| /* | |
| * Wininet - networking layer. Uses unix sockets or OpenSSL. | |
| * | |
| * Copyright 2002 TransGaming Technologies Inc. | |
| * | |
| * David Hammerton | |
| * | |
| * This library is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU Lesser General Public | |
| * License as published by the Free Software Foundation; either | |
| * version 2.1 of the License, or (at your option) any later version. | |
| * | |
| * This library is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * Lesser General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU Lesser General Public | |
| * License along with this library; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA | |
| */ | |
| #include "config.h" | |
| #include "wine/port.h" | |
| #define NONAMELESSUNION | |
| #if defined(__MINGW32__) || defined (_MSC_VER) | |
| #include <ws2tcpip.h> | |
| #endif | |
| #include <sys/types.h> | |
| #ifdef HAVE_POLL_H | |
| #include <poll.h> | |
| #endif | |
| #ifdef HAVE_SYS_POLL_H | |
| # include <sys/poll.h> | |
| #endif | |
| #ifdef HAVE_SYS_TIME_H | |
| # include <sys/time.h> | |
| #endif | |
| #ifdef HAVE_SYS_SOCKET_H | |
| # include <sys/socket.h> | |
| #endif | |
| #ifdef HAVE_SYS_FILIO_H | |
| # include <sys/filio.h> | |
| #endif | |
| #ifdef HAVE_UNISTD_H | |
| # include <unistd.h> | |
| #endif | |
| #ifdef HAVE_SYS_IOCTL_H | |
| # include <sys/ioctl.h> | |
| #endif | |
| #include <time.h> | |
| #ifdef HAVE_NETDB_H | |
| # include <netdb.h> | |
| #endif | |
| #ifdef HAVE_NETINET_IN_H | |
| # include <netinet/in.h> | |
| #endif | |
| #ifdef HAVE_OPENSSL_SSL_H | |
| # include <openssl/ssl.h> | |
| #undef FAR | |
| #undef DSA | |
| #endif | |
| #include <stdarg.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <stdio.h> | |
| #include <errno.h> | |
| #include "wine/library.h" | |
| #include "windef.h" | |
| #include "winbase.h" | |
| #include "wininet.h" | |
| #include "winerror.h" | |
| #include "wincrypt.h" | |
| #include "wine/debug.h" | |
| #include "internet.h" | |
| /* To avoid conflicts with the Unix socket headers. we only need it for | |
| * the error codes anyway. */ | |
| #define USE_WS_PREFIX | |
| #include "winsock2.h" | |
| #define RESPONSE_TIMEOUT 30 /* FROM internet.c */ | |
| WINE_DEFAULT_DEBUG_CHANNEL(wininet); | |
| /* FIXME!!!!!! | |
| * This should use winsock - To use winsock the functions will have to change a bit | |
| * as they are designed for unix sockets. | |
| * SSL stuff should use crypt32.dll | |
| */ | |
| #ifdef SONAME_LIBSSL | |
| #include <openssl/err.h> | |
| static CRITICAL_SECTION init_ssl_cs; | |
| static CRITICAL_SECTION_DEBUG init_ssl_cs_debug = | |
| { | |
| 0, 0, &init_ssl_cs, | |
| { &init_ssl_cs_debug.ProcessLocksList, | |
| &init_ssl_cs_debug.ProcessLocksList }, | |
| 0, 0, { (DWORD_PTR)(__FILE__ ": init_ssl_cs") } | |
| }; | |
| static CRITICAL_SECTION init_ssl_cs = { &init_ssl_cs_debug, -1, 0, 0, 0, 0 }; | |
| static void *OpenSSL_ssl_handle; | |
| static void *OpenSSL_crypto_handle; | |
| static SSL_METHOD *meth; | |
| static SSL_CTX *ctx; | |
| static int hostname_idx; | |
| static int error_idx; | |
| #define MAKE_FUNCPTR(f) static typeof(f) * p##f | |
