0x1f); | |
| device->update_state->transforms[d3dts] = *matrix; | |
| return; | |
| } | |
| /* If the new matrix is the same as the current one, | |
| * we cut off any further processing. this seems to be a reasonable | |
| * optimization because as was noticed, some apps (warcraft3 for example) | |
| * tend towards setting the same matrix repeatedly for some reason. | |
| * | |
| * From here on we assume that the new matrix is different, wherever it matters. */ | |
| if (!memcmp(&device->state.transforms[d3dts], matrix, sizeof(*matrix))) | |
| { | |
| TRACE("The application is setting the same matrix over again.\n"); | |
| return; | |
| } | |
| device->state.transforms[d3dts] = *matrix; | |
| wined3d_cs_emit_set_transform(device->cs, d3dts, matrix); | |
| } | |
| void CDECL wined3d_device_get_transform(const struct wined3d_device *device, | |
| enum wined3d_transform_state state, struct wined3d_matrix *matrix) | |
| { | |
| TRACE("device %p, state %s, matrix %p.\n", device, debug_d3dtstype(state), matrix); | |
| *matrix = device->state.transforms[state]; | |
| } | |
| void CDECL wined3d_device_multiply_transform(struct wined3d_device *device, | |
| enum wined3d_transform_state state, const struct wined3d_matrix *matrix) | |
| { | |
| const struct wined3d_matrix *mat; | |
| struct wined3d_matrix temp; | |
| TRACE("device %p, state %s, matrix %p.\n", device, debug_d3dtstype(state), matrix); | |
| /* Note: Using 'updateStateBlock' rather than 'stateblock' in the code | |
| * below means it will be recorded in a state block change, but it | |
| * works regardless where it is recorded. | |
| * If this is found to be wrong, change to StateBlock. */ | |
| if (state > HIGHEST_TRANSFORMSTATE) | |
| { | |
| WARN("Unhandled transform state %#x.\n", state); | |
| return; | |
| } | |
| mat = &device->update_state->transforms[state]; | |
| multiply_matrix(&temp, mat, matrix); | |
| /* Apply change via set transform - will reapply to eg. lights this way. */ | |
| wined3d_device_set_transform(device, state, &temp); | |
| } | |
| /* Note lights are real special cases. Although the device caps state only | |
| * e.g. 8 are supported, you can reference any indexes you want as long as | |
| * that number max are enabled at any one point in time. Therefore since the | |
| * indices can be anything, we need a hashmap of them. However, this causes | |
| * stateblock problems. When capturing the state block, I duplicate the | |
| * hashmap, but when recording, just build a chain pretty much of commands to | |
| * be replayed. */ | |
| HRESULT CDECL wined3d_device_set_light(struct wined3d_device *device, | |
| UINT light_idx, const struct wined3d_light *light) | |
| { | |
| UINT hash_idx = LIGHTMAP_HASHFUNC(light_idx); | |
| struct wined3d_light_info *object = NULL; | |
| float rho; | |
| TRACE("device %p, light_idx %u, light %p.\n", device, light_idx, light); | |
| /* Check the parameter range. Need for speed most wanted sets junk lights | |
| * which confuse the GL driver. */ | |
| if (!light) | |
| return WINED3DERR_INVALIDCALL; | |
| switch (light->type) | |
| { | |
| case WINED3D_LIGHT_POINT: | |
| case WINED3D_LIGHT_SPOT: | |
| case WINED3D_LIGHT_GLSPOT: | |
| /* Incorrect attenuation values can cause the gl driver to crash. | |
| * Happens with Need for speed most wanted. */ | |
| if (light->attenuation0 < 0.0f || light->attenuation1 < 0.0f || light->attenuation2 < 0.0f) | |
| { | |
| WARN("Attenuation is negative, returning WINED3DERR_INVALIDCALL.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| break; | |
| case WINED3D_LIGHT_DIRECTIONAL: | |
| case WINED3D_LIGHT_PARALLELPOINT: | |
| /* Ignores attenuation */ | |
| break; | |
| default: | |
| WARN("Light type out of range, returning WINED3DERR_INVALIDCALL\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (!(object = wined3d_state_get_light(device->update_state, light_idx))) | |
| { | |
| TRACE("Adding new light\n"); | |
| object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*object)); | |
| if (!object) | |
| return E_OUTOFMEMORY; | |
| list_add_head(&device->update_state->light_map[hash_idx], &object->entry); | |
| object->glIndex = -1; | |
| object->OriginalIndex = light_idx; | |
| } | |
| /* Initialize the object. */ | |
| TRACE("Light %u setting to type %#x, diffuse %s, specular %s, ambient %s, " | |
| "position {%.8e, %.8e, %.8e}, direction {%.8e, %.8e, %.8e}, " | |
| "range %.8e, falloff %.8e, theta %.8e, phi %.8e.\n", | |
| light_idx, light->type, debug_color(&light->diffuse), | |
| debug_color(&light->specular), debug_color(&light->ambient), | |
| light->position.x, light->position.y, light->position.z, | |
| light->direction.x, light->direction.y, light->direction.z, | |
| light->range, light->falloff, light->theta, light->phi); | |
| /* Save away the information. */ | |
| object->OriginalParms = *light; | |
| switch (light->type) | |
| { | |
| case WINED3D_LIGHT_POINT: | |
| /* Position */ | |
| object->position.x = light->position.x; | |
| object->position.y = light->position.y; | |
| object->position.z = light->position.z; | |
| object->position.w = 1.0f; | |
| object->cutoff = 180.0f; | |
| /* FIXME: Range */ | |
| break; | |
| case WINED3D_LIGHT_DIRECTIONAL: | |
| /* Direction */ | |
| object->direction.x = -light->direction.x; | |
| object->direction.y = -light->direction.y; | |
| object->direction.z = -light->direction.z; | |
| object->direction.w = 0.0f; | |
| object->exponent = 0.0f; | |
| object->cutoff = 180.0f; | |
| break; | |
| case WINED3D_LIGHT_SPOT: | |
| /* Position */ | |
| object->position.x = light->position.x; | |
| object->position.y = light->position.y; | |
| object->position.z = light->position.z; | |
| object->position.w = 1.0f; | |
| /* Direction */ | |
| object->direction.x = light->direction.x; | |
| object->direction.y = light->direction.y; | |
| object->direction.z = light->direction.z; | |
| object->direction.w = 0.0f; | |
| /* opengl-ish and d3d-ish spot lights use too different models | |
| * for the light "intensity" as a function of the angle towards | |
| * the main light direction, so we only can approximate very | |
| * roughly. However, spot lights are rather rarely used in games | |
| * (if ever used at all). Furthermore if still used, probably | |
| * nobody pays attention to such details. */ | |
| if (!light->falloff) | |
| { | |
| /* Falloff = 0 is easy, because d3d's and opengl's spot light | |
| * equations have the falloff resp. exponent parameter as an | |
| * exponent, so the spot light lighting will always be 1.0 for | |
| * both of them, and we don't have to care for the rest of the | |
| * rather complex calculation. */ | |
| object->exponent = 0.0f; | |
| } | |
| else | |
| { | |
| rho = light->theta + (light->phi - light->theta) / (2 * light->falloff); | |
| if (rho < 0.0001f) | |
| rho = 0.0001f; | |
| object->exponent = -0.3f / logf(cosf(rho / 2)); | |
| } | |
| if (object->exponent > 128.0f) | |
| object->exponent = 128.0f; | |
| object->cutoff = (float)(light->phi * 90 / M_PI); | |
| /* FIXME: Range */ | |
| break; | |
| case WINED3D_LIGHT_PARALLELPOINT: | |
| object->position.x = light->position.x; | |
| object->position.y = light->position.y; | |
| object->position.z = light->position.z; | |
| object->position.w = 1.0f; | |
| break; | |
| default: | |
| FIXME("Unrecognized light type %#x.\n", light->type); | |
| } | |
| if (!device->recording) | |
| wined3d_cs_emit_set_light(device->cs, object); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_light(const struct wined3d_device *device, | |
| UINT light_idx, struct wined3d_light *light) | |
| { | |
| struct wined3d_light_info *light_info; | |
| TRACE("device %p, light_idx %u, light %p.\n", device, light_idx, light); | |
| if (!(light_info = wined3d_state_get_light(&device->state, light_idx))) | |
| { | |
| TRACE("Light information requested but light not defined\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| *light = light_info->OriginalParms; | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_set_light_enable(struct wined3d_device *device, UINT light_idx, BOOL enable) | |
| { | |
| struct wined3d_light_info *light_info; | |
| TRACE("device %p, light_idx %u, enable %#x.\n", device, light_idx, enable); | |
| /* Special case - enabling an undefined light creates one with a strict set of parameters. */ | |
| if (!(light_info = wined3d_state_get_light(device->update_state, light_idx))) | |
| { | |
| TRACE("Light enabled requested but light not defined, so defining one!\n"); | |
| wined3d_device_set_light(device, light_idx, &WINED3D_default_light); | |
| if (!(light_info = wined3d_state_get_light(device->update_state, light_idx))) | |
| { | |
| FIXME("Adding default lights has failed dismally\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| } | |
| wined3d_state_enable_light(device->update_state, &device->adapter->d3d_info, light_info, enable); | |
| if (!device->recording) | |
| wined3d_cs_emit_set_light_enable(device->cs, light_idx, enable); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_light_enable(const struct wined3d_device *device, UINT light_idx, BOOL *enable) | |
| { | |
| struct wined3d_light_info *light_info; | |
| TRACE("device %p, light_idx %u, enable %p.\n", device, light_idx, enable); | |
| if (!(light_info = wined3d_state_get_light(&device->state, light_idx))) | |
| { | |
| TRACE("Light enabled state requested but light not defined.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| /* true is 128 according to SetLightEnable */ | |
| *enable = light_info->enabled ? 128 : 0; | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_set_clip_plane(struct wined3d_device *device, | |
| UINT plane_idx, const struct wined3d_vec4 *plane) | |
| { | |
| TRACE("device %p, plane_idx %u, plane %p.\n", device, plane_idx, plane); | |
| /* Validate plane_idx. */ | |
| if (plane_idx >= device->adapter->gl_info.limits.user_clip_distances) | |
| { | |
| TRACE("Application has requested clipplane this device doesn't support.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (device->recording) | |
| device->recording->changed.clipplane |= 1u << plane_idx; | |
| if (!memcmp(&device->update_state->clip_planes[plane_idx], plane, sizeof(*plane))) | |
| { | |
| TRACE("Application is setting old values over, nothing to do.\n"); | |
| return WINED3D_OK; | |
| } | |
| device->update_state->clip_planes[plane_idx] = *plane; | |
| if (!device->recording) | |
| wined3d_cs_emit_set_clip_plane(device->cs, plane_idx, plane); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_clip_plane(const struct wined3d_device *device, | |
| UINT plane_idx, struct wined3d_vec4 *plane) | |
| { | |
| TRACE("device %p, plane_idx %u, plane %p.\n", device, plane_idx, plane); | |
| /* Validate plane_idx. */ | |
| if (plane_idx >= device->adapter->gl_info.limits.user_clip_distances) | |
| { | |
| TRACE("Application has requested clipplane this device doesn't support.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| *plane = device->state.clip_planes[plane_idx]; | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_set_clip_status(struct wined3d_device *device, | |
| const struct wined3d_clip_status *clip_status) | |
| { | |
| FIXME("device %p, clip_status %p stub!\n", device, clip_status); | |
| if (!clip_status) | |
| return WINED3DERR_INVALIDCALL; | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_clip_status(const struct wined3d_device *device, | |
| struct wined3d_clip_status *clip_status) | |
| { | |
| FIXME("device %p, clip_status %p stub!\n", device, clip_status); | |
| if (!clip_status) | |
| return WINED3DERR_INVALIDCALL; | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_set_material(struct wined3d_device *device, const struct wined3d_material *material) | |
| { | |
| TRACE("device %p, material %p.\n", device, material); | |
| device->update_state->material = *material; | |
| if (device->recording) | |
| device->recording->changed.material = TRUE; | |
| else | |
| wined3d_cs_emit_set_material(device->cs, material); | |
| } | |
| void CDECL wined3d_device_get_material(const struct wined3d_device *device, struct wined3d_material *material) | |
| { | |
| TRACE("device %p, material %p.\n", device, material); | |
| *material = device->state.material; | |
| TRACE("diffuse %s\n", debug_color(&material->diffuse)); | |
| TRACE("ambient %s\n", debug_color(&material->ambient)); | |
| TRACE("specular %s\n", debug_color(&material->specular)); | |
| TRACE("emissive %s\n", debug_color(&material->emissive)); | |
| TRACE("power %.8e.\n", material->power); | |
| } | |
| void CDECL wined3d_device_set_index_buffer(struct wined3d_device *device, | |
| struct wined3d_buffer *buffer, enum wined3d_format_id format_id, unsigned int offset) | |
| { | |
| enum wined3d_format_id prev_format; | |
| struct wined3d_buffer *prev_buffer; | |
| unsigned int prev_offset; | |
| TRACE("device %p, buffer %p, format %s, offset %u.\n", | |
| device, buffer, debug_d3dformat(format_id), offset); | |
| prev_buffer = device->update_state->index_buffer; | |
| prev_format = device->update_state->index_format; | |
| prev_offset = device->update_state->index_offset; | |
| device->update_state->index_buffer = buffer; | |
| device->update_state->index_format = format_id; | |
| device->update_state->index_offset = offset; | |
| if (device->recording) | |
| device->recording->changed.indices = TRUE; | |
| if (prev_buffer == buffer && prev_format == format_id && prev_offset == offset) | |
| return; | |
| if (buffer) | |
| wined3d_buffer_incref(buffer); | |
| if (!device->recording) | |
| wined3d_cs_emit_set_index_buffer(device->cs, buffer, format_id, offset); | |
| if (prev_buffer) | |
| wined3d_buffer_decref(prev_buffer); | |
| } | |
| struct wined3d_buffer * CDECL wined3d_device_get_index_buffer(const struct wined3d_device *device, | |
| enum wined3d_format_id *format, unsigned int *offset) | |
| { | |
| TRACE("device %p, format %p, offset %p.\n", device, format, offset); | |
| *format = device->state.index_format; | |
| if (offset) | |
| *offset = device->state.index_offset; | |
| return device->state.index_buffer; | |
| } | |
| void CDECL wined3d_device_set_base_vertex_index(struct wined3d_device *device, INT base_index) | |
| { | |
| TRACE("device %p, base_index %d.\n", device, base_index); | |
| device->update_state->base_vertex_index = base_index; | |
| } | |
| INT CDECL wined3d_device_get_base_vertex_index(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->state.base_vertex_index; | |
| } | |
| void CDECL wined3d_device_set_viewport(struct wined3d_device *device, const struct wined3d_viewport *viewport) | |
| { | |
| TRACE("device %p, viewport %p.\n", device, viewport); | |
| TRACE("x %.8e, y %.8e, w %.8e, h %.8e, min_z %.8e, max_z %.8e.\n", | |
| viewport->x, viewport->y, viewport->width, viewport->height, viewport->min_z, viewport->max_z); | |
| device->update_state->viewport = *viewport; | |
| /* Handle recording of state blocks */ | |
| if (device->recording) | |
| { | |
| TRACE("Recording... not performing anything\n"); | |
| device->recording->changed.viewport = TRUE; | |
| return; | |
| } | |
| wined3d_cs_emit_set_viewport(device->cs, viewport); | |
| } | |
| void CDECL wined3d_device_get_viewport(const struct wined3d_device *device, struct wined3d_viewport *viewport) | |
| { | |
| TRACE("device %p, viewport %p.\n", device, viewport); | |
| *viewport = device->state.viewport; | |
| } | |
| static void resolve_depth_buffer(struct wined3d_state *state) | |
| { | |
| struct wined3d_texture *dst_texture = state->textures[0]; | |
| struct wined3d_rendertarget_view *src_view; | |
| RECT src_rect, dst_rect; | |
| if (!dst_texture || dst_texture->resource.type != WINED3D_RTYPE_TEXTURE_2D | |
| || !(dst_texture->resource.format_flags & WINED3DFMT_FLAG_DEPTH)) | |
| return; | |
| if (!(src_view = state->fb->depth_stencil)) | |
| return; | |
| if (src_view->resource->type == WINED3D_RTYPE_BUFFER) | |
| { | |
| FIXME("Not supported on buffer resources.\n"); | |
| return; | |
| } | |
| SetRect(&dst_rect, 0, 0, dst_texture->resource.width, dst_texture->resource.height); | |
| SetRect(&src_rect, 0, 0, src_view->width, src_view->height); | |
