| /* |
| * i386 register context support |
| * |
| * Copyright (C) 1999 Alexandre Julliard |
| */ |
| |
| #include "config.h" |
| |
| #ifdef __i386__ |
| |
| #include <assert.h> |
| #include <errno.h> |
| #ifdef HAVE_SYS_REG_H |
| #include <sys/reg.h> |
| #endif |
| #include <unistd.h> |
| #include <sys/ptrace.h> |
| #ifdef HAVE_SYS_PARAM_H |
| # include <sys/param.h> |
| #endif |
| #include <sys/user.h> |
| |
| #include "winbase.h" |
| |
| #include "thread.h" |
| #include "request.h" |
| |
| #ifndef PTRACE_PEEKUSER |
| # ifdef PTRACE_PEEKUSR /* libc5 uses USR not USER */ |
| # define PTRACE_PEEKUSER PTRACE_PEEKUSR |
| # else |
| # define PTRACE_PEEKUSER PT_READ_U |
| # endif |
| #endif |
| |
| #ifndef PTRACE_POKEUSER |
| # ifdef PTRACE_POKEUSR /* libc5 uses USR not USER */ |
| # define PTRACE_POKEUSER PTRACE_POKEUSR |
| # else |
| # define PTRACE_POKEUSER PT_WRITE_U |
| # endif |
| #endif |
| |
| #ifndef PTRACE_GETREGS |
| #define PTRACE_GETREGS PT_GETREGS |
| #endif |
| #ifndef PTRACE_GETFPREGS |
| #define PTRACE_GETFPREGS PT_GETFPREGS |
| #endif |
| #ifndef PTRACE_SETREGS |
| #define PTRACE_SETREGS PT_SETREGS |
| #endif |
| #ifndef PTRACE_SETFPREGS |
| #define PTRACE_SETFPREGS PT_SETFPREGS |
| #endif |
| |
| #ifdef linux |
| |
| /* user_regs definitions from asm/user.h */ |
| struct kernel_user_regs_struct |
| { |
| long ebx, ecx, edx, esi, edi, ebp, eax; |
| unsigned short ds, __ds, es, __es; |
| unsigned short fs, __fs, gs, __gs; |
| long orig_eax, eip; |
| unsigned short cs, __cs; |
| long eflags, esp; |
| unsigned short ss, __ss; |
| }; |
| |
| /* debug register offset in struct user */ |
| #define DR_OFFSET(dr) ((int)((((struct user *)0)->u_debugreg) + (dr))) |
| |
| /* retrieve a debug register */ |
| static inline int get_debug_reg( int pid, int num, DWORD *data ) |
| { |
| int res = ptrace( PTRACE_PEEKUSER, pid, DR_OFFSET(num), 0 ); |
| if ((res == -1) && errno) |
| { |
| file_set_error(); |
| return -1; |
| } |
| *data = res; |
| return 0; |
| } |
| |
| /* retrieve a thread context */ |
| static void get_thread_context( struct thread *thread, unsigned int flags, CONTEXT *context ) |
| { |
| int pid = thread->unix_pid; |
| if (flags & CONTEXT_FULL) |
| { |
| struct kernel_user_regs_struct regs; |
| if (ptrace( PTRACE_GETREGS, pid, 0, ®s ) == -1) goto error; |
| if (flags & CONTEXT_INTEGER) |
| { |
| context->Eax = regs.eax; |
| context->Ebx = regs.ebx; |
| context->Ecx = regs.ecx; |
| context->Edx = regs.edx; |
| context->Esi = regs.esi; |
| context->Edi = regs.edi; |
| } |
| if (flags & CONTEXT_CONTROL) |
| { |
| context->Ebp = regs.ebp; |
| context->Esp = regs.esp; |
| context->Eip = regs.eip; |
| context->SegCs = regs.cs; |
| context->SegSs = regs.ss; |
| context->EFlags = regs.eflags; |
| } |
| if (flags & CONTEXT_SEGMENTS) |
| { |
| context->SegDs = regs.ds; |
| context->SegEs = regs.es; |
| context->SegFs = regs.fs; |
| context->SegGs = regs.gs; |
| } |
| } |
| if (flags & CONTEXT_DEBUG_REGISTERS) |
| { |
| if (get_debug_reg( pid, 0, &context->Dr0 ) == -1) goto error; |