| /* OpenSSL functions that we use */ | |
| MAKE_FUNCPTR(SSL_library_init); | |
| MAKE_FUNCPTR(SSL_load_error_strings); | |
| MAKE_FUNCPTR(SSLv23_method); | |
| MAKE_FUNCPTR(SSL_CTX_free); | |
| MAKE_FUNCPTR(SSL_CTX_new); | |
| MAKE_FUNCPTR(SSL_new); | |
| MAKE_FUNCPTR(SSL_free); | |
| MAKE_FUNCPTR(SSL_set_fd); | |
| MAKE_FUNCPTR(SSL_connect); | |
| MAKE_FUNCPTR(SSL_shutdown); | |
| MAKE_FUNCPTR(SSL_write); | |
| MAKE_FUNCPTR(SSL_read); | |
| MAKE_FUNCPTR(SSL_pending); | |
| MAKE_FUNCPTR(SSL_get_ex_new_index); | |
| MAKE_FUNCPTR(SSL_get_ex_data); | |
| MAKE_FUNCPTR(SSL_set_ex_data); | |
| MAKE_FUNCPTR(SSL_get_ex_data_X509_STORE_CTX_idx); | |
| MAKE_FUNCPTR(SSL_get_verify_result); | |
| MAKE_FUNCPTR(SSL_get_peer_certificate); | |
| MAKE_FUNCPTR(SSL_CTX_get_timeout); | |
| MAKE_FUNCPTR(SSL_CTX_set_timeout); | |
| MAKE_FUNCPTR(SSL_CTX_set_default_verify_paths); | |
| MAKE_FUNCPTR(SSL_CTX_set_verify); | |
| MAKE_FUNCPTR(X509_STORE_CTX_get_ex_data); | |
| /* OpenSSL's libcrypto functions that we use */ | |
| MAKE_FUNCPTR(BIO_new_fp); | |
| MAKE_FUNCPTR(CRYPTO_num_locks); | |
| MAKE_FUNCPTR(CRYPTO_set_id_callback); | |
| MAKE_FUNCPTR(CRYPTO_set_locking_callback); | |
| MAKE_FUNCPTR(ERR_free_strings); | |
| MAKE_FUNCPTR(ERR_get_error); | |
| MAKE_FUNCPTR(ERR_error_string); | |
| MAKE_FUNCPTR(i2d_X509); | |
| MAKE_FUNCPTR(sk_num); | |
| MAKE_FUNCPTR(sk_value); | |
| #undef MAKE_FUNCPTR | |
| static CRITICAL_SECTION *ssl_locks; | |
| static unsigned int num_ssl_locks; | |
| static unsigned long ssl_thread_id(void) | |
| { | |
| return GetCurrentThreadId(); | |
| } | |
| static void ssl_lock_callback(int mode, int type, const char *file, int line) | |
| { | |
| if (mode & CRYPTO_LOCK) | |
| EnterCriticalSection(&ssl_locks[type]); | |
| else | |
| LeaveCriticalSection(&ssl_locks[type]); | |
| } | |
| static PCCERT_CONTEXT X509_to_cert_context(X509 *cert) | |
| { | |
| unsigned char* buffer,*p; | |
| INT len; | |
| BOOL malloced = FALSE; | |
| PCCERT_CONTEXT ret; | |
| p = NULL; | |
| len = pi2d_X509(cert,&p); | |
| /* | |
| * SSL 0.9.7 and above malloc the buffer if it is null. | |
| * however earlier version do not and so we would need to alloc the buffer. | |
| * | |
| * see the i2d_X509 man page for more details. | |
| */ | |
| if (!p) | |
| { | |
| buffer = HeapAlloc(GetProcessHeap(),0,len); | |
| p = buffer; | |
| len = pi2d_X509(cert,&p); | |
| } | |
| else | |
| { | |
| buffer = p; | |
| malloced = TRUE; | |
| } | |
| ret = CertCreateCertificateContext(X509_ASN_ENCODING,buffer,len); | |
| if (malloced) | |
| free(buffer); | |
| else | |
| HeapFree(GetProcessHeap(),0,buffer); | |
| return ret; | |
| } | |
| static DWORD netconn_verify_cert(PCCERT_CONTEXT cert, HCERTSTORE store, | |
| WCHAR *server) | |
| { | |
| BOOL ret; | |
| CERT_CHAIN_PARA chainPara = { sizeof(chainPara), { 0 } }; | |
| PCCERT_CHAIN_CONTEXT chain; | |
| char oid_server_auth[] = szOID_PKIX_KP_SERVER_AUTH; | |
| char *server_auth[] = { oid_server_auth }; | |
| DWORD err = ERROR_SUCCESS; | |
| TRACE("verifying %s\n", debugstr_w(server)); | |
| chainPara.RequestedUsage.Usage.cUsageIdentifier = 1; | |
| chainPara.RequestedUsage.Usage.rgpszUsageIdentifier = server_auth; | |
