| /* ASPI definitions used for both WINASPI and WNASPI32 */ |
| |
| #ifndef __WINE_ASPI_H |
| #define __WINE_ASPI_H |
| |
| #include "windef.h" |
| |
| #include "pshpack1.h" |
| #ifdef __cplusplus |
| extern "C" { |
| #endif /* #ifdef __cplusplus */ |
| |
| |
| /* Stuff in BOTH spec */ |
| |
| /* SCSI Miscellaneous Stuff */ |
| #define SENSE_LEN 14 |
| #define SRB_DIR_SCSI 0x00 |
| #define SRB_POSTING 0x01 |
| #define SRB_ENABLE_RESIDUAL_COUNT 0x04 |
| #define SRB_DIR_IN 0x08 |
| #define SRB_DIR_OUT 0x10 |
| |
| /* ASPI Command Definitions */ |
| #define SC_HA_INQUIRY 0x00 |
| #define SC_GET_DEV_TYPE 0x01 |
| #define SC_EXEC_SCSI_CMD 0x02 |
| #define SC_ABORT_SRB 0x03 |
| #define SC_RESET_DEV 0x04 |
| #define SC_SET_HA_PARMS 0x05 |
| #define SC_GET_DISK_INFO 0x06 |
| |
| /* SRB status codes */ |
| #define SS_PENDING 0x00 |
| #define SS_COMP 0x01 |
| #define SS_ABORTED 0x02 |
| #define SS_ABORT_FAIL 0x03 |
| #define SS_ERR 0x04 |
| |
| #define SS_INVALID_CMD 0x80 |
| #define SS_INVALID_HA 0x81 |
| #define SS_NO_DEVICE 0x82 |
| |
| #define SS_INVALID_SRB 0xE0 |
| #define SS_OLD_MANAGER 0xE1 |
| #define SS_BUFFER_ALIGN 0xE1 // Win32 |
| #define SS_ILLEGAL_MODE 0xE2 |
| #define SS_NO_ASPI 0xE3 |
| #define SS_FAILED_INIT 0xE4 |
| #define SS_ASPI_IS_BUSY 0xE5 |
| #define SS_BUFFER_TO_BIG 0xE6 |
| #define SS_MISMATCHED_COMPONENTS 0xE7 // DLLs/EXE version mismatch |
| #define SS_NO_ADAPTERS 0xE8 |
| #define SS_INSUFFICIENT_RESOURCES 0xE9 |
| #define SS_ASPI_IS_SHUTDOWN 0xEA |
| #define SS_BAD_INSTALL 0xEB |
| |
| |
| /* Host status codes */ |
| #define HASTAT_OK 0x00 |
| #define HASTAT_SEL_TO 0x11 |
| #define HASTAT_DO_DU 0x12 |
| #define HASTAT_BUS_FREE 0x13 |
| #define HASTAT_PHASE_ERR 0x14 |
| |
| #define HASTAT_TIMEOUT 0x09 |
| #define HASTAT_COMMAND_TIMEOUT 0x0B |
| #define HASTAT_MESSAGE_REJECT 0x0D |
| #define HASTAT_BUS_RESET 0x0E |
| #define HASTAT_PARITY_ERROR 0x0F |
| #define HASTAT_REQUEST_SENSE_FAILED 0x10 |
| |
| |
| |
| |
| |
| /*********** OLD ****************/ |
| |
| /* Target status codes */ |
| #define STATUS_GOOD 0x00 |
| #define STATUS_CHKCOND 0x02 |
| #define STATUS_BUSY 0x08 |
| #define STATUS_RESCONF 0x18 |
| |
| #define ASPI_POSTING(prb) (prb->SRB_Flags & 0x1) |
| |
| /* WNASPI32/WINASPI defs */ |
| #define HOST_TO_TARGET(prb) (((prb->SRB_Flags>>3) & 0x3) == 0x2) |
| #define TARGET_TO_HOST(prb) (((prb->SRB_Flags>>3) & 0x3) == 0x1) |
| #define NO_DATA_TRANSFERED(prb) (((prb->SRB_Flags>>3) & 0x3) == 0x3) |
| |
| |
| #define INQUIRY_VENDOR 8 |
| |
| #define MUSTEK_SCSI_AREA_AND_WINDOWS 0x04 |
| #define MUSTEK_SCSI_READ_SCANNED_DATA 0x08 |
| #define MUSTEK_SCSI_GET_IMAGE_STATUS 0x0f |
| #define MUSTEK_SCSI_ADF_AND_BACKTRACE 0x10 |
| #define MUSTEK_SCSI_CCD_DISTANCE 0x11 |
| #define MUSTEK_SCSI_START_STOP 0x1b |
| |
| #define CMD_TEST_UNIT_READY 0x00 |
| #define CMD_REQUEST_SENSE 0x03 |
| #define CMD_INQUIRY 0x12 |
| |
| /* scanner commands - just for debug */ |
| #define CMD_SCAN_GET_DATA_BUFFER_STATUS 0x34 |
| #define CMD_SCAN_GET_WINDOW 0x25 |
| #define CMD_SCAN_OBJECT_POSITION 0x31 |
| #define CMD_SCAN_READ 0x28 |
| #define CMD_SCAN_RELEASE_UNIT 0x17 |
| #define CMD_SCAN_RESERVE_UNIT 0x16 |
| #define CMD_SCAN_SCAN 0x1b |
| #define CMD_SCAN_SEND 0x2a |
| #define CMD_SCAN_CHANGE_DEFINITION 0x40 |
| |
| #define INQURIY_CMDLEN 6 |
| #define INQURIY_REPLY_LEN 96 |
| #define INQUIRY_VENDOR 8 |
| |
| #define SENSE_BUFFER(prb) (&prb->CDBByte[prb->SRB_CDBLen]) |
| |
| #ifdef __cplusplus |
| } |
| #endif /* #ifdef __cplusplus */ |
| #include "poppack.h" |
| |
| #endif |
