| /* |
| * DOS upper memory management. |
| * |
| * Copyright 2002 Jukka Heinonen |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include "dosexe.h" |
| #include "wine/debug.h" |
| |
| WINE_DEFAULT_DEBUG_CHANNEL(dosmem); |
| |
| /* |
| * Wine DOS memory layout above 640k: |
| * |
| * a0000 - affff : VGA graphics (vga.c) |
| * b0000 - bffff : Monochrome text (unused) |
| * b8000 - bffff : VGA text (vga.c) |
| * c0000 - cffff : EMS frame (int67.c) |
| * d0000 - effff : Free memory for UMBs (himem.c) |
| * f0000 - fffff : BIOS stuff (msdos/dosmem.c) |
| * 100000 -10ffff : High memory area (unused) |
| */ |
| |
| /* |
| * Table of real mode segments and protected mode selectors |
| * for code stubs and other miscellaneous storage. |
| */ |
| struct DPMI_segments *DOSVM_dpmi_segments = NULL; |
| |
| /* |
| * First and last address available for upper memory blocks. |
| */ |
| #define DOSVM_UMB_BOTTOM 0xd0000 |
| #define DOSVM_UMB_TOP 0xeffff |
| |
| /* |
| * First free address for upper memory blocks. |
| */ |
| static DWORD DOSVM_umb_free = DOSVM_UMB_BOTTOM; |
| |
| |
| /*********************************************************************** |
| * DOSVM_AllocUMB |
| * |
| * Allocate upper memory block (UMB) from upper memory. |
| * Returned pointer is aligned to 16-byte (paragraph) boundary. |
| * |
| * This routine is only for allocating static storage for |
| * Wine internal uses. Allocated memory can be accessed from |
| * real mode, memory is taken from area already mapped and reserved |
| * by Wine and the allocation has very little memory and speed |
| * overhead. Use of this routine also preserves precious DOS |
| * conventional memory. |
| */ |
| LPVOID DOSVM_AllocUMB( DWORD size ) |
| { |
| LPVOID ptr = (LPVOID)DOSVM_umb_free; |
| |
| size = ((size + 15) >> 4) << 4; |
| |
| if(DOSVM_umb_free + size - 1 > DOSVM_UMB_TOP) { |
| ERR("Out of upper memory area.\n"); |
| return 0; |
| } |
| |
| DOSVM_umb_free += size; |
| return ptr; |
| } |
| |
| |
| /*********************************************************************** |
| * DOSVM_AllocCodeUMB |
| * |
| * Allocate upper memory block for storing code stubs. |
| * Initializes real mode segment and 16-bit protected mode selector |
| * for the allocated code block. |
| */ |
| LPVOID DOSVM_AllocCodeUMB( DWORD size, WORD *segment, WORD *selector ) |
| { |
| LPVOID ptr = DOSVM_AllocUMB( size ); |
| |
| if (segment) |
| *segment = (DWORD)ptr >> 4; |
| |
| if (selector) |
| *selector = SELECTOR_AllocBlock( ptr, size, WINE_LDT_FLAGS_CODE ); |
| |
| return ptr; |
| } |
| |
| |
| /*********************************************************************** |
| * DOSVM_AllocDataUMB |
| * |
| * Allocate upper memory block for storing data. |
| * Initializes real mode segment and 16-bit protected mode selector |
| * for the allocated data block. |
| */ |
| LPVOID DOSVM_AllocDataUMB( DWORD size, WORD *segment, WORD *selector ) |
| { |
| LPVOID ptr = DOSVM_AllocUMB( size ); |
| |
| if (segment) |
| *segment = (DWORD)ptr >> 4; |
| |
| if (selector) |
| *selector = SELECTOR_AllocBlock( ptr, size, WINE_LDT_FLAGS_DATA ); |
| |
| return ptr; |
| } |
| |
| |
| /*********************************************************************** |
| * DOSVM_InitSegments |
| * |
| * Initializes DOSVM_dpmi_segments. Allocates required memory and |
| * sets up segments and selectors for accessing the memory. |
| */ |
| void DOSVM_InitSegments( void ) |
| { |
| LPSTR ptr; |
| int i; |
| |
| static const char wrap_code[]={ |
| 0xCD,0x31, /* int $0x31 */ |
| 0xCB /* lret */ |
| }; |
| |
| static const char enter_xms[]= |
| { |