| if ((ret = CertGetCertificateChain(NULL, cert, NULL, store, &chainPara, 0, | |
| NULL, &chain))) | |
| { | |
| if (chain->TrustStatus.dwErrorStatus) | |
| { | |
| if (chain->TrustStatus.dwErrorStatus & CERT_TRUST_IS_NOT_TIME_VALID) | |
| err = ERROR_INTERNET_SEC_CERT_DATE_INVALID; | |
| else if (chain->TrustStatus.dwErrorStatus & | |
| CERT_TRUST_IS_UNTRUSTED_ROOT) | |
| err = ERROR_INTERNET_INVALID_CA; | |
| else if ((chain->TrustStatus.dwErrorStatus & | |
| CERT_TRUST_IS_OFFLINE_REVOCATION) || | |
| (chain->TrustStatus.dwErrorStatus & | |
| CERT_TRUST_REVOCATION_STATUS_UNKNOWN)) | |
| err = ERROR_INTERNET_SEC_CERT_NO_REV; | |
| else if (chain->TrustStatus.dwErrorStatus & CERT_TRUST_IS_REVOKED) | |
| err = ERROR_INTERNET_SEC_CERT_REVOKED; | |
| else if (chain->TrustStatus.dwErrorStatus & | |
| CERT_TRUST_IS_NOT_VALID_FOR_USAGE) | |
| err = ERROR_INTERNET_SEC_INVALID_CERT; | |
| else | |
| err = ERROR_INTERNET_SEC_INVALID_CERT; | |
| } | |
| else | |
| { | |
| CERT_CHAIN_POLICY_PARA policyPara; | |
| SSL_EXTRA_CERT_CHAIN_POLICY_PARA sslExtraPolicyPara; | |
| CERT_CHAIN_POLICY_STATUS policyStatus; | |
| sslExtraPolicyPara.u.cbSize = sizeof(sslExtraPolicyPara); | |
| sslExtraPolicyPara.dwAuthType = AUTHTYPE_SERVER; | |
| sslExtraPolicyPara.pwszServerName = server; | |
| policyPara.cbSize = sizeof(policyPara); | |
| policyPara.dwFlags = 0; | |
| policyPara.pvExtraPolicyPara = &sslExtraPolicyPara; | |
| ret = CertVerifyCertificateChainPolicy(CERT_CHAIN_POLICY_SSL, | |
| chain, &policyPara, &policyStatus); | |
| /* Any error in the policy status indicates that the | |
| * policy couldn't be verified. | |
| */ | |
| if (ret && policyStatus.dwError) | |
| { | |
| if (policyStatus.dwError == CERT_E_CN_NO_MATCH) | |
| err = ERROR_INTERNET_SEC_CERT_CN_INVALID; | |
| else | |
| err = ERROR_INTERNET_SEC_INVALID_CERT; | |
| } | |
| } | |
| CertFreeCertificateChain(chain); | |
| } | |
| TRACE("returning %08x\n", err); | |
| return err; | |
| } | |
| static int netconn_secure_verify(int preverify_ok, X509_STORE_CTX *ctx) | |
| { | |
| SSL *ssl; | |
| WCHAR *server; | |
| BOOL ret = FALSE; | |
| ssl = pX509_STORE_CTX_get_ex_data(ctx, | |
| pSSL_get_ex_data_X509_STORE_CTX_idx()); | |
| server = pSSL_get_ex_data(ssl, hostname_idx); | |
| if (preverify_ok) | |
| { | |
| HCERTSTORE store = CertOpenStore(CERT_STORE_PROV_MEMORY, 0, 0, | |
| CERT_STORE_CREATE_NEW_FLAG, NULL); | |
| if (store) | |
| { | |
| X509 *cert; | |
| int i; | |
| PCCERT_CONTEXT endCert = NULL; | |
| ret = TRUE; | |
| for (i = 0; ret && i < psk_num((struct stack_st *)ctx->chain); i++) | |
| { | |
| PCCERT_CONTEXT context; | |
| cert = (X509 *)psk_value((struct stack_st *)ctx->chain, i); | |
| if ((context = X509_to_cert_context(cert))) | |
| { | |
| if (i == 0) | |
| ret = CertAddCertificateContextToStore(store, context, | |
| CERT_STORE_ADD_ALWAYS, &endCert); | |
| else | |
| ret = CertAddCertificateContextToStore(store, context, | |
| CERT_STORE_ADD_ALWAYS, NULL); | |
| CertFreeCertificateContext(context); | |
| } | |
| } | |
| if (!endCert) ret = FALSE; | |
| if (ret) | |
| { | |
| DWORD_PTR err = netconn_verify_cert(endCert, store, server); | |
| if (err) | |
| { | |
