| /* -*- tab-width: 8; c-basic-offset: 4 -*- */ |
| /* |
| * Wine Driver for Libaudioio |
| * Derived from the Wine OSS Sample Driver |
| * Copyright 1994 Martin Ayotte |
| * 1999 Eric Pouech (async playing in waveOut/waveIn) |
| * 2000 Eric Pouech (loops in waveOut) |
| * 2002 Robert Lunnon (Modifications for libaudioio) |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * |
| * Note large hacks done to effectively disable DSound altogether |
| * Also Input is not yet working (Lots more work to be done there) |
| * But this does make a reasonable output driver for solaris untill the arts driver comes up to speed |
| */ |
| |
| /* |
| * FIXME: |
| * pause in waveOut does not work correctly |
| * full duplex (in/out) is not working (device is opened twice for Out |
| * and In) (OSS is known for its poor duplex capabilities, alsa is |
| * better) |
| */ |
| |
| /*#define EMULATE_SB16*/ |
| |
| #include "config.h" |
| |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #ifdef HAVE_SYS_IOCTL_H |
| # include <sys/ioctl.h> |
| #endif |
| #ifdef HAVE_SYS_MMAN_H |
| # include <sys/mman.h> |
| #endif |
| #ifdef HAVE_LIBAUDIOIO_H |
| #include <libaudioio.h> |
| #endif |
| #include "windef.h" |
| #include "wingdi.h" |
| #include "winerror.h" |
| #include "wine/winuser16.h" |
| #include "mmddk.h" |
| #include "dsound.h" |
| #include "dsdriver.h" |
| #include "wine/debug.h" |
| |
| WINE_DEFAULT_DEBUG_CHANNEL(wave); |
| |
| #ifdef HAVE_LIBAUDIOIO |
| |
| /* Allow 1% deviation for sample rates (some ES137x cards) */ |
| #define NEAR_MATCH(rate1,rate2) (((100*((int)(rate1)-(int)(rate2)))/(rate1))==0) |
| |
| #define SOUND_DEV "/dev/audio" |
| #define DEFAULT_FRAGMENT_SIZE 4096 |
| |
| |
| |
| #define MAX_WAVEOUTDRV (1) |
| #define MAX_WAVEINDRV (1) |
| |
| /* state diagram for waveOut writing: |
| * |
| * +---------+-------------+---------------+---------------------------------+ |
| * | state | function | event | new state | |
| * +---------+-------------+---------------+---------------------------------+ |
| * | | open() | | STOPPED | |
| * | PAUSED | write() | | PAUSED | |
| * | STOPPED | write() | <thrd create> | PLAYING | |
| * | PLAYING | write() | HEADER | PLAYING | |
| * | (other) | write() | <error> | | |
| * | (any) | pause() | PAUSING | PAUSED | |
| * | PAUSED | restart() | RESTARTING | PLAYING (if no thrd => STOPPED) | |
| * | (any) | reset() | RESETTING | STOPPED | |
| * | (any) | close() | CLOSING | CLOSED | |
| * +---------+-------------+---------------+---------------------------------+ |
| */ |
| |
| /* states of the playing device */ |
| #define WINE_WS_PLAYING 0 |
| #define WINE_WS_PAUSED 1 |
| #define WINE_WS_STOPPED 2 |
| #define WINE_WS_CLOSED 3 |
| |
| /* events to be send to device */ |
| #define WINE_WM_PAUSING (WM_USER + 1) |
| #define WINE_WM_RESTARTING (WM_USER + 2) |
| #define WINE_WM_RESETTING (WM_USER + 3) |
| #define WINE_WM_CLOSING (WM_USER + 4) |
| #define WINE_WM_HEADER (WM_USER + 5) |
| |
| #define WINE_WM_FIRST WINE_WM_PAUSING |
| #define WINE_WM_LAST WINE_WM_HEADER |
| |
| typedef struct { |
| int msg; |
| DWORD param; |
| } WWO_MSG; |
| |
| typedef struct { |
| int unixdev; |
| volatile int state; /* one of the WINE_WS_ manifest constants */ |
| DWORD dwFragmentSize; /* size of OSS buffer fragment */ |
| WAVEOPENDESC waveDesc; |
| WORD wFlags; |
| PCMWAVEFORMAT format; |
| LPWAVEHDR lpQueuePtr; /* start of queued WAVEHDRs (waiting to be notified) */ |
| LPWAVEHDR lpPlayPtr; /* start of not yet fully played buffers */ |
| LPWAVEHDR lpLoopPtr; /* pointer of first buffer in loop, if any */ |
| DWORD dwLoops; /* private copy of loop counter */ |
| |
| DWORD dwLastFragDone; /* time in ms, when last played fragment will be actually played */ |
| DWORD dwPlayedTotal; /* number of bytes played since opening */ |
| |
| /* info on current lpQueueHdr->lpWaveHdr */ |
| DWORD dwOffCurrHdr; /* offset in lpPlayPtr->lpData for fragments */ |
| DWORD dwRemain; /* number of bytes to write to end the current fragment */ |
| |
| /* synchronization stuff */ |
| HANDLE hThread; |
| DWORD dwThreadID; |
| HANDLE hEvent; |
| #define WWO_RING_BUFFER_SIZE 30 |
| WWO_MSG messages[WWO_RING_BUFFER_SIZE]; |
| int msg_tosave; |
| int msg_toget; |
| HANDLE msg_event; |
| CRITICAL_SECTION msg_crst; |
| WAVEOUTCAPSA caps; |
| |
| /* DirectSound stuff */ |
| LPBYTE mapping; |
| DWORD maplen; |
| } WINE_WAVEOUT; |
| |
| typedef struct { |
| int unixdev; |
| volatile int state; |
| DWORD dwFragmentSize; /* OpenSound '/dev/dsp' give us that size */ |
| WAVEOPENDESC waveDesc; |
| WORD wFlags; |
| PCMWAVEFORMAT format; |
| LPWAVEHDR lpQueuePtr; |
| DWORD dwTotalRecorded; |
| WAVEINCAPSA caps; |
| BOOL bTriggerSupport; |
| |
| /* synchronization stuff */ |
| HANDLE hThread; |
| DWORD dwThreadID; |
| HANDLE hEvent; |
| } WINE_WAVEIN; |
| |
| static WINE_WAVEOUT WOutDev [MAX_WAVEOUTDRV]; |
| static WINE_WAVEIN WInDev [MAX_WAVEINDRV ]; |
| |
| static DWORD wodDsCreate(UINT wDevID, PIDSDRIVER* drv); |
| |
| /*======================================================================* |
| * Low level WAVE implementation * |
| *======================================================================*/ |
| SampleSpec_t spec[2]; |
| |
| |
| |
| LONG LIBAUDIOIO_WaveInit(void) |
| { |
| int audio; |
| int smplrate; |
| int samplesize = 16; |
| int dsp_stereo = 1; |
| int bytespersmpl; |
| int caps; |
| int mask; |
| int i; |
| |
| int audio_fd; |
| int mode; |
| TRACE("Init ENTERED rate = %d\n",spec[PLAYBACK].rate); |
| spec[RECORD].channels=spec[PLAYBACK].channels=2; |
| spec[RECORD].max_blocks=spec[PLAYBACK].max_blocks=16; |
| spec[RECORD].rate=spec[PLAYBACK].rate=44100; |
| spec[RECORD].encoding=spec[PLAYBACK].encoding= ENCODE_PCM; |
| spec[RECORD].precision=spec[PLAYBACK].precision=16 ; |
| spec[RECORD].endian=spec[PLAYBACK].endian=ENDIAN_INTEL; |
| spec[RECORD].disable_threads=spec[PLAYBACK].disable_threads=1; |
| spec[RECORD].type=spec[PLAYBACK].type=TYPE_SIGNED; /* in 16 bit mode this is what typical PC hardware expects */ |
| |
| mode = O_WRONLY|O_NDELAY; |
| |
| /* start with output device */ |
| |
| /* initialize all device handles to -1 */ |
| for (i = 0; i < MAX_WAVEOUTDRV; ++i) |
| { |
| WOutDev[i].unixdev = -1; |
| } |
| |
| /* FIXME: only one device is supported */ |
| memset(&WOutDev[0].caps, 0, sizeof(WOutDev[0].caps)); |
| |
| |
| |
| /* FIXME: some programs compare this string against the content of the registry |
| * for MM drivers. The names have to match in order for the program to work |
| * (e.g. MS win9x mplayer.exe) |
| */ |
| #ifdef EMULATE_SB16 |
| WOutDev[0].caps.wMid = 0x0002; |
| WOutDev[0].caps.wPid = 0x0104; |
| strcpy(WOutDev[0].caps.szPname, "SB16 Wave Out"); |
| #else |
| WOutDev[0].caps.wMid = 0x00FF; /* Manufac ID */ |
| WOutDev[0].caps.wPid = 0x0001; /* Product ID */ |
| /* strcpy(WOutDev[0].caps.szPname, "OpenSoundSystem WAVOUT Driver");*/ |
| strcpy(WOutDev[0].caps.szPname, "CS4236/37/38"); |
| #endif |
| WOutDev[0].caps.vDriverVersion = 0x0100; |
| WOutDev[0].caps.dwFormats = 0x00000000; |
| WOutDev[0].caps.dwSupport = WAVECAPS_VOLUME; |
| |
| /* |
| * Libaudioio works differently, you tell it what spec audio you want to write and it |
| * Guarantees to match it by converting to the final format on the fly |
| *So we dont need to read back and compare |
| */ |
| |
| bytespersmpl = spec[PLAYBACK].precision/8; |
| |
| WOutDev[0].caps.wChannels = spec[PLAYBACK].channels; |
| |
| |
| /* Fixme: Libaudioio 0.2 doesn't support balance yet (Libaudioio 0.3 does so this must be fixed later)*/ |
| |
| /* if (WOutDev[0].caps.wChannels > 1) WOutDev[0].caps.dwSupport |= WAVECAPS_LRVOLUME;*/ |
| TRACE("Init sammplerate= %d\n",spec[PLAYBACK].rate); |
| |
| smplrate = spec[PLAYBACK].rate; |
| /* |
| * We have set up the data format to be 16 bit signed in intel format |
| * For Big Endian machines libaudioio will convert the data to bigendian for us |
| */ |
| |
| WOutDev[0].caps.dwFormats |= WAVE_FORMAT_4M16; |
| if (WOutDev[0].caps.wChannels > 1) |
| WOutDev[0].caps.dwFormats |= WAVE_FORMAT_4S16; |
| |
| /* Don't understand this yet, but I dont think this functionality is portable, leave here for future evaluation |
| * if (IOCTL(audio, SNDCTL_DSP_GETCAPS, caps) == 0) { |
| * TRACE("OSS dsp out caps=%08X\n", caps); |
| * if ((caps & DSP_CAP_REALTIME) && !(caps & DSP_CAP_BATCH)) { |
| * WOutDev[0].caps.dwSupport |= WAVECAPS_SAMPLEACCURATE; |
| * } |
| */ /* well, might as well use the DirectSound cap flag for something */ |
| /* if ((caps & DSP_CAP_TRIGGER) && (caps & DSP_CAP_MMAP) && |
| * !(caps & DSP_CAP_BATCH)) |
| * WOutDev[0].caps.dwSupport |= WAVECAPS_DIRECTSOUND; |
| * } |
| */ |
| |
| |
| /* |
| * Note that libaudioio audio capture is not proven yet, in our open call |
| * set the spec for input audio the same as for output |
| */ |
| TRACE("out dwFormats = %08lX, dwSupport = %08lX\n", |