| wined3d_texture_blt(dst_texture, 0, &dst_rect, texture_from_resource(src_view->resource), | |
| src_view->sub_resource_idx, &src_rect, 0, NULL, WINED3D_TEXF_POINT); | |
| } | |
| void CDECL wined3d_device_set_rasterizer_state(struct wined3d_device *device, | |
| struct wined3d_rasterizer_state *rasterizer_state) | |
| { | |
| struct wined3d_rasterizer_state *prev; | |
| TRACE("device %p, rasterizer_state %p.\n", device, rasterizer_state); | |
| prev = device->update_state->rasterizer_state; | |
| if (prev == rasterizer_state) | |
| return; | |
| if (rasterizer_state) | |
| wined3d_rasterizer_state_incref(rasterizer_state); | |
| device->update_state->rasterizer_state = rasterizer_state; | |
| wined3d_cs_emit_set_rasterizer_state(device->cs, rasterizer_state); | |
| if (prev) | |
| wined3d_rasterizer_state_decref(prev); | |
| } | |
| struct wined3d_rasterizer_state * CDECL wined3d_device_get_rasterizer_state(struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->state.rasterizer_state; | |
| } | |
| void CDECL wined3d_device_set_render_state(struct wined3d_device *device, | |
| enum wined3d_render_state state, DWORD value) | |
| { | |
| DWORD old_value; | |
| TRACE("device %p, state %s (%#x), value %#x.\n", device, debug_d3drenderstate(state), state, value); | |
| if (state > WINEHIGHEST_RENDER_STATE) | |
| { | |
| WARN("Unhandled render state %#x.\n", state); | |
| return; | |
| } | |
| old_value = device->state.render_states[state]; | |
| device->update_state->render_states[state] = value; | |
| /* Handle recording of state blocks. */ | |
| if (device->recording) | |
| { | |
| TRACE("Recording... not performing anything.\n"); | |
| device->recording->changed.renderState[state >> 5] |= 1u << (state & 0x1f); | |
| return; | |
| } | |
| /* Compared here and not before the assignment to allow proper stateblock recording. */ | |
| if (value == old_value) | |
| TRACE("Application is setting the old value over, nothing to do.\n"); | |
| else | |
| wined3d_cs_emit_set_render_state(device->cs, state, value); | |
| if (state == WINED3D_RS_POINTSIZE && value == WINED3D_RESZ_CODE) | |
| { | |
| TRACE("RESZ multisampled depth buffer resolve triggered.\n"); | |
| resolve_depth_buffer(&device->state); | |
| } | |
| } | |
| DWORD CDECL wined3d_device_get_render_state(const struct wined3d_device *device, enum wined3d_render_state state) | |
| { | |
| TRACE("device %p, state %s (%#x).\n", device, debug_d3drenderstate(state), state); | |
| return device->state.render_states[state]; | |
| } | |
| void CDECL wined3d_device_set_sampler_state(struct wined3d_device *device, | |
| UINT sampler_idx, enum wined3d_sampler_state state, DWORD value) | |
| { | |
| DWORD old_value; | |
| TRACE("device %p, sampler_idx %u, state %s, value %#x.\n", | |
| device, sampler_idx, debug_d3dsamplerstate(state), value); | |
| if (sampler_idx >= WINED3DVERTEXTEXTURESAMPLER0 && sampler_idx <= WINED3DVERTEXTEXTURESAMPLER3) | |
| sampler_idx -= (WINED3DVERTEXTEXTURESAMPLER0 - MAX_FRAGMENT_SAMPLERS); | |
| if (sampler_idx >= sizeof(device->state.sampler_states) / sizeof(*device->state.sampler_states)) | |
| { | |
| WARN("Invalid sampler %u.\n", sampler_idx); | |
| return; /* Windows accepts overflowing this array ... we do not. */ | |
| } | |
| old_value = device->state.sampler_states[sampler_idx][state]; | |
| device->update_state->sampler_states[sampler_idx][state] = value; | |
| /* Handle recording of state blocks. */ | |
| if (device->recording) | |
| { | |
| TRACE("Recording... not performing anything.\n"); | |
| device->recording->changed.samplerState[sampler_idx] |= 1u << state; | |
| return; | |
| } | |
| if (old_value == value) | |
| { | |
| TRACE("Application is setting the old value over, nothing to do.\n"); | |
| return; | |
| } | |
| wined3d_cs_emit_set_sampler_state(device->cs, sampler_idx, state, value); | |
| } | |
| DWORD CDECL wined3d_device_get_sampler_state(const struct wined3d_device *device, | |
| UINT sampler_idx, enum wined3d_sampler_state state) | |
| { | |
| TRACE("device %p, sampler_idx %u, state %s.\n", | |
| device, sampler_idx, debug_d3dsamplerstate(state)); | |
| if (sampler_idx >= WINED3DVERTEXTEXTURESAMPLER0 && sampler_idx <= WINED3DVERTEXTEXTURESAMPLER3) | |
| sampler_idx -= (WINED3DVERTEXTEXTURESAMPLER0 - MAX_FRAGMENT_SAMPLERS); | |
| if (sampler_idx >= sizeof(device->state.sampler_states) / sizeof(*device->state.sampler_states)) | |
| { | |
| WARN("Invalid sampler %u.\n", sampler_idx); | |
| return 0; /* Windows accepts overflowing this array ... we do not. */ | |
| } | |
| return device->state.sampler_states[sampler_idx][state]; | |
| } | |
| void CDECL wined3d_device_set_scissor_rect(struct wined3d_device *device, const RECT *rect) | |
| { | |
| TRACE("device %p, rect %s.\n", device, wine_dbgstr_rect(rect)); | |
| if (device->recording) | |
| device->recording->changed.scissorRect = TRUE; | |
| if (EqualRect(&device->update_state->scissor_rect, rect)) | |
| { | |
| TRACE("App is setting the old scissor rectangle over, nothing to do.\n"); | |
| return; | |
| } | |
| CopyRect(&device->update_state->scissor_rect, rect); | |
| if (device->recording) | |
| { | |
| TRACE("Recording... not performing anything.\n"); | |
| return; | |
| } | |
| wined3d_cs_emit_set_scissor_rect(device->cs, rect); | |
| } | |
| void CDECL wined3d_device_get_scissor_rect(const struct wined3d_device *device, RECT *rect) | |
| { | |
| TRACE("device %p, rect %p.\n", device, rect); | |
| *rect = device->state.scissor_rect; | |
| TRACE("Returning rect %s.\n", wine_dbgstr_rect(rect)); | |
| } | |
| void CDECL wined3d_device_set_vertex_declaration(struct wined3d_device *device, | |
| struct wined3d_vertex_declaration *declaration) | |
| { | |
| struct wined3d_vertex_declaration *prev = device->update_state->vertex_declaration; | |
| TRACE("device %p, declaration %p.\n", device, declaration); | |
| if (device->recording) | |
| device->recording->changed.vertexDecl = TRUE; | |
| if (declaration == prev) | |
| return; | |
| if (declaration) | |
| wined3d_vertex_declaration_incref(declaration); | |
| device->update_state->vertex_declaration = declaration; | |
| if (!device->recording) | |
| wined3d_cs_emit_set_vertex_declaration(device->cs, declaration); | |
| if (prev) | |
| wined3d_vertex_declaration_decref(prev); | |
| } | |
| struct wined3d_vertex_declaration * CDECL wined3d_device_get_vertex_declaration(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->state.vertex_declaration; | |
| } | |
| void CDECL wined3d_device_set_vertex_shader(struct wined3d_device *device, struct wined3d_shader *shader) | |
| { | |
| struct wined3d_shader *prev = device->update_state->shader[WINED3D_SHADER_TYPE_VERTEX]; | |
| TRACE("device %p, shader %p.\n", device, shader); | |
| if (device->recording) | |
| device->recording->changed.vertexShader = TRUE; | |
| if (shader == prev) | |
| return; | |
| if (shader) | |
| wined3d_shader_incref(shader); | |
| device->update_state->shader[WINED3D_SHADER_TYPE_VERTEX] = shader; | |
| if (!device->recording) | |
| wined3d_cs_emit_set_shader(device->cs, WINED3D_SHADER_TYPE_VERTEX, shader); | |
| if (prev) | |
| wined3d_shader_decref(prev); | |
| } | |
| struct wined3d_shader * CDECL wined3d_device_get_vertex_shader(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->state.shader[WINED3D_SHADER_TYPE_VERTEX]; | |
| } | |
| static void wined3d_device_set_constant_buffer(struct wined3d_device *device, | |
| enum wined3d_shader_type type, UINT idx, struct wined3d_buffer *buffer) | |
| { | |
| struct wined3d_buffer *prev; | |
| if (idx >= MAX_CONSTANT_BUFFERS) | |
| { | |
| WARN("Invalid constant buffer index %u.\n", idx); | |
| return; | |
| } | |
| prev = device->update_state->cb[type][idx]; | |
| if (buffer == prev) | |
| return; | |
| if (buffer) | |
| wined3d_buffer_incref(buffer); | |
| device->update_state->cb[type][idx] = buffer; | |
| if (!device->recording) | |
| wined3d_cs_emit_set_constant_buffer(device->cs, type, idx, buffer); | |
| if (prev) | |
| wined3d_buffer_decref(prev); | |
| } | |
| void CDECL wined3d_device_set_vs_cb(struct wined3d_device *device, UINT idx, struct wined3d_buffer *buffer) | |
| { | |
| TRACE("device %p, idx %u, buffer %p.\n", device, idx, buffer); | |
| wined3d_device_set_constant_buffer(device, WINED3D_SHADER_TYPE_VERTEX, idx, buffer); | |
| } | |
| static struct wined3d_buffer *wined3d_device_get_constant_buffer(const struct wined3d_device *device, | |
| enum wined3d_shader_type shader_type, unsigned int idx) | |
| { | |
| if (idx >= MAX_CONSTANT_BUFFERS) | |
| { | |
| WARN("Invalid constant buffer index %u.\n", idx); | |
| return NULL; | |
| } | |
| return device->state.cb[shader_type][idx]; | |
| } | |
| struct wined3d_buffer * CDECL wined3d_device_get_vs_cb(const struct wined3d_device *device, UINT idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_constant_buffer(device, WINED3D_SHADER_TYPE_VERTEX, idx); | |
| } | |
| static void wined3d_device_set_shader_resource_view(struct wined3d_device *device, | |
| enum wined3d_shader_type type, UINT idx, struct wined3d_shader_resource_view *view) | |
| { | |
| struct wined3d_shader_resource_view *prev; | |
| if (idx >= MAX_SHADER_RESOURCE_VIEWS) | |
| { | |
| WARN("Invalid view index %u.\n", idx); | |
| return; | |
| } | |
| prev = device->update_state->shader_resource_view[type][idx]; | |
| if (view == prev) | |
| return; | |
| if (view) | |
| wined3d_shader_resource_view_incref(view); | |
| device->update_state->shader_resource_view[type][idx] = view; | |
| if (!device->recording) | |
| wined3d_cs_emit_set_shader_resource_view(device->cs, type, idx, view); | |
| if (prev) | |
| wined3d_shader_resource_view_decref(prev); | |
| } | |
| void CDECL wined3d_device_set_vs_resource_view(struct wined3d_device *device, | |
| UINT idx, struct wined3d_shader_resource_view *view) | |
| { | |
| TRACE("device %p, idx %u, view %p.\n", device, idx, view); | |
| wined3d_device_set_shader_resource_view(device, WINED3D_SHADER_TYPE_VERTEX, idx, view); | |
| } | |
| static struct wined3d_shader_resource_view *wined3d_device_get_shader_resource_view( | |
| const struct wined3d_device *device, enum wined3d_shader_type shader_type, unsigned int idx) | |
| { | |
| if (idx >= MAX_SHADER_RESOURCE_VIEWS) | |
| { | |
| WARN("Invalid view index %u.\n", idx); | |
| return NULL; | |
| } | |
| return device->state.shader_resource_view[shader_type][idx]; | |
| } | |
| struct wined3d_shader_resource_view * CDECL wined3d_device_get_vs_resource_view(const struct wined3d_device *device, | |
| UINT idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_shader_resource_view(device, WINED3D_SHADER_TYPE_VERTEX, idx); | |
| } | |
| static void wined3d_device_set_sampler(struct wined3d_device *device, | |
| enum wined3d_shader_type type, UINT idx, struct wined3d_sampler *sampler) | |
| { | |
| struct wined3d_sampler *prev; | |
| if (idx >= MAX_SAMPLER_OBJECTS) | |
| { | |
| WARN("Invalid sampler index %u.\n", idx); | |
| return; | |
| } | |
| prev = device->update_state->sampler[type][idx]; | |
| if (sampler == prev) | |
| return; | |
| if (sampler) | |
| wined3d_sampler_incref(sampler); | |
| device->update_state->sampler[type][idx] = sampler; | |
| if (!device->recording) | |
| wined3d_cs_emit_set_sampler(device->cs, type, idx, sampler); | |
| if (prev) | |
| wined3d_sampler_decref(prev); | |
| } | |
| void CDECL wined3d_device_set_vs_sampler(struct wined3d_device *device, UINT idx, struct wined3d_sampler *sampler) | |
| { | |
| TRACE("device %p, idx %u, sampler %p.\n", device, idx, sampler); | |
| wined3d_device_set_sampler(device, WINED3D_SHADER_TYPE_VERTEX, idx, sampler); | |
| } | |
| static struct wined3d_sampler *wined3d_device_get_sampler(const struct wined3d_device *device, | |
| enum wined3d_shader_type shader_type, unsigned int idx) | |
| { | |
| if (idx >= MAX_SAMPLER_OBJECTS) | |
| { | |
| WARN("Invalid sampler index %u.\n", idx); | |
| return NULL; | |
| } | |
| return device->state.sampler[shader_type][idx]; | |
| } | |
| struct wined3d_sampler * CDECL wined3d_device_get_vs_sampler(const struct wined3d_device *device, UINT idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_sampler(device, WINED3D_SHADER_TYPE_VERTEX, idx); | |
| } | |
| HRESULT CDECL wined3d_device_set_vs_consts_b(struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, const BOOL *constants) | |
| { | |
| unsigned int i; | |
| TRACE("device %p, start_idx %u, count %u, constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= WINED3D_MAX_CONSTS_B) | |
| return WINED3DERR_INVALIDCALL; | |
| if (count > WINED3D_MAX_CONSTS_B - start_idx) | |
| count = WINED3D_MAX_CONSTS_B - start_idx; | |
| memcpy(&device->update_state->vs_consts_b[start_idx], constants, count * sizeof(*constants)); | |
| if (TRACE_ON(d3d)) | |
| { | |
| for (i = 0; i < count; ++i) | |
| TRACE("Set BOOL constant %u to %#x.\n", start_idx + i, constants[i]); | |
| } | |
| if (device->recording) | |
| { | |
| for (i = start_idx; i < count + start_idx; ++i) | |
| device->recording->changed.vertexShaderConstantsB |= (1u << i); | |
| } | |
| else | |
| { | |
| wined3d_cs_push_constants(device->cs, WINED3D_PUSH_CONSTANTS_VS_B, start_idx, count, constants); | |
| } | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_vs_consts_b(const struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, BOOL *constants) | |
| { | |
| TRACE("device %p, start_idx %u, count %u, constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= WINED3D_MAX_CONSTS_B) | |
| return WINED3DERR_INVALIDCALL; | |
| if (count > WINED3D_MAX_CONSTS_B - start_idx) | |
| count = WINED3D_MAX_CONSTS_B - start_idx; | |
| memcpy(constants, &device->state.vs_consts_b[start_idx], count * sizeof(*constants)); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_set_vs_consts_i(struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, const struct wined3d_ivec4 *constants) | |
| { | |
| unsigned int i; | |
| TRACE("device %p, start_idx %u, count %u, constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= WINED3D_MAX_CONSTS_I) | |
| return WINED3DERR_INVALIDCALL; | |
| if (count > WINED3D_MAX_CONSTS_I - start_idx) | |
| count = WINED3D_MAX_CONSTS_I - start_idx; | |
| memcpy(&device->update_state->vs_consts_i[start_idx], constants, count * sizeof(*constants)); | |
| if (TRACE_ON(d3d)) | |
| { | |
| for (i = 0; i < count; ++i) | |
| TRACE("Set ivec4 constant %u to %s.\n", start_idx + i, debug_ivec4(&constants[i])); | |
| } | |
| if (device->recording) | |
| { | |
| for (i = start_idx; i < count + start_idx; ++i) | |
| device->recording->changed.vertexShaderConstantsI |= (1u << i); | |
| } | |
| else | |
| { | |
| wined3d_cs_push_constants(device->cs, WINED3D_PUSH_CONSTANTS_VS_I, start_idx, count, constants); | |
| } | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_vs_consts_i(const struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, struct wined3d_ivec4 *constants) | |
| { | |
| TRACE("device %p, start_idx %u, count %u, constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= WINED3D_MAX_CONSTS_I) | |
| return WINED3DERR_INVALIDCALL; | |
| if (count > WINED3D_MAX_CONSTS_I - start_idx) | |
| count = WINED3D_MAX_CONSTS_I - start_idx; | |
| memcpy(constants, &device->state.vs_consts_i[start_idx], count * sizeof(*constants)); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_set_vs_consts_f(struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, const struct wined3d_vec4 *constants) | |
| { | |
| const struct wined3d_d3d_info *d3d_info = &device->adapter->d3d_info; | |
| unsigned int i; | |
| TRACE("device %p, start_idx %u, count %u, constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= d3d_info->limits.vs_uniform_count | |
| || count > d3d_info->limits.vs_uniform_count - start_idx) | |
| return WINED3DERR_INVALIDCALL; | |
| memcpy(&device->update_state->vs_consts_f[start_idx], constants, count * sizeof(*constants)); | |
| if (TRACE_ON(d3d)) | |
| { | |
| for (i = 0; i < count; ++i) | |
| TRACE("Set vec4 constant %u to %s.\n", start_idx + i, debug_vec4(&constants[i])); | |
| } | |
| if (device->recording) | |
| memset(&device->recording->changed.vs_consts_f[start_idx], 1, | |
| count * sizeof(*device->recording->changed.vs_consts_f)); | |