| pSSL_set_ex_data(ssl, error_idx, (void *)err); | |
| ret = FALSE; | |
| } | |
| } | |
| CertFreeCertificateContext(endCert); | |
| CertCloseStore(store, 0); | |
| } | |
| } | |
| return ret; | |
| } | |
| #endif | |
| DWORD NETCON_init(WININET_NETCONNECTION *connection, BOOL useSSL) | |
| { | |
| connection->useSSL = FALSE; | |
| connection->socketFD = -1; | |
| if (useSSL) | |
| { | |
| #if defined(SONAME_LIBSSL) && defined(SONAME_LIBCRYPTO) | |
| int i; | |
| TRACE("using SSL connection\n"); | |
| EnterCriticalSection(&init_ssl_cs); | |
| if (OpenSSL_ssl_handle) /* already initialized everything */ | |
| { | |
| LeaveCriticalSection(&init_ssl_cs); | |
| return ERROR_SUCCESS; | |
| } | |
| OpenSSL_ssl_handle = wine_dlopen(SONAME_LIBSSL, RTLD_NOW, NULL, 0); | |
| if (!OpenSSL_ssl_handle) | |
| { | |
| ERR("trying to use a SSL connection, but couldn't load %s. Expect trouble.\n", | |
| SONAME_LIBSSL); | |
| LeaveCriticalSection(&init_ssl_cs); | |
| return ERROR_INTERNET_SECURITY_CHANNEL_ERROR; | |
| } | |
| OpenSSL_crypto_handle = wine_dlopen(SONAME_LIBCRYPTO, RTLD_NOW, NULL, 0); | |
| if (!OpenSSL_crypto_handle) | |
| { | |
| ERR("trying to use a SSL connection, but couldn't load %s. Expect trouble.\n", | |
| SONAME_LIBCRYPTO); | |
| LeaveCriticalSection(&init_ssl_cs); | |
| return ERROR_INTERNET_SECURITY_CHANNEL_ERROR; | |
| } | |
| /* mmm nice ugly macroness */ | |
| #define DYNSSL(x) \ | |
| p##x = wine_dlsym(OpenSSL_ssl_handle, #x, NULL, 0); \ | |
| if (!p##x) \ | |
| { \ | |
| ERR("failed to load symbol %s\n", #x); \ | |
| LeaveCriticalSection(&init_ssl_cs); \ | |
| return ERROR_INTERNET_SECURITY_CHANNEL_ERROR; \ | |
| } | |
| DYNSSL(SSL_library_init); | |
| DYNSSL(SSL_load_error_strings); | |
| DYNSSL(SSLv23_method); | |
| DYNSSL(SSL_CTX_free); | |
| DYNSSL(SSL_CTX_new); | |
| DYNSSL(SSL_new); | |
| DYNSSL(SSL_free); | |
| DYNSSL(SSL_set_fd); | |
| DYNSSL(SSL_connect); | |
| DYNSSL(SSL_shutdown); | |
| DYNSSL(SSL_write); | |
| DYNSSL(SSL_read); | |
| DYNSSL(SSL_pending); | |
| DYNSSL(SSL_get_ex_new_index); | |
| DYNSSL(SSL_get_ex_data); | |
| DYNSSL(SSL_set_ex_data); | |
| DYNSSL(SSL_get_ex_data_X509_STORE_CTX_idx); | |
| DYNSSL(SSL_get_verify_result); | |
| DYNSSL(SSL_get_peer_certificate); | |
| DYNSSL(SSL_CTX_get_timeout); | |
| DYNSSL(SSL_CTX_set_timeout); | |
| DYNSSL(SSL_CTX_set_default_verify_paths); | |
| DYNSSL(SSL_CTX_set_verify); | |
| DYNSSL(X509_STORE_CTX_get_ex_data); | |
| #undef DYNSSL | |
| #define DYNCRYPTO(x) \ | |
| p##x = wine_dlsym(OpenSSL_crypto_handle, #x, NULL, 0); \ | |
| if (!p##x) \ | |
| { \ | |
| ERR("failed to load symbol %s\n", #x); \ | |
| LeaveCriticalSection(&init_ssl_cs); \ | |
| return ERROR_INTERNET_SECURITY_CHANNEL_ERROR; \ | |
| } | |
| DYNCRYPTO(BIO_new_fp); | |
| DYNCRYPTO(CRYPTO_num_locks); | |
| DYNCRYPTO(CRYPTO_set_id_callback); | |
| DYNCRYPTO(CRYPTO_set_locking_callback); | |
| DYNCRYPTO(ERR_free_strings); | |
| DYNCRYPTO(ERR_get_error); | |
| DYNCRYPTO(ERR_error_string); | |
| DYNCRYPTO(i2d_X509); | |
| DYNCRYPTO(sk_num); | |
| DYNCRYPTO(sk_value); | |
| #undef DYNCRYPTO | |
| pSSL_library_init(); | |
| pSSL_load_error_strings(); | |
| pBIO_new_fp(stderr, BIO_NOCLOSE); /* FIXME: should use winedebug stuff */ | |