| if (get_debug_reg( pid, 1, &context->Dr1 ) == -1) goto error; |
| if (get_debug_reg( pid, 2, &context->Dr2 ) == -1) goto error; |
| if (get_debug_reg( pid, 3, &context->Dr3 ) == -1) goto error; |
| if (get_debug_reg( pid, 6, &context->Dr6 ) == -1) goto error; |
| if (get_debug_reg( pid, 7, &context->Dr7 ) == -1) goto error; |
| } |
| if (flags & CONTEXT_FLOATING_POINT) |
| { |
| /* we can use context->FloatSave directly as it is using the */ |
| /* correct structure (the same as fsave/frstor) */ |
| if (ptrace( PTRACE_GETFPREGS, pid, 0, &context->FloatSave ) == -1) goto error; |
| context->FloatSave.Cr0NpxState = 0; /* FIXME */ |
| } |
| return; |
| error: |
| file_set_error(); |
| } |
| |
| |
| /* set a thread context */ |
| static void set_thread_context( struct thread *thread, unsigned int flags, CONTEXT *context ) |
| { |
| int pid = thread->unix_pid; |
| if (flags & CONTEXT_FULL) |
| { |
| struct kernel_user_regs_struct regs; |
| if (((flags | CONTEXT_i386) & CONTEXT_FULL) != CONTEXT_FULL) |
| { |
| /* need to preserve some registers */ |
| if (ptrace( PTRACE_GETREGS, pid, 0, ®s ) == -1) goto error; |
| } |
| if (flags & CONTEXT_INTEGER) |
| { |
| regs.eax = context->Eax; |
| regs.ebx = context->Ebx; |
| regs.ecx = context->Ecx; |
| regs.edx = context->Edx; |
| regs.esi = context->Esi; |
| regs.edi = context->Edi; |
| } |
| if (flags & CONTEXT_CONTROL) |
| { |
| regs.ebp = context->Ebp; |
| regs.esp = context->Esp; |
| regs.eip = context->Eip; |
| regs.cs = context->SegCs; |
| regs.ss = context->SegSs; |
| regs.eflags = context->EFlags; |
| } |
| if (flags & CONTEXT_SEGMENTS) |
| { |
| regs.ds = context->SegDs; |
| regs.es = context->SegEs; |
| regs.fs = context->SegFs; |
| regs.gs = context->SegGs; |
| } |
| if (ptrace( PTRACE_SETREGS, pid, 0, ®s ) == -1) goto error; |
| } |
| if (flags & CONTEXT_DEBUG_REGISTERS) |
| { |
| if (ptrace( PTRACE_POKEUSER, pid, DR_OFFSET(0), context->Dr0 ) == -1) goto error; |
| if (ptrace( PTRACE_POKEUSER, pid, DR_OFFSET(1), context->Dr1 ) == -1) goto error; |
| if (ptrace( PTRACE_POKEUSER, pid, DR_OFFSET(2), context->Dr2 ) == -1) goto error; |
| if (ptrace( PTRACE_POKEUSER, pid, DR_OFFSET(3), context->Dr3 ) == -1) goto error; |
| if (ptrace( PTRACE_POKEUSER, pid, DR_OFFSET(6), context->Dr6 ) == -1) goto error; |
| if (ptrace( PTRACE_POKEUSER, pid, DR_OFFSET(7), context->Dr7 ) == -1) goto error; |
| } |
| if (flags & CONTEXT_FLOATING_POINT) |
| { |
| /* we can use context->FloatSave directly as it is using the */ |
| /* correct structure (the same as fsave/frstor) */ |
| if (ptrace( PTRACE_SETFPREGS, pid, 0, &context->FloatSave ) == -1) goto error; |
| context->FloatSave.Cr0NpxState = 0; /* FIXME */ |
| } |
| return; |
| error: |
| file_set_error(); |
| } |
| |
| #elif defined(__sun) || defined(__sun__) |
| |
| /* retrieve a thread context */ |
| static void get_thread_context( struct thread *thread, unsigned int flags, CONTEXT *context ) |
| { |
| int pid = thread->unix_pid; |
| if (flags & CONTEXT_FULL) |