| else | |
| wined3d_cs_push_constants(device->cs, WINED3D_PUSH_CONSTANTS_VS_F, start_idx, count, constants); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_vs_consts_f(const struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, struct wined3d_vec4 *constants) | |
| { | |
| const struct wined3d_d3d_info *d3d_info = &device->adapter->d3d_info; | |
| TRACE("device %p, start_idx %u, count %u, constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= d3d_info->limits.vs_uniform_count | |
| || count > d3d_info->limits.vs_uniform_count - start_idx) | |
| return WINED3DERR_INVALIDCALL; | |
| memcpy(constants, &device->state.vs_consts_f[start_idx], count * sizeof(*constants)); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_set_pixel_shader(struct wined3d_device *device, struct wined3d_shader *shader) | |
| { | |
| struct wined3d_shader *prev = device->update_state->shader[WINED3D_SHADER_TYPE_PIXEL]; | |
| TRACE("device %p, shader %p.\n", device, shader); | |
| if (device->recording) | |
| device->recording->changed.pixelShader = TRUE; | |
| if (shader == prev) | |
| return; | |
| if (shader) | |
| wined3d_shader_incref(shader); | |
| device->update_state->shader[WINED3D_SHADER_TYPE_PIXEL] = shader; | |
| if (!device->recording) | |
| wined3d_cs_emit_set_shader(device->cs, WINED3D_SHADER_TYPE_PIXEL, shader); | |
| if (prev) | |
| wined3d_shader_decref(prev); | |
| } | |
| struct wined3d_shader * CDECL wined3d_device_get_pixel_shader(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->state.shader[WINED3D_SHADER_TYPE_PIXEL]; | |
| } | |
| void CDECL wined3d_device_set_ps_cb(struct wined3d_device *device, UINT idx, struct wined3d_buffer *buffer) | |
| { | |
| TRACE("device %p, idx %u, buffer %p.\n", device, idx, buffer); | |
| wined3d_device_set_constant_buffer(device, WINED3D_SHADER_TYPE_PIXEL, idx, buffer); | |
| } | |
| struct wined3d_buffer * CDECL wined3d_device_get_ps_cb(const struct wined3d_device *device, UINT idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_constant_buffer(device, WINED3D_SHADER_TYPE_PIXEL, idx); | |
| } | |
| void CDECL wined3d_device_set_ps_resource_view(struct wined3d_device *device, | |
| UINT idx, struct wined3d_shader_resource_view *view) | |
| { | |
| TRACE("device %p, idx %u, view %p.\n", device, idx, view); | |
| wined3d_device_set_shader_resource_view(device, WINED3D_SHADER_TYPE_PIXEL, idx, view); | |
| } | |
| struct wined3d_shader_resource_view * CDECL wined3d_device_get_ps_resource_view(const struct wined3d_device *device, | |
| UINT idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_shader_resource_view(device, WINED3D_SHADER_TYPE_PIXEL, idx); | |
| } | |
| void CDECL wined3d_device_set_ps_sampler(struct wined3d_device *device, UINT idx, struct wined3d_sampler *sampler) | |
| { | |
| TRACE("device %p, idx %u, sampler %p.\n", device, idx, sampler); | |
| wined3d_device_set_sampler(device, WINED3D_SHADER_TYPE_PIXEL, idx, sampler); | |
| } | |
| struct wined3d_sampler * CDECL wined3d_device_get_ps_sampler(const struct wined3d_device *device, UINT idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_sampler(device, WINED3D_SHADER_TYPE_PIXEL, idx); | |
| } | |
| HRESULT CDECL wined3d_device_set_ps_consts_b(struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, const BOOL *constants) | |
| { | |
| unsigned int i; | |
| TRACE("device %p, start_idx %u, count %u, constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= WINED3D_MAX_CONSTS_B) | |
| return WINED3DERR_INVALIDCALL; | |
| if (count > WINED3D_MAX_CONSTS_B - start_idx) | |
| count = WINED3D_MAX_CONSTS_B - start_idx; | |
| memcpy(&device->update_state->ps_consts_b[start_idx], constants, count * sizeof(*constants)); | |
| if (TRACE_ON(d3d)) | |
| { | |
| for (i = 0; i < count; ++i) | |
| TRACE("Set BOOL constant %u to %#x.\n", start_idx + i, constants[i]); | |
| } | |
| if (device->recording) | |
| { | |
| for (i = start_idx; i < count + start_idx; ++i) | |
| device->recording->changed.pixelShaderConstantsB |= (1u << i); | |
| } | |
| else | |
| { | |
| wined3d_cs_push_constants(device->cs, WINED3D_PUSH_CONSTANTS_PS_B, start_idx, count, constants); | |
| } | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_ps_consts_b(const struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, BOOL *constants) | |
| { | |
| TRACE("device %p, start_idx %u, count %u,constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= WINED3D_MAX_CONSTS_B) | |
| return WINED3DERR_INVALIDCALL; | |
| if (count > WINED3D_MAX_CONSTS_B - start_idx) | |
| count = WINED3D_MAX_CONSTS_B - start_idx; | |
| memcpy(constants, &device->state.ps_consts_b[start_idx], count * sizeof(*constants)); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_set_ps_consts_i(struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, const struct wined3d_ivec4 *constants) | |
| { | |
| unsigned int i; | |
| TRACE("device %p, start_idx %u, count %u, constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= WINED3D_MAX_CONSTS_I) | |
| return WINED3DERR_INVALIDCALL; | |
| if (count > WINED3D_MAX_CONSTS_I - start_idx) | |
| count = WINED3D_MAX_CONSTS_I - start_idx; | |
| memcpy(&device->update_state->ps_consts_i[start_idx], constants, count * sizeof(*constants)); | |
| if (TRACE_ON(d3d)) | |
| { | |
| for (i = 0; i < count; ++i) | |
| TRACE("Set ivec4 constant %u to %s.\n", start_idx + i, debug_ivec4(&constants[i])); | |
| } | |
| if (device->recording) | |
| { | |
| for (i = start_idx; i < count + start_idx; ++i) | |
| device->recording->changed.pixelShaderConstantsI |= (1u << i); | |
| } | |
| else | |
| { | |
| wined3d_cs_push_constants(device->cs, WINED3D_PUSH_CONSTANTS_PS_I, start_idx, count, constants); | |
| } | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_ps_consts_i(const struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, struct wined3d_ivec4 *constants) | |
| { | |
| TRACE("device %p, start_idx %u, count %u, constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= WINED3D_MAX_CONSTS_I) | |
| return WINED3DERR_INVALIDCALL; | |
| if (count > WINED3D_MAX_CONSTS_I - start_idx) | |
| count = WINED3D_MAX_CONSTS_I - start_idx; | |
| memcpy(constants, &device->state.ps_consts_i[start_idx], count * sizeof(*constants)); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_set_ps_consts_f(struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, const struct wined3d_vec4 *constants) | |
| { | |
| const struct wined3d_d3d_info *d3d_info = &device->adapter->d3d_info; | |
| unsigned int i; | |
| TRACE("device %p, start_idx %u, count %u, constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= d3d_info->limits.ps_uniform_count | |
| || count > d3d_info->limits.ps_uniform_count - start_idx) | |
| return WINED3DERR_INVALIDCALL; | |
| memcpy(&device->update_state->ps_consts_f[start_idx], constants, count * sizeof(*constants)); | |
| if (TRACE_ON(d3d)) | |
| { | |
| for (i = 0; i < count; ++i) | |
| TRACE("Set vec4 constant %u to %s.\n", start_idx + i, debug_vec4(&constants[i])); | |
| } | |
| if (device->recording) | |
| memset(&device->recording->changed.ps_consts_f[start_idx], 1, | |
| count * sizeof(*device->recording->changed.ps_consts_f)); | |
| else | |
| wined3d_cs_push_constants(device->cs, WINED3D_PUSH_CONSTANTS_PS_F, start_idx, count, constants); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_get_ps_consts_f(const struct wined3d_device *device, | |
| unsigned int start_idx, unsigned int count, struct wined3d_vec4 *constants) | |
| { | |
| const struct wined3d_d3d_info *d3d_info = &device->adapter->d3d_info; | |
| TRACE("device %p, start_idx %u, count %u, constants %p.\n", | |
| device, start_idx, count, constants); | |
| if (!constants || start_idx >= d3d_info->limits.ps_uniform_count | |
| || count > d3d_info->limits.ps_uniform_count - start_idx) | |
| return WINED3DERR_INVALIDCALL; | |
| memcpy(constants, &device->state.ps_consts_f[start_idx], count * sizeof(*constants)); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_set_hull_shader(struct wined3d_device *device, struct wined3d_shader *shader) | |
| { | |
| struct wined3d_shader *prev; | |
| TRACE("device %p, shader %p.\n", device, shader); | |
| prev = device->update_state->shader[WINED3D_SHADER_TYPE_HULL]; | |
| if (shader == prev) | |
| return; | |
| if (shader) | |
| wined3d_shader_incref(shader); | |
| device->update_state->shader[WINED3D_SHADER_TYPE_HULL] = shader; | |
| wined3d_cs_emit_set_shader(device->cs, WINED3D_SHADER_TYPE_HULL, shader); | |
| if (prev) | |
| wined3d_shader_decref(prev); | |
| } | |
| struct wined3d_shader * CDECL wined3d_device_get_hull_shader(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->state.shader[WINED3D_SHADER_TYPE_HULL]; | |
| } | |
| void CDECL wined3d_device_set_hs_cb(struct wined3d_device *device, unsigned int idx, struct wined3d_buffer *buffer) | |
| { | |
| TRACE("device %p, idx %u, buffer %p.\n", device, idx, buffer); | |
| wined3d_device_set_constant_buffer(device, WINED3D_SHADER_TYPE_HULL, idx, buffer); | |
| } | |
| struct wined3d_buffer * CDECL wined3d_device_get_hs_cb(const struct wined3d_device *device, unsigned int idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_constant_buffer(device, WINED3D_SHADER_TYPE_HULL, idx); | |
| } | |
| void CDECL wined3d_device_set_hs_resource_view(struct wined3d_device *device, | |
| unsigned int idx, struct wined3d_shader_resource_view *view) | |
| { | |
| TRACE("device %p, idx %u, view %p.\n", device, idx, view); | |
| wined3d_device_set_shader_resource_view(device, WINED3D_SHADER_TYPE_HULL, idx, view); | |
| } | |
| struct wined3d_shader_resource_view * CDECL wined3d_device_get_hs_resource_view(const struct wined3d_device *device, | |
| unsigned int idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_shader_resource_view(device, WINED3D_SHADER_TYPE_HULL, idx); | |
| } | |
| void CDECL wined3d_device_set_hs_sampler(struct wined3d_device *device, | |
| unsigned int idx, struct wined3d_sampler *sampler) | |
| { | |
| TRACE("device %p, idx %u, sampler %p.\n", device, idx, sampler); | |
| wined3d_device_set_sampler(device, WINED3D_SHADER_TYPE_HULL, idx, sampler); | |
| } | |
| struct wined3d_sampler * CDECL wined3d_device_get_hs_sampler(const struct wined3d_device *device, unsigned int idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_sampler(device, WINED3D_SHADER_TYPE_HULL, idx); | |
| } | |
| void CDECL wined3d_device_set_domain_shader(struct wined3d_device *device, struct wined3d_shader *shader) | |
| { | |
| struct wined3d_shader *prev; | |
| TRACE("device %p, shader %p.\n", device, shader); | |
| prev = device->update_state->shader[WINED3D_SHADER_TYPE_DOMAIN]; | |
| if (shader == prev) | |
| return; | |
| if (shader) | |
| wined3d_shader_incref(shader); | |
| device->update_state->shader[WINED3D_SHADER_TYPE_DOMAIN] = shader; | |
| wined3d_cs_emit_set_shader(device->cs, WINED3D_SHADER_TYPE_DOMAIN, shader); | |
| if (prev) | |
| wined3d_shader_decref(prev); | |
| } | |
| struct wined3d_shader * CDECL wined3d_device_get_domain_shader(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->state.shader[WINED3D_SHADER_TYPE_DOMAIN]; | |
| } | |
| void CDECL wined3d_device_set_ds_cb(struct wined3d_device *device, unsigned int idx, struct wined3d_buffer *buffer) | |
| { | |
| TRACE("device %p, idx %u, buffer %p.\n", device, idx, buffer); | |
| wined3d_device_set_constant_buffer(device, WINED3D_SHADER_TYPE_DOMAIN, idx, buffer); | |
| } | |
| struct wined3d_buffer * CDECL wined3d_device_get_ds_cb(const struct wined3d_device *device, unsigned int idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_constant_buffer(device, WINED3D_SHADER_TYPE_DOMAIN, idx); | |
| } | |
| void CDECL wined3d_device_set_ds_resource_view(struct wined3d_device *device, | |
| unsigned int idx, struct wined3d_shader_resource_view *view) | |
| { | |
| TRACE("device %p, idx %u, view %p.\n", device, idx, view); | |
| wined3d_device_set_shader_resource_view(device, WINED3D_SHADER_TYPE_DOMAIN, idx, view); | |
| } | |
| struct wined3d_shader_resource_view * CDECL wined3d_device_get_ds_resource_view(const struct wined3d_device *device, | |
| unsigned int idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_shader_resource_view(device, WINED3D_SHADER_TYPE_DOMAIN, idx); | |
| } | |
| void CDECL wined3d_device_set_ds_sampler(struct wined3d_device *device, | |
| unsigned int idx, struct wined3d_sampler *sampler) | |
| { | |
| TRACE("device %p, idx %u, sampler %p.\n", device, idx, sampler); | |
| wined3d_device_set_sampler(device, WINED3D_SHADER_TYPE_DOMAIN, idx, sampler); | |
| } | |
| struct wined3d_sampler * CDECL wined3d_device_get_ds_sampler(const struct wined3d_device *device, unsigned int idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_sampler(device, WINED3D_SHADER_TYPE_DOMAIN, idx); | |
| } | |
| void CDECL wined3d_device_set_geometry_shader(struct wined3d_device *device, struct wined3d_shader *shader) | |
| { | |
| struct wined3d_shader *prev = device->update_state->shader[WINED3D_SHADER_TYPE_GEOMETRY]; | |
| TRACE("device %p, shader %p.\n", device, shader); | |
| if (device->recording || shader == prev) | |
| return; | |
| if (shader) | |
| wined3d_shader_incref(shader); | |
| device->update_state->shader[WINED3D_SHADER_TYPE_GEOMETRY] = shader; | |
| wined3d_cs_emit_set_shader(device->cs, WINED3D_SHADER_TYPE_GEOMETRY, shader); | |
| if (prev) | |
| wined3d_shader_decref(prev); | |
| } | |
| struct wined3d_shader * CDECL wined3d_device_get_geometry_shader(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->state.shader[WINED3D_SHADER_TYPE_GEOMETRY]; | |
| } | |
| void CDECL wined3d_device_set_gs_cb(struct wined3d_device *device, UINT idx, struct wined3d_buffer *buffer) | |
| { | |
| TRACE("device %p, idx %u, buffer %p.\n", device, idx, buffer); | |
| wined3d_device_set_constant_buffer(device, WINED3D_SHADER_TYPE_GEOMETRY, idx, buffer); | |
| } | |
| struct wined3d_buffer * CDECL wined3d_device_get_gs_cb(const struct wined3d_device *device, UINT idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_constant_buffer(device, WINED3D_SHADER_TYPE_GEOMETRY, idx); | |
| } | |
| void CDECL wined3d_device_set_gs_resource_view(struct wined3d_device *device, | |
| UINT idx, struct wined3d_shader_resource_view *view) | |
| { | |
| TRACE("device %p, idx %u, view %p.\n", device, idx, view); | |
| wined3d_device_set_shader_resource_view(device, WINED3D_SHADER_TYPE_GEOMETRY, idx, view); | |
| } | |
| struct wined3d_shader_resource_view * CDECL wined3d_device_get_gs_resource_view(const struct wined3d_device *device, | |
| UINT idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_shader_resource_view(device, WINED3D_SHADER_TYPE_GEOMETRY, idx); | |
| } | |
| void CDECL wined3d_device_set_gs_sampler(struct wined3d_device *device, UINT idx, struct wined3d_sampler *sampler) | |
| { | |
| TRACE("device %p, idx %u, sampler %p.\n", device, idx, sampler); | |
| wined3d_device_set_sampler(device, WINED3D_SHADER_TYPE_GEOMETRY, idx, sampler); | |
| } | |
| struct wined3d_sampler * CDECL wined3d_device_get_gs_sampler(const struct wined3d_device *device, UINT idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_sampler(device, WINED3D_SHADER_TYPE_GEOMETRY, idx); | |
| } | |
| void CDECL wined3d_device_set_compute_shader(struct wined3d_device *device, struct wined3d_shader *shader) | |
| { | |
| struct wined3d_shader *prev; | |
| TRACE("device %p, shader %p.\n", device, shader); | |
| prev = device->update_state->shader[WINED3D_SHADER_TYPE_COMPUTE]; | |
| if (device->recording || shader == prev) | |
| return; | |
| if (shader) | |
| wined3d_shader_incref(shader); | |
| device->update_state->shader[WINED3D_SHADER_TYPE_COMPUTE] = shader; | |
| wined3d_cs_emit_set_shader(device->cs, WINED3D_SHADER_TYPE_COMPUTE, shader); | |
| if (prev) | |
| wined3d_shader_decref(prev); | |
| } | |
| struct wined3d_shader * CDECL wined3d_device_get_compute_shader(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->state.shader[WINED3D_SHADER_TYPE_COMPUTE]; | |
| } | |
| void CDECL wined3d_device_set_cs_cb(struct wined3d_device *device, unsigned int idx, struct wined3d_buffer *buffer) | |
| { | |
| TRACE("device %p, idx %u, buffer %p.\n", device, idx, buffer); | |