| /* XMS hookable entry point */ |
| 0xEB,0x03, /* jmp entry */ |
| 0x90,0x90,0x90, /* nop;nop;nop */ |
| /* entry: */ |
| /* real entry point */ |
| /* for simplicity, we'll just use the same hook as DPMI below */ |
| 0xCD,0x31, /* int $0x31 */ |
| 0xCB /* lret */ |
| }; |
| |
| static const char enter_pm[]= |
| { |
| 0x50, /* pushw %ax */ |
| 0x52, /* pushw %dx */ |
| 0x55, /* pushw %bp */ |
| 0x89,0xE5, /* movw %sp,%bp */ |
| /* get return CS */ |
| 0x8B,0x56,0x08, /* movw 8(%bp),%dx */ |
| /* just call int 31 here to get into protected mode... */ |
| /* it'll check whether it was called from dpmi_seg... */ |
| 0xCD,0x31, /* int $0x31 */ |
| /* we are now in the context of a 16-bit relay call */ |
| /* need to fixup our stack; |
| * 16-bit relay return address will be lost, |
| * but we won't worry quite yet |
| */ |
| 0x8E,0xD0, /* movw %ax,%ss */ |
| 0x66,0x0F,0xB7,0xE5, /* movzwl %bp,%esp */ |
| /* set return CS */ |
| 0x89,0x56,0x08, /* movw %dx,8(%bp) */ |
| 0x5D, /* popw %bp */ |
| 0x5A, /* popw %dx */ |
| 0x58, /* popw %ax */ |
| 0xCB /* lret */ |
| }; |
| |
| static const char relay[]= |
| { |
| 0xca, 0x04, 0x00, /* 16-bit far return and pop 4 bytes (relay void* arg) */ |
| 0xcd, 0x31 /* int 31 */ |
| }; |
| |
| /* |
| * Allocate pointer array. |
| */ |
| DOSVM_dpmi_segments = DOSVM_AllocUMB( sizeof(struct DPMI_segments) ); |
| |
| /* |
| * RM / offset 0: Exit from real mode. |
| * RM / offset 2: Points to lret opcode. |
| */ |
| ptr = DOSVM_AllocCodeUMB( sizeof(wrap_code), |
| &DOSVM_dpmi_segments->wrap_seg, 0 ); |
| memcpy( ptr, wrap_code, sizeof(wrap_code) ); |
| |
| /* |
| * RM / offset 0: XMS driver entry. |
| */ |
| ptr = DOSVM_AllocCodeUMB( sizeof(enter_xms), |
| &DOSVM_dpmi_segments->xms_seg, 0 ); |
| memcpy( ptr, enter_xms, sizeof(enter_xms) ); |
| |
| /* |
| * RM / offset 0: Switch to DPMI. |
| * PM / offset 8: DPMI raw mode switch. |
| */ |
| ptr = DOSVM_AllocCodeUMB( sizeof(enter_pm), |
| &DOSVM_dpmi_segments->dpmi_seg, |
| &DOSVM_dpmi_segments->dpmi_sel ); |
| memcpy( ptr, enter_pm, sizeof(enter_pm) ); |
| |
| /* |
| * PM / offset N*6: Interrupt N in DPMI32. |
| */ |
| ptr = DOSVM_AllocCodeUMB( 6 * 256, |
| 0, &DOSVM_dpmi_segments->int48_sel ); |
| for(i=0; i<256; i++) { |
| /* |
| * Each 32-bit interrupt handler is 6 bytes: |
| * 0xCD,<i> = int <i> (nested 16-bit interrupt) |
| * 0x66,0xCA,0x04,0x00 = ret 4 (32-bit far return and pop 4 bytes / eflags) |
| */ |
| ptr[i * 6 + 0] = 0xCD; |
| ptr[i * 6 + 1] = i; |
| ptr[i * 6 + 2] = 0x66; |
| ptr[i * 6 + 3] = 0xCA; |
| ptr[i * 6 + 4] = 0x04; |
| ptr[i * 6 + 5] = 0x00; |
| } |
| |
| /* |
| * PM / offset N*5: Interrupt N in 16-bit protected mode. |
| */ |
| ptr = DOSVM_AllocCodeUMB( 5 * 256, |
| 0, &DOSVM_dpmi_segments->int16_sel ); |
| for(i=0; i<256; i++) { |
| /* |
| * Each 16-bit interrupt handler is 5 bytes: |
| * 0xCD,<i> = int <i> (interrupt) |
| * 0xCA,0x02,0x00 = ret 2 (16-bit far return and pop 2 bytes / eflags) |
| */ |
| ptr[i * 5 + 0] = 0xCD; |
| ptr[i * 5 + 1] = i; |
| ptr[i * 5 + 2] = 0xCA; |
| ptr[i * 5 + 3] = 0x02; |
| ptr[i * 5 + 4] = 0x00; |
| } |
| |
| /* |
| * PM / offset 0: Stub where __wine_call_from_16_regs returns. |
| * PM / offset 3: Stub which swaps back to 32-bit application code/stack. |
| */ |
| ptr = DOSVM_AllocCodeUMB( sizeof(relay), |
| 0, &DOSVM_dpmi_segments->relay_code_sel); |
| memcpy( ptr, relay, sizeof(relay) ); |
| |
| /* |
| * Space for 16-bit stack used by relay code. |
| */ |
| ptr = DOSVM_AllocDataUMB( DOSVM_RELAY_DATA_SIZE, |
| 0, &DOSVM_dpmi_segments->relay_data_sel); |
| memset( ptr, 0, DOSVM_RELAY_DATA_SIZE ); |
| } |