| { |
| struct regs regs; |
| if (ptrace( PTRACE_GETREGS, pid, 0, (int) ®s ) == -1) goto error; |
| if (flags & CONTEXT_INTEGER) |
| { |
| context->Eax = regs.r_eax; |
| context->Ebx = regs.r_ebx; |
| context->Ecx = regs.r_ecx; |
| context->Edx = regs.r_edx; |
| context->Esi = regs.r_esi; |
| context->Edi = regs.r_edi; |
| } |
| if (flags & CONTEXT_CONTROL) |
| { |
| context->Ebp = regs.r_ebp; |
| context->Esp = regs.r_esp; |
| context->Eip = regs.r_eip; |
| context->SegCs = regs.r_cs & 0xffff; |
| context->SegSs = regs.r_ss & 0xffff; |
| context->EFlags = regs.r_efl; |
| } |
| if (flags & CONTEXT_SEGMENTS) |
| { |
| context->SegDs = regs.r_ds & 0xffff; |
| context->SegEs = regs.r_es & 0xffff; |
| context->SegFs = regs.r_fs & 0xffff; |
| context->SegGs = regs.r_gs & 0xffff; |
| } |
| } |
| if (flags & CONTEXT_DEBUG_REGISTERS) |
| { |
| /* FIXME: How is this done on Solaris? */ |
| } |
| if (flags & CONTEXT_FLOATING_POINT) |
| { |
| /* we can use context->FloatSave directly as it is using the */ |
| /* correct structure (the same as fsave/frstor) */ |
| if (ptrace( PTRACE_GETFPREGS, pid, 0, (int) &context->FloatSave ) == -1) goto error; |
| context->FloatSave.Cr0NpxState = 0; /* FIXME */ |
| } |
| return; |
| error: |
| file_set_error(); |
| } |
| |
| |
| /* set a thread context */ |
| static void set_thread_context( struct thread *thread, unsigned int flags, CONTEXT *context ) |
| { |
| int pid = thread->unix_pid; |
| if (flags & CONTEXT_FULL) |
| { |
| struct regs regs; |
| if (((flags | CONTEXT_i386) & CONTEXT_FULL) != CONTEXT_FULL) |
| { |
| /* need to preserve some registers */ |
| if (ptrace( PTRACE_GETREGS, pid, 0, (int) ®s ) == -1) goto error; |
| } |
| if (flags & CONTEXT_INTEGER) |
| { |
| regs.r_eax = context->Eax; |
| regs.r_ebx = context->Ebx; |
| regs.r_ecx = context->Ecx; |
| regs.r_edx = context->Edx; |
| regs.r_esi = context->Esi; |
| regs.r_edi = context->Edi; |
| } |
| if (flags & CONTEXT_CONTROL) |
| { |
| regs.r_ebp = context->Ebp; |
| regs.r_esp = context->Esp; |
| regs.r_eip = context->Eip; |
| regs.r_cs = context->SegCs; |
| regs.r_ss = context->SegSs; |
| regs.r_efl = context->EFlags; |
| } |
| if (flags & CONTEXT_SEGMENTS) |
| { |
| regs.r_ds = context->SegDs; |
| regs.r_es = context->SegEs; |
| regs.r_fs = context->SegFs; |
| regs.r_gs = context->SegGs; |
| } |
| if (ptrace( PTRACE_SETREGS, pid, 0, (int) ®s ) == -1) goto error; |
| } |
| if (flags & CONTEXT_DEBUG_REGISTERS) |
| { |
| /* FIXME: How is this done on Solaris? */ |
| } |
| if (flags & CONTEXT_FLOATING_POINT) |
| { |
| /* we can use context->FloatSave directly as it is using the */ |
| /* correct structure (the same as fsave/frstor) */ |
| if (ptrace( PTRACE_SETFPREGS, pid, 0, (int) &context->FloatSave ) == -1) goto error; |
| context->FloatSave.Cr0NpxState = 0; /* FIXME */ |
| } |
| return; |
| error: |
| file_set_error(); |
| } |
| |
| #elif defined(__FreeBSD__) || defined(__OpenBSD__) |
| #include <machine/reg.h> |
| |
| /* retrieve a thread context */ |