| WOutDev[0].caps.dwFormats, WOutDev[0].caps.dwSupport); |
| |
| for (i = 0; i < MAX_WAVEINDRV; ++i) |
| { |
| WInDev[i].unixdev = -1; |
| } |
| |
| memset(&WInDev[0].caps, 0, sizeof(WInDev[0].caps)); |
| |
| |
| |
| #ifdef EMULATE_SB16 |
| WInDev[0].caps.wMid = 0x0002; |
| WInDev[0].caps.wPid = 0x0004; |
| strcpy(WInDev[0].caps.szPname, "SB16 Wave In"); |
| #else |
| WInDev[0].caps.wMid = 0x00FF; /* Manufac ID */ |
| WInDev[0].caps.wPid = 0x0001; /* Product ID */ |
| strcpy(WInDev[0].caps.szPname, "OpenSoundSystem WAVIN Driver"); |
| #endif |
| WInDev[0].caps.dwFormats = 0x00000000; |
| WInDev[0].caps.wChannels = spec[RECORD].channels; |
| |
| WInDev[0].bTriggerSupport = TRUE; /* Maybe :-) */ |
| |
| bytespersmpl = spec[RECORD].precision/8; |
| smplrate = spec[RECORD].rate; |
| |
| WInDev[0].caps.dwFormats |= WAVE_FORMAT_4M16; |
| if (WInDev[0].caps.wChannels > 1) |
| WInDev[0].caps.dwFormats |= WAVE_FORMAT_4S16; |
| |
| |
| TRACE("in dwFormats = %08lX\n", WInDev[0].caps.dwFormats); |
| |
| return 0; |
| } |
| |
| /************************************************************************** |
| * LIBAUDIOIO_NotifyClient [internal] |
| */ |
| static DWORD LIBAUDIOIO_NotifyClient(UINT wDevID, WORD wMsg, DWORD dwParam1, DWORD dwParam2) |
| { |
| TRACE("wDevID = %04X wMsg = 0x%04x dwParm1 = %04lX dwParam2 = %04lX\n",wDevID, wMsg, dwParam1, dwParam2); |
| |
| switch (wMsg) { |
| case WOM_OPEN: |
| case WOM_CLOSE: |
| case WOM_DONE: |
| if (wDevID >= MAX_WAVEOUTDRV) return MCIERR_INTERNAL; |
| |
| if (WOutDev[wDevID].wFlags != DCB_NULL && |
| !DriverCallback(WOutDev[wDevID].waveDesc.dwCallback, |
| WOutDev[wDevID].wFlags, |
| WOutDev[wDevID].waveDesc.hWave, |
| wMsg, |
| WOutDev[wDevID].waveDesc.dwInstance, |
| dwParam1, |
| dwParam2)) { |
| WARN("can't notify client !\n"); |
| return MMSYSERR_NOERROR; |
| } |
| break; |
| |
| case WIM_OPEN: |
| case WIM_CLOSE: |
| case WIM_DATA: |
| if (wDevID >= MAX_WAVEINDRV) return MCIERR_INTERNAL; |
| |
| if (WInDev[wDevID].wFlags != DCB_NULL && |
| !DriverCallback(WInDev[wDevID].waveDesc.dwCallback, |
| WInDev[wDevID].wFlags, |
| WInDev[wDevID].waveDesc.hWave, |
| wMsg, |
| WInDev[wDevID].waveDesc.dwInstance, |
| dwParam1, |
| dwParam2)) { |
| WARN("can't notify client !\n"); |
| return MMSYSERR_NOERROR; |
| } |
| break; |
| default: |
| FIXME("Unknown CB message %u\n", wMsg); |
| break; |
| } |
| return 0; |
| } |
| |
| /*======================================================================* |
| * Low level WAVE OUT implementation * |
| *======================================================================*/ |
| |
| /************************************************************************** |
| * wodPlayer_WriteFragments [internal] |
| * |
| * wodPlayer helper. Writes as many fragments as it can to unixdev. |
| * Returns TRUE in case of buffer underrun. |
| */ |
| static BOOL wodPlayer_WriteFragments(WINE_WAVEOUT* wwo) |
| { |
| LPWAVEHDR lpWaveHdr; |
| LPBYTE lpData; |
| int count; |
| |
| TRACE("wodPlayer_WriteFragments sammplerate= %d\n",spec[PLAYBACK].rate); |
| for (;;) { |
| |
| |
| /* |
| * Libaudioio doesn't buffer the same way as linux, you can write data is any block size |
| *And libaudioio just tracks the number of blocks in the streams queue to control latency |
| */ |
| |
| if (!AudioIOCheckWriteReady()) return FALSE; /* Returns false if you have execeeded your specified latency (No space left)*/ |
| |
| lpWaveHdr = wwo->lpPlayPtr; |
| if (!lpWaveHdr) { |
| if (wwo->dwRemain > 0 && /* still data to send to complete current fragment */ |
| wwo->dwLastFragDone && /* first fragment has been played */ |
| AudioIOCheckUnderrun()) { /* done with all waveOutWrite()' fragments */ |
| /* FIXME: should do better handling here */ |
| WARN("Oooch, buffer underrun !\n"); |
| return TRUE; /* force resetting of waveOut device */ |
| } |
| return FALSE; /* wait a bit */ |
| } |
| |
| if (wwo->dwOffCurrHdr == 0) { |
| TRACE("Starting a new wavehdr %p of %ld bytes\n", lpWaveHdr, lpWaveHdr->dwBufferLength); |
| if (lpWaveHdr->dwFlags & WHDR_BEGINLOOP) { |
| if (wwo->lpLoopPtr) { |
| WARN("Already in a loop. Discarding loop on this header (%p)\n", lpWaveHdr); |
| } else { |
| TRACE("Starting loop (%ldx) with %p\n", lpWaveHdr->dwLoops, lpWaveHdr); |
| wwo->lpLoopPtr = lpWaveHdr; |
| /* Windows does not touch WAVEHDR.dwLoops, |
| * so we need to make an internal copy */ |
| wwo->dwLoops = lpWaveHdr->dwLoops; |
| } |
| } |
| } |
| |
| lpData = lpWaveHdr->lpData; |
| |
| /* finish current wave hdr ? */ |
| if (wwo->dwOffCurrHdr + wwo->dwRemain >= lpWaveHdr->dwBufferLength) { |
| DWORD toWrite = lpWaveHdr->dwBufferLength - wwo->dwOffCurrHdr; |
| |
| /* write end of current wave hdr */ |
| count = AudioIOWrite(lpData + wwo->dwOffCurrHdr, toWrite); |
| TRACE("write(%p[%5lu], %5lu) => %d\n", lpData, wwo->dwOffCurrHdr, toWrite, count); |
| |
| if (count > 0 || toWrite == 0) { |
| DWORD tc = GetTickCount(); |
| |
| if (wwo->dwLastFragDone /* + guard time ?? */ < tc) |
| wwo->dwLastFragDone = tc; |
| wwo->dwLastFragDone += (toWrite * 1000) / wwo->format.wf.nAvgBytesPerSec; |
| |
| lpWaveHdr->reserved = wwo->dwLastFragDone; |
| TRACE("Tagging hdr %p with %08lx\n", lpWaveHdr, wwo->dwLastFragDone); |
| |
| /* WAVEHDR written, go to next one */ |
| if ((lpWaveHdr->dwFlags & WHDR_ENDLOOP) && wwo->lpLoopPtr) { |
| if (--wwo->dwLoops > 0) { |
| wwo->lpPlayPtr = wwo->lpLoopPtr; |
| } else { |
| /* last one played */ |
| if (wwo->lpLoopPtr != lpWaveHdr && (lpWaveHdr->dwFlags & WHDR_BEGINLOOP)) { |
| FIXME("Correctly handled case ? (ending loop buffer also starts a new loop)\n"); |
| /* shall we consider the END flag for the closing loop or for |
| * the opening one or for both ??? |
| * code assumes for closing loop only |
| */ |
| wwo->lpLoopPtr = lpWaveHdr; |
| } else { |
| wwo->lpLoopPtr = NULL; |
| } |
| wwo->lpPlayPtr = lpWaveHdr->lpNext; |
| } |
| } else { |
| wwo->lpPlayPtr = lpWaveHdr->lpNext; |
| } |
| wwo->dwOffCurrHdr = 0; |
| if ((wwo->dwRemain -= count) == 0) { |
| wwo->dwRemain = wwo->dwFragmentSize; |
| } |
| } |
| continue; /* try to go to use next wavehdr */ |
| } else { |
| count = AudioIOWrite( lpData + wwo->dwOffCurrHdr, wwo->dwRemain); |
| TRACE("write(%p[%5lu], %5lu) => %d\n", lpData, wwo->dwOffCurrHdr, wwo->dwRemain, count); |
| if (count > 0) { |
| DWORD tc = GetTickCount(); |
| |
| if (wwo->dwLastFragDone /* + guard time ?? */ < tc) |
| wwo->dwLastFragDone = tc; |
| wwo->dwLastFragDone += (wwo->dwRemain * 1000) / wwo->format.wf.nAvgBytesPerSec; |
| |
| TRACE("Tagging frag with %08lx\n", wwo->dwLastFragDone); |
| |
| wwo->dwOffCurrHdr += count; |
| wwo->dwRemain = wwo->dwFragmentSize; |
| } |
| } |
| } |
| |
| } |
| |
| int wodPlayer_Message(WINE_WAVEOUT *wwo, int msg, DWORD param) |
| { |
| TRACE("wodPlayerMessage sammplerate= %d msg=%d\n",spec[PLAYBACK].rate,msg); |
| EnterCriticalSection(&wwo->msg_crst); |
| if ((wwo->msg_tosave == wwo->msg_toget) /* buffer overflow ? */ |
| && (wwo->messages[wwo->msg_toget].msg)) |
| { |
| ERR("buffer overflow !?\n"); |
| LeaveCriticalSection(&wwo->msg_crst); |
| return 0; |
| } |
| |
| wwo->messages[wwo->msg_tosave].msg = msg; |
| wwo->messages[wwo->msg_tosave].param = param; |
| wwo->msg_tosave++; |
| if (wwo->msg_tosave > WWO_RING_BUFFER_SIZE-1) |
| wwo->msg_tosave = 0; |
| LeaveCriticalSection(&wwo->msg_crst); |
| /* signal a new message */ |
| SetEvent(wwo->msg_event); |
| return 1; |
| } |
| |
| int wodPlayer_RetrieveMessage(WINE_WAVEOUT *wwo, int *msg, DWORD *param) |
| { |
| EnterCriticalSection(&wwo->msg_crst); |
| |
| if (wwo->msg_toget == wwo->msg_tosave) /* buffer empty ? */ |
| { |
| LeaveCriticalSection(&wwo->msg_crst); |
| return 0; |
| } |
| |
| *msg = wwo->messages[wwo->msg_toget].msg; |
| wwo->messages[wwo->msg_toget].msg = 0; |
| *param = wwo->messages[wwo->msg_toget].param; |
| wwo->msg_toget++; |
| if (wwo->msg_toget > WWO_RING_BUFFER_SIZE-1) |
| wwo->msg_toget = 0; |
| LeaveCriticalSection(&wwo->msg_crst); |
| return 1; |
| } |
| |
| /************************************************************************** |
| * wodPlayer_Notify [internal] |
| * |
| * wodPlayer helper. Notifies (and remove from queue) all the wavehdr which content |
| * have been played (actually to speaker, not to unixdev fd). |
| */ |
| static void wodPlayer_Notify(WINE_WAVEOUT* wwo, WORD uDevID, BOOL force) |
| { |
| LPWAVEHDR lpWaveHdr; |
| DWORD tc = GetTickCount(); |
| |
| while (wwo->lpQueuePtr && |
| (force || |
| (wwo->lpQueuePtr != wwo->lpPlayPtr && wwo->lpQueuePtr != wwo->lpLoopPtr))) { |
| lpWaveHdr = wwo->lpQueuePtr; |
| |
| if (lpWaveHdr->reserved > tc && !force) break; |
| |
| wwo->dwPlayedTotal += lpWaveHdr->dwBufferLength; |
| wwo->lpQueuePtr = lpWaveHdr->lpNext; |
| |
| lpWaveHdr->dwFlags &= ~WHDR_INQUEUE; |
| lpWaveHdr->dwFlags |= WHDR_DONE; |
| |