| meth = pSSLv23_method(); | |
| ctx = pSSL_CTX_new(meth); | |
| if (!pSSL_CTX_set_default_verify_paths(ctx)) | |
| { | |
| ERR("SSL_CTX_set_default_verify_paths failed: %s\n", | |
| pERR_error_string(pERR_get_error(), 0)); | |
| LeaveCriticalSection(&init_ssl_cs); | |
| return ERROR_OUTOFMEMORY; | |
| } | |
| hostname_idx = pSSL_get_ex_new_index(0, (void *)"hostname index", | |
| NULL, NULL, NULL); | |
| if (hostname_idx == -1) | |
| { | |
| ERR("SSL_get_ex_new_index failed; %s\n", | |
| pERR_error_string(pERR_get_error(), 0)); | |
| LeaveCriticalSection(&init_ssl_cs); | |
| return ERROR_OUTOFMEMORY; | |
| } | |
| error_idx = pSSL_get_ex_new_index(0, (void *)"error index", | |
| NULL, NULL, NULL); | |
| if (error_idx == -1) | |
| { | |
| ERR("SSL_get_ex_new_index failed; %s\n", | |
| pERR_error_string(pERR_get_error(), 0)); | |
| LeaveCriticalSection(&init_ssl_cs); | |
| return ERROR_OUTOFMEMORY; | |
| } | |
| pSSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, netconn_secure_verify); | |
| pCRYPTO_set_id_callback(ssl_thread_id); | |
| num_ssl_locks = pCRYPTO_num_locks(); | |
| ssl_locks = HeapAlloc(GetProcessHeap(), 0, num_ssl_locks * sizeof(CRITICAL_SECTION)); | |
| if (!ssl_locks) | |
| { | |
| LeaveCriticalSection(&init_ssl_cs); | |
| return ERROR_OUTOFMEMORY; | |
| } | |
| for (i = 0; i < num_ssl_locks; i++) | |
| InitializeCriticalSection(&ssl_locks[i]); | |
| pCRYPTO_set_locking_callback(ssl_lock_callback); | |
| LeaveCriticalSection(&init_ssl_cs); | |
| #else | |
| FIXME("can't use SSL, not compiled in.\n"); | |
| return ERROR_INTERNET_SECURITY_CHANNEL_ERROR; | |
| #endif | |
| } | |
| return ERROR_SUCCESS; | |
| } | |
| void NETCON_unload(void) | |
| { | |
| #if defined(SONAME_LIBSSL) && defined(SONAME_LIBCRYPTO) | |
| if (OpenSSL_crypto_handle) | |
| { | |
| pERR_free_strings(); | |
| wine_dlclose(OpenSSL_crypto_handle, NULL, 0); | |
| } | |
| if (OpenSSL_ssl_handle) | |
| { | |
| if (ctx) | |
| pSSL_CTX_free(ctx); | |
| wine_dlclose(OpenSSL_ssl_handle, NULL, 0); | |
| } | |
| if (ssl_locks) | |
| { | |
| int i; | |
| for (i = 0; i < num_ssl_locks; i++) DeleteCriticalSection(&ssl_locks[i]); | |
| HeapFree(GetProcessHeap(), 0, ssl_locks); | |
| } | |
| #endif | |
| } | |
| BOOL NETCON_connected(WININET_NETCONNECTION *connection) | |
| { | |
| if (connection->socketFD == -1) | |
| return FALSE; | |
| else | |
| return TRUE; | |
| } | |
| /* translate a unix error code into a winsock one */ | |
| int sock_get_error( int err ) | |
| { | |
| #if !defined(__MINGW32__) && !defined (_MSC_VER) | |
| switch (err) | |
| { | |
| case EINTR: return WSAEINTR; | |
| case EBADF: return WSAEBADF; | |
| case EPERM: | |
| case EACCES: return WSAEACCES; | |
| case EFAULT: return WSAEFAULT; | |
| case EINVAL: return WSAEINVAL; | |
| case EMFILE: return WSAEMFILE; | |
| case EWOULDBLOCK: return WSAEWOULDBLOCK; | |
| case EINPROGRESS: return WSAEINPROGRESS; | |
| case EALREADY: return WSAEALREADY; | |
| case ENOTSOCK: return WSAENOTSOCK; | |
| case EDESTADDRREQ: return WSAEDESTADDRREQ; | |
| case EMSGSIZE: return WSAEMSGSIZE; | |
| case EPROTOTYPE: return WSAEPROTOTYPE; | |
| case ENOPROTOOPT: return WSAENOPROTOOPT; | |