| static void get_thread_context( struct thread *thread, unsigned int flags, CONTEXT *context ) |
| { |
| int pid = thread->unix_pid; |
| if (flags & CONTEXT_FULL) |
| { |
| struct reg regs; |
| if (ptrace( PTRACE_GETREGS, pid, 0, (int) ®s ) == -1) goto error; |
| if (flags & CONTEXT_INTEGER) |
| { |
| context->Eax = regs.r_eax; |
| context->Ebx = regs.r_ebx; |
| context->Ecx = regs.r_ecx; |
| context->Edx = regs.r_edx; |
| context->Esi = regs.r_esi; |
| context->Edi = regs.r_edi; |
| } |
| if (flags & CONTEXT_CONTROL) |
| { |
| context->Ebp = regs.r_ebp; |
| context->Esp = regs.r_esp; |
| context->Eip = regs.r_eip; |
| context->SegCs = regs.r_cs & 0xffff; |
| context->SegSs = regs.r_ss & 0xffff; |
| context->EFlags = regs.r_eflags; |
| } |
| if (flags & CONTEXT_SEGMENTS) |
| { |
| context->SegDs = regs.r_ds & 0xffff; |
| context->SegEs = regs.r_es & 0xffff; |
| context->SegFs = regs.r_fs & 0xffff; |
| context->SegGs = regs.r_gs & 0xffff; |
| } |
| } |
| if (flags & CONTEXT_DEBUG_REGISTERS) |
| { |
| /* FIXME: How is this done on FreeBSD? */ |
| } |
| if (flags & CONTEXT_FLOATING_POINT) |
| { |
| /* we can use context->FloatSave directly as it is using the */ |
| /* correct structure (the same as fsave/frstor) */ |
| if (ptrace( PTRACE_GETFPREGS, pid, 0, (int) &context->FloatSave ) == -1) goto error; |
| context->FloatSave.Cr0NpxState = 0; /* FIXME */ |
| } |
| return; |
| error: |
| file_set_error(); |
| } |
| |
| |
| /* set a thread context */ |
| static void set_thread_context( struct thread *thread, unsigned int flags, CONTEXT *context ) |
| { |
| int pid = thread->unix_pid; |
| if (flags & CONTEXT_FULL) |
| { |
| struct reg regs; |
| if (((flags | CONTEXT_i386) & CONTEXT_FULL) != CONTEXT_FULL) |
| { |
| /* need to preserve some registers */ |
| if (ptrace( PTRACE_GETREGS, pid, 0, (int) ®s ) == -1) goto error; |
| } |
| if (flags & CONTEXT_INTEGER) |
| { |
| regs.r_eax = context->Eax; |
| regs.r_ebx = context->Ebx; |
| regs.r_ecx = context->Ecx; |
| regs.r_edx = context->Edx; |
| regs.r_esi = context->Esi; |
| regs.r_edi = context->Edi; |
| } |
| if (flags & CONTEXT_CONTROL) |
| { |
| regs.r_ebp = context->Ebp; |
| regs.r_esp = context->Esp; |
| regs.r_eip = context->Eip; |
| regs.r_cs = context->SegCs; |
| regs.r_ss = context->SegSs; |
| regs.r_eflags = context->EFlags; |
| } |
| if (flags & CONTEXT_SEGMENTS) |
| { |
| regs.r_ds = context->SegDs; |
| regs.r_es = context->SegEs; |
| regs.r_fs = context->SegFs; |
| regs.r_gs = context->SegGs; |
| } |
| if (ptrace( PTRACE_SETREGS, pid, 0, (int) ®s ) == -1) goto error; |
| } |
| if (flags & CONTEXT_DEBUG_REGISTERS) |
| { |
| /* FIXME: How is this done on FreeBSD? */ |
| } |
| if (flags & CONTEXT_FLOATING_POINT) |
| { |
| /* we can use context->FloatSave directly as it is using the */ |
| /* correct structure (the same as fsave/frstor) */ |
| if (ptrace( PTRACE_SETFPREGS, pid, 0, (int) &context->FloatSave ) == -1) goto error; |
| context->FloatSave.Cr0NpxState = 0; /* FIXME */ |
| } |
| return; |
| error: |
| file_set_error(); |