| wined3d_device_set_constant_buffer(device, WINED3D_SHADER_TYPE_COMPUTE, idx, buffer); | |
| } | |
| struct wined3d_buffer * CDECL wined3d_device_get_cs_cb(const struct wined3d_device *device, unsigned int idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_constant_buffer(device, WINED3D_SHADER_TYPE_COMPUTE, idx); | |
| } | |
| void CDECL wined3d_device_set_cs_resource_view(struct wined3d_device *device, | |
| unsigned int idx, struct wined3d_shader_resource_view *view) | |
| { | |
| TRACE("device %p, idx %u, view %p.\n", device, idx, view); | |
| wined3d_device_set_shader_resource_view(device, WINED3D_SHADER_TYPE_COMPUTE, idx, view); | |
| } | |
| struct wined3d_shader_resource_view * CDECL wined3d_device_get_cs_resource_view(const struct wined3d_device *device, | |
| unsigned int idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_shader_resource_view(device, WINED3D_SHADER_TYPE_COMPUTE, idx); | |
| } | |
| void CDECL wined3d_device_set_cs_sampler(struct wined3d_device *device, | |
| unsigned int idx, struct wined3d_sampler *sampler) | |
| { | |
| TRACE("device %p, idx %u, sampler %p.\n", device, idx, sampler); | |
| wined3d_device_set_sampler(device, WINED3D_SHADER_TYPE_COMPUTE, idx, sampler); | |
| } | |
| struct wined3d_sampler * CDECL wined3d_device_get_cs_sampler(const struct wined3d_device *device, unsigned int idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_sampler(device, WINED3D_SHADER_TYPE_COMPUTE, idx); | |
| } | |
| static void wined3d_device_set_pipeline_unordered_access_view(struct wined3d_device *device, | |
| enum wined3d_pipeline pipeline, unsigned int idx, struct wined3d_unordered_access_view *uav, | |
| unsigned int initial_count) | |
| { | |
| struct wined3d_unordered_access_view *prev; | |
| if (idx >= MAX_UNORDERED_ACCESS_VIEWS) | |
| { | |
| WARN("Invalid UAV index %u.\n", idx); | |
| return; | |
| } | |
| prev = device->update_state->unordered_access_view[pipeline][idx]; | |
| if (uav == prev && initial_count == ~0u) | |
| return; | |
| if (uav) | |
| wined3d_unordered_access_view_incref(uav); | |
| device->update_state->unordered_access_view[pipeline][idx] = uav; | |
| if (!device->recording) | |
| wined3d_cs_emit_set_unordered_access_view(device->cs, pipeline, idx, uav, initial_count); | |
| if (prev) | |
| wined3d_unordered_access_view_decref(prev); | |
| } | |
| static struct wined3d_unordered_access_view *wined3d_device_get_pipeline_unordered_access_view( | |
| const struct wined3d_device *device, enum wined3d_pipeline pipeline, unsigned int idx) | |
| { | |
| if (idx >= MAX_UNORDERED_ACCESS_VIEWS) | |
| { | |
| WARN("Invalid UAV index %u.\n", idx); | |
| return NULL; | |
| } | |
| return device->state.unordered_access_view[pipeline][idx]; | |
| } | |
| void CDECL wined3d_device_set_cs_uav(struct wined3d_device *device, unsigned int idx, | |
| struct wined3d_unordered_access_view *uav, unsigned int initial_count) | |
| { | |
| TRACE("device %p, idx %u, uav %p, initial_count %#x.\n", device, idx, uav, initial_count); | |
| wined3d_device_set_pipeline_unordered_access_view(device, WINED3D_PIPELINE_COMPUTE, idx, uav, initial_count); | |
| } | |
| struct wined3d_unordered_access_view * CDECL wined3d_device_get_cs_uav(const struct wined3d_device *device, | |
| unsigned int idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_pipeline_unordered_access_view(device, WINED3D_PIPELINE_COMPUTE, idx); | |
| } | |
| void CDECL wined3d_device_set_unordered_access_view(struct wined3d_device *device, | |
| unsigned int idx, struct wined3d_unordered_access_view *uav, unsigned int initial_count) | |
| { | |
| TRACE("device %p, idx %u, uav %p, initial_count %#x.\n", device, idx, uav, initial_count); | |
| wined3d_device_set_pipeline_unordered_access_view(device, WINED3D_PIPELINE_GRAPHICS, idx, uav, initial_count); | |
| } | |
| struct wined3d_unordered_access_view * CDECL wined3d_device_get_unordered_access_view( | |
| const struct wined3d_device *device, unsigned int idx) | |
| { | |
| TRACE("device %p, idx %u.\n", device, idx); | |
| return wined3d_device_get_pipeline_unordered_access_view(device, WINED3D_PIPELINE_GRAPHICS, idx); | |
| } | |
| /* Context activation is done by the caller. */ | |
| #define copy_and_next(dest, src, size) memcpy(dest, src, size); dest += (size) | |
| static HRESULT process_vertices_strided(const struct wined3d_device *device, DWORD dwDestIndex, DWORD dwCount, | |
| const struct wined3d_stream_info *stream_info, struct wined3d_buffer *dest, DWORD flags, | |
| DWORD DestFVF) | |
| { | |
| struct wined3d_matrix mat, proj_mat, view_mat, world_mat; | |
| struct wined3d_map_desc map_desc; | |
| struct wined3d_box box = {0}; | |
| struct wined3d_viewport vp; | |
| UINT vertex_size; | |
| unsigned int i; | |
| BYTE *dest_ptr; | |
| BOOL doClip; | |
| DWORD numTextures; | |
| HRESULT hr; | |
| if (stream_info->use_map & (1u << WINED3D_FFP_NORMAL)) | |
| { | |
| WARN(" lighting state not saved yet... Some strange stuff may happen !\n"); | |
| } | |
| if (!(stream_info->use_map & (1u << WINED3D_FFP_POSITION))) | |
| { | |
| ERR("Source has no position mask\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (device->state.render_states[WINED3D_RS_CLIPPING]) | |
| { | |
| static BOOL warned = FALSE; | |
| /* | |
| * The clipping code is not quite correct. Some things need | |
| * to be checked against IDirect3DDevice3 (!), d3d8 and d3d9, | |
| * so disable clipping for now. | |
| * (The graphics in Half-Life are broken, and my processvertices | |
| * test crashes with IDirect3DDevice3) | |
| doClip = TRUE; | |
| */ | |
| doClip = FALSE; | |
| if(!warned) { | |
| warned = TRUE; | |
| FIXME("Clipping is broken and disabled for now\n"); | |
| } | |
| } | |
| else | |
| doClip = FALSE; | |
| vertex_size = get_flexible_vertex_size(DestFVF); | |
| box.left = dwDestIndex * vertex_size; | |
| box.right = box.left + dwCount * vertex_size; | |
| if (FAILED(hr = wined3d_resource_map(&dest->resource, 0, &map_desc, &box, 0))) | |
| { | |
| WARN("Failed to map buffer, hr %#x.\n", hr); | |
| return hr; | |
| } | |
| dest_ptr = map_desc.data; | |
| wined3d_device_get_transform(device, WINED3D_TS_VIEW, &view_mat); | |
| wined3d_device_get_transform(device, WINED3D_TS_PROJECTION, &proj_mat); | |
| wined3d_device_get_transform(device, WINED3D_TS_WORLD_MATRIX(0), &world_mat); | |
| TRACE("View mat:\n"); | |
| TRACE("%.8e %.8e %.8e %.8e\n", view_mat._11, view_mat._12, view_mat._13, view_mat._14); | |
| TRACE("%.8e %.8e %.8e %.8e\n", view_mat._21, view_mat._22, view_mat._23, view_mat._24); | |
| TRACE("%.8e %.8e %.8e %.8e\n", view_mat._31, view_mat._32, view_mat._33, view_mat._34); | |
| TRACE("%.8e %.8e %.8e %.8e\n", view_mat._41, view_mat._42, view_mat._43, view_mat._44); | |
| TRACE("Proj mat:\n"); | |
| TRACE("%.8e %.8e %.8e %.8e\n", proj_mat._11, proj_mat._12, proj_mat._13, proj_mat._14); | |
| TRACE("%.8e %.8e %.8e %.8e\n", proj_mat._21, proj_mat._22, proj_mat._23, proj_mat._24); | |
| TRACE("%.8e %.8e %.8e %.8e\n", proj_mat._31, proj_mat._32, proj_mat._33, proj_mat._34); | |
| TRACE("%.8e %.8e %.8e %.8e\n", proj_mat._41, proj_mat._42, proj_mat._43, proj_mat._44); | |
| TRACE("World mat:\n"); | |
| TRACE("%.8e %.8e %.8e %.8e\n", world_mat._11, world_mat._12, world_mat._13, world_mat._14); | |
| TRACE("%.8e %.8e %.8e %.8e\n", world_mat._21, world_mat._22, world_mat._23, world_mat._24); | |
| TRACE("%.8e %.8e %.8e %.8e\n", world_mat._31, world_mat._32, world_mat._33, world_mat._34); | |
| TRACE("%.8e %.8e %.8e %.8e\n", world_mat._41, world_mat._42, world_mat._43, world_mat._44); | |
| /* Get the viewport */ | |
| wined3d_device_get_viewport(device, &vp); | |
| TRACE("viewport x %.8e, y %.8e, width %.8e, height %.8e, min_z %.8e, max_z %.8e.\n", | |
| vp.x, vp.y, vp.width, vp.height, vp.min_z, vp.max_z); | |
| multiply_matrix(&mat,&view_mat,&world_mat); | |
| multiply_matrix(&mat,&proj_mat,&mat); | |
| numTextures = (DestFVF & WINED3DFVF_TEXCOUNT_MASK) >> WINED3DFVF_TEXCOUNT_SHIFT; | |
| for (i = 0; i < dwCount; i+= 1) { | |
| unsigned int tex_index; | |
| if ( ((DestFVF & WINED3DFVF_POSITION_MASK) == WINED3DFVF_XYZ ) || | |
| ((DestFVF & WINED3DFVF_POSITION_MASK) == WINED3DFVF_XYZRHW ) ) { | |
| /* The position first */ | |
| const struct wined3d_stream_info_element *element = &stream_info->elements[WINED3D_FFP_POSITION]; | |
| const float *p = (const float *)(element->data.addr + i * element->stride); | |
| float x, y, z, rhw; | |
| TRACE("In: ( %06.2f %06.2f %06.2f )\n", p[0], p[1], p[2]); | |
| /* Multiplication with world, view and projection matrix. */ | |
| x = (p[0] * mat._11) + (p[1] * mat._21) + (p[2] * mat._31) + mat._41; | |
| y = (p[0] * mat._12) + (p[1] * mat._22) + (p[2] * mat._32) + mat._42; | |
| z = (p[0] * mat._13) + (p[1] * mat._23) + (p[2] * mat._33) + mat._43; | |
| rhw = (p[0] * mat._14) + (p[1] * mat._24) + (p[2] * mat._34) + mat._44; | |
| TRACE("x=%f y=%f z=%f rhw=%f\n", x, y, z, rhw); | |
| /* WARNING: The following things are taken from d3d7 and were not yet checked | |
| * against d3d8 or d3d9! | |
| */ | |
| /* Clipping conditions: From msdn | |
| * | |
| * A vertex is clipped if it does not match the following requirements | |
| * -rhw < x <= rhw | |
| * -rhw < y <= rhw | |
| * 0 < z <= rhw | |
| * 0 < rhw ( Not in d3d7, but tested in d3d7) | |
| * | |
| * If clipping is on is determined by the D3DVOP_CLIP flag in D3D7, and | |
| * by the D3DRS_CLIPPING in D3D9(according to the msdn, not checked) | |
| * | |
| */ | |
| if( !doClip || | |
| ( (-rhw -eps < x) && (-rhw -eps < y) && ( -eps < z) && | |
| (x <= rhw + eps) && (y <= rhw + eps ) && (z <= rhw + eps) && | |
| ( rhw > eps ) ) ) { | |
| /* "Normal" viewport transformation (not clipped) | |
| * 1) The values are divided by rhw | |
| * 2) The y axis is negative, so multiply it with -1 | |
| * 3) Screen coordinates go from -(Width/2) to +(Width/2) and | |
| * -(Height/2) to +(Height/2). The z range is MinZ to MaxZ | |
| * 4) Multiply x with Width/2 and add Width/2 | |
| * 5) The same for the height | |
| * 6) Add the viewpoint X and Y to the 2D coordinates and | |
| * The minimum Z value to z | |
| * 7) rhw = 1 / rhw Reciprocal of Homogeneous W.... | |
| * | |
| * Well, basically it's simply a linear transformation into viewport | |
| * coordinates | |
| */ | |
| x /= rhw; | |
| y /= rhw; | |
| z /= rhw; | |
| y *= -1; | |
| x *= vp.width / 2; | |
| y *= vp.height / 2; | |
| z *= vp.max_z - vp.min_z; | |
| x += vp.width / 2 + vp.x; | |
| y += vp.height / 2 + vp.y; | |
| z += vp.min_z; | |
| rhw = 1 / rhw; | |
| } else { | |
| /* That vertex got clipped | |
| * Contrary to OpenGL it is not dropped completely, it just | |
| * undergoes a different calculation. | |
| */ | |
| TRACE("Vertex got clipped\n"); | |
| x += rhw; | |
| y += rhw; | |
| x /= 2; | |
| y /= 2; | |
| /* Msdn mentions that Direct3D9 keeps a list of clipped vertices | |
| * outside of the main vertex buffer memory. That needs some more | |
| * investigation... | |
| */ | |
| } | |
| TRACE("Writing (%f %f %f) %f\n", x, y, z, rhw); | |
| ( (float *) dest_ptr)[0] = x; | |
| ( (float *) dest_ptr)[1] = y; | |
| ( (float *) dest_ptr)[2] = z; | |
| ( (float *) dest_ptr)[3] = rhw; /* SIC, see ddraw test! */ | |
| dest_ptr += 3 * sizeof(float); | |
| if ((DestFVF & WINED3DFVF_POSITION_MASK) == WINED3DFVF_XYZRHW) | |
| dest_ptr += sizeof(float); | |
| } | |
| if (DestFVF & WINED3DFVF_PSIZE) | |
| dest_ptr += sizeof(DWORD); | |
| if (DestFVF & WINED3DFVF_NORMAL) | |
| { | |
| const struct wined3d_stream_info_element *element = &stream_info->elements[WINED3D_FFP_NORMAL]; | |
| const float *normal = (const float *)(element->data.addr + i * element->stride); | |
| /* AFAIK this should go into the lighting information */ | |
| FIXME("Didn't expect the destination to have a normal\n"); | |
| copy_and_next(dest_ptr, normal, 3 * sizeof(float)); | |
| } | |
| if (DestFVF & WINED3DFVF_DIFFUSE) | |
| { | |
| const struct wined3d_stream_info_element *element = &stream_info->elements[WINED3D_FFP_DIFFUSE]; | |
| const DWORD *color_d = (const DWORD *)(element->data.addr + i * element->stride); | |
| if (!(stream_info->use_map & (1u << WINED3D_FFP_DIFFUSE))) | |
| { | |
| static BOOL warned = FALSE; | |
| if(!warned) { | |
| ERR("No diffuse color in source, but destination has one\n"); | |
| warned = TRUE; | |
| } | |
| *( (DWORD *) dest_ptr) = 0xffffffff; | |
| dest_ptr += sizeof(DWORD); | |
| } | |
| else | |
| { | |
| copy_and_next(dest_ptr, color_d, sizeof(DWORD)); | |
| } | |
| } | |
| if (DestFVF & WINED3DFVF_SPECULAR) | |
| { | |
| /* What's the color value in the feedback buffer? */ | |
| const struct wined3d_stream_info_element *element = &stream_info->elements[WINED3D_FFP_SPECULAR]; | |
| const DWORD *color_s = (const DWORD *)(element->data.addr + i * element->stride); | |
| if (!(stream_info->use_map & (1u << WINED3D_FFP_SPECULAR))) | |
| { | |
| static BOOL warned = FALSE; | |
| if(!warned) { | |
| ERR("No specular color in source, but destination has one\n"); | |
| warned = TRUE; | |
| } | |
| *(DWORD *)dest_ptr = 0xff000000; | |
| dest_ptr += sizeof(DWORD); | |
| } | |
| else | |
| { | |
| copy_and_next(dest_ptr, color_s, sizeof(DWORD)); | |
| } | |
| } | |
| for (tex_index = 0; tex_index < numTextures; ++tex_index) | |
| { | |
| const struct wined3d_stream_info_element *element = &stream_info->elements[WINED3D_FFP_TEXCOORD0 + tex_index]; | |
| const float *tex_coord = (const float *)(element->data.addr + i * element->stride); | |
| if (!(stream_info->use_map & (1u << (WINED3D_FFP_TEXCOORD0 + tex_index)))) | |
| { | |
| ERR("No source texture, but destination requests one\n"); | |
| dest_ptr += GET_TEXCOORD_SIZE_FROM_FVF(DestFVF, tex_index) * sizeof(float); | |
| } | |
| else | |
| { | |
| copy_and_next(dest_ptr, tex_coord, GET_TEXCOORD_SIZE_FROM_FVF(DestFVF, tex_index) * sizeof(float)); | |
| } | |
| } | |
| } | |
| wined3d_resource_unmap(&dest->resource, 0); | |
| return WINED3D_OK; | |
| } | |
| #undef copy_and_next | |
| HRESULT CDECL wined3d_device_process_vertices(struct wined3d_device *device, | |
| UINT src_start_idx, UINT dst_idx, UINT vertex_count, struct wined3d_buffer *dst_buffer, | |
| const struct wined3d_vertex_declaration *declaration, DWORD flags, DWORD dst_fvf) | |
| { | |
| struct wined3d_state *state = &device->state; | |
| struct wined3d_stream_info stream_info; | |
| struct wined3d_resource *resource; | |
| struct wined3d_box box = {0}; | |
| struct wined3d_shader *vs; | |
| unsigned int i; | |
| HRESULT hr; | |
| WORD map; | |
| TRACE("device %p, src_start_idx %u, dst_idx %u, vertex_count %u, " | |
| "dst_buffer %p, declaration %p, flags %#x, dst_fvf %#x.\n", | |
| device, src_start_idx, dst_idx, vertex_count, | |
| dst_buffer, declaration, flags, dst_fvf); | |
| if (declaration) | |
| FIXME("Output vertex declaration not implemented yet.\n"); | |
| vs = state->shader[WINED3D_SHADER_TYPE_VERTEX]; | |
| state->shader[WINED3D_SHADER_TYPE_VERTEX] = NULL; | |
| wined3d_stream_info_from_declaration(&stream_info, state, &device->adapter->gl_info, &device->adapter->d3d_info); | |
| state->shader[WINED3D_SHADER_TYPE_VERTEX] = vs; | |
| /* We can't convert FROM a VBO, and vertex buffers used to source into | |
| * process_vertices() are unlikely to ever be used for drawing. Release | |
| * VBOs in those buffers and fix up the stream_info structure. | |
| * | |
| * Also apply the start index. */ | |
| for (i = 0, map = stream_info.use_map; map; map >>= 1, ++i) | |
| { | |
| struct wined3d_stream_info_element *e; | |
| struct wined3d_map_desc map_desc; | |
| if (!(map & 1)) | |
| continue; | |
| e = &stream_info.elements[i]; | |
| resource = &state->streams[e->stream_idx].buffer->resource; | |
| box.left = src_start_idx * e->stride; | |
| box.right = box.left + vertex_count * e->stride; | |
| if (FAILED(wined3d_resource_map(resource, 0, &map_desc, &box, WINED3D_MAP_READONLY))) | |
| ERR("Failed to map resource.\n"); | |
| e->data.buffer_object = 0; | |
| e->data.addr += (ULONG_PTR)map_desc.data; | |
| } | |
| hr = process_vertices_strided(device, dst_idx, vertex_count, | |
| &stream_info, dst_buffer, flags, dst_fvf); | |
| for (i = 0, map = stream_info.use_map; map; map >>= 1, ++i) | |
| { | |