| TRACE("Notifying client with %p\n", lpWaveHdr); |
| if (LIBAUDIOIO_NotifyClient(uDevID, WOM_DONE, (DWORD)lpWaveHdr, 0) != MMSYSERR_NOERROR) { |
| WARN("can't notify client !\n"); |
| } |
| } |
| } |
| |
| /************************************************************************** |
| * wodPlayer_Reset [internal] |
| * |
| * wodPlayer helper. Resets current output stream. |
| */ |
| static void wodPlayer_Reset(WINE_WAVEOUT* wwo, WORD uDevID, BOOL reset) |
| { |
| /* updates current notify list */ |
| wodPlayer_Notify(wwo, uDevID, FALSE); |
| |
| /* flush all possible output */ |
| /* |
| *FIXME In the original code I think this aborted IO. With Libaudioio you have to wait |
| * The following function just blocks untill I/O is complete |
| * There is possibly a way to abort the blocks buffered in streams |
| * but this approach seems to work OK |
| */ |
| AudioIOFlush(); |
| |
| |
| |
| wwo->dwOffCurrHdr = 0; |
| wwo->dwRemain = wwo->dwFragmentSize; |
| if (reset) { |
| /* empty notify list */ |
| wodPlayer_Notify(wwo, uDevID, TRUE); |
| |
| wwo->lpPlayPtr = wwo->lpQueuePtr = wwo->lpLoopPtr = NULL; |
| wwo->state = WINE_WS_STOPPED; |
| wwo->dwPlayedTotal = 0; |
| } else { |
| /* FIXME: this is not accurate when looping, but can be do better ? */ |
| wwo->lpPlayPtr = (wwo->lpLoopPtr) ? wwo->lpLoopPtr : wwo->lpQueuePtr; |
| wwo->state = WINE_WS_PAUSED; |
| } |
| } |
| |
| /************************************************************************** |
| * wodPlayer [internal] |
| */ |
| static DWORD CALLBACK wodPlayer(LPVOID pmt) |
| { |
| WORD uDevID = (DWORD)pmt; |
| WINE_WAVEOUT* wwo = (WINE_WAVEOUT*)&WOutDev[uDevID]; |
| WAVEHDR* lpWaveHdr; |
| DWORD dwSleepTime; |
| int msg; |
| DWORD param; |
| DWORD tc; |
| BOOL had_msg; |
| |
| wwo->state = WINE_WS_STOPPED; |
| |
| wwo->dwLastFragDone = 0; |
| wwo->dwOffCurrHdr = 0; |
| wwo->dwRemain = wwo->dwFragmentSize; |
| wwo->lpQueuePtr = wwo->lpPlayPtr = wwo->lpLoopPtr = NULL; |
| wwo->dwPlayedTotal = 0; |
| |
| TRACE("imhere[0]\n"); |
| SetEvent(wwo->hEvent); |
| |
| for (;;) { |
| /* wait for dwSleepTime or an event in thread's queue |
| * FIXME: |
| * - is wait time calculation optimal ? |
| * - these 100 ms parts should be changed, but Eric reports |
| * that the wodPlayer thread might lock up if we use INFINITE |
| * (strange !), so I better don't change that now... */ |
| if (wwo->state != WINE_WS_PLAYING) |
| dwSleepTime = 100; |
| else |
| { |
| tc = GetTickCount(); |
| if (tc < wwo->dwLastFragDone) |
| { |
| /* calculate sleep time depending on when the last fragment |
| will be played */ |
| dwSleepTime = (wwo->dwLastFragDone - tc)*7/10; |
| if (dwSleepTime > 100) |
| dwSleepTime = 100; |
| } |
| else |
| dwSleepTime = 0; |
| } |
| |
| TRACE("imhere[1] tc = %08lx\n", GetTickCount()); |
| if (dwSleepTime) |
| WaitForSingleObject(wwo->msg_event, dwSleepTime); |
| TRACE("imhere[2] (q=%p p=%p) tc = %08lx\n", wwo->lpQueuePtr, |
| wwo->lpPlayPtr, GetTickCount()); |
| had_msg = FALSE; |
| while (wodPlayer_RetrieveMessage(wwo, &msg, ¶m)) { |
| had_msg = TRUE; |
| switch (msg) { |
| case WINE_WM_PAUSING: |
| wodPlayer_Reset(wwo, uDevID, FALSE); |
| wwo->state = WINE_WS_PAUSED; |
| SetEvent(wwo->hEvent); |
| break; |
| case WINE_WM_RESTARTING: |
| wwo->state = WINE_WS_PLAYING; |
| SetEvent(wwo->hEvent); |
| break; |
| case WINE_WM_HEADER: |
| lpWaveHdr = (LPWAVEHDR)param; |
| |
| /* insert buffer at the end of queue */ |
| { |
| LPWAVEHDR* wh; |
| for (wh = &(wwo->lpQueuePtr); *wh; wh = &((*wh)->lpNext)); |
| *wh = lpWaveHdr; |
| } |
| if (!wwo->lpPlayPtr) wwo->lpPlayPtr = lpWaveHdr; |
| if (wwo->state == WINE_WS_STOPPED) |
| wwo->state = WINE_WS_PLAYING; |
| break; |
| case WINE_WM_RESETTING: |
| wodPlayer_Reset(wwo, uDevID, TRUE); |
| SetEvent(wwo->hEvent); |
| break; |
| case WINE_WM_CLOSING: |
| /* sanity check: this should not happen since the device must have been reset before */ |
| if (wwo->lpQueuePtr || wwo->lpPlayPtr) ERR("out of sync\n"); |
| wwo->hThread = 0; |
| wwo->state = WINE_WS_CLOSED; |
| SetEvent(wwo->hEvent); |
| ExitThread(0); |
| /* shouldn't go here */ |
| default: |
| FIXME("unknown message %d\n", msg); |
| break; |
| } |
| if (wwo->state == WINE_WS_PLAYING) { |
| wodPlayer_WriteFragments(wwo); |
| } |
| wodPlayer_Notify(wwo, uDevID, FALSE); |
| } |
| |
| if (!had_msg) { /* if we've received a msg we've just done this so we |
| won't repeat it */ |
| if (wwo->state == WINE_WS_PLAYING) { |
| wodPlayer_WriteFragments(wwo); |
| } |
| wodPlayer_Notify(wwo, uDevID, FALSE); |
| } |
| } |
| ExitThread(0); |
| /* just for not generating compilation warnings... should never be executed */ |
| return 0; |
| } |
| |
| /************************************************************************** |
| * wodGetDevCaps [internal] |
| */ |
| static DWORD wodGetDevCaps(WORD wDevID, LPWAVEOUTCAPSA lpCaps, DWORD dwSize) |
| { |
| TRACE("(%u, %p, %lu);\n", wDevID, lpCaps, dwSize); |
| |
| if (lpCaps == NULL) return MMSYSERR_NOTENABLED; |
| |
| if (wDevID >= MAX_WAVEOUTDRV) { |
| TRACE("MAX_WAVOUTDRV reached !\n"); |
| return MMSYSERR_BADDEVICEID; |
| } |
| |
| memcpy(lpCaps, &WOutDev[wDevID].caps, min(dwSize, sizeof(*lpCaps))); |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * wodOpen [internal] |
| */ |
| static DWORD wodOpen(WORD wDevID, LPWAVEOPENDESC lpDesc, DWORD dwFlags) |
| { |
| int audio; |
| int format; |
| int sample_rate; |
| int dsp_stereo; |
| int fragment_size; |
| int audio_fragment; |
| WINE_WAVEOUT* wwo; |
| |
| TRACE("(%u, %p, %08lX);\n", wDevID, lpDesc, dwFlags); |
| if (lpDesc == NULL) { |
| WARN("Invalid Parameter !\n"); |
| return MMSYSERR_INVALPARAM; |
| } |
| if (wDevID >= MAX_WAVEOUTDRV) { |
| TRACE("MAX_WAVOUTDRV reached !\n"); |
| return MMSYSERR_BADDEVICEID; |
| } |
| |
| /* only PCM format is supported so far... */ |
| if (lpDesc->lpFormat->wFormatTag != WAVE_FORMAT_PCM || |
| lpDesc->lpFormat->nChannels == 0 || |
| lpDesc->lpFormat->nSamplesPerSec == 0) { |
| WARN("Bad format: tag=%04X nChannels=%d nSamplesPerSec=%ld !\n", |
| lpDesc->lpFormat->wFormatTag, lpDesc->lpFormat->nChannels, |
| lpDesc->lpFormat->nSamplesPerSec); |
| return WAVERR_BADFORMAT; |
| } |
| |
| if (dwFlags & WAVE_FORMAT_QUERY) { |
| TRACE("Query format: tag=%04X nChannels=%d nSamplesPerSec=%ld !\n", |
| lpDesc->lpFormat->wFormatTag, lpDesc->lpFormat->nChannels, |
| lpDesc->lpFormat->nSamplesPerSec); |
| return MMSYSERR_NOERROR; |
| } |
| |
| wwo = &WOutDev[wDevID]; |
| |
| if ((dwFlags & WAVE_DIRECTSOUND) && !(wwo->caps.dwSupport & WAVECAPS_DIRECTSOUND)) |
| /* not supported, ignore it */ |
| dwFlags &= ~WAVE_DIRECTSOUND; |
| |
| if (access(SOUND_DEV, 0) != 0) |
| return MMSYSERR_NOTENABLED; |
| |
| audio = AudioIOOpenX( O_WRONLY|O_NDELAY,&spec[PLAYBACK],&spec[PLAYBACK]); |
| |
| if (audio == -1) { |
| WARN("can't open sound device %s (%s)!\n", SOUND_DEV, strerror(errno)); |
| return MMSYSERR_ALLOCATED; |
| } |
| /* fcntl(audio, F_SETFD, 1); *//* set close on exec flag - Dunno about this (RL)*/ |
| wwo->unixdev = audio; |
| wwo->wFlags = HIWORD(dwFlags & CALLBACK_TYPEMASK); |
| |
| memcpy(&wwo->waveDesc, lpDesc, sizeof(WAVEOPENDESC)); |
| memcpy(&wwo->format, lpDesc->lpFormat, sizeof(PCMWAVEFORMAT)); |
| |
| if (wwo->format.wBitsPerSample == 0) { |
| WARN("Resetting zeroed wBitsPerSample\n"); |
| wwo->format.wBitsPerSample = 8 * |
| (wwo->format.wf.nAvgBytesPerSec / |
| wwo->format.wf.nSamplesPerSec) / |
| wwo->format.wf.nChannels; |
| } |
| |
| if (dwFlags & WAVE_DIRECTSOUND) { |
| if (wwo->caps.dwSupport & WAVECAPS_SAMPLEACCURATE) |
| /* we have realtime DirectSound, fragments just waste our time, |
| * but a large buffer is good, so choose 64KB (32 * 2^11) */ |
| audio_fragment = 0x0020000B; |
| else |
| /* to approximate realtime, we must use small fragments, |
| * let's try to fragment the above 64KB (256 * 2^8) */ |
| audio_fragment = 0x01000008; |
| } else { |
| /* shockwave player uses only 4 1k-fragments at a rate of 22050 bytes/sec |
| * thus leading to 46ms per fragment, and a turnaround time of 185ms |
| */ |
| /* 16 fragments max, 2^10=1024 bytes per fragment */ |
| audio_fragment = 0x000F000A; |
| } |
| sample_rate = wwo->format.wf.nSamplesPerSec; |
| dsp_stereo = (wwo->format.wf.nChannels > 1) ? 1 : 0; |
| |
| |
| |
| /*Set the sample rate*/ |
| spec[PLAYBACK].rate=sample_rate; |
| |
| /*And the size and signedness*/ |
| spec[PLAYBACK].precision=(wwo->format.wBitsPerSample ); |
| if (spec[PLAYBACK].precision==16) spec[PLAYBACK].type=TYPE_SIGNED; else spec[PLAYBACK].type=TYPE_UNSIGNED; |
| spec[PLAYBACK].channels=(wwo->format.wf.nChannels); |
| spec[PLAYBACK].encoding=ENCODE_PCM; |
| spec[PLAYBACK].endian=ENDIAN_INTEL; |
| spec[PLAYBACK].max_blocks=16; /*FIXME This is the libaudioio equivalent to fragments, it controls latency*/ |
| |
| audio = AudioIOOpenX( O_WRONLY|O_NDELAY,&spec[PLAYBACK],&spec[PLAYBACK]); |