| } |
| |
| #else /* linux || __sun__ || __FreeBSD__ */ |
| #error You must implement get/set_thread_context for your platform |
| #endif /* linux || __sun__ || __FreeBSD__ */ |
| |
| |
| /* copy a context structure according to the flags */ |
| static void copy_context( CONTEXT *to, CONTEXT *from, int flags ) |
| { |
| if (flags & CONTEXT_CONTROL) |
| { |
| to->Ebp = from->Ebp; |
| to->Eip = from->Eip; |
| to->Esp = from->Esp; |
| to->SegCs = from->SegCs; |
| to->SegSs = from->SegSs; |
| to->EFlags = from->EFlags; |
| } |
| if (flags & CONTEXT_INTEGER) |
| { |
| to->Eax = from->Eax; |
| to->Ebx = from->Ebx; |
| to->Ecx = from->Ecx; |
| to->Edx = from->Edx; |
| to->Esi = from->Esi; |
| to->Edi = from->Edi; |
| } |
| if (flags & CONTEXT_SEGMENTS) |
| { |
| to->SegDs = from->SegDs; |
| to->SegEs = from->SegEs; |
| to->SegFs = from->SegFs; |
| to->SegGs = from->SegGs; |
| } |
| if (flags & CONTEXT_FLOATING_POINT) |
| { |
| to->FloatSave = from->FloatSave; |
| } |
| /* we don't bother copying the debug registers, since they */ |
| /* always need to be accessed by ptrace anyway */ |
| } |
| |
| /* retrieve the current instruction pointer of a thread */ |
| void *get_thread_ip( struct thread *thread ) |
| { |
| CONTEXT context; |
| context.Eip = 0; |
| if (suspend_for_ptrace( thread )) |
| { |
| get_thread_context( thread, CONTEXT_CONTROL, &context ); |
| resume_thread( thread ); |
| } |
| return (void *)context.Eip; |
| } |
| |
| /* retrieve the current context of a thread */ |
| DECL_HANDLER(get_thread_context) |
| { |
| struct thread *thread; |
| int flags = req->flags & ~CONTEXT_i386; /* get rid of CPU id */ |
| |
| if (get_req_data_size(req) < sizeof(CONTEXT)) |
| { |
| set_error( STATUS_INVALID_PARAMETER ); |
| return; |
| } |
| if ((thread = get_thread_from_handle( req->handle, THREAD_GET_CONTEXT ))) |
| { |
| if (thread->context) /* thread is inside an exception event */ |
| { |
| copy_context( get_req_data(req), thread->context, flags ); |
| flags &= CONTEXT_DEBUG_REGISTERS; |
| } |
| if (flags && suspend_for_ptrace( thread )) |
| { |
| get_thread_context( thread, flags, get_req_data(req) ); |
| resume_thread( thread ); |
| } |
| release_object( thread ); |
| } |
| } |
| |
| |
| /* set the current context of a thread */ |
| DECL_HANDLER(set_thread_context) |
| { |
| struct thread *thread; |
| int flags = req->flags & ~CONTEXT_i386; /* get rid of CPU id */ |
| |
| if (get_req_data_size(req) < sizeof(CONTEXT)) |
| { |
| set_error( STATUS_INVALID_PARAMETER ); |
| return; |
| } |
| if ((thread = get_thread_from_handle( req->handle, THREAD_SET_CONTEXT ))) |
| { |
| if (thread->context) /* thread is inside an exception event */ |
| { |
| copy_context( thread->context, get_req_data(req), flags ); |
| flags &= CONTEXT_DEBUG_REGISTERS; |
| } |
| if (flags && suspend_for_ptrace( thread )) |
| { |
| set_thread_context( thread, flags, get_req_data(req) ); |
| resume_thread( thread ); |
| } |
| release_object( thread ); |
| } |
| } |
| |
| #endif /* __i386__ */ |