| case EPROTONOSUPPORT: return WSAEPROTONOSUPPORT; | |
| case ESOCKTNOSUPPORT: return WSAESOCKTNOSUPPORT; | |
| case EOPNOTSUPP: return WSAEOPNOTSUPP; | |
| case EPFNOSUPPORT: return WSAEPFNOSUPPORT; | |
| case EAFNOSUPPORT: return WSAEAFNOSUPPORT; | |
| case EADDRINUSE: return WSAEADDRINUSE; | |
| case EADDRNOTAVAIL: return WSAEADDRNOTAVAIL; | |
| case ENETDOWN: return WSAENETDOWN; | |
| case ENETUNREACH: return WSAENETUNREACH; | |
| case ENETRESET: return WSAENETRESET; | |
| case ECONNABORTED: return WSAECONNABORTED; | |
| case EPIPE: | |
| case ECONNRESET: return WSAECONNRESET; | |
| case ENOBUFS: return WSAENOBUFS; | |
| case EISCONN: return WSAEISCONN; | |
| case ENOTCONN: return WSAENOTCONN; | |
| case ESHUTDOWN: return WSAESHUTDOWN; | |
| case ETOOMANYREFS: return WSAETOOMANYREFS; | |
| case ETIMEDOUT: return WSAETIMEDOUT; | |
| case ECONNREFUSED: return WSAECONNREFUSED; | |
| case ELOOP: return WSAELOOP; | |
| case ENAMETOOLONG: return WSAENAMETOOLONG; | |
| case EHOSTDOWN: return WSAEHOSTDOWN; | |
| case EHOSTUNREACH: return WSAEHOSTUNREACH; | |
| case ENOTEMPTY: return WSAENOTEMPTY; | |
| #ifdef EPROCLIM | |
| case EPROCLIM: return WSAEPROCLIM; | |
| #endif | |
| #ifdef EUSERS | |
| case EUSERS: return WSAEUSERS; | |
| #endif | |
| #ifdef EDQUOT | |
| case EDQUOT: return WSAEDQUOT; | |
| #endif | |
| #ifdef ESTALE | |
| case ESTALE: return WSAESTALE; | |
| #endif | |
| #ifdef EREMOTE | |
| case EREMOTE: return WSAEREMOTE; | |
| #endif | |
| default: errno=err; perror("sock_set_error"); return WSAEFAULT; | |
| } | |
| #endif | |
| return err; | |
| } | |
| /****************************************************************************** | |
| * NETCON_create | |
| * Basically calls 'socket()' | |
| */ | |
| DWORD NETCON_create(WININET_NETCONNECTION *connection, int domain, | |
| int type, int protocol) | |
| { | |
| #ifdef SONAME_LIBSSL | |
| if (connection->useSSL) | |
| return ERROR_NOT_SUPPORTED; | |
| #endif | |
| connection->socketFD = socket(domain, type, protocol); | |
| if (connection->socketFD == -1) | |
| return sock_get_error(errno); | |
| return ERROR_SUCCESS; | |
| } | |
| /****************************************************************************** | |
| * NETCON_close | |
| * Basically calls 'close()' unless we should use SSL | |
| */ | |
| DWORD NETCON_close(WININET_NETCONNECTION *connection) | |
| { | |
| int result; | |
| if (!NETCON_connected(connection)) return ERROR_SUCCESS; | |
| #ifdef SONAME_LIBSSL | |
| if (connection->useSSL) | |
| { | |
| pSSL_shutdown(connection->ssl_s); | |
| pSSL_free(connection->ssl_s); | |
| connection->ssl_s = NULL; | |
| connection->useSSL = FALSE; | |
| } | |
| #endif | |
| result = closesocket(connection->socketFD); | |
| connection->socketFD = -1; | |
| if (result == -1) | |
| return sock_get_error(errno); | |
| return ERROR_SUCCESS; | |
| } | |
| /****************************************************************************** | |
| * NETCON_secure_connect | |
| * Initiates a secure connection over an existing plaintext connection. | |
| */ | |
| DWORD NETCON_secure_connect(WININET_NETCONNECTION *connection, LPWSTR hostname) | |
| { | |
| DWORD res = ERROR_NOT_SUPPORTED; | |