| |
| if (audio == -1) { |
| WARN("can't open sound device %s (%s)!\n", SOUND_DEV, strerror(errno)); |
| return MMSYSERR_ALLOCATED; |
| } |
| /* fcntl(audio, F_SETFD, 1); *//* set close on exec flag */ |
| wwo->unixdev = audio; |
| |
| |
| /* even if we set fragment size above, read it again, just in case */ |
| |
| wwo->dwFragmentSize = DEFAULT_FRAGMENT_SIZE; |
| |
| wwo->msg_toget = 0; |
| wwo->msg_tosave = 0; |
| wwo->msg_event = CreateEventA(NULL, FALSE, FALSE, NULL); |
| memset(wwo->messages, 0, sizeof(WWO_MSG)*WWO_RING_BUFFER_SIZE); |
| InitializeCriticalSection(&wwo->msg_crst); |
| |
| if (!(dwFlags & WAVE_DIRECTSOUND)) { |
| wwo->hEvent = CreateEventA(NULL, FALSE, FALSE, NULL); |
| wwo->hThread = CreateThread(NULL, 0, wodPlayer, (LPVOID)(DWORD)wDevID, 0, &(wwo->dwThreadID)); |
| WaitForSingleObject(wwo->hEvent, INFINITE); |
| } else { |
| wwo->hEvent = INVALID_HANDLE_VALUE; |
| wwo->hThread = INVALID_HANDLE_VALUE; |
| wwo->dwThreadID = 0; |
| } |
| |
| TRACE("fd=%d fragmentSize=%ld\n", |
| wwo->unixdev, wwo->dwFragmentSize); |
| if (wwo->dwFragmentSize % wwo->format.wf.nBlockAlign) |
| ERR("Fragment doesn't contain an integral number of data blocks\n"); |
| |
| TRACE("wBitsPerSample=%u, nAvgBytesPerSec=%lu, nSamplesPerSec=%lu, nChannels=%u nBlockAlign=%u!\n", |
| wwo->format.wBitsPerSample, wwo->format.wf.nAvgBytesPerSec, |
| wwo->format.wf.nSamplesPerSec, wwo->format.wf.nChannels, |
| wwo->format.wf.nBlockAlign); |
| |
| if (LIBAUDIOIO_NotifyClient(wDevID, WOM_OPEN, 0L, 0L) != MMSYSERR_NOERROR) { |
| WARN("can't notify client !\n"); |
| return MMSYSERR_INVALPARAM; |
| } |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * wodClose [internal] |
| */ |
| static DWORD wodClose(WORD wDevID) |
| { |
| DWORD ret = MMSYSERR_NOERROR; |
| WINE_WAVEOUT* wwo; |
| |
| TRACE("(%u);\n", wDevID); |
| |
| if (wDevID >= MAX_WAVEOUTDRV || WOutDev[wDevID].unixdev == -1) { |
| WARN("bad device ID !\n"); |
| return MMSYSERR_BADDEVICEID; |
| } |
| |
| wwo = &WOutDev[wDevID]; |
| if (wwo->lpQueuePtr) { |
| WARN("buffers still playing !\n"); |
| ret = WAVERR_STILLPLAYING; |
| } else { |
| TRACE("imhere[3-close]\n"); |
| if (wwo->hEvent != INVALID_HANDLE_VALUE) { |
| wodPlayer_Message(wwo, WINE_WM_CLOSING, 0); |
| WaitForSingleObject(wwo->hEvent, INFINITE); |
| CloseHandle(wwo->hEvent); |
| } |
| if (wwo->mapping) { |
| munmap(wwo->mapping, wwo->maplen); |
| wwo->mapping = NULL; |
| } |
| |
| AudioIOClose(); |
| wwo->unixdev = -1; |
| wwo->dwFragmentSize = 0; |
| if (LIBAUDIOIO_NotifyClient(wDevID, WOM_CLOSE, 0L, 0L) != MMSYSERR_NOERROR) { |
| WARN("can't notify client !\n"); |
| ret = MMSYSERR_INVALPARAM; |
| } |
| } |
| return ret; |
| } |
| |
| /************************************************************************** |
| * wodWrite [internal] |
| * |
| */ |
| static DWORD wodWrite(WORD wDevID, LPWAVEHDR lpWaveHdr, DWORD dwSize) |
| { |
| TRACE("(%u, %p, %08lX);\n", wDevID, lpWaveHdr, dwSize); |
| |
| /* first, do the sanity checks... */ |
| if (wDevID >= MAX_WAVEOUTDRV || WOutDev[wDevID].unixdev == -1) { |
| WARN("bad dev ID !\n"); |
| return MMSYSERR_BADDEVICEID; |
| } |
| |
| if (lpWaveHdr->lpData == NULL || !(lpWaveHdr->dwFlags & WHDR_PREPARED)) |
| return WAVERR_UNPREPARED; |
| |
| if (lpWaveHdr->dwFlags & WHDR_INQUEUE) |
| return WAVERR_STILLPLAYING; |
| |
| lpWaveHdr->dwFlags &= ~WHDR_DONE; |
| lpWaveHdr->dwFlags |= WHDR_INQUEUE; |
| lpWaveHdr->lpNext = 0; |
| |
| TRACE("imhere[3-HEADER]\n"); |
| wodPlayer_Message(&WOutDev[wDevID], WINE_WM_HEADER, (DWORD)lpWaveHdr); |
| |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * wodPrepare [internal] |
| */ |
| static DWORD wodPrepare(WORD wDevID, LPWAVEHDR lpWaveHdr, DWORD dwSize) |
| { |
| TRACE("(%u, %p, %08lX);\n", wDevID, lpWaveHdr, dwSize); |
| |
| if (wDevID >= MAX_WAVEOUTDRV) { |
| WARN("bad device ID !\n"); |
| return MMSYSERR_BADDEVICEID; |
| } |
| |
| if (lpWaveHdr->dwFlags & WHDR_INQUEUE) |
| return WAVERR_STILLPLAYING; |
| |
| lpWaveHdr->dwFlags |= WHDR_PREPARED; |
| lpWaveHdr->dwFlags &= ~WHDR_DONE; |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * wodUnprepare [internal] |
| */ |
| static DWORD wodUnprepare(WORD wDevID, LPWAVEHDR lpWaveHdr, DWORD dwSize) |
| { |
| TRACE("(%u, %p, %08lX);\n", wDevID, lpWaveHdr, dwSize); |
| |
| if (wDevID >= MAX_WAVEOUTDRV) { |
| WARN("bad device ID !\n"); |
| return MMSYSERR_BADDEVICEID; |
| } |
| |
| if (lpWaveHdr->dwFlags & WHDR_INQUEUE) |
| return WAVERR_STILLPLAYING; |
| |
| lpWaveHdr->dwFlags &= ~WHDR_PREPARED; |
| lpWaveHdr->dwFlags |= WHDR_DONE; |
| |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * wodPause [internal] |
| */ |
| static DWORD wodPause(WORD wDevID) |
| { |
| TRACE("(%u);!\n", wDevID); |
| |
| if (wDevID >= MAX_WAVEOUTDRV || WOutDev[wDevID].unixdev == -1) { |
| WARN("bad device ID !\n"); |
| return MMSYSERR_BADDEVICEID; |
| } |
| |
| TRACE("imhere[3-PAUSING]\n"); |
| wodPlayer_Message(&WOutDev[wDevID], WINE_WM_PAUSING, 0); |
| WaitForSingleObject(WOutDev[wDevID].hEvent, INFINITE); |
| |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * wodRestart [internal] |
| */ |
| static DWORD wodRestart(WORD wDevID) |
| { |
| TRACE("(%u);\n", wDevID); |
| |
| if (wDevID >= MAX_WAVEOUTDRV || WOutDev[wDevID].unixdev == -1) { |
| WARN("bad device ID !\n"); |
| return MMSYSERR_BADDEVICEID; |
| } |
| |
| if (WOutDev[wDevID].state == WINE_WS_PAUSED) { |
| TRACE("imhere[3-RESTARTING]\n"); |
| wodPlayer_Message(&WOutDev[wDevID], WINE_WM_RESTARTING, 0); |
| WaitForSingleObject(WOutDev[wDevID].hEvent, INFINITE); |
| } |
| |
| /* FIXME: is NotifyClient with WOM_DONE right ? (Comet Busters 1.3.3 needs this notification) */ |
| /* FIXME: Myst crashes with this ... hmm -MM |
| if (LIBAUDIOIO_NotifyClient(wDevID, WOM_DONE, 0L, 0L) != MMSYSERR_NOERROR) { |
| WARN("can't notify client !\n"); |
| return MMSYSERR_INVALPARAM; |
| } |
| */ |
| |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * wodReset [internal] |
| */ |
| static DWORD wodReset(WORD wDevID) |
| { |
| TRACE("(%u);\n", wDevID); |
| |
| if (wDevID >= MAX_WAVEOUTDRV || WOutDev[wDevID].unixdev == -1) { |
| WARN("bad device ID !\n"); |
| return MMSYSERR_BADDEVICEID; |
| } |
| |
| TRACE("imhere[3-RESET]\n"); |
| wodPlayer_Message(&WOutDev[wDevID], WINE_WM_RESETTING, 0); |
| WaitForSingleObject(WOutDev[wDevID].hEvent, INFINITE); |
| |
| return MMSYSERR_NOERROR; |
| } |
| |
| |
| /************************************************************************** |
| * wodGetPosition [internal] |
| */ |
| static DWORD wodGetPosition(WORD wDevID, LPMMTIME lpTime, DWORD uSize) |
| { |
| int time; |
| DWORD val; |
| WINE_WAVEOUT* wwo; |
| |
| TRACE("(%u, %p, %lu);\n", wDevID, lpTime, uSize); |
| |
| if (wDevID >= MAX_WAVEOUTDRV || WOutDev[wDevID].unixdev == -1) { |
| WARN("bad device ID !\n"); |
| return MMSYSERR_BADDEVICEID; |
| } |
| |
| if (lpTime == NULL) return MMSYSERR_INVALPARAM; |
| |
| wwo = &WOutDev[wDevID]; |
| val = wwo->dwPlayedTotal; |
| |
| TRACE("wType=%04X wBitsPerSample=%u nSamplesPerSec=%lu nChannels=%u nAvgBytesPerSec=%lu\n", |
| lpTime->wType, wwo->format.wBitsPerSample, |
| wwo->format.wf.nSamplesPerSec, wwo->format.wf.nChannels, |
| wwo->format.wf.nAvgBytesPerSec); |
| TRACE("dwTotalPlayed=%lu\n", val); |
| |
| switch (lpTime->wType) { |
| case TIME_BYTES: |
| lpTime->u.cb = val; |
| TRACE("TIME_BYTES=%lu\n", lpTime->u.cb); |
| break; |
| case TIME_SAMPLES: |
| lpTime->u.sample = val * 8 / wwo->format.wBitsPerSample; |
| TRACE("TIME_SAMPLES=%lu\n", lpTime->u.sample); |
| break; |
| case TIME_SMPTE: |
| time = val / (wwo->format.wf.nAvgBytesPerSec / 1000); |
| lpTime->u.smpte.hour = time / 108000; |
| time -= lpTime->u.smpte.hour * 108000; |
| lpTime->u.smpte.min = time / 1800; |
| time -= lpTime->u.smpte.min * 1800; |
| lpTime->u.smpte.sec = time / 30; |
| time -= lpTime->u.smpte.sec * 30; |
| lpTime->u.smpte.frame = time; |
| lpTime->u.smpte.fps = 30; |
| TRACE("TIME_SMPTE=%02u:%02u:%02u:%02u\n", |
| lpTime->u.smpte.hour, lpTime->u.smpte.min, |
| lpTime->u.smpte.sec, lpTime->u.smpte.frame); |
| break; |
| default: |
| FIXME("Format %d not supported ! use TIME_MS !\n", lpTime->wType); |
| lpTime->wType = TIME_MS; |
| case TIME_MS: |
| lpTime->u.ms = val / (wwo->format.wf.nAvgBytesPerSec / 1000); |
| TRACE("TIME_MS=%lu\n", lpTime->u.ms); |
| break; |
| } |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * wodGetVolume [internal] |
| */ |
| static DWORD wodGetVolume(WORD wDevID, LPDWORD lpdwVol) |
| { |
| int mixer; |
| int vol,bal; |
| DWORD left, right; |
| |
| TRACE("(%u, %p);\n", wDevID, lpdwVol); |
| |
| if (lpdwVol == NULL) |
| return MMSYSERR_NOTENABLED; |
| |
| vol=AudioIOGetPlaybackVolume(); |
| bal=AudioIOGetPlaybackBalance(); |
| |
| |
| if(bal<0) { |
| left = vol; |
| right=-(vol*(-100+bal)/100); |
| } |
| else |
| { |
| right = vol; |
| left=(vol*(100-bal)/100); |
| } |
| |