| if (!(map & 1)) | |
| continue; | |
| resource = &state->streams[stream_info.elements[i].stream_idx].buffer->resource; | |
| if (FAILED(wined3d_resource_unmap(resource, 0))) | |
| ERR("Failed to unmap resource.\n"); | |
| } | |
| return hr; | |
| } | |
| void CDECL wined3d_device_set_texture_stage_state(struct wined3d_device *device, | |
| UINT stage, enum wined3d_texture_stage_state state, DWORD value) | |
| { | |
| const struct wined3d_d3d_info *d3d_info = &device->adapter->d3d_info; | |
| DWORD old_value; | |
| TRACE("device %p, stage %u, state %s, value %#x.\n", | |
| device, stage, debug_d3dtexturestate(state), value); | |
| if (state > WINED3D_HIGHEST_TEXTURE_STATE) | |
| { | |
| WARN("Invalid state %#x passed.\n", state); | |
| return; | |
| } | |
| if (stage >= d3d_info->limits.ffp_blend_stages) | |
| { | |
| WARN("Attempting to set stage %u which is higher than the max stage %u, ignoring.\n", | |
| stage, d3d_info->limits.ffp_blend_stages - 1); | |
| return; | |
| } | |
| old_value = device->update_state->texture_states[stage][state]; | |
| device->update_state->texture_states[stage][state] = value; | |
| if (device->recording) | |
| { | |
| TRACE("Recording... not performing anything.\n"); | |
| device->recording->changed.textureState[stage] |= 1u << state; | |
| return; | |
| } | |
| /* Checked after the assignments to allow proper stateblock recording. */ | |
| if (old_value == value) | |
| { | |
| TRACE("Application is setting the old value over, nothing to do.\n"); | |
| return; | |
| } | |
| wined3d_cs_emit_set_texture_state(device->cs, stage, state, value); | |
| } | |
| DWORD CDECL wined3d_device_get_texture_stage_state(const struct wined3d_device *device, | |
| UINT stage, enum wined3d_texture_stage_state state) | |
| { | |
| TRACE("device %p, stage %u, state %s.\n", | |
| device, stage, debug_d3dtexturestate(state)); | |
| if (state > WINED3D_HIGHEST_TEXTURE_STATE) | |
| { | |
| WARN("Invalid state %#x passed.\n", state); | |
| return 0; | |
| } | |
| return device->state.texture_states[stage][state]; | |
| } | |
| HRESULT CDECL wined3d_device_set_texture(struct wined3d_device *device, | |
| UINT stage, struct wined3d_texture *texture) | |
| { | |
| struct wined3d_texture *prev; | |
| TRACE("device %p, stage %u, texture %p.\n", device, stage, texture); | |
| if (stage >= WINED3DVERTEXTEXTURESAMPLER0 && stage <= WINED3DVERTEXTEXTURESAMPLER3) | |
| stage -= (WINED3DVERTEXTEXTURESAMPLER0 - MAX_FRAGMENT_SAMPLERS); | |
| /* Windows accepts overflowing this array... we do not. */ | |
| if (stage >= sizeof(device->state.textures) / sizeof(*device->state.textures)) | |
| { | |
| WARN("Ignoring invalid stage %u.\n", stage); | |
| return WINED3D_OK; | |
| } | |
| if (texture && texture->resource.pool == WINED3D_POOL_SCRATCH) | |
| { | |
| WARN("Rejecting attempt to set scratch texture.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (device->recording) | |
| device->recording->changed.textures |= 1u << stage; | |
| prev = device->update_state->textures[stage]; | |
| TRACE("Previous texture %p.\n", prev); | |
| if (texture == prev) | |
| { | |
| TRACE("App is setting the same texture again, nothing to do.\n"); | |
| return WINED3D_OK; | |
| } | |
| TRACE("Setting new texture to %p.\n", texture); | |
| device->update_state->textures[stage] = texture; | |
| if (texture) | |
| wined3d_texture_incref(texture); | |
| if (!device->recording) | |
| wined3d_cs_emit_set_texture(device->cs, stage, texture); | |
| if (prev) | |
| wined3d_texture_decref(prev); | |
| return WINED3D_OK; | |
| } | |
| struct wined3d_texture * CDECL wined3d_device_get_texture(const struct wined3d_device *device, UINT stage) | |
| { | |
| TRACE("device %p, stage %u.\n", device, stage); | |
| if (stage >= WINED3DVERTEXTEXTURESAMPLER0 && stage <= WINED3DVERTEXTEXTURESAMPLER3) | |
| stage -= (WINED3DVERTEXTEXTURESAMPLER0 - MAX_FRAGMENT_SAMPLERS); | |
| if (stage >= sizeof(device->state.textures) / sizeof(*device->state.textures)) | |
| { | |
| WARN("Ignoring invalid stage %u.\n", stage); | |
| return NULL; /* Windows accepts overflowing this array ... we do not. */ | |
| } | |
| return device->state.textures[stage]; | |
| } | |
| HRESULT CDECL wined3d_device_get_device_caps(const struct wined3d_device *device, WINED3DCAPS *caps) | |
| { | |
| TRACE("device %p, caps %p.\n", device, caps); | |
| return wined3d_get_device_caps(device->wined3d, device->adapter->ordinal, | |
| device->create_parms.device_type, caps); | |
| } | |
| HRESULT CDECL wined3d_device_get_display_mode(const struct wined3d_device *device, UINT swapchain_idx, | |
| struct wined3d_display_mode *mode, enum wined3d_display_rotation *rotation) | |
| { | |
| struct wined3d_swapchain *swapchain; | |
| TRACE("device %p, swapchain_idx %u, mode %p, rotation %p.\n", | |
| device, swapchain_idx, mode, rotation); | |
| if (!(swapchain = wined3d_device_get_swapchain(device, swapchain_idx))) | |
| return WINED3DERR_INVALIDCALL; | |
| return wined3d_swapchain_get_display_mode(swapchain, mode, rotation); | |
| } | |
| HRESULT CDECL wined3d_device_begin_stateblock(struct wined3d_device *device) | |
| { | |
| struct wined3d_stateblock *stateblock; | |
| HRESULT hr; | |
| TRACE("device %p.\n", device); | |
| if (device->recording) | |
| return WINED3DERR_INVALIDCALL; | |
| hr = wined3d_stateblock_create(device, WINED3D_SBT_RECORDED, &stateblock); | |
| if (FAILED(hr)) | |
| return hr; | |
| device->recording = stateblock; | |
| device->update_state = &stateblock->state; | |
| TRACE("Recording stateblock %p.\n", stateblock); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_end_stateblock(struct wined3d_device *device, | |
| struct wined3d_stateblock **stateblock) | |
| { | |
| struct wined3d_stateblock *object = device->recording; | |
| TRACE("device %p, stateblock %p.\n", device, stateblock); | |
| if (!device->recording) | |
| { | |
| WARN("Not recording.\n"); | |
| *stateblock = NULL; | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| stateblock_init_contained_states(object); | |
| *stateblock = object; | |
| device->recording = NULL; | |
| device->update_state = &device->state; | |
| TRACE("Returning stateblock %p.\n", *stateblock); | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_begin_scene(struct wined3d_device *device) | |
| { | |
| /* At the moment we have no need for any functionality at the beginning | |
| * of a scene. */ | |
| TRACE("device %p.\n", device); | |
| if (device->inScene) | |
| { | |
| WARN("Already in scene, returning WINED3DERR_INVALIDCALL.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| device->inScene = TRUE; | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_end_scene(struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| if (!device->inScene) | |
| { | |
| WARN("Not in scene, returning WINED3DERR_INVALIDCALL.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| wined3d_cs_emit_flush(device->cs); | |
| device->inScene = FALSE; | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_clear(struct wined3d_device *device, DWORD rect_count, | |
| const RECT *rects, DWORD flags, const struct wined3d_color *color, float depth, DWORD stencil) | |
| { | |
| TRACE("device %p, rect_count %u, rects %p, flags %#x, color %s, depth %.8e, stencil %u.\n", | |
| device, rect_count, rects, flags, debug_color(color), depth, stencil); | |
| if (!rect_count && rects) | |
| { | |
| WARN("Rects is %p, but rect_count is 0, ignoring clear\n", rects); | |
| return WINED3D_OK; | |
| } | |
| if (flags & (WINED3DCLEAR_ZBUFFER | WINED3DCLEAR_STENCIL)) | |
| { | |
| struct wined3d_rendertarget_view *ds = device->fb.depth_stencil; | |
| if (!ds) | |
| { | |
| WARN("Clearing depth and/or stencil without a depth stencil buffer attached, returning WINED3DERR_INVALIDCALL\n"); | |
| /* TODO: What about depth stencil buffers without stencil bits? */ | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| else if (flags & WINED3DCLEAR_TARGET) | |
| { | |
| if (ds->width < device->fb.render_targets[0]->width | |
| || ds->height < device->fb.render_targets[0]->height) | |
| { | |
| WARN("Silently ignoring depth and target clear with mismatching sizes\n"); | |
| return WINED3D_OK; | |
| } | |
| } | |
| } | |
| wined3d_cs_emit_clear(device->cs, rect_count, rects, flags, color, depth, stencil); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_set_predication(struct wined3d_device *device, | |
| struct wined3d_query *predicate, BOOL value) | |
| { | |
| struct wined3d_query *prev; | |
| TRACE("device %p, predicate %p, value %#x.\n", device, predicate, value); | |
| prev = device->update_state->predicate; | |
| if (predicate) | |
| { | |
| FIXME("Predicated rendering not implemented.\n"); | |
| wined3d_query_incref(predicate); | |
| } | |
| device->update_state->predicate = predicate; | |
| device->update_state->predicate_value = value; | |
| if (!device->recording) | |
| wined3d_cs_emit_set_predication(device->cs, predicate, value); | |
| if (prev) | |
| wined3d_query_decref(prev); | |
| } | |
| struct wined3d_query * CDECL wined3d_device_get_predication(struct wined3d_device *device, BOOL *value) | |
| { | |
| TRACE("device %p, value %p.\n", device, value); | |
| if (value) | |
| *value = device->state.predicate_value; | |
| return device->state.predicate; | |
| } | |
| void CDECL wined3d_device_dispatch_compute(struct wined3d_device *device, | |
| unsigned int group_count_x, unsigned int group_count_y, unsigned int group_count_z) | |
| { | |
| TRACE("device %p, group_count_x %u, group_count_y %u, group_count_z %u.\n", | |
| device, group_count_x, group_count_y, group_count_z); | |
| wined3d_cs_emit_dispatch(device->cs, group_count_x, group_count_y, group_count_z); | |
| } | |
| void CDECL wined3d_device_dispatch_compute_indirect(struct wined3d_device *device, | |
| struct wined3d_buffer *buffer, unsigned int offset) | |
| { | |
| TRACE("device %p, buffer %p, offset %u.\n", device, buffer, offset); | |
| wined3d_cs_emit_dispatch_indirect(device->cs, buffer, offset); | |
| } | |
| void CDECL wined3d_device_set_primitive_type(struct wined3d_device *device, | |
| enum wined3d_primitive_type primitive_type, unsigned int patch_vertex_count) | |
| { | |
| TRACE("device %p, primitive_type %s, patch_vertex_count %u.\n", | |
| device, debug_d3dprimitivetype(primitive_type), patch_vertex_count); | |
| device->state.gl_primitive_type = gl_primitive_type_from_d3d(primitive_type); | |
| device->state.gl_patch_vertices = patch_vertex_count; | |
| } | |
| void CDECL wined3d_device_get_primitive_type(const struct wined3d_device *device, | |
| enum wined3d_primitive_type *primitive_type, unsigned int *patch_vertex_count) | |
| { | |
| TRACE("device %p, primitive_type %p, patch_vertex_count %p.\n", | |
| device, primitive_type, patch_vertex_count); | |
| *primitive_type = d3d_primitive_type_from_gl(device->state.gl_primitive_type); | |
| if (patch_vertex_count) | |
| *patch_vertex_count = device->state.gl_patch_vertices; | |
| TRACE("Returning %s.\n", debug_d3dprimitivetype(*primitive_type)); | |
| } | |
| HRESULT CDECL wined3d_device_draw_primitive(struct wined3d_device *device, UINT start_vertex, UINT vertex_count) | |
| { | |
| TRACE("device %p, start_vertex %u, vertex_count %u.\n", device, start_vertex, vertex_count); | |
| wined3d_cs_emit_draw(device->cs, device->state.gl_primitive_type, device->state.gl_patch_vertices, | |
| 0, start_vertex, vertex_count, 0, 0, FALSE); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_draw_primitive_instanced(struct wined3d_device *device, | |
| UINT start_vertex, UINT vertex_count, UINT start_instance, UINT instance_count) | |
| { | |
| TRACE("device %p, start_vertex %u, vertex_count %u, start_instance %u, instance_count %u.\n", | |
| device, start_vertex, vertex_count, start_instance, instance_count); | |
| wined3d_cs_emit_draw(device->cs, device->state.gl_primitive_type, device->state.gl_patch_vertices, | |
| 0, start_vertex, vertex_count, start_instance, instance_count, FALSE); | |
| } | |
| HRESULT CDECL wined3d_device_draw_indexed_primitive(struct wined3d_device *device, UINT start_idx, UINT index_count) | |
| { | |
| TRACE("device %p, start_idx %u, index_count %u.\n", device, start_idx, index_count); | |
| if (!device->state.index_buffer) | |
| { | |
| /* D3D9 returns D3DERR_INVALIDCALL when DrawIndexedPrimitive is called | |
| * without an index buffer set. (The first time at least...) | |
| * D3D8 simply dies, but I doubt it can do much harm to return | |
| * D3DERR_INVALIDCALL there as well. */ | |
| WARN("Called without a valid index buffer set, returning WINED3DERR_INVALIDCALL.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| wined3d_cs_emit_draw(device->cs, device->state.gl_primitive_type, device->state.gl_patch_vertices, | |
| device->state.base_vertex_index, start_idx, index_count, 0, 0, TRUE); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_draw_indexed_primitive_instanced(struct wined3d_device *device, | |
| UINT start_idx, UINT index_count, UINT start_instance, UINT instance_count) | |
| { | |
| TRACE("device %p, start_idx %u, index_count %u, start_instance %u, instance_count %u.\n", | |
| device, start_idx, index_count, start_instance, instance_count); | |
| wined3d_cs_emit_draw(device->cs, device->state.gl_primitive_type, device->state.gl_patch_vertices, | |
| device->state.base_vertex_index, start_idx, index_count, start_instance, instance_count, TRUE); | |
| } | |
| HRESULT CDECL wined3d_device_update_texture(struct wined3d_device *device, | |
| struct wined3d_texture *src_texture, struct wined3d_texture *dst_texture) | |
| { | |
| unsigned int src_size, dst_size, src_skip_levels = 0; | |
| unsigned int src_level_count, dst_level_count; | |
| unsigned int layer_count, level_count, i, j; | |
| unsigned int width, height, depth; | |
| enum wined3d_resource_type type; | |
| struct wined3d_box box; | |
| TRACE("device %p, src_texture %p, dst_texture %p.\n", device, src_texture, dst_texture); | |
| /* Verify that the source and destination textures are non-NULL. */ | |
| if (!src_texture || !dst_texture) | |
| { | |
| WARN("Source and destination textures must be non-NULL, returning WINED3DERR_INVALIDCALL.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (src_texture->resource.pool != WINED3D_POOL_SYSTEM_MEM) | |
| { | |
| WARN("Source texture not in WINED3D_POOL_SYSTEM_MEM, returning WINED3DERR_INVALIDCALL.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (dst_texture->resource.pool != WINED3D_POOL_DEFAULT) | |
| { | |
| WARN("Destination texture not in WINED3D_POOL_DEFAULT, returning WINED3DERR_INVALIDCALL.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| /* Verify that the source and destination textures are the same type. */ | |
| type = src_texture->resource.type; | |
| if (dst_texture->resource.type != type) | |
| { | |
| WARN("Source and destination have different types, returning WINED3DERR_INVALIDCALL.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| layer_count = src_texture->layer_count; | |
| if (layer_count != dst_texture->layer_count) | |
| { | |
| WARN("Source and destination have different layer counts.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (src_texture->resource.format != dst_texture->resource.format) | |
| { | |
| WARN("Source and destination formats do not match.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| src_level_count = src_texture->level_count; | |
| dst_level_count = dst_texture->level_count; | |
| level_count = min(src_level_count, dst_level_count); | |
| src_size = max(src_texture->resource.width, src_texture->resource.height); | |
| dst_size = max(dst_texture->resource.width, dst_texture->resource.height); | |
| if (type == WINED3D_RTYPE_TEXTURE_3D) | |
| { | |
| src_size = max(src_size, src_texture->resource.depth); | |
| dst_size = max(dst_size, dst_texture->resource.depth); | |
| } | |
| while (src_size > dst_size) | |
| { | |
| src_size >>= 1; | |
| ++src_skip_levels; | |
| } | |
| if (wined3d_texture_get_level_width(src_texture, src_skip_levels) != dst_texture->resource.width | |
| || wined3d_texture_get_level_height(src_texture, src_skip_levels) != dst_texture->resource.height | |