| #ifdef SONAME_LIBSSL | |
| long verify_res; | |
| X509 *cert; | |
| /* can't connect if we are already connected */ | |
| if (connection->useSSL) | |
| { | |
| ERR("already connected\n"); | |
| return ERROR_INTERNET_CANNOT_CONNECT; | |
| } | |
| connection->ssl_s = pSSL_new(ctx); | |
| if (!connection->ssl_s) | |
| { | |
| ERR("SSL_new failed: %s\n", | |
| pERR_error_string(pERR_get_error(), 0)); | |
| res = ERROR_OUTOFMEMORY; | |
| goto fail; | |
| } | |
| if (!pSSL_set_fd(connection->ssl_s, connection->socketFD)) | |
| { | |
| ERR("SSL_set_fd failed: %s\n", | |
| pERR_error_string(pERR_get_error(), 0)); | |
| res = ERROR_INTERNET_SECURITY_CHANNEL_ERROR; | |
| goto fail; | |
| } | |
| if (pSSL_connect(connection->ssl_s) <= 0) | |
| { | |
| res = (DWORD_PTR)pSSL_get_ex_data(connection->ssl_s, error_idx); | |
| if (!res) | |
| res = ERROR_INTERNET_SECURITY_CHANNEL_ERROR; | |
| ERR("SSL_connect failed: %d\n", res); | |
| goto fail; | |
| } | |
| pSSL_set_ex_data(connection->ssl_s, hostname_idx, hostname); | |
| cert = pSSL_get_peer_certificate(connection->ssl_s); | |
| if (!cert) | |
| { | |
| ERR("no certificate for server %s\n", debugstr_w(hostname)); | |
| /* FIXME: is this the best error? */ | |
| res = ERROR_INTERNET_INVALID_CA; | |
| goto fail; | |
| } | |
| verify_res = pSSL_get_verify_result(connection->ssl_s); | |
| if (verify_res != X509_V_OK) | |
| { | |
| ERR("couldn't verify the security of the connection, %ld\n", verify_res); | |
| /* FIXME: we should set an error and return, but we only warn at | |
| * the moment */ | |
| } | |
| connection->useSSL = TRUE; | |
| return ERROR_SUCCESS; | |
| fail: | |
| if (connection->ssl_s) | |
| { | |
| pSSL_shutdown(connection->ssl_s); | |
| pSSL_free(connection->ssl_s); | |
| connection->ssl_s = NULL; | |
| } | |
| #endif | |
| return res; | |
| } | |
| /****************************************************************************** | |
| * NETCON_connect | |
| * Connects to the specified address. | |
| */ | |
| DWORD NETCON_connect(WININET_NETCONNECTION *connection, const struct sockaddr *serv_addr, | |
| unsigned int addrlen) | |
| { | |
| int result; | |
| result = connect(connection->socketFD, serv_addr, addrlen); | |
| if (result == -1) | |
| { | |
| WARN("Unable to connect to host (%s)\n", strerror(errno)); | |
| closesocket(connection->socketFD); | |
| connection->socketFD = -1; | |
| return sock_get_error(errno); | |
| } | |
| return ERROR_SUCCESS; | |
| } | |
| /****************************************************************************** | |
| * NETCON_send | |
| * Basically calls 'send()' unless we should use SSL | |
| * number of chars send is put in *sent | |
| */ | |
| DWORD NETCON_send(WININET_NETCONNECTION *connection, const void *msg, size_t len, int flags, | |
| int *sent /* out */) | |
| { | |
| if (!NETCON_connected(connection)) return ERROR_INTERNET_CONNECTION_ABORTED; | |
| if (!connection->useSSL) | |
| { | |
| *sent = send(connection->socketFD, msg, len, flags); | |
| if (*sent == -1) | |
| return sock_get_error(errno); | |
| return ERROR_SUCCESS; | |
| } | |
| else | |
| { | |
| #ifdef SONAME_LIBSSL | |
| if (flags) | |