| *lpdwVol = ((left * 0xFFFFl) / 100) + (((right * 0xFFFFl) / 100) << 16); |
| return MMSYSERR_NOERROR; |
| } |
| |
| |
| /************************************************************************** |
| * wodSetVolume [internal] |
| */ |
| static DWORD wodSetVolume(WORD wDevID, DWORD dwParam) |
| { |
| int mixer; |
| int volume,bal; |
| DWORD left, right; |
| |
| TRACE("(%u, %08lX);\n", wDevID, dwParam); |
| |
| left = (LOWORD(dwParam) * 100) / 0xFFFFl; |
| right = (HIWORD(dwParam) * 100) / 0xFFFFl; |
| volume = max(left , right ); |
| bal=min(left,right); |
| bal=bal*100/volume; |
| if(right>left) bal=-100+bal; else bal=100-bal; |
| |
| AudioIOSetPlaybackVolume(volume); |
| AudioIOSetPlaybackBalance(bal); |
| |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * wodGetNumDevs [internal] |
| */ |
| static DWORD wodGetNumDevs(void) |
| { |
| DWORD ret = 1; |
| |
| /* FIXME: For now, only one sound device (SOUND_DEV) is allowed */ |
| int audio = open(SOUND_DEV, O_WRONLY|O_NDELAY, 0); |
| |
| if (audio == -1) { |
| if (errno != EBUSY) |
| ret = 0; |
| } else { |
| close(audio); |
| |
| } |
| TRACE("NumDrivers = %d\n",ret); |
| return ret; |
| } |
| |
| /************************************************************************** |
| * wodMessage (WINEAUDIOIO.@) |
| */ |
| DWORD WINAPI LIBAUDIOIO_wodMessage(UINT wDevID, UINT wMsg, DWORD dwUser, |
| DWORD dwParam1, DWORD dwParam2) |
| { |
| TRACE("(%u, %04X, %08lX, %08lX, %08lX);\n", |
| wDevID, wMsg, dwUser, dwParam1, dwParam2); |
| |
| switch (wMsg) { |
| case DRVM_INIT: |
| case DRVM_EXIT: |
| case DRVM_ENABLE: |
| case DRVM_DISABLE: |
| /* FIXME: Pretend this is supported */ |
| return 0; |
| case WODM_OPEN: return wodOpen (wDevID, (LPWAVEOPENDESC)dwParam1, dwParam2); |
| case WODM_CLOSE: return wodClose (wDevID); |
| case WODM_WRITE: return wodWrite (wDevID, (LPWAVEHDR)dwParam1, dwParam2); |
| case WODM_PAUSE: return wodPause (wDevID); |
| case WODM_GETPOS: return wodGetPosition (wDevID, (LPMMTIME)dwParam1, dwParam2); |
| case WODM_BREAKLOOP: return MMSYSERR_NOTSUPPORTED; |
| case WODM_PREPARE: return wodPrepare (wDevID, (LPWAVEHDR)dwParam1, dwParam2); |
| case WODM_UNPREPARE: return wodUnprepare (wDevID, (LPWAVEHDR)dwParam1, dwParam2); |
| case WODM_GETDEVCAPS: return wodGetDevCaps (wDevID, (LPWAVEOUTCAPSA)dwParam1, dwParam2); |
| case WODM_GETNUMDEVS: return wodGetNumDevs (); |
| case WODM_GETPITCH: return MMSYSERR_NOTSUPPORTED; |
| case WODM_SETPITCH: return MMSYSERR_NOTSUPPORTED; |
| case WODM_GETPLAYBACKRATE: return MMSYSERR_NOTSUPPORTED; |
| case WODM_SETPLAYBACKRATE: return MMSYSERR_NOTSUPPORTED; |
| case WODM_GETVOLUME: return wodGetVolume (wDevID, (LPDWORD)dwParam1); |
| case WODM_SETVOLUME: return wodSetVolume (wDevID, dwParam1); |
| case WODM_RESTART: return wodRestart (wDevID); |
| case WODM_RESET: return wodReset (wDevID); |
| |
| case DRV_QUERYDSOUNDIFACE: return wodDsCreate(wDevID, (PIDSDRIVER*)dwParam1); |
| default: |
| FIXME("unknown message %d!\n", wMsg); |
| } |
| return MMSYSERR_NOTSUPPORTED; |
| } |
| |
| /*======================================================================* |
| * Low level DSOUND implementation * |
| * While I have tampered somewhat with this code it is wholely unlikely that it works |
| * Elsewhere the driver returns Not Implemented for DIrectSound |
| * While it may be possible to map the sound device on Solaris |
| * Doing so would bypass the libaudioio library and therefore break any conversions |
| * that the libaudioio sample specification converter is doing |
| * **** All this is untested so far |
| *======================================================================*/ |
| |
| typedef struct IDsDriverImpl IDsDriverImpl; |
| typedef struct IDsDriverBufferImpl IDsDriverBufferImpl; |
| |
| struct IDsDriverImpl |
| { |
| /* IUnknown fields */ |
| ICOM_VFIELD(IDsDriver); |
| DWORD ref; |
| /* IDsDriverImpl fields */ |
| UINT wDevID; |
| IDsDriverBufferImpl*primary; |
| }; |
| |
| struct IDsDriverBufferImpl |
| { |
| /* IUnknown fields */ |
| ICOM_VFIELD(IDsDriverBuffer); |
| DWORD ref; |
| /* IDsDriverBufferImpl fields */ |
| IDsDriverImpl* drv; |
| DWORD buflen; |
| }; |
| |
| static HRESULT DSDB_MapPrimary(IDsDriverBufferImpl *dsdb) |
| { |
| WINE_WAVEOUT *wwo = &(WOutDev[dsdb->drv->wDevID]); |
| if (!wwo->mapping) { |
| wwo->mapping = mmap(NULL, wwo->maplen, PROT_WRITE, MAP_SHARED, |
| wwo->unixdev, 0); |
| if (wwo->mapping == (LPBYTE)-1) { |
| ERR("(%p): Could not map sound device for direct access (errno=%d)\n", dsdb, errno); |
| return DSERR_GENERIC; |
| } |
| TRACE("(%p): sound device has been mapped for direct access at %p, size=%ld\n", dsdb, wwo->mapping, wwo->maplen); |
| |
| /* for some reason, es1371 and sblive! sometimes have junk in here. */ |
| memset(wwo->mapping,0,wwo->maplen); /* clear it, or we get junk noise */ |
| } |
| return DS_OK; |
| } |
| |
| static HRESULT DSDB_UnmapPrimary(IDsDriverBufferImpl *dsdb) |
| { |
| WINE_WAVEOUT *wwo = &(WOutDev[dsdb->drv->wDevID]); |
| if (wwo->mapping) { |
| if (munmap(wwo->mapping, wwo->maplen) < 0) { |
| ERR("(%p): Could not unmap sound device (errno=%d)\n", dsdb, errno); |
| return DSERR_GENERIC; |
| } |
| wwo->mapping = NULL; |
| TRACE("(%p): sound device unmapped\n", dsdb); |
| } |
| return DS_OK; |
| } |
| |
| static HRESULT WINAPI IDsDriverBufferImpl_QueryInterface(PIDSDRIVERBUFFER iface, REFIID riid, LPVOID *ppobj) |
| { |
| /* ICOM_THIS(IDsDriverBufferImpl,iface); */ |
| FIXME("(): stub!\n"); |
| return DSERR_UNSUPPORTED; |
| } |
| |
| static ULONG WINAPI IDsDriverBufferImpl_AddRef(PIDSDRIVERBUFFER iface) |
| { |
| ICOM_THIS(IDsDriverBufferImpl,iface); |
| This->ref++; |
| return This->ref; |
| } |
| |
| static ULONG WINAPI IDsDriverBufferImpl_Release(PIDSDRIVERBUFFER iface) |
| { |
| ICOM_THIS(IDsDriverBufferImpl,iface); |
| if (--This->ref) |
| return This->ref; |
| if (This == This->drv->primary) |
| This->drv->primary = NULL; |
| DSDB_UnmapPrimary(This); |
| HeapFree(GetProcessHeap(),0,This); |
| return 0; |
| } |
| |
| static HRESULT WINAPI IDsDriverBufferImpl_Lock(PIDSDRIVERBUFFER iface, |
| LPVOID*ppvAudio1,LPDWORD pdwLen1, |
| LPVOID*ppvAudio2,LPDWORD pdwLen2, |
| DWORD dwWritePosition,DWORD dwWriteLen, |
| DWORD dwFlags) |
| { |
| /* ICOM_THIS(IDsDriverBufferImpl,iface); */ |
| /* since we (GetDriverDesc flags) have specified DSDDESC_DONTNEEDPRIMARYLOCK, |
| * and that we don't support secondary buffers, this method will never be called */ |
| TRACE("(%p): stub\n",iface); |
| return DSERR_UNSUPPORTED; |
| } |
| |
| static HRESULT WINAPI IDsDriverBufferImpl_Unlock(PIDSDRIVERBUFFER iface, |
| LPVOID pvAudio1,DWORD dwLen1, |
| LPVOID pvAudio2,DWORD dwLen2) |
| { |
| /* ICOM_THIS(IDsDriverBufferImpl,iface); */ |
| TRACE("(%p): stub\n",iface); |
| return DSERR_UNSUPPORTED; |
| } |
| |
| static HRESULT WINAPI IDsDriverBufferImpl_SetFormat(PIDSDRIVERBUFFER iface, |
| LPWAVEFORMATEX pwfx) |
| { |
| /* ICOM_THIS(IDsDriverBufferImpl,iface); */ |
| |
| TRACE("(%p,%p)\n",iface,pwfx); |
| /* On our request (GetDriverDesc flags), DirectSound has by now used |
| * waveOutClose/waveOutOpen to set the format... |
| * unfortunately, this means our mmap() is now gone... |
| * so we need to somehow signal to our DirectSound implementation |
| * that it should completely recreate this HW buffer... |
| * this unexpected error code should do the trick... */ |
| return DSERR_BUFFERLOST; |
| } |
| |
| static HRESULT WINAPI IDsDriverBufferImpl_SetFrequency(PIDSDRIVERBUFFER iface, DWORD dwFreq) |
| { |
| /* ICOM_THIS(IDsDriverBufferImpl,iface); */ |
| TRACE("(%p,%ld): stub\n",iface,dwFreq); |
| return DSERR_UNSUPPORTED; |
| } |
| |
| static HRESULT WINAPI IDsDriverBufferImpl_SetVolumePan(PIDSDRIVERBUFFER iface, PDSVOLUMEPAN pVolPan) |
| { |
| /* ICOM_THIS(IDsDriverBufferImpl,iface); */ |
| FIXME("(%p,%p): stub!\n",iface,pVolPan); |
| return DSERR_UNSUPPORTED; |
| } |
| |
| static HRESULT WINAPI IDsDriverBufferImpl_SetPosition(PIDSDRIVERBUFFER iface, DWORD dwNewPos) |
| { |
| /* ICOM_THIS(IDsDriverImpl,iface); */ |
| TRACE("(%p,%ld): stub\n",iface,dwNewPos); |
| return DSERR_UNSUPPORTED; |
| } |
| |
| static HRESULT WINAPI IDsDriverBufferImpl_GetPosition(PIDSDRIVERBUFFER iface, |
| LPDWORD lpdwPlay, LPDWORD lpdwWrite) |
| { |
| ICOM_THIS(IDsDriverBufferImpl,iface); |
| #if 0 |
| count_info info; |
| #endif |
| DWORD ptr; |
| |
| TRACE("(%p)\n",iface); |
| if (WOutDev[This->drv->wDevID].unixdev == -1) { |
| ERR("device not open, but accessing?\n"); |
| return DSERR_UNINITIALIZED; |
| } |
| /*Libaudioio doesn't support this (Yet anyway)*/ |
| return DSERR_UNSUPPORTED; |
| |
| } |
| |
| static HRESULT WINAPI IDsDriverBufferImpl_Play(PIDSDRIVERBUFFER iface, DWORD dwRes1, DWORD dwRes2, DWORD dwFlags) |
| { |
| ICOM_THIS(IDsDriverBufferImpl,iface); |
| #if 0 |
| int enable = PCM_ENABLE_OUTPUT; |
| TRACE("(%p,%lx,%lx,%lx)\n",iface,dwRes1,dwRes2,dwFlags); |