| || wined3d_texture_get_level_depth(src_texture, src_skip_levels) != dst_texture->resource.depth) | |
| { | |
| WARN("Source and destination dimensions do not match.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| /* Update every surface level of the texture. */ | |
| for (i = 0; i < level_count; ++i) | |
| { | |
| width = wined3d_texture_get_level_width(dst_texture, i); | |
| height = wined3d_texture_get_level_height(dst_texture, i); | |
| depth = wined3d_texture_get_level_depth(dst_texture, i); | |
| wined3d_box_set(&box, 0, 0, width, height, 0, depth); | |
| for (j = 0; j < layer_count; ++j) | |
| { | |
| wined3d_cs_emit_blt_sub_resource(device->cs, | |
| &dst_texture->resource, j * dst_level_count + i, &box, | |
| &src_texture->resource, j * src_level_count + i + src_skip_levels, &box, | |
| 0, NULL, WINED3D_TEXF_POINT); | |
| } | |
| } | |
| return WINED3D_OK; | |
| } | |
| HRESULT CDECL wined3d_device_validate_device(const struct wined3d_device *device, DWORD *num_passes) | |
| { | |
| const struct wined3d_state *state = &device->state; | |
| struct wined3d_texture *texture; | |
| DWORD i; | |
| TRACE("device %p, num_passes %p.\n", device, num_passes); | |
| for (i = 0; i < MAX_COMBINED_SAMPLERS; ++i) | |
| { | |
| if (state->sampler_states[i][WINED3D_SAMP_MIN_FILTER] == WINED3D_TEXF_NONE) | |
| { | |
| WARN("Sampler state %u has minfilter D3DTEXF_NONE, returning D3DERR_UNSUPPORTEDTEXTUREFILTER\n", i); | |
| return WINED3DERR_UNSUPPORTEDTEXTUREFILTER; | |
| } | |
| if (state->sampler_states[i][WINED3D_SAMP_MAG_FILTER] == WINED3D_TEXF_NONE) | |
| { | |
| WARN("Sampler state %u has magfilter D3DTEXF_NONE, returning D3DERR_UNSUPPORTEDTEXTUREFILTER\n", i); | |
| return WINED3DERR_UNSUPPORTEDTEXTUREFILTER; | |
| } | |
| texture = state->textures[i]; | |
| if (!texture || texture->resource.format_flags & WINED3DFMT_FLAG_FILTERING) continue; | |
| if (state->sampler_states[i][WINED3D_SAMP_MAG_FILTER] != WINED3D_TEXF_POINT) | |
| { | |
| WARN("Non-filterable texture and mag filter enabled on sampler %u, returning E_FAIL\n", i); | |
| return E_FAIL; | |
| } | |
| if (state->sampler_states[i][WINED3D_SAMP_MIN_FILTER] != WINED3D_TEXF_POINT) | |
| { | |
| WARN("Non-filterable texture and min filter enabled on sampler %u, returning E_FAIL\n", i); | |
| return E_FAIL; | |
| } | |
| if (state->sampler_states[i][WINED3D_SAMP_MIP_FILTER] != WINED3D_TEXF_NONE | |
| && state->sampler_states[i][WINED3D_SAMP_MIP_FILTER] != WINED3D_TEXF_POINT) | |
| { | |
| WARN("Non-filterable texture and mip filter enabled on sampler %u, returning E_FAIL\n", i); | |
| return E_FAIL; | |
| } | |
| } | |
| if (state->render_states[WINED3D_RS_ZENABLE] || state->render_states[WINED3D_RS_ZWRITEENABLE] | |
| || state->render_states[WINED3D_RS_STENCILENABLE]) | |
| { | |
| struct wined3d_rendertarget_view *rt = device->fb.render_targets[0]; | |
| struct wined3d_rendertarget_view *ds = device->fb.depth_stencil; | |
| if (ds && rt && (ds->width < rt->width || ds->height < rt->height)) | |
| { | |
| WARN("Depth stencil is smaller than the color buffer, returning D3DERR_CONFLICTINGRENDERSTATE\n"); | |
| return WINED3DERR_CONFLICTINGRENDERSTATE; | |
| } | |
| } | |
| /* return a sensible default */ | |
| *num_passes = 1; | |
| TRACE("returning D3D_OK\n"); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_set_software_vertex_processing(struct wined3d_device *device, BOOL software) | |
| { | |
| static BOOL warned; | |
| TRACE("device %p, software %#x.\n", device, software); | |
| if (!warned) | |
| { | |
| FIXME("device %p, software %#x stub!\n", device, software); | |
| warned = TRUE; | |
| } | |
| device->softwareVertexProcessing = software; | |
| } | |
| BOOL CDECL wined3d_device_get_software_vertex_processing(const struct wined3d_device *device) | |
| { | |
| static BOOL warned; | |
| TRACE("device %p.\n", device); | |
| if (!warned) | |
| { | |
| TRACE("device %p stub!\n", device); | |
| warned = TRUE; | |
| } | |
| return device->softwareVertexProcessing; | |
| } | |
| HRESULT CDECL wined3d_device_get_raster_status(const struct wined3d_device *device, | |
| UINT swapchain_idx, struct wined3d_raster_status *raster_status) | |
| { | |
| struct wined3d_swapchain *swapchain; | |
| TRACE("device %p, swapchain_idx %u, raster_status %p.\n", | |
| device, swapchain_idx, raster_status); | |
| if (!(swapchain = wined3d_device_get_swapchain(device, swapchain_idx))) | |
| return WINED3DERR_INVALIDCALL; | |
| return wined3d_swapchain_get_raster_status(swapchain, raster_status); | |
| } | |
| HRESULT CDECL wined3d_device_set_npatch_mode(struct wined3d_device *device, float segments) | |
| { | |
| static BOOL warned; | |
| TRACE("device %p, segments %.8e.\n", device, segments); | |
| if (segments != 0.0f) | |
| { | |
| if (!warned) | |
| { | |
| FIXME("device %p, segments %.8e stub!\n", device, segments); | |
| warned = TRUE; | |
| } | |
| } | |
| return WINED3D_OK; | |
| } | |
| float CDECL wined3d_device_get_npatch_mode(const struct wined3d_device *device) | |
| { | |
| static BOOL warned; | |
| TRACE("device %p.\n", device); | |
| if (!warned) | |
| { | |
| FIXME("device %p stub!\n", device); | |
| warned = TRUE; | |
| } | |
| return 0.0f; | |
| } | |
| void CDECL wined3d_device_copy_uav_counter(struct wined3d_device *device, | |
| struct wined3d_buffer *dst_buffer, unsigned int offset, struct wined3d_unordered_access_view *uav) | |
| { | |
| TRACE("device %p, dst_buffer %p, offset %u, uav %p.\n", | |
| device, dst_buffer, offset, uav); | |
| wined3d_cs_emit_copy_uav_counter(device->cs, dst_buffer, offset, uav); | |
| } | |
| void CDECL wined3d_device_copy_resource(struct wined3d_device *device, | |
| struct wined3d_resource *dst_resource, struct wined3d_resource *src_resource) | |
| { | |
| struct wined3d_texture *dst_texture, *src_texture; | |
| struct wined3d_box box; | |
| unsigned int i, j; | |
| TRACE("device %p, dst_resource %p, src_resource %p.\n", device, dst_resource, src_resource); | |
| if (src_resource == dst_resource) | |
| { | |
| WARN("Source and destination are the same resource.\n"); | |
| return; | |
| } | |
| if (src_resource->type != dst_resource->type) | |
| { | |
| WARN("Resource types (%s / %s) don't match.\n", | |
| debug_d3dresourcetype(dst_resource->type), | |
| debug_d3dresourcetype(src_resource->type)); | |
| return; | |
| } | |
| if (src_resource->width != dst_resource->width | |
| || src_resource->height != dst_resource->height | |
| || src_resource->depth != dst_resource->depth) | |
| { | |
| WARN("Resource dimensions (%ux%ux%u / %ux%ux%u) don't match.\n", | |
| dst_resource->width, dst_resource->height, dst_resource->depth, | |
| src_resource->width, src_resource->height, src_resource->depth); | |
| return; | |
| } | |
| if (src_resource->format->id != dst_resource->format->id) | |
| { | |
| WARN("Resource formats (%s / %s) don't match.\n", | |
| debug_d3dformat(dst_resource->format->id), | |
| debug_d3dformat(src_resource->format->id)); | |
| return; | |
| } | |
| if (dst_resource->type == WINED3D_RTYPE_BUFFER) | |
| { | |
| wined3d_box_set(&box, 0, 0, src_resource->size, 1, 0, 1); | |
| wined3d_cs_emit_blt_sub_resource(device->cs, dst_resource, 0, &box, | |
| src_resource, 0, &box, 0, NULL, WINED3D_TEXF_POINT); | |
| return; | |
| } | |
| dst_texture = texture_from_resource(dst_resource); | |
| src_texture = texture_from_resource(src_resource); | |
| if (src_texture->layer_count != dst_texture->layer_count | |
| || src_texture->level_count != dst_texture->level_count) | |
| { | |
| WARN("Subresource layouts (%ux%u / %ux%u) don't match.\n", | |
| dst_texture->layer_count, dst_texture->level_count, | |
| src_texture->layer_count, src_texture->level_count); | |
| return; | |
| } | |
| for (i = 0; i < dst_texture->level_count; ++i) | |
| { | |
| wined3d_box_set(&box, 0, 0, | |
| wined3d_texture_get_level_width(dst_texture, i), | |
| wined3d_texture_get_level_height(dst_texture, i), | |
| 0, wined3d_texture_get_level_depth(dst_texture, i)); | |
| for (j = 0; j < dst_texture->layer_count; ++j) | |
| { | |
| unsigned int idx = j * dst_texture->level_count + i; | |
| wined3d_cs_emit_blt_sub_resource(device->cs, dst_resource, idx, &box, | |
| src_resource, idx, &box, 0, NULL, WINED3D_TEXF_POINT); | |
| } | |
| } | |
| } | |
| HRESULT CDECL wined3d_device_copy_sub_resource_region(struct wined3d_device *device, | |
| struct wined3d_resource *dst_resource, unsigned int dst_sub_resource_idx, unsigned int dst_x, | |
| unsigned int dst_y, unsigned int dst_z, struct wined3d_resource *src_resource, | |
| unsigned int src_sub_resource_idx, const struct wined3d_box *src_box) | |
| { | |
| struct wined3d_box dst_box, b; | |
| TRACE("device %p, dst_resource %p, dst_sub_resource_idx %u, dst_x %u, dst_y %u, dst_z %u, " | |
| "src_resource %p, src_sub_resource_idx %u, src_box %s.\n", | |
| device, dst_resource, dst_sub_resource_idx, dst_x, dst_y, dst_z, | |
| src_resource, src_sub_resource_idx, debug_box(src_box)); | |
| if (src_resource == dst_resource && src_sub_resource_idx == dst_sub_resource_idx) | |
| { | |
| WARN("Source and destination are the same sub-resource.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (src_resource->type != dst_resource->type) | |
| { | |
| WARN("Resource types (%s / %s) don't match.\n", | |
| debug_d3dresourcetype(dst_resource->type), | |
| debug_d3dresourcetype(src_resource->type)); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (src_resource->format->id != dst_resource->format->id) | |
| { | |
| WARN("Resource formats (%s / %s) don't match.\n", | |
| debug_d3dformat(dst_resource->format->id), | |
| debug_d3dformat(src_resource->format->id)); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (dst_resource->type == WINED3D_RTYPE_BUFFER) | |
| { | |
| if (dst_sub_resource_idx) | |
| { | |
| WARN("Invalid dst_sub_resource_idx %u.\n", dst_sub_resource_idx); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (src_sub_resource_idx) | |
| { | |
| WARN("Invalid src_sub_resource_idx %u.\n", src_sub_resource_idx); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (!src_box) | |
| { | |
| wined3d_box_set(&b, 0, 0, src_resource->size, 1, 0, 1); | |
| src_box = &b; | |
| } | |
| else if ((src_box->left >= src_box->right | |
| || src_box->top >= src_box->bottom | |
| || src_box->front >= src_box->back)) | |
| { | |
| WARN("Invalid box %s specified.\n", debug_box(src_box)); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (src_box->right > src_resource->size || dst_x >= dst_resource->size | |
| || src_box->right - src_box->left > dst_resource->size - dst_x) | |
| { | |
| WARN("Invalid range specified, dst_offset %u, src_offset %u, size %u.\n", | |
| dst_x, src_box->left, src_box->right - src_box->left); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| wined3d_box_set(&dst_box, dst_x, 0, dst_x + (src_box->right - src_box->left), 1, 0, 1); | |
| } | |
| else if (dst_resource->type == WINED3D_RTYPE_TEXTURE_2D) | |
| { | |
| struct wined3d_texture *dst_texture = texture_from_resource(dst_resource); | |
| struct wined3d_texture *src_texture = texture_from_resource(src_resource); | |
| unsigned int src_level = src_sub_resource_idx % src_texture->level_count; | |
| if (dst_sub_resource_idx >= dst_texture->level_count * dst_texture->layer_count) | |
| { | |
| WARN("Invalid destination sub-resource %u.\n", dst_sub_resource_idx); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (src_sub_resource_idx >= src_texture->level_count * src_texture->layer_count) | |
| { | |
| WARN("Invalid source sub-resource %u.\n", src_sub_resource_idx); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (dst_texture->sub_resources[dst_sub_resource_idx].map_count) | |
| { | |
| WARN("Destination sub-resource %u is mapped.\n", dst_sub_resource_idx); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (src_texture->sub_resources[src_sub_resource_idx].map_count) | |
| { | |
| WARN("Source sub-resource %u is mapped.\n", src_sub_resource_idx); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (!src_box) | |
| { | |
| wined3d_box_set(&b, 0, 0, wined3d_texture_get_level_width(src_texture, src_level), | |
| wined3d_texture_get_level_height(src_texture, src_level), 0, 1); | |
| src_box = &b; | |
| } | |
| else if (FAILED(wined3d_texture_check_box_dimensions(src_texture, src_level, src_box))) | |
| { | |
| WARN("Invalid source box %s.\n", debug_box(src_box)); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| wined3d_box_set(&dst_box, dst_x, dst_y, dst_x + (src_box->right - src_box->left), | |
| dst_y + (src_box->bottom - src_box->top), 0, 1); | |
| if (FAILED(wined3d_texture_check_box_dimensions(dst_texture, | |
| dst_sub_resource_idx % dst_texture->level_count, &dst_box))) | |
| { | |
| WARN("Invalid destination box %s.\n", debug_box(&dst_box)); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| } | |
| else | |
| { | |
| FIXME("Not implemented for %s resources.\n", debug_d3dresourcetype(dst_resource->type)); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| wined3d_cs_emit_blt_sub_resource(device->cs, dst_resource, dst_sub_resource_idx, &dst_box, | |
| src_resource, src_sub_resource_idx, src_box, 0, NULL, WINED3D_TEXF_POINT); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_update_sub_resource(struct wined3d_device *device, struct wined3d_resource *resource, | |
| unsigned int sub_resource_idx, const struct wined3d_box *box, const void *data, unsigned int row_pitch, | |
| unsigned int depth_pitch) | |
| { | |
| unsigned int width, height, depth; | |
| struct wined3d_box b; | |
| TRACE("device %p, resource %p, sub_resource_idx %u, box %s, data %p, row_pitch %u, depth_pitch %u.\n", | |
| device, resource, sub_resource_idx, debug_box(box), data, row_pitch, depth_pitch); | |
| if (resource->type == WINED3D_RTYPE_BUFFER) | |
| { | |
| if (sub_resource_idx > 0) | |
| { | |
| WARN("Invalid sub_resource_idx %u.\n", sub_resource_idx); | |
| return; | |
| } | |
| width = resource->size; | |
| height = 1; | |
| depth = 1; | |
| } | |
| else if (resource->type == WINED3D_RTYPE_TEXTURE_2D || resource->type == WINED3D_RTYPE_TEXTURE_3D) | |
| { | |
| struct wined3d_texture *texture = texture_from_resource(resource); | |
| unsigned int level; | |
| if (sub_resource_idx >= texture->level_count * texture->layer_count) | |
| { | |
| WARN("Invalid sub_resource_idx %u.\n", sub_resource_idx); | |
| return; | |
| } | |
| level = sub_resource_idx % texture->level_count; | |
| width = wined3d_texture_get_level_width(texture, level); | |
| height = wined3d_texture_get_level_height(texture, level); | |
| depth = wined3d_texture_get_level_depth(texture, level); | |
| } | |
| else | |
| { | |
| FIXME("Not implemented for %s resources.\n", debug_d3dresourcetype(resource->type)); | |
| return; | |
| } | |
| if (!box) | |
| { | |
| wined3d_box_set(&b, 0, 0, width, height, 0, depth); | |
| box = &b; | |
| } | |
| else if (box->left >= box->right || box->right > width | |
| || box->top >= box->bottom || box->bottom > height | |
| || box->front >= box->back || box->back > depth) | |
| { | |
| WARN("Invalid box %s specified.\n", debug_box(box)); | |
| return; | |
| } | |
| wined3d_resource_wait_idle(resource); | |
| wined3d_cs_emit_update_sub_resource(device->cs, resource, sub_resource_idx, box, data, row_pitch, depth_pitch); | |
| } | |
| HRESULT CDECL wined3d_device_clear_rendertarget_view(struct wined3d_device *device, | |
| struct wined3d_rendertarget_view *view, const RECT *rect, DWORD flags, | |
| const struct wined3d_color *color, float depth, DWORD stencil) | |
| { | |
| struct wined3d_resource *resource; | |
| RECT r; | |
| TRACE("device %p, view %p, rect %s, flags %#x, color %s, depth %.8e, stencil %u.\n", | |
| device, view, wine_dbgstr_rect(rect), flags, debug_color(color), depth, stencil); | |
| if (!flags) | |
| return WINED3D_OK; | |
| resource = view->resource; | |
| if (resource->type != WINED3D_RTYPE_TEXTURE_2D) | |
| { | |
| FIXME("Not implemented for %s resources.\n", debug_d3dresourcetype(resource->type)); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (view->layer_count > 1) | |
| { | |
| FIXME("Layered clears not implemented.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (!rect) | |
| { | |
| SetRect(&r, 0, 0, view->width, view->height); | |