| FIXME("SSL_write doesn't support any flags (%08x)\n", flags); | |
| *sent = pSSL_write(connection->ssl_s, msg, len); | |
| if (*sent < 1 && len) | |
| return ERROR_INTERNET_CONNECTION_ABORTED; | |
| return ERROR_SUCCESS; | |
| #else | |
| return ERROR_NOT_SUPPORTED; | |
| #endif | |
| } | |
| } | |
| /****************************************************************************** | |
| * NETCON_recv | |
| * Basically calls 'recv()' unless we should use SSL | |
| * number of chars received is put in *recvd | |
| */ | |
| DWORD NETCON_recv(WININET_NETCONNECTION *connection, void *buf, size_t len, int flags, | |
| int *recvd /* out */) | |
| { | |
| *recvd = 0; | |
| if (!NETCON_connected(connection)) return ERROR_INTERNET_CONNECTION_ABORTED; | |
| if (!len) | |
| return ERROR_SUCCESS; | |
| if (!connection->useSSL) | |
| { | |
| *recvd = recv(connection->socketFD, buf, len, flags); | |
| return *recvd == -1 ? sock_get_error(errno) : ERROR_SUCCESS; | |
| } | |
| else | |
| { | |
| #ifdef SONAME_LIBSSL | |
| *recvd = pSSL_read(connection->ssl_s, buf, len); | |
| return *recvd > 0 ? ERROR_SUCCESS : ERROR_INTERNET_CONNECTION_ABORTED; | |
| #else | |
| return ERROR_NOT_SUPPORTED; | |
| #endif | |
| } | |
| } | |
| /****************************************************************************** | |
| * NETCON_query_data_available | |
| * Returns the number of bytes of peeked data plus the number of bytes of | |
| * queued, but unread data. | |
| */ | |
| BOOL NETCON_query_data_available(WININET_NETCONNECTION *connection, DWORD *available) | |
| { | |
| *available = 0; | |
| if (!NETCON_connected(connection)) | |
| return FALSE; | |
| if (!connection->useSSL) | |
| { | |
| #ifdef FIONREAD | |
| int unread; | |
| int retval = ioctlsocket(connection->socketFD, FIONREAD, &unread); | |
| if (!retval) | |
| { | |
| TRACE("%d bytes of queued, but unread data\n", unread); | |
| *available += unread; | |
| } | |
| #endif | |
| } | |
| else | |
| { | |
| #ifdef SONAME_LIBSSL | |
| *available = pSSL_pending(connection->ssl_s); | |
| #endif | |
| } | |
| return TRUE; | |
| } | |
| LPCVOID NETCON_GetCert(WININET_NETCONNECTION *connection) | |
| { | |
| #ifdef SONAME_LIBSSL | |
| X509* cert; | |
| LPCVOID r = NULL; | |
| if (!connection->useSSL) | |
| return NULL; | |
| cert = pSSL_get_peer_certificate(connection->ssl_s); | |
| r = X509_to_cert_context(cert); | |
| return r; | |
| #else | |
| return NULL; | |
| #endif | |
| } | |
| DWORD NETCON_set_timeout(WININET_NETCONNECTION *connection, BOOL send, int value) | |
| { | |
| int result; | |
| struct timeval tv; | |
| /* FIXME: we should probably store the timeout in the connection to set | |
| * when we do connect */ | |
| if (!NETCON_connected(connection)) | |
| return ERROR_SUCCESS; | |
| /* value is in milliseconds, convert to struct timeval */ | |
| tv.tv_sec = value / 1000; | |
| tv.tv_usec = (value % 1000) * 1000; | |
| result = setsockopt(connection->socketFD, SOL_SOCKET, | |
| send ? SO_SNDTIMEO : SO_RCVTIMEO, (void*)&tv, | |
| sizeof(tv)); | |
| if (result == -1) | |
| { | |
| WARN("setsockopt failed (%s)\n", strerror(errno)); | |
| return sock_get_error(errno); | |
| } | |
| return ERROR_SUCCESS; | |
| } |