| if (ioctl(WOutDev[This->drv->wDevID].unixdev, SNDCTL_DSP_SETTRIGGER, &enable) < 0) { |
| ERR("ioctl failed (%d)\n", errno); |
| return DSERR_GENERIC; |
| } |
| #endif |
| return DS_OK; |
| } |
| |
| static HRESULT WINAPI IDsDriverBufferImpl_Stop(PIDSDRIVERBUFFER iface) |
| { |
| ICOM_THIS(IDsDriverBufferImpl,iface); |
| int enable = 0; |
| #if 0 |
| TRACE("(%p)\n",iface); |
| /* no more playing */ |
| if (ioctl(WOutDev[This->drv->wDevID].unixdev, SNDCTL_DSP_SETTRIGGER, &enable) < 0) { |
| ERR("ioctl failed (%d)\n", errno); |
| return DSERR_GENERIC; |
| } |
| #endif |
| #if 0 |
| /* the play position must be reset to the beginning of the buffer */ |
| if (ioctl(WOutDev[This->drv->wDevID].unixdev, SNDCTL_DSP_RESET, 0) < 0) { |
| ERR("ioctl failed (%d)\n", errno); |
| return DSERR_GENERIC; |
| } |
| #endif |
| /* Most OSS drivers just can't stop the playback without closing the device... |
| * so we need to somehow signal to our DirectSound implementation |
| * that it should completely recreate this HW buffer... |
| * this unexpected error code should do the trick... */ |
| return DSERR_BUFFERLOST; |
| } |
| |
| static ICOM_VTABLE(IDsDriverBuffer) dsdbvt = |
| { |
| ICOM_MSVTABLE_COMPAT_DummyRTTIVALUE |
| IDsDriverBufferImpl_QueryInterface, |
| IDsDriverBufferImpl_AddRef, |
| IDsDriverBufferImpl_Release, |
| IDsDriverBufferImpl_Lock, |
| IDsDriverBufferImpl_Unlock, |
| IDsDriverBufferImpl_SetFormat, |
| IDsDriverBufferImpl_SetFrequency, |
| IDsDriverBufferImpl_SetVolumePan, |
| IDsDriverBufferImpl_SetPosition, |
| IDsDriverBufferImpl_GetPosition, |
| IDsDriverBufferImpl_Play, |
| IDsDriverBufferImpl_Stop |
| }; |
| |
| static HRESULT WINAPI IDsDriverImpl_QueryInterface(PIDSDRIVER iface, REFIID riid, LPVOID *ppobj) |
| { |
| /* ICOM_THIS(IDsDriverImpl,iface); */ |
| FIXME("(%p): stub!\n",iface); |
| return DSERR_UNSUPPORTED; |
| } |
| |
| static ULONG WINAPI IDsDriverImpl_AddRef(PIDSDRIVER iface) |
| { |
| ICOM_THIS(IDsDriverImpl,iface); |
| This->ref++; |
| return This->ref; |
| } |
| |
| static ULONG WINAPI IDsDriverImpl_Release(PIDSDRIVER iface) |
| { |
| ICOM_THIS(IDsDriverImpl,iface); |
| if (--This->ref) |
| return This->ref; |
| HeapFree(GetProcessHeap(),0,This); |
| return 0; |
| } |
| |
| static HRESULT WINAPI IDsDriverImpl_GetDriverDesc(PIDSDRIVER iface, PDSDRIVERDESC pDesc) |
| { |
| ICOM_THIS(IDsDriverImpl,iface); |
| TRACE("(%p,%p)\n",iface,pDesc); |
| pDesc->dwFlags = DSDDESC_DOMMSYSTEMOPEN | DSDDESC_DOMMSYSTEMSETFORMAT | |
| DSDDESC_USESYSTEMMEMORY | DSDDESC_DONTNEEDPRIMARYLOCK; |
| strcpy(pDesc->szDesc,"WineOSS DirectSound Driver"); |
| strcpy(pDesc->szDrvName,"wineoss.drv"); |
| pDesc->dnDevNode = WOutDev[This->wDevID].waveDesc.dnDevNode; |
| pDesc->wVxdId = 0; |
| pDesc->wReserved = 0; |
| pDesc->ulDeviceNum = This->wDevID; |
| pDesc->dwHeapType = DSDHEAP_NOHEAP; |
| pDesc->pvDirectDrawHeap = NULL; |
| pDesc->dwMemStartAddress = 0; |
| pDesc->dwMemEndAddress = 0; |
| pDesc->dwMemAllocExtra = 0; |
| pDesc->pvReserved1 = NULL; |
| pDesc->pvReserved2 = NULL; |
| return DS_OK; |
| } |
| |
| static HRESULT WINAPI IDsDriverImpl_Open(PIDSDRIVER iface) |
| { |
| ICOM_THIS(IDsDriverImpl,iface); |
| int enable = 0; |
| |
| TRACE("(%p)\n",iface); |
| /* make sure the card doesn't start playing before we want it to */ |
| #if 0 |
| if (ioctl(WOutDev[This->wDevID].unixdev, SNDCTL_DSP_SETTRIGGER, &enable) < 0) { |
| ERR("ioctl failed (%d)\n", errno); |
| return DSERR_GENERIC; |
| } |
| #endif |
| return DS_OK; |
| } |
| |
| static HRESULT WINAPI IDsDriverImpl_Close(PIDSDRIVER iface) |
| { |
| ICOM_THIS(IDsDriverImpl,iface); |
| TRACE("(%p)\n",iface); |
| if (This->primary) { |
| ERR("problem with DirectSound: primary not released\n"); |
| return DSERR_GENERIC; |
| } |
| return DS_OK; |
| } |
| |
| static HRESULT WINAPI IDsDriverImpl_GetCaps(PIDSDRIVER iface, PDSDRIVERCAPS pCaps) |
| { |
| /* ICOM_THIS(IDsDriverImpl,iface); */ |
| TRACE("(%p,%p)\n",iface,pCaps); |
| memset(pCaps, 0, sizeof(*pCaps)); |
| /* FIXME: need to check actual capabilities */ |
| pCaps->dwFlags = DSCAPS_PRIMARYMONO | DSCAPS_PRIMARYSTEREO | |
| DSCAPS_PRIMARY8BIT | DSCAPS_PRIMARY16BIT; |
| pCaps->dwPrimaryBuffers = 1; |
| /* the other fields only apply to secondary buffers, which we don't support |
| * (unless we want to mess with wavetable synthesizers and MIDI) */ |
| return DS_OK; |
| } |
| |
| static HRESULT WINAPI IDsDriverImpl_CreateSoundBuffer(PIDSDRIVER iface, |
| LPWAVEFORMATEX pwfx, |
| DWORD dwFlags, DWORD dwCardAddress, |
| LPDWORD pdwcbBufferSize, |
| LPBYTE *ppbBuffer, |
| LPVOID *ppvObj) |
| { |
| ICOM_THIS(IDsDriverImpl,iface); |
| IDsDriverBufferImpl** ippdsdb = (IDsDriverBufferImpl**)ppvObj; |
| HRESULT err; |
| #if 0 |
| audio_buf_info info; |
| #endif |
| int enable = 0; |
| |
| TRACE("(%p,%p,%lx,%lx)\n",iface,pwfx,dwFlags,dwCardAddress); |
| /* we only support primary buffers */ |
| if (!(dwFlags & DSBCAPS_PRIMARYBUFFER)) |
| return DSERR_UNSUPPORTED; |
| if (This->primary) |
| return DSERR_ALLOCATED; |
| if (dwFlags & (DSBCAPS_CTRLFREQUENCY | DSBCAPS_CTRLPAN)) |
| return DSERR_CONTROLUNAVAIL; |
| |
| *ippdsdb = (IDsDriverBufferImpl*)HeapAlloc(GetProcessHeap(),0,sizeof(IDsDriverBufferImpl)); |
| if (*ippdsdb == NULL) |
| return DSERR_OUTOFMEMORY; |
| ICOM_VTBL(*ippdsdb) = &dsdbvt; |
| (*ippdsdb)->ref = 1; |
| (*ippdsdb)->drv = This; |
| |
| /* check how big the DMA buffer is now */ |
| #if 0 |
| if (ioctl(WOutDev[This->wDevID].unixdev, SNDCTL_DSP_GETOSPACE, &info) < 0) { |
| ERR("ioctl failed (%d)\n", errno); |
| HeapFree(GetProcessHeap(),0,*ippdsdb); |
| *ippdsdb = NULL; |
| return DSERR_GENERIC; |
| } |
| #endif |
| WOutDev[This->wDevID].maplen =64*1024; /* Map 64 K at a time */ |
| |
| #if 0 |
| (*ippdsdb)->buflen = info.fragstotal * info.fragsize; |
| #endif |
| /* map the DMA buffer */ |
| err = DSDB_MapPrimary(*ippdsdb); |
| if (err != DS_OK) { |
| HeapFree(GetProcessHeap(),0,*ippdsdb); |
| *ippdsdb = NULL; |
| return err; |
| } |
| |
| /* primary buffer is ready to go */ |
| *pdwcbBufferSize = WOutDev[This->wDevID].maplen; |
| *ppbBuffer = WOutDev[This->wDevID].mapping; |
| |
| /* some drivers need some extra nudging after mapping */ |
| #if 0 |
| if (ioctl(WOutDev[This->wDevID].unixdev, SNDCTL_DSP_SETTRIGGER, &enable) < 0) { |
| ERR("ioctl failed (%d)\n", errno); |
| return DSERR_GENERIC; |
| } |
| #endif |
| |
| This->primary = *ippdsdb; |
| |
| return DS_OK; |
| } |
| |
| static HRESULT WINAPI IDsDriverImpl_DuplicateSoundBuffer(PIDSDRIVER iface, |
| PIDSDRIVERBUFFER pBuffer, |
| LPVOID *ppvObj) |
| { |
| /* ICOM_THIS(IDsDriverImpl,iface); */ |
| TRACE("(%p,%p): stub\n",iface,pBuffer); |
| return DSERR_INVALIDCALL; |
| } |
| |
| static ICOM_VTABLE(IDsDriver) dsdvt = |
| { |
| ICOM_MSVTABLE_COMPAT_DummyRTTIVALUE |
| IDsDriverImpl_QueryInterface, |
| IDsDriverImpl_AddRef, |
| IDsDriverImpl_Release, |
| IDsDriverImpl_GetDriverDesc, |
| IDsDriverImpl_Open, |
| IDsDriverImpl_Close, |
| IDsDriverImpl_GetCaps, |
| IDsDriverImpl_CreateSoundBuffer, |
| IDsDriverImpl_DuplicateSoundBuffer |
| }; |
| |
| static DWORD wodDsCreate(UINT wDevID, PIDSDRIVER* drv) |
| { |
| IDsDriverImpl** idrv = (IDsDriverImpl**)drv; |
| |
| /* the HAL isn't much better than the HEL if we can't do mmap() */ |
| if (!(WOutDev[wDevID].caps.dwSupport & WAVECAPS_DIRECTSOUND)) { |
| ERR("DirectSound flag not set\n"); |
| MESSAGE("This sound card's driver does not support direct access\n"); |
| MESSAGE("The (slower) DirectSound HEL mode will be used instead.\n"); |
| return MMSYSERR_NOTSUPPORTED; |
| } |
| |
| *idrv = (IDsDriverImpl*)HeapAlloc(GetProcessHeap(),0,sizeof(IDsDriverImpl)); |
| if (!*idrv) |
| return MMSYSERR_NOMEM; |
| ICOM_VTBL(*idrv) = &dsdvt; |
| (*idrv)->ref = 1; |
| |
| (*idrv)->wDevID = wDevID; |
| (*idrv)->primary = NULL; |
| return MMSYSERR_NOERROR; |
| } |
| |
| /*======================================================================* |
| * Low level WAVE IN implementation * |
| *======================================================================*/ |
| |
| /************************************************************************** |
| * widGetDevCaps [internal] |
| */ |
| static DWORD widGetDevCaps(WORD wDevID, LPWAVEINCAPSA lpCaps, DWORD dwSize) |
| { |
| TRACE("(%u, %p, %lu);\n", wDevID, lpCaps, dwSize); |
| |
| if (lpCaps == NULL) return MMSYSERR_NOTENABLED; |
| |
| if (wDevID >= MAX_WAVEINDRV) { |
| TRACE("MAX_WAVINDRV reached !\n"); |
| return MMSYSERR_BADDEVICEID; |
| } |
| |
| memcpy(lpCaps, &WInDev[wDevID].caps, min(dwSize, sizeof(*lpCaps))); |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * widRecorder [internal] |
| */ |
| static DWORD CALLBACK widRecorder(LPVOID pmt) |
| { |
| WORD uDevID = (DWORD)pmt; |
| WINE_WAVEIN* wwi = (WINE_WAVEIN*)&WInDev[uDevID]; |
| WAVEHDR* lpWaveHdr; |
| DWORD dwSleepTime; |
| MSG msg; |
| DWORD bytesRead; |