| rect = &r; | |
| } | |
| else | |
| { | |
| struct wined3d_box b = {rect->left, rect->top, rect->right, rect->bottom, 0, 1}; | |
| struct wined3d_texture *texture = texture_from_resource(view->resource); | |
| HRESULT hr; | |
| if (FAILED(hr = wined3d_texture_check_box_dimensions(texture, | |
| view->sub_resource_idx % texture->level_count, &b))) | |
| return hr; | |
| } | |
| wined3d_cs_emit_clear_rendertarget_view(device->cs, view, rect, flags, color, depth, stencil); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_clear_unordered_access_view_uint(struct wined3d_device *device, | |
| struct wined3d_unordered_access_view *view, const struct wined3d_uvec4 *clear_value) | |
| { | |
| TRACE("device %p, view %p, clear_value %s.\n", device, view, debug_uvec4(clear_value)); | |
| wined3d_cs_emit_clear_unordered_access_view_uint(device->cs, view, clear_value); | |
| } | |
| struct wined3d_rendertarget_view * CDECL wined3d_device_get_rendertarget_view(const struct wined3d_device *device, | |
| unsigned int view_idx) | |
| { | |
| TRACE("device %p, view_idx %u.\n", device, view_idx); | |
| if (view_idx >= device->adapter->gl_info.limits.buffers) | |
| { | |
| WARN("Only %u render targets are supported.\n", device->adapter->gl_info.limits.buffers); | |
| return NULL; | |
| } | |
| return device->fb.render_targets[view_idx]; | |
| } | |
| struct wined3d_rendertarget_view * CDECL wined3d_device_get_depth_stencil_view(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->fb.depth_stencil; | |
| } | |
| HRESULT CDECL wined3d_device_set_rendertarget_view(struct wined3d_device *device, | |
| unsigned int view_idx, struct wined3d_rendertarget_view *view, BOOL set_viewport) | |
| { | |
| struct wined3d_rendertarget_view *prev; | |
| TRACE("device %p, view_idx %u, view %p, set_viewport %#x.\n", | |
| device, view_idx, view, set_viewport); | |
| if (view_idx >= device->adapter->gl_info.limits.buffers) | |
| { | |
| WARN("Only %u render targets are supported.\n", device->adapter->gl_info.limits.buffers); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (view && !(view->resource->usage & WINED3DUSAGE_RENDERTARGET)) | |
| { | |
| WARN("View resource %p doesn't have render target usage.\n", view->resource); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| /* Set the viewport and scissor rectangles, if requested. Tests show that | |
| * stateblock recording is ignored, the change goes directly into the | |
| * primary stateblock. */ | |
| if (!view_idx && set_viewport) | |
| { | |
| struct wined3d_state *state = &device->state; | |
| state->viewport.x = 0; | |
| state->viewport.y = 0; | |
| state->viewport.width = view->width; | |
| state->viewport.height = view->height; | |
| state->viewport.min_z = 0.0f; | |
| state->viewport.max_z = 1.0f; | |
| wined3d_cs_emit_set_viewport(device->cs, &state->viewport); | |
| SetRect(&state->scissor_rect, 0, 0, view->width, view->height); | |
| wined3d_cs_emit_set_scissor_rect(device->cs, &state->scissor_rect); | |
| } | |
| prev = device->fb.render_targets[view_idx]; | |
| if (view == prev) | |
| return WINED3D_OK; | |
| if (view) | |
| wined3d_rendertarget_view_incref(view); | |
| device->fb.render_targets[view_idx] = view; | |
| wined3d_cs_emit_set_rendertarget_view(device->cs, view_idx, view); | |
| /* Release after the assignment, to prevent device_resource_released() | |
| * from seeing the surface as still in use. */ | |
| if (prev) | |
| wined3d_rendertarget_view_decref(prev); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_set_depth_stencil_view(struct wined3d_device *device, struct wined3d_rendertarget_view *view) | |
| { | |
| struct wined3d_rendertarget_view *prev; | |
| TRACE("device %p, view %p.\n", device, view); | |
| prev = device->fb.depth_stencil; | |
| if (prev == view) | |
| { | |
| TRACE("Trying to do a NOP SetRenderTarget operation.\n"); | |
| return; | |
| } | |
| if ((device->fb.depth_stencil = view)) | |
| wined3d_rendertarget_view_incref(view); | |
| wined3d_cs_emit_set_depth_stencil_view(device->cs, view); | |
| if (prev) | |
| wined3d_rendertarget_view_decref(prev); | |
| } | |
| static struct wined3d_texture *wined3d_device_create_cursor_texture(struct wined3d_device *device, | |
| struct wined3d_texture *cursor_image, unsigned int sub_resource_idx) | |
| { | |
| unsigned int texture_level = sub_resource_idx % cursor_image->level_count; | |
| struct wined3d_sub_resource_data data; | |
| struct wined3d_resource_desc desc; | |
| struct wined3d_map_desc map_desc; | |
| struct wined3d_texture *texture; | |
| HRESULT hr; | |
| if (FAILED(wined3d_resource_map(&cursor_image->resource, sub_resource_idx, &map_desc, NULL, WINED3D_MAP_READONLY))) | |
| { | |
| ERR("Failed to map source texture.\n"); | |
| return NULL; | |
| } | |
| data.data = map_desc.data; | |
| data.row_pitch = map_desc.row_pitch; | |
| data.slice_pitch = map_desc.slice_pitch; | |
| desc.resource_type = WINED3D_RTYPE_TEXTURE_2D; | |
| desc.format = WINED3DFMT_B8G8R8A8_UNORM; | |
| desc.multisample_type = WINED3D_MULTISAMPLE_NONE; | |
| desc.multisample_quality = 0; | |
| desc.usage = WINED3DUSAGE_DYNAMIC; | |
| desc.pool = WINED3D_POOL_DEFAULT; | |
| desc.width = wined3d_texture_get_level_width(cursor_image, texture_level); | |
| desc.height = wined3d_texture_get_level_height(cursor_image, texture_level); | |
| desc.depth = 1; | |
| desc.size = 0; | |
| hr = wined3d_texture_create(device, &desc, 1, 1, WINED3D_TEXTURE_CREATE_MAPPABLE, | |
| &data, NULL, &wined3d_null_parent_ops, &texture); | |
| wined3d_resource_unmap(&cursor_image->resource, sub_resource_idx); | |
| if (FAILED(hr)) | |
| { | |
| ERR("Failed to create cursor texture.\n"); | |
| return NULL; | |
| } | |
| return texture; | |
| } | |
| HRESULT CDECL wined3d_device_set_cursor_properties(struct wined3d_device *device, | |
| UINT x_hotspot, UINT y_hotspot, struct wined3d_texture *texture, unsigned int sub_resource_idx) | |
| { | |
| unsigned int texture_level = sub_resource_idx % texture->level_count; | |
| unsigned int cursor_width, cursor_height; | |
| struct wined3d_display_mode mode; | |
| struct wined3d_map_desc map_desc; | |
| HRESULT hr; | |
| TRACE("device %p, x_hotspot %u, y_hotspot %u, texture %p, sub_resource_idx %u.\n", | |
| device, x_hotspot, y_hotspot, texture, sub_resource_idx); | |
| if (sub_resource_idx >= texture->level_count * texture->layer_count | |
| || texture->resource.type != WINED3D_RTYPE_TEXTURE_2D) | |
| return WINED3DERR_INVALIDCALL; | |
| if (device->cursor_texture) | |
| { | |
| wined3d_texture_decref(device->cursor_texture); | |
| device->cursor_texture = NULL; | |
| } | |
| if (texture->resource.format->id != WINED3DFMT_B8G8R8A8_UNORM) | |
| { | |
| WARN("Texture %p has invalid format %s.\n", | |
| texture, debug_d3dformat(texture->resource.format->id)); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (FAILED(hr = wined3d_get_adapter_display_mode(device->wined3d, device->adapter->ordinal, &mode, NULL))) | |
| { | |
| ERR("Failed to get display mode, hr %#x.\n", hr); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| cursor_width = wined3d_texture_get_level_width(texture, texture_level); | |
| cursor_height = wined3d_texture_get_level_height(texture, texture_level); | |
| if (cursor_width > mode.width || cursor_height > mode.height) | |
| { | |
| WARN("Texture %p, sub-resource %u dimensions are %ux%u, but screen dimensions are %ux%u.\n", | |
| texture, sub_resource_idx, cursor_width, cursor_height, mode.width, mode.height); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| /* TODO: MSDN: Cursor sizes must be a power of 2 */ | |
| /* Do not store the surface's pointer because the application may | |
| * release it after setting the cursor image. Windows doesn't | |
| * addref the set surface, so we can't do this either without | |
| * creating circular refcount dependencies. */ | |
| if (!(device->cursor_texture = wined3d_device_create_cursor_texture(device, texture, sub_resource_idx))) | |
| { | |
| ERR("Failed to create cursor texture.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (cursor_width == 32 && cursor_height == 32) | |
| { | |
| UINT mask_size = cursor_width * cursor_height / 8; | |
| ICONINFO cursor_info; | |
| DWORD *mask_bits; | |
| HCURSOR cursor; | |
| /* 32-bit user32 cursors ignore the alpha channel if it's all | |
| * zeroes, and use the mask instead. Fill the mask with all ones | |
| * to ensure we still get a fully transparent cursor. */ | |
| if (!(mask_bits = HeapAlloc(GetProcessHeap(), 0, mask_size))) | |
| return E_OUTOFMEMORY; | |
| memset(mask_bits, 0xff, mask_size); | |
| wined3d_resource_map(&texture->resource, sub_resource_idx, &map_desc, NULL, | |
| WINED3D_MAP_NO_DIRTY_UPDATE | WINED3D_MAP_READONLY); | |
| cursor_info.fIcon = FALSE; | |
| cursor_info.xHotspot = x_hotspot; | |
| cursor_info.yHotspot = y_hotspot; | |
| cursor_info.hbmMask = CreateBitmap(cursor_width, cursor_height, 1, 1, mask_bits); | |
| cursor_info.hbmColor = CreateBitmap(cursor_width, cursor_height, 1, 32, map_desc.data); | |
| wined3d_resource_unmap(&texture->resource, sub_resource_idx); | |
| /* Create our cursor and clean up. */ | |
| cursor = CreateIconIndirect(&cursor_info); | |
| if (cursor_info.hbmMask) | |
| DeleteObject(cursor_info.hbmMask); | |
| if (cursor_info.hbmColor) | |
| DeleteObject(cursor_info.hbmColor); | |
| if (device->hardwareCursor) | |
| DestroyCursor(device->hardwareCursor); | |
| device->hardwareCursor = cursor; | |
| if (device->bCursorVisible) | |
| SetCursor(cursor); | |
| HeapFree(GetProcessHeap(), 0, mask_bits); | |
| } | |
| TRACE("New cursor dimensions are %ux%u.\n", cursor_width, cursor_height); | |
| device->cursorWidth = cursor_width; | |
| device->cursorHeight = cursor_height; | |
| device->xHotSpot = x_hotspot; | |
| device->yHotSpot = y_hotspot; | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_set_cursor_position(struct wined3d_device *device, | |
| int x_screen_space, int y_screen_space, DWORD flags) | |
| { | |
| TRACE("device %p, x %d, y %d, flags %#x.\n", | |
| device, x_screen_space, y_screen_space, flags); | |
| device->xScreenSpace = x_screen_space; | |
| device->yScreenSpace = y_screen_space; | |
| if (device->hardwareCursor) | |
| { | |
| POINT pt; | |
| GetCursorPos( &pt ); | |
| if (x_screen_space == pt.x && y_screen_space == pt.y) | |
| return; | |
| SetCursorPos( x_screen_space, y_screen_space ); | |
| /* Switch to the software cursor if position diverges from the hardware one. */ | |
| GetCursorPos( &pt ); | |
| if (x_screen_space != pt.x || y_screen_space != pt.y) | |
| { | |
| if (device->bCursorVisible) SetCursor( NULL ); | |
| DestroyCursor( device->hardwareCursor ); | |
| device->hardwareCursor = 0; | |
| } | |
| } | |
| } | |
| BOOL CDECL wined3d_device_show_cursor(struct wined3d_device *device, BOOL show) | |
| { | |
| BOOL oldVisible = device->bCursorVisible; | |
| TRACE("device %p, show %#x.\n", device, show); | |
| /* | |
| * When ShowCursor is first called it should make the cursor appear at the OS's last | |
| * known cursor position. | |
| */ | |
| if (show && !oldVisible) | |
| { | |
| POINT pt; | |
| GetCursorPos(&pt); | |
| device->xScreenSpace = pt.x; | |
| device->yScreenSpace = pt.y; | |
| } | |
| if (device->hardwareCursor) | |
| { | |
| device->bCursorVisible = show; | |
| if (show) | |
| SetCursor(device->hardwareCursor); | |
| else | |
| SetCursor(NULL); | |
| } | |
| else if (device->cursor_texture) | |
| { | |
| device->bCursorVisible = show; | |
| } | |
| return oldVisible; | |
| } | |
| void CDECL wined3d_device_evict_managed_resources(struct wined3d_device *device) | |
| { | |
| struct wined3d_resource *resource, *cursor; | |
| TRACE("device %p.\n", device); | |
| LIST_FOR_EACH_ENTRY_SAFE(resource, cursor, &device->resources, struct wined3d_resource, resource_list_entry) | |
| { | |
| TRACE("Checking resource %p for eviction.\n", resource); | |
| if (resource->pool == WINED3D_POOL_MANAGED && !resource->map_count) | |
| { | |
| TRACE("Evicting %p.\n", resource); | |
| wined3d_cs_emit_unload_resource(device->cs, resource); | |
| } | |
| } | |
| } | |
| HRESULT CDECL wined3d_device_reset(struct wined3d_device *device, | |
| const struct wined3d_swapchain_desc *swapchain_desc, const struct wined3d_display_mode *mode, | |
| wined3d_device_reset_cb callback, BOOL reset_state) | |
| { | |
| struct wined3d_resource *resource, *cursor; | |
| struct wined3d_swapchain *swapchain; | |
| struct wined3d_view_desc view_desc; | |
| BOOL backbuffer_resized; | |
| HRESULT hr = WINED3D_OK; | |
| unsigned int i; | |
| TRACE("device %p, swapchain_desc %p, mode %p, callback %p, reset_state %#x.\n", | |
| device, swapchain_desc, mode, callback, reset_state); | |
| device->cs->ops->finish(device->cs, WINED3D_CS_QUEUE_DEFAULT); | |
| if (!(swapchain = wined3d_device_get_swapchain(device, 0))) | |
| { | |
| ERR("Failed to get the first implicit swapchain.\n"); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| if (reset_state) | |
| { | |
| if (device->logo_texture) | |
| { | |
| wined3d_texture_decref(device->logo_texture); | |
| device->logo_texture = NULL; | |
| } | |
| if (device->cursor_texture) | |
| { | |
| wined3d_texture_decref(device->cursor_texture); | |
| device->cursor_texture = NULL; | |
| } | |
| state_unbind_resources(&device->state); | |
| } | |
| if (device->fb.render_targets) | |
| { | |
| for (i = 0; i < device->adapter->gl_info.limits.buffers; ++i) | |
| { | |
| wined3d_device_set_rendertarget_view(device, i, NULL, FALSE); | |
| } | |
| } | |
| wined3d_device_set_depth_stencil_view(device, NULL); | |
| if (reset_state) | |
| { | |
| LIST_FOR_EACH_ENTRY_SAFE(resource, cursor, &device->resources, struct wined3d_resource, resource_list_entry) | |
| { | |
| TRACE("Enumerating resource %p.\n", resource); | |
| if (FAILED(hr = callback(resource))) | |
| return hr; | |
| } | |
| } | |
| TRACE("New params:\n"); | |
| TRACE("backbuffer_width %u\n", swapchain_desc->backbuffer_width); | |
| TRACE("backbuffer_height %u\n", swapchain_desc->backbuffer_height); | |
| TRACE("backbuffer_format %s\n", debug_d3dformat(swapchain_desc->backbuffer_format)); | |
| TRACE("backbuffer_count %u\n", swapchain_desc->backbuffer_count); | |
| TRACE("multisample_type %#x\n", swapchain_desc->multisample_type); | |
| TRACE("multisample_quality %u\n", swapchain_desc->multisample_quality); | |
| TRACE("swap_effect %#x\n", swapchain_desc->swap_effect); | |
| TRACE("device_window %p\n", swapchain_desc->device_window); | |
| TRACE("windowed %#x\n", swapchain_desc->windowed); | |
| TRACE("enable_auto_depth_stencil %#x\n", swapchain_desc->enable_auto_depth_stencil); | |
| if (swapchain_desc->enable_auto_depth_stencil) | |
| TRACE("auto_depth_stencil_format %s\n", debug_d3dformat(swapchain_desc->auto_depth_stencil_format)); | |
| TRACE("flags %#x\n", swapchain_desc->flags); | |
| TRACE("refresh_rate %u\n", swapchain_desc->refresh_rate); | |
| TRACE("swap_interval %u\n", swapchain_desc->swap_interval); | |
| TRACE("auto_restore_display_mode %#x\n", swapchain_desc->auto_restore_display_mode); | |
| /* No special treatment of these parameters. Just store them */ | |
| swapchain->desc.swap_effect = swapchain_desc->swap_effect; | |
| swapchain->desc.enable_auto_depth_stencil = swapchain_desc->enable_auto_depth_stencil; | |
| swapchain->desc.auto_depth_stencil_format = swapchain_desc->auto_depth_stencil_format; | |
| swapchain->desc.flags = swapchain_desc->flags; | |
| swapchain->desc.refresh_rate = swapchain_desc->refresh_rate; | |
| swapchain->desc.swap_interval = swapchain_desc->swap_interval; | |
| swapchain->desc.auto_restore_display_mode = swapchain_desc->auto_restore_display_mode; | |
| if (swapchain_desc->device_window | |
| && swapchain_desc->device_window != swapchain->desc.device_window) | |
| { | |
| TRACE("Changing the device window from %p to %p.\n", | |
| swapchain->desc.device_window, swapchain_desc->device_window); | |
| swapchain->desc.device_window = swapchain_desc->device_window; | |
| swapchain->device_window = swapchain_desc->device_window; | |
| wined3d_swapchain_set_window(swapchain, NULL); | |
| } | |
| backbuffer_resized = swapchain_desc->backbuffer_width != swapchain->desc.backbuffer_width | |
| || swapchain_desc->backbuffer_height != swapchain->desc.backbuffer_height; | |
| if (!swapchain_desc->windowed != !swapchain->desc.windowed | |
| || swapchain->reapply_mode || mode | |
| || (!swapchain_desc->windowed && backbuffer_resized)) | |
| { | |
| if (FAILED(hr = wined3d_swapchain_set_fullscreen(swapchain, swapchain_desc, mode))) | |
| return hr; | |
| } | |
| else if (!swapchain_desc->windowed) | |
| { | |
| DWORD style = device->style; | |
| DWORD exStyle = device->exStyle; | |
| /* If we're in fullscreen, and the mode wasn't changed, we have to get the window back into | |
| * the right position. Some applications(Battlefield 2, Guild Wars) move it and then call | |
| * Reset to clear up their mess. Guild Wars also loses the device during that. | |
| */ | |
| device->style = 0; | |
| device->exStyle = 0; | |
| wined3d_device_setup_fullscreen_window(device, swapchain->device_window, | |
| swapchain_desc->backbuffer_width, | |
| swapchain_desc->backbuffer_height); | |
| device->style = style; | |
| device->exStyle = exStyle; | |
| } | |
| if (FAILED(hr = wined3d_swapchain_resize_buffers(swapchain, swapchain_desc->backbuffer_count, | |
| swapchain_desc->backbuffer_width, swapchain_desc->backbuffer_height, swapchain_desc->backbuffer_format, | |
| swapchain_desc->multisample_type, swapchain_desc->multisample_quality))) | |
| return hr; | |
| if (device->auto_depth_stencil_view) | |
| { | |
| wined3d_rendertarget_view_decref(device->auto_depth_stencil_view); | |
| device->auto_depth_stencil_view = NULL; | |
| } | |
| if (swapchain->desc.enable_auto_depth_stencil) | |
| { | |
| struct wined3d_resource_desc texture_desc; | |
| struct wined3d_texture *texture; | |
| DWORD flags = 0; | |
| TRACE("Creating the depth stencil buffer.\n"); | |
| texture_desc.resource_type = WINED3D_RTYPE_TEXTURE_2D; | |
| texture_desc.format = swapchain->desc.auto_depth_stencil_format; | |
| texture_desc.multisample_type = swapchain->desc.multisample_type; | |
| texture_desc.multisample_quality = swapchain->desc.multisample_quality; | |
| texture_desc.usage = WINED3DUSAGE_DEPTHSTENCIL; | |
| texture_desc.pool = WINED3D_POOL_DEFAULT; | |
| texture_desc.width = swapchain->desc.backbuffer_width; | |
| texture_desc.height = swapchain->desc.backbuffer_height; | |
| texture_desc.depth = 1; | |
| texture_desc.size = 0; | |
| if (swapchain_desc->flags & WINED3D_SWAPCHAIN_GDI_COMPATIBLE) | |
| flags |= WINED3D_TEXTURE_CREATE_GET_DC; | |
| if (FAILED(hr = device->device_parent->ops->create_swapchain_texture(device->device_parent, | |
| device->device_parent, &texture_desc, flags, &texture))) | |
| { | |
| ERR("Failed to create the auto depth/stencil surface, hr %#x.\n", hr); | |
| return WINED3DERR_INVALIDCALL; | |
| } | |
| view_desc.format_id = texture->resource.format->id; | |
| view_desc.flags = 0; | |
| view_desc.u.texture.level_idx = 0; | |
| view_desc.u.texture.level_count = 1; | |
| view_desc.u.texture.layer_idx = 0; | |
| view_desc.u.texture.layer_count = 1; | |
| hr = wined3d_rendertarget_view_create(&view_desc, &texture->resource, | |
| NULL, &wined3d_null_parent_ops, &device->auto_depth_stencil_view); | |
| wined3d_texture_decref(texture); | |
| if (FAILED(hr)) | |
| { | |
| ERR("Failed to create rendertarget view, hr %#x.\n", hr); | |
| return hr; | |
| } | |
| wined3d_device_set_depth_stencil_view(device, device->auto_depth_stencil_view); | |
| } | |
| if (device->back_buffer_view) | |
| { | |
| wined3d_rendertarget_view_decref(device->back_buffer_view); | |
| device->back_buffer_view = NULL; | |
| } | |
| if (swapchain->desc.backbuffer_count) | |
| { | |
| struct wined3d_resource *back_buffer = &swapchain->back_buffers[0]->resource; | |
| view_desc.format_id = back_buffer->format->id; | |
| view_desc.flags = 0; | |
| view_desc.u.texture.level_idx = 0; | |
| view_desc.u.texture.level_count = 1; | |
| view_desc.u.texture.layer_idx = 0; | |
| view_desc.u.texture.layer_count = 1; | |
| if (FAILED(hr = wined3d_rendertarget_view_create(&view_desc, back_buffer, | |
| NULL, &wined3d_null_parent_ops, &device->back_buffer_view))) | |
| { | |
| ERR("Failed to create rendertarget view, hr %#x.\n", hr); | |
| return hr; | |
| } | |
| } | |
| wine_rb_clear(&device->samplers, device_free_sampler, NULL); | |
| if (reset_state) | |
| { | |
| TRACE("Resetting stateblock.\n"); | |
| if (device->recording) | |
| { | |
| wined3d_stateblock_decref(device->recording); | |
| device->recording = NULL; | |
| } | |
| wined3d_cs_emit_reset_state(device->cs); | |
| state_cleanup(&device->state); | |
| if (device->d3d_initialized) | |
| wined3d_device_delete_opengl_contexts(device); | |
| memset(&device->state, 0, sizeof(device->state)); | |
| state_init(&device->state, &device->fb, &device->adapter->gl_info, | |
| &device->adapter->d3d_info, WINED3D_STATE_INIT_DEFAULT); | |
| device->update_state = &device->state; | |
| device_init_swapchain_state(device, swapchain); | |
| if (wined3d_settings.logo) | |
| device_load_logo(device, wined3d_settings.logo); | |
| } | |
| else if (device->back_buffer_view) | |
| { | |
| struct wined3d_rendertarget_view *view = device->back_buffer_view; | |
| struct wined3d_state *state = &device->state; | |
| wined3d_device_set_rendertarget_view(device, 0, view, FALSE); | |
| /* Note the min_z / max_z is not reset. */ | |
| state->viewport.x = 0; | |
| state->viewport.y = 0; | |
| state->viewport.width = view->width; | |
| state->viewport.height = view->height; | |
| wined3d_cs_emit_set_viewport(device->cs, &state->viewport); | |
| SetRect(&state->scissor_rect, 0, 0, view->width, view->height); | |
| wined3d_cs_emit_set_scissor_rect(device->cs, &state->scissor_rect); | |
| } | |
| if (device->d3d_initialized) | |
| { | |
| if (reset_state) | |
| hr = wined3d_device_create_primary_opengl_context(device); | |
| swapchain_update_swap_interval(swapchain); | |
| } | |
| /* All done. There is no need to reload resources or shaders, this will happen automatically on the | |
| * first use | |
| */ | |
| return hr; | |
| } | |
| HRESULT CDECL wined3d_device_set_dialog_box_mode(struct wined3d_device *device, BOOL enable_dialogs) | |
| { | |
| TRACE("device %p, enable_dialogs %#x.\n", device, enable_dialogs); | |
| if (!enable_dialogs) FIXME("Dialogs cannot be disabled yet.\n"); | |
| return WINED3D_OK; | |
| } | |
| void CDECL wined3d_device_get_creation_parameters(const struct wined3d_device *device, | |
| struct wined3d_device_creation_parameters *parameters) | |
| { | |
| TRACE("device %p, parameters %p.\n", device, parameters); | |
| *parameters = device->create_parms; | |
| } | |
| struct wined3d * CDECL wined3d_device_get_wined3d(const struct wined3d_device *device) | |
| { | |
| TRACE("device %p.\n", device); | |
| return device->wined3d; | |
| } | |
| void CDECL wined3d_device_set_gamma_ramp(const struct wined3d_device *device, | |
| UINT swapchain_idx, DWORD flags, const struct wined3d_gamma_ramp *ramp) | |
| { | |
| struct wined3d_swapchain *swapchain; | |
| TRACE("device %p, swapchain_idx %u, flags %#x, ramp %p.\n", | |
| device, swapchain_idx, flags, ramp); | |
| if ((swapchain = wined3d_device_get_swapchain(device, swapchain_idx))) | |
| wined3d_swapchain_set_gamma_ramp(swapchain, flags, ramp); | |
| } | |
| void CDECL wined3d_device_get_gamma_ramp(const struct wined3d_device *device, | |
| UINT swapchain_idx, struct wined3d_gamma_ramp *ramp) | |
| { | |
| struct wined3d_swapchain *swapchain; | |
| TRACE("device %p, swapchain_idx %u, ramp %p.\n", | |
| device, swapchain_idx, ramp); | |
| if ((swapchain = wined3d_device_get_swapchain(device, swapchain_idx))) | |
| wined3d_swapchain_get_gamma_ramp(swapchain, ramp); | |
| } | |
| void device_resource_add(struct wined3d_device *device, struct wined3d_resource *resource) | |
| { | |
| TRACE("device %p, resource %p.\n", device, resource); | |
| wined3d_not_from_cs(device->cs); | |
| list_add_head(&device->resources, &resource->resource_list_entry); | |
| } | |
| static void device_resource_remove(struct wined3d_device *device, struct wined3d_resource *resource) | |
| { | |
| TRACE("device %p, resource %p.\n", device, resource); | |
| wined3d_not_from_cs(device->cs); | |
| list_remove(&resource->resource_list_entry); | |
| } | |
| void device_resource_released(struct wined3d_device *device, struct wined3d_resource *resource) | |
| { | |
| enum wined3d_resource_type type = resource->type; | |
| struct wined3d_rendertarget_view *rtv; | |
| unsigned int i; | |
| TRACE("device %p, resource %p, type %s.\n", device, resource, debug_d3dresourcetype(type)); | |
| if (device->d3d_initialized) | |
| { | |
| for (i = 0; i < device->adapter->gl_info.limits.buffers; ++i) | |
| { | |
| if ((rtv = device->fb.render_targets[i]) && rtv->resource == resource) | |
| ERR("Resource %p is still in use as render target %u.\n", resource, i); | |
| } | |
| if ((rtv = device->fb.depth_stencil) && rtv->resource == resource) | |
| ERR("Resource %p is still in use as depth/stencil buffer.\n", resource); | |
| } | |
| switch (type) | |
| { | |
| case WINED3D_RTYPE_TEXTURE_2D: | |
| case WINED3D_RTYPE_TEXTURE_3D: | |
| for (i = 0; i < MAX_COMBINED_SAMPLERS; ++i) | |
| { | |
| struct wined3d_texture *texture = texture_from_resource(resource); | |
| if (device->state.textures[i] == texture) | |
| { | |
| ERR("Texture %p is still in use, stage %u.\n", texture, i); | |
| device->state.textures[i] = NULL; | |
| } | |
| if (device->recording && device->update_state->textures[i] == texture) | |
| { | |
| ERR("Texture %p is still in use by recording stateblock %p, stage %u.\n", | |
| texture, device->recording, i); | |
| device->update_state->textures[i] = NULL; | |
| } | |
| } | |
| break; | |
| case WINED3D_RTYPE_BUFFER: | |
| { | |
| struct wined3d_buffer *buffer = buffer_from_resource(resource); | |
| for (i = 0; i < MAX_STREAMS; ++i) | |
| { | |
| if (device->state.streams[i].buffer == buffer) | |
| { | |
| ERR("Buffer %p is still in use, stream %u.\n", buffer, i); | |
| device->state.streams[i].buffer = NULL; | |
| } | |
| if (device->recording && device->update_state->streams[i].buffer == buffer) | |
| { | |
| ERR("Buffer %p is still in use by stateblock %p, stream %u.\n", | |
| buffer, device->recording, i); | |
| device->update_state->streams[i].buffer = NULL; | |
| } | |
| } | |
| if (device->state.index_buffer == buffer) | |
| { | |
| ERR("Buffer %p is still in use as index buffer.\n", buffer); | |
| device->state.index_buffer = NULL; | |
| } | |
| if (device->recording && device->update_state->index_buffer == buffer) | |
| { | |
| ERR("Buffer %p is still in use by stateblock %p as index buffer.\n", | |
| buffer, device->recording); | |
| device->update_state->index_buffer = NULL; | |
| } | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| /* Remove the resource from the resourceStore */ | |
| device_resource_remove(device, resource); | |
| TRACE("Resource released.\n"); | |
| } | |
| static int wined3d_sampler_compare(const void *key, const struct wine_rb_entry *entry) | |
| { | |
| const struct wined3d_sampler *sampler = WINE_RB_ENTRY_VALUE(entry, struct wined3d_sampler, entry); | |
| return memcmp(&sampler->desc, key, sizeof(sampler->desc)); | |
| } | |
| HRESULT device_init(struct wined3d_device *device, struct wined3d *wined3d, | |
| UINT adapter_idx, enum wined3d_device_type device_type, HWND focus_window, DWORD flags, | |
| BYTE surface_alignment, struct wined3d_device_parent *device_parent) | |
| { | |
| struct wined3d_adapter *adapter = &wined3d->adapters[adapter_idx]; | |
| const struct fragment_pipeline *fragment_pipeline; | |
| const struct wined3d_vertex_pipe_ops *vertex_pipeline; | |
| unsigned int i; | |
| HRESULT hr; | |
| device->ref = 1; | |
| device->wined3d = wined3d; | |
| wined3d_incref(device->wined3d); | |
| device->adapter = wined3d->adapter_count ? adapter : NULL; | |
| device->device_parent = device_parent; | |
| list_init(&device->resources); | |
| list_init(&device->shaders); | |
| device->surface_alignment = surface_alignment; | |
| /* Save the creation parameters. */ | |
| device->create_parms.adapter_idx = adapter_idx; | |
| device->create_parms.device_type = device_type; | |
| device->create_parms.focus_window = focus_window; | |
| device->create_parms.flags = flags; | |
| device->shader_backend = adapter->shader_backend; | |
| vertex_pipeline = adapter->vertex_pipe; | |
| fragment_pipeline = adapter->fragment_pipe; | |
| wine_rb_init(&device->samplers, wined3d_sampler_compare); | |
| if (vertex_pipeline->vp_states && fragment_pipeline->states | |
| && FAILED(hr = compile_state_table(device->StateTable, device->multistate_funcs, | |
| &adapter->gl_info, &adapter->d3d_info, vertex_pipeline, | |
| fragment_pipeline, misc_state_template))) | |
| { | |
| ERR("Failed to compile state table, hr %#x.\n", hr); | |
| wine_rb_destroy(&device->samplers, NULL, NULL); | |
| wined3d_decref(device->wined3d); | |
| return hr; | |
| } | |
| state_init(&device->state, &device->fb, &adapter->gl_info, | |
| &adapter->d3d_info, WINED3D_STATE_INIT_DEFAULT); | |
| device->update_state = &device->state; | |
| if (!(device->cs = wined3d_cs_create(device))) | |
| { | |
| WARN("Failed to create command stream.\n"); | |
| state_cleanup(&device->state); | |
| hr = E_FAIL; | |
| goto err; | |
| } | |
| return WINED3D_OK; | |
| err: | |
| for (i = 0; i < sizeof(device->multistate_funcs) / sizeof(device->multistate_funcs[0]); ++i) | |
| { | |
| HeapFree(GetProcessHeap(), 0, device->multistate_funcs[i]); | |
| } | |
| wine_rb_destroy(&device->samplers, NULL, NULL); | |
| wined3d_decref(device->wined3d); | |
| return hr; | |
| } | |
| void device_invalidate_state(const struct wined3d_device *device, DWORD state) | |
| { | |
| DWORD rep = device->StateTable[state].representative; | |
| struct wined3d_context *context; | |
| DWORD idx; | |
| BYTE shift; | |
| UINT i; | |
| wined3d_from_cs(device->cs); | |
| if (STATE_IS_COMPUTE(state)) | |
| { | |
| for (i = 0; i < device->context_count; ++i) | |
| context_invalidate_compute_state(device->contexts[i], state); | |
| return; | |
| } | |
| for (i = 0; i < device->context_count; ++i) | |
| { | |
| context = device->contexts[i]; | |
| if(isStateDirty(context, rep)) continue; | |
| context->dirtyArray[context->numDirtyEntries++] = rep; | |
| idx = rep / (sizeof(*context->isStateDirty) * CHAR_BIT); | |
| shift = rep & ((sizeof(*context->isStateDirty) * CHAR_BIT) - 1); | |
| context->isStateDirty[idx] |= (1u << shift); | |
| } | |
| } | |
| LRESULT device_process_message(struct wined3d_device *device, HWND window, BOOL unicode, | |
| UINT message, WPARAM wparam, LPARAM lparam, WNDPROC proc) | |
| { | |
| if (device->filter_messages && message != WM_DISPLAYCHANGE) | |
| { | |
| TRACE("Filtering message: window %p, message %#x, wparam %#lx, lparam %#lx.\n", | |
| window, message, wparam, lparam); | |
| if (unicode) | |
| return DefWindowProcW(window, message, wparam, lparam); | |
| else | |
| return DefWindowProcA(window, message, wparam, lparam); | |
| } | |
| if (message == WM_DESTROY) | |
| { | |
| TRACE("unregister window %p.\n", window); | |
| wined3d_unregister_window(window); | |
| if (InterlockedCompareExchangePointer((void **)&device->focus_window, NULL, window) != window) | |
| ERR("Window %p is not the focus window for device %p.\n", window, device); | |
| } | |
| else if (message == WM_DISPLAYCHANGE) | |
| { | |
| device->device_parent->ops->mode_changed(device->device_parent); | |
| } | |
| else if (message == WM_ACTIVATEAPP) | |
| { | |
| UINT i; | |
| for (i = 0; i < device->swapchain_count; i++) | |
| wined3d_swapchain_activate(device->swapchains[i], wparam); | |
| device->device_parent->ops->activate(device->device_parent, wparam); | |
| } | |
| else if (message == WM_SYSCOMMAND) | |
| { | |
| if (wparam == SC_RESTORE && device->wined3d->flags & WINED3D_HANDLE_RESTORE) | |
| { | |
| if (unicode) | |
| DefWindowProcW(window, message, wparam, lparam); | |
| else | |
| DefWindowProcA(window, message, wparam, lparam); | |
| } | |
| } | |
| if (unicode) | |
| return CallWindowProcW(proc, window, message, wparam, lparam); | |
| else | |
| return CallWindowProcA(proc, window, message, wparam, lparam); | |
| } |