| |
| |
| int fragments; |
| int fragsize; |
| int fragstotal; |
| int bytes; |
| |
| |
| int xs; |
| |
| LPVOID buffer = HeapAlloc(GetProcessHeap(), |
| HEAP_ZERO_MEMORY, |
| wwi->dwFragmentSize); |
| |
| LPVOID pOffset = buffer; |
| |
| PeekMessageA(&msg, 0, 0, 0, 0); |
| wwi->state = WINE_WS_STOPPED; |
| wwi->dwTotalRecorded = 0; |
| |
| SetEvent(wwi->hEvent); |
| |
| |
| /* make sleep time to be # of ms to output a fragment */ |
| dwSleepTime = (wwi->dwFragmentSize * 1000) / wwi->format.wf.nAvgBytesPerSec; |
| TRACE("sleeptime=%ld ms\n", dwSleepTime); |
| |
| for (; ; ) { |
| /* wait for dwSleepTime or an event in thread's queue */ |
| /* FIXME: could improve wait time depending on queue state, |
| * ie, number of queued fragments |
| */ |
| |
| if (wwi->lpQueuePtr != NULL && wwi->state == WINE_WS_PLAYING) |
| { |
| lpWaveHdr = wwi->lpQueuePtr; |
| |
| bytes=fragsize=AudioIORecordingAvailable(); |
| fragments=fragstotal=1; |
| |
| TRACE("info={frag=%d fsize=%d ftotal=%d bytes=%d}\n", fragments, fragsize, fragstotal, bytes); |
| |
| |
| /* read all the fragments accumulated so far */ |
| while ((fragments > 0) && (wwi->lpQueuePtr)) |
| { |
| fragments --; |
| |
| if (lpWaveHdr->dwBufferLength - lpWaveHdr->dwBytesRecorded >= wwi->dwFragmentSize) |
| { |
| /* directly read fragment in wavehdr */ |
| bytesRead = AudioIORead( |
| lpWaveHdr->lpData + lpWaveHdr->dwBytesRecorded, |
| wwi->dwFragmentSize); |
| |
| TRACE("bytesRead=%ld (direct)\n", bytesRead); |
| if (bytesRead != (DWORD) -1) |
| { |
| /* update number of bytes recorded in current buffer and by this device */ |
| lpWaveHdr->dwBytesRecorded += bytesRead; |
| wwi->dwTotalRecorded += bytesRead; |
| |
| /* buffer is full. notify client */ |
| if (lpWaveHdr->dwBytesRecorded == lpWaveHdr->dwBufferLength) |
| { |
| /* must copy the value of next waveHdr, because we have no idea of what |
| * will be done with the content of lpWaveHdr in callback |
| */ |
| LPWAVEHDR lpNext = lpWaveHdr->lpNext; |
| |
| lpWaveHdr->dwFlags &= ~WHDR_INQUEUE; |
| lpWaveHdr->dwFlags |= WHDR_DONE; |
| |
| if (LIBAUDIOIO_NotifyClient(uDevID, WIM_DATA, |
| (DWORD)lpWaveHdr, 0) != MMSYSERR_NOERROR) |
| { |
| WARN("can't notify client !\n"); |
| } |
| lpWaveHdr = wwi->lpQueuePtr = lpNext; |
| } |
| } |
| } |
| else |
| { |
| /* read the fragment in a local buffer */ |
| bytesRead = AudioIORead( buffer, wwi->dwFragmentSize); |
| pOffset = buffer; |
| |
| TRACE("bytesRead=%ld (local)\n", bytesRead); |
| |
| /* copy data in client buffers */ |
| while (bytesRead != (DWORD) -1 && bytesRead > 0) |
| { |
| DWORD dwToCopy = min (bytesRead, lpWaveHdr->dwBufferLength - lpWaveHdr->dwBytesRecorded); |
| |
| memcpy(lpWaveHdr->lpData + lpWaveHdr->dwBytesRecorded, |
| pOffset, |
| dwToCopy); |
| |
| /* update number of bytes recorded in current buffer and by this device */ |
| lpWaveHdr->dwBytesRecorded += dwToCopy; |
| wwi->dwTotalRecorded += dwToCopy; |
| bytesRead -= dwToCopy; |
| pOffset += dwToCopy; |
| |
| /* client buffer is full. notify client */ |
| if (lpWaveHdr->dwBytesRecorded == lpWaveHdr->dwBufferLength) |
| { |
| /* must copy the value of next waveHdr, because we have no idea of what |
| * will be done with the content of lpWaveHdr in callback |
| */ |
| LPWAVEHDR lpNext = lpWaveHdr->lpNext; |
| TRACE("lpNext=%p\n", lpNext); |
| |
| lpWaveHdr->dwFlags &= ~WHDR_INQUEUE; |
| lpWaveHdr->dwFlags |= WHDR_DONE; |
| |
| if (LIBAUDIOIO_NotifyClient(uDevID, WIM_DATA, |
| (DWORD)lpWaveHdr, 0) != MMSYSERR_NOERROR) |
| { |
| WARN("can't notify client !\n"); |
| } |
| |
| wwi->lpQueuePtr = lpWaveHdr = lpNext; |
| if (!lpNext && bytesRead) { |
| /* no more buffer to copy data to, but we did read more. |
| * what hasn't been copied will be dropped |
| */ |
| WARN("buffer under run! %lu bytes dropped.\n", bytesRead); |
| wwi->lpQueuePtr = NULL; |
| break; |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| MsgWaitForMultipleObjects(0, NULL, FALSE, dwSleepTime, QS_POSTMESSAGE); |
| |
| while (PeekMessageA(&msg, 0, WINE_WM_FIRST, WINE_WM_LAST, PM_REMOVE)) { |
| |
| TRACE("msg=0x%x wParam=0x%x lParam=0x%lx\n", msg.message, msg.wParam, msg.lParam); |
| switch (msg.message) { |
| case WINE_WM_PAUSING: |
| wwi->state = WINE_WS_PAUSED; |
| |
| AudioIORecordingPause(); |
| SetEvent(wwi->hEvent); |
| break; |
| case WINE_WM_RESTARTING: |
| { |
| |
| wwi->state = WINE_WS_PLAYING; |
| |
| if (wwi->bTriggerSupport) |
| { |
| /* start the recording */ |
| AudioIORecordingResume(); |
| } |
| else |
| { |
| unsigned char data[4]; |
| /* read 4 bytes to start the recording */ |
| AudioIORead( data, 4); |
| } |
| |
| SetEvent(wwi->hEvent); |
| break; |
| } |
| case WINE_WM_HEADER: |
| lpWaveHdr = (LPWAVEHDR)msg.lParam; |
| lpWaveHdr->lpNext = 0; |
| |
| /* insert buffer at the end of queue */ |
| { |
| LPWAVEHDR* wh; |
| for (wh = &(wwi->lpQueuePtr); *wh; wh = &((*wh)->lpNext)); |
| *wh = lpWaveHdr; |
| } |
| break; |
| case WINE_WM_RESETTING: |
| wwi->state = WINE_WS_STOPPED; |
| /* return all buffers to the app */ |
| for (lpWaveHdr = wwi->lpQueuePtr; lpWaveHdr; lpWaveHdr = lpWaveHdr->lpNext) { |
| TRACE("reset %p %p\n", lpWaveHdr, lpWaveHdr->lpNext); |
| lpWaveHdr->dwFlags &= ~WHDR_INQUEUE; |
| lpWaveHdr->dwFlags |= WHDR_DONE; |
| |
| if (LIBAUDIOIO_NotifyClient(uDevID, WIM_DATA, |
| (DWORD)lpWaveHdr, 0) != MMSYSERR_NOERROR) { |
| WARN("can't notify client !\n"); |
| } |
| } |
| wwi->lpQueuePtr = NULL; |
| SetEvent(wwi->hEvent); |
| break; |
| case WINE_WM_CLOSING: |
| wwi->hThread = 0; |
| wwi->state = WINE_WS_CLOSED; |
| SetEvent(wwi->hEvent); |
| HeapFree(GetProcessHeap(), 0, buffer); |
| ExitThread(0); |
| /* shouldn't go here */ |
| default: |
| FIXME("unknown message %d\n", msg.message); |
| break; |
| } |
| } |
| } |
| ExitThread(0); |
| /* just for not generating compilation warnings... should never be executed */ |
| return 0; |
| } |
| |
| |
| /************************************************************************** |
| * widOpen [internal] |
| */ |
| static DWORD widOpen(WORD wDevID, LPWAVEOPENDESC lpDesc, DWORD dwFlags) |
| { |
| int audio; |
| int fragment_size; |
| int sample_rate; |
| int format; |
| int dsp_stereo; |
| WINE_WAVEIN* wwi; |
| int audio_fragment; |
| |
| TRACE("(%u, %p, %08lX);\n", wDevID, lpDesc, dwFlags); |
| if (lpDesc == NULL) { |
| WARN("Invalid Parameter !\n"); |
| return MMSYSERR_INVALPARAM; |
| } |
| if (wDevID >= MAX_WAVEINDRV) return MMSYSERR_BADDEVICEID; |
| |
| /* only PCM format is supported so far... */ |
| if (lpDesc->lpFormat->wFormatTag != WAVE_FORMAT_PCM || |
| lpDesc->lpFormat->nChannels == 0 || |
| lpDesc->lpFormat->nSamplesPerSec == 0) { |
| WARN("Bad format: tag=%04X nChannels=%d nSamplesPerSec=%ld !\n", |
| lpDesc->lpFormat->wFormatTag, lpDesc->lpFormat->nChannels, |
| lpDesc->lpFormat->nSamplesPerSec); |
| return WAVERR_BADFORMAT; |
| } |
| |
| if (dwFlags & WAVE_FORMAT_QUERY) { |
| TRACE("Query format: tag=%04X nChannels=%d nSamplesPerSec=%ld !\n", |
| lpDesc->lpFormat->wFormatTag, lpDesc->lpFormat->nChannels, |
| lpDesc->lpFormat->nSamplesPerSec); |
| return MMSYSERR_NOERROR; |
| } |
| |
| if (access(SOUND_DEV,0) != 0) return MMSYSERR_NOTENABLED; |
| audio = AudioIOOpenX( O_RDONLY|O_NDELAY, &spec[RECORD],&spec[RECORD]); |
| if (audio == -1) { |
| WARN("can't open sound device %s (%s)!\n", SOUND_DEV, strerror(errno)); |
| return MMSYSERR_ALLOCATED; |
| } |
| fcntl(audio, F_SETFD, 1); /* set close on exec flag */ |
| |
| wwi = &WInDev[wDevID]; |
| if (wwi->lpQueuePtr) { |
| WARN("Should have an empty queue (%p)\n", wwi->lpQueuePtr); |
| wwi->lpQueuePtr = NULL; |
| } |
| wwi->unixdev = audio; |
| wwi->dwTotalRecorded = 0; |
| wwi->wFlags = HIWORD(dwFlags & CALLBACK_TYPEMASK); |
| |
| memcpy(&wwi->waveDesc, lpDesc, sizeof(WAVEOPENDESC)); |
| memcpy(&wwi->format, lpDesc->lpFormat, sizeof(PCMWAVEFORMAT)); |
| |
| if (wwi->format.wBitsPerSample == 0) { |
| WARN("Resetting zeroed wBitsPerSample\n"); |
| wwi->format.wBitsPerSample = 8 * |
| (wwi->format.wf.nAvgBytesPerSec / |
| wwi->format.wf.nSamplesPerSec) / |
| wwi->format.wf.nChannels; |
| } |
| |
| spec[RECORD].rate=sample_rate = wwi->format.wf.nSamplesPerSec; |
| dsp_stereo = ((spec[RECORD].channels=wwi->format.wf.nChannels) > 1) ? TRUE : FALSE; |
| spec[RECORD].precision= wwi->format.wBitsPerSample; |
| spec[RECORD].type=(spec[RECORD].precision==16)?TYPE_SIGNED:TYPE_UNSIGNED; |
| |
| /* This is actually hand tuned to work so that my SB Live: |
| * - does not skip |
| * - does not buffer too much |
| * when sending with the Shoutcast winamp plugin |
| */ |
| /* 7 fragments max, 2^10 = 1024 bytes per fragment */ |
| audio_fragment = 0x0007000A; |
| fragment_size=4096; |
| if (fragment_size == -1) { |
| AudioIOClose(); |
| wwi->unixdev = -1; |
| return MMSYSERR_NOTENABLED; |
| } |
| wwi->dwFragmentSize = fragment_size; |
| |
| TRACE("wBitsPerSample=%u, nAvgBytesPerSec=%lu, nSamplesPerSec=%lu, nChannels=%u nBlockAlign=%u!\n", |
| wwi->format.wBitsPerSample, wwi->format.wf.nAvgBytesPerSec, |
| wwi->format.wf.nSamplesPerSec, wwi->format.wf.nChannels, |
| wwi->format.wf.nBlockAlign); |
| |
| wwi->hEvent = CreateEventA(NULL, FALSE, FALSE, NULL); |
| wwi->hThread = CreateThread(NULL, 0, widRecorder, (LPVOID)(DWORD)wDevID, 0, &(wwi->dwThreadID)); |
| WaitForSingleObject(wwi->hEvent, INFINITE); |
| |
| if (LIBAUDIOIO_NotifyClient(wDevID, WIM_OPEN, 0L, 0L) != MMSYSERR_NOERROR) { |
| WARN("can't notify client !\n"); |
| return MMSYSERR_INVALPARAM; |
| } |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * widClose [internal] |
| */ |
| static DWORD widClose(WORD wDevID) |
| { |
| WINE_WAVEIN* wwi; |
| |
| TRACE("(%u);\n", wDevID); |
| if (wDevID >= MAX_WAVEINDRV || WInDev[wDevID].unixdev == -1) { |
| WARN("can't close !\n"); |
| return MMSYSERR_INVALHANDLE; |
| } |
| |
| wwi = &WInDev[wDevID]; |
| |
| if (wwi->lpQueuePtr != NULL) { |
| WARN("still buffers open !\n"); |
| return WAVERR_STILLPLAYING; |
| } |
| |
| PostThreadMessageA(wwi->dwThreadID, WINE_WM_CLOSING, 0, 0); |
| WaitForSingleObject(wwi->hEvent, INFINITE); |
| CloseHandle(wwi->hEvent); |
| AudioIOClose(); |
| wwi->unixdev = -1; |
| wwi->dwFragmentSize = 0; |
| if (LIBAUDIOIO_NotifyClient(wDevID, WIM_CLOSE, 0L, 0L) != MMSYSERR_NOERROR) { |
| WARN("can't notify client !\n"); |
| return MMSYSERR_INVALPARAM; |
| } |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * widAddBuffer [internal] |
| */ |
| static DWORD widAddBuffer(WORD wDevID, LPWAVEHDR lpWaveHdr, DWORD dwSize) |
| { |
| TRACE("(%u, %p, %08lX);\n", wDevID, lpWaveHdr, dwSize); |
| |
| if (wDevID >= MAX_WAVEINDRV || WInDev[wDevID].unixdev == -1) { |
| WARN("can't do it !\n"); |
| return MMSYSERR_INVALHANDLE; |
| } |
| if (!(lpWaveHdr->dwFlags & WHDR_PREPARED)) { |
| TRACE("never been prepared !\n"); |
| return WAVERR_UNPREPARED; |
| } |
| if (lpWaveHdr->dwFlags & WHDR_INQUEUE) { |
| TRACE("header already in use !\n"); |
| return WAVERR_STILLPLAYING; |
| } |
| |
| lpWaveHdr->dwFlags |= WHDR_INQUEUE; |
| lpWaveHdr->dwFlags &= ~WHDR_DONE; |
| lpWaveHdr->dwBytesRecorded = 0; |
| lpWaveHdr->lpNext = NULL; |
| |
| PostThreadMessageA(WInDev[wDevID].dwThreadID, WINE_WM_HEADER, 0, (DWORD)lpWaveHdr); |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * widPrepare [internal] |
| */ |
| static DWORD widPrepare(WORD wDevID, LPWAVEHDR lpWaveHdr, DWORD dwSize) |
| { |
| TRACE("(%u, %p, %08lX);\n", wDevID, lpWaveHdr, dwSize); |
| |
| if (wDevID >= MAX_WAVEINDRV) return MMSYSERR_INVALHANDLE; |
| |
| if (lpWaveHdr->dwFlags & WHDR_INQUEUE) |
| return WAVERR_STILLPLAYING; |
| |
| lpWaveHdr->dwFlags |= WHDR_PREPARED; |
| lpWaveHdr->dwFlags &= ~(WHDR_INQUEUE|WHDR_DONE); |
| lpWaveHdr->dwBytesRecorded = 0; |
| TRACE("header prepared !\n"); |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * widUnprepare [internal] |
| */ |
| static DWORD widUnprepare(WORD wDevID, LPWAVEHDR lpWaveHdr, DWORD dwSize) |
| { |
| TRACE("(%u, %p, %08lX);\n", wDevID, lpWaveHdr, dwSize); |
| if (wDevID >= MAX_WAVEINDRV) return MMSYSERR_INVALHANDLE; |
| |
| if (lpWaveHdr->dwFlags & WHDR_INQUEUE) |
| return WAVERR_STILLPLAYING; |
| |
| lpWaveHdr->dwFlags &= ~(WHDR_PREPARED|WHDR_INQUEUE); |
| lpWaveHdr->dwFlags |= WHDR_DONE; |
| |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * widStart [internal] |
| */ |
| static DWORD widStart(WORD wDevID) |
| { |
| TRACE("(%u);\n", wDevID); |
| if (wDevID >= MAX_WAVEINDRV || WInDev[wDevID].unixdev == -1) { |
| WARN("can't start recording !\n"); |
| return MMSYSERR_INVALHANDLE; |
| } |
| |
| PostThreadMessageA(WInDev[wDevID].dwThreadID, WINE_WM_RESTARTING, 0, 0); |
| WaitForSingleObject(WInDev[wDevID].hEvent, INFINITE); |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * widStop [internal] |
| */ |
| static DWORD widStop(WORD wDevID) |
| { |
| TRACE("(%u);\n", wDevID); |
| if (wDevID >= MAX_WAVEINDRV || WInDev[wDevID].unixdev == -1) { |
| WARN("can't stop !\n"); |
| return MMSYSERR_INVALHANDLE; |
| } |
| /* FIXME: reset aint stop */ |
| PostThreadMessageA(WInDev[wDevID].dwThreadID, WINE_WM_RESETTING, 0, 0); |
| WaitForSingleObject(WInDev[wDevID].hEvent, INFINITE); |
| |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * widReset [internal] |
| */ |
| static DWORD widReset(WORD wDevID) |
| { |
| TRACE("(%u);\n", wDevID); |
| if (wDevID >= MAX_WAVEINDRV || WInDev[wDevID].unixdev == -1) { |
| WARN("can't reset !\n"); |
| return MMSYSERR_INVALHANDLE; |
| } |
| PostThreadMessageA(WInDev[wDevID].dwThreadID, WINE_WM_RESETTING, 0, 0); |
| WaitForSingleObject(WInDev[wDevID].hEvent, INFINITE); |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * widGetPosition [internal] |
| */ |
| static DWORD widGetPosition(WORD wDevID, LPMMTIME lpTime, DWORD uSize) |
| { |
| int time; |
| WINE_WAVEIN* wwi; |
| |
| TRACE("(%u, %p, %lu);\n", wDevID, lpTime, uSize); |
| |
| if (wDevID >= MAX_WAVEINDRV || WInDev[wDevID].unixdev == -1) { |
| WARN("can't get pos !\n"); |
| return MMSYSERR_INVALHANDLE; |
| } |
| if (lpTime == NULL) return MMSYSERR_INVALPARAM; |
| |
| wwi = &WInDev[wDevID]; |
| |
| TRACE("wType=%04X !\n", lpTime->wType); |
| TRACE("wBitsPerSample=%u\n", wwi->format.wBitsPerSample); |
| TRACE("nSamplesPerSec=%lu\n", wwi->format.wf.nSamplesPerSec); |
| TRACE("nChannels=%u\n", wwi->format.wf.nChannels); |
| TRACE("nAvgBytesPerSec=%lu\n", wwi->format.wf.nAvgBytesPerSec); |
| switch (lpTime->wType) { |
| case TIME_BYTES: |
| lpTime->u.cb = wwi->dwTotalRecorded; |
| TRACE("TIME_BYTES=%lu\n", lpTime->u.cb); |
| break; |
| case TIME_SAMPLES: |
| lpTime->u.sample = wwi->dwTotalRecorded * 8 / |
| wwi->format.wBitsPerSample; |
| TRACE("TIME_SAMPLES=%lu\n", lpTime->u.sample); |
| break; |
| case TIME_SMPTE: |
| time = wwi->dwTotalRecorded / |
| (wwi->format.wf.nAvgBytesPerSec / 1000); |
| lpTime->u.smpte.hour = time / 108000; |
| time -= lpTime->u.smpte.hour * 108000; |
| lpTime->u.smpte.min = time / 1800; |
| time -= lpTime->u.smpte.min * 1800; |
| lpTime->u.smpte.sec = time / 30; |
| time -= lpTime->u.smpte.sec * 30; |
| lpTime->u.smpte.frame = time; |
| lpTime->u.smpte.fps = 30; |
| TRACE("TIME_SMPTE=%02u:%02u:%02u:%02u\n", |
| lpTime->u.smpte.hour, lpTime->u.smpte.min, |
| lpTime->u.smpte.sec, lpTime->u.smpte.frame); |
| break; |
| case TIME_MS: |
| lpTime->u.ms = wwi->dwTotalRecorded / |
| (wwi->format.wf.nAvgBytesPerSec / 1000); |
| TRACE("TIME_MS=%lu\n", lpTime->u.ms); |
| break; |
| default: |
| FIXME("format not supported (%u) ! use TIME_MS !\n", lpTime->wType); |
| lpTime->wType = TIME_MS; |
| } |
| return MMSYSERR_NOERROR; |
| } |
| |
| /************************************************************************** |
| * widMessage (WINEAUDIOIO.@) |
| */ |
| DWORD WINAPI LIBAUDIOIO_widMessage(WORD wDevID, WORD wMsg, DWORD dwUser, |
| DWORD dwParam1, DWORD dwParam2) |
| { |
| TRACE("(%u, %04X, %08lX, %08lX, %08lX);\n", |
| wDevID, wMsg, dwUser, dwParam1, dwParam2); |
| |
| switch (wMsg) { |
| case DRVM_INIT: |
| case DRVM_EXIT: |
| case DRVM_ENABLE: |
| case DRVM_DISABLE: |
| /* FIXME: Pretend this is supported */ |
| return 0; |
| case WIDM_OPEN: return widOpen (wDevID, (LPWAVEOPENDESC)dwParam1, dwParam2); |
| case WIDM_CLOSE: return widClose (wDevID); |
| case WIDM_ADDBUFFER: return widAddBuffer (wDevID, (LPWAVEHDR)dwParam1, dwParam2); |
| case WIDM_PREPARE: return widPrepare (wDevID, (LPWAVEHDR)dwParam1, dwParam2); |
| case WIDM_UNPREPARE: return widUnprepare (wDevID, (LPWAVEHDR)dwParam1, dwParam2); |
| case WIDM_GETDEVCAPS: return widGetDevCaps (wDevID, (LPWAVEINCAPSA)dwParam1, dwParam2); |
| case WIDM_GETNUMDEVS: return wodGetNumDevs (); /* same number of devices in output as in input */ |
| case WIDM_GETPOS: return widGetPosition(wDevID, (LPMMTIME)dwParam1, dwParam2); |
| case WIDM_RESET: return widReset (wDevID); |
| case WIDM_START: return widStart (wDevID); |
| case WIDM_STOP: return widStop (wDevID); |
| default: |
| FIXME("unknown message %u!\n", wMsg); |
| } |
| return MMSYSERR_NOTSUPPORTED; |
| } |
| |
| #else /* HAVE_LIBAUDIOIO */ |
| |
| /************************************************************************** |
| * wodMessage (WINEAUDIOIO.@) |
| */ |
| DWORD WINAPI LIBAUDIOIO_wodMessage(WORD wDevID, WORD wMsg, DWORD dwUser, |
| DWORD dwParam1, DWORD dwParam2) |
| { |
| FIXME("(%u, %04X, %08lX, %08lX, %08lX):stub\n", wDevID, wMsg, dwUser, dwParam1, dwParam2); |
| return MMSYSERR_NOTENABLED; |
| } |
| |
| /************************************************************************** |
| * widMessage (WINEAUDIOIO.@) |
| */ |
| DWORD WINAPI LIBAUDIOIO_widMessage(WORD wDevID, WORD wMsg, DWORD dwUser, |
| DWORD dwParam1, DWORD dwParam2) |
| { |
| FIXME("(%u, %04X, %08lX, %08lX, %08lX):stub\n", wDevID, wMsg, dwUser, dwParam1, dwParam2); |
| return MMSYSERR_NOTENABLED; |
| } |
| |
| #endif /* HAVE_LIBAUDIOIO */ |