  <chapter id="installing">
    <title>Installing/compiling Wine</title>
    <para>How to install Wine...</para>

    <sect1 id="replace-windows" xreflabel="--Installing Section--">
      <title>WWN #52 Feature: Replacing Windows</title>

      <para>
        Written by &name-ove-kaaven; <email>&email-ove-kaaven;</email>

      </para>

      <sect2>
        <title>Installation Overview</title>

        <para>
          A Windows installation consists of many different parts.
        </para>

        <itemizedlist>
          <listitem>
            <para>
              Registry. Many keys are supposed to exist and contain
              meaningful data, even in a newly-installed Windows.
            </para>
          </listitem>
          <listitem>
            <para>
              Directory structure. Applications expect to find and/or
              install things in specific predetermined locations. Most
              of these directories are expected to exist. But unlike
              Unix directory structures, most of these locations are
              not hardcoded, and can be queried via the Windows API
              and the registry. This places additional requirements on
              a Wine installation.
            </para>
          </listitem>
          <listitem>
            <para>
              System DLLs. In Windows, these usually reside in the
              <filename>system</filename> (or
              <filename>system32</filename>) directories. Some Windows
              applications check for their existence in these
              directories before attempting to load them. While Wine
              is able to load its own internal DLLs
              (<filename>.so</filename> files) when the application
              asks for a DLL, Wine does not simulate the existence of
              nonexisting files.
            </para>
          </listitem>
        </itemizedlist>

        <para>
          While the users are of course free to set up everything
          themselves, the Wine team will make the automated Wine source
          installation script, <filename>tools/wineinstall</filename>,
          do everything we find necessary to do; running the
          conventional <userinput>configure && make depend && make && make
            install</userinput> cycle is thus not recommended, unless
          you know what you're doing. At the moment,
          <filename>tools/wineinstall</filename> is able to create a
          configuration file, install the registry, and create the
          directory structure itself.
        </para>
      </sect2>

      <sect2>
        <title>The Registry</title>
        <para>
          The default registry is in the file
          <filename>winedefault.reg</filename>. It contains directory
          paths, class IDs, and more; it must be installed before most
          <filename>INSTALL.EXE</filename> or
          <filename>SETUP.EXE</filename> applications will work. The
          registry is covered in more detail <link
	  linkend="registry">here</link>.
        </para>
      </sect2>

      <sect2>
        <title>Directory Structure</title>
        <para>
          Here's the fundamental layout that Windows applications and
          installers expect. Without it, they seldom operate
          correctly.
        </para>

<programlisting>
C:\                Root directory of primary disk drive
  Windows\         Windows directory, containing .INI files,
                     accessories, etc.
  System\          Win3.x/95/98/ME directory for common DLLs
                     WinNT/2000 directory for common 16-bit DLLs
  System32\        WinNT/2000 directory for common 32-bit DLLs
  Start Menu\      Program launcher directory structure
    Programs\      Program launcher links (.LNK files) to applications
  Program Files\   Application binaries (.EXE and .DLL files)
</programlisting>

        <para>
          Wine emulates drives by placing their virtual drive roots to
          user-configurable points in the Unix filesystem, so it's
          your choice where <medialabel>C:</medialabel>'s root should
          be (<filename>tools/wineinstall</filename> will even ask
          you). If you choose, say, <filename>/var/wine</filename>, as
          the root of your virtual drive <medialabel>C</medialabel>,
          then you'd put this in your <filename>~/.wine/config</filename>:
        </para>

        <programlisting>
[Drive C]
"Path" = "/var/wine"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
        </programlisting>

        <para>
          With this configuration, what windows apps think of as
          "c:\windows\system" would map to
          <filename>/var/wine/windows/system</filename> in the UNIX
          filesystem. Note that you need to specify
          <literal>"Filesystem" = "win95"</literal>, NOT
          <literal>"Filesystem" = "unix"</literal>, to make Wine simulate a
          Windows-compatible (case-insensitive) filesystem, otherwise
          most apps won't work.
        </para>
      </sect2>

      <sect2>
        <title>System DLLs</title>
        <para>
          The Wine team has determined that it is necessary to create
          fake DLL files to trick many applications that check for
          file existence to determine whether a particular feature
          (such as Winsock and its TCP/IP networking) is available. If
          this is a problem for you, you can create empty files in the
          configured <filename>c:\windows\system</filename> directory
	  to make the application think it's there, and Wine's built-in DLL
	  will be loaded when the application actually asks for it.
          (Unfortunately, <filename>tools/wineinstall</filename> does
          not create such empty files itself.)
        </para>
        <para>
          Applications sometimes also try to inspect the version
          resources from the physical files (for example, to determine
          the DirectX version). Empty files will not do in this case,
          it is rather necessary to install files with complete
          version resources. This problem is currently being worked
          on. In the meantime, you may still need to grab some real
          DLL files to fool these apps with.
        </para>
        <para>
          And there are of course DLLs that wine does not currently
          implement very well (or at all). If you do not have a real
          Windows you can steal necessary DLLs from, you can always
          get some from one of the Windows DLL archive sites
	  that can be found via internet search engine.
	  Please make sure to obey any licenses on the DLLs you fetch...
	  (some are redistributable, some aren't).
        </para>
      </sect2>
    </sect1>

    <sect1 id="no-windows">
      <title>Installing Wine Without Windows</title>
      <para>
        Written by &name-james-juran; <email>&email-james-juran;</email>
      </para>
      <para>
        (Extracted from <filename>wine/documentation/no-windows</filename>)
      </para>

      <para>
        A major goal of Wine is to allow users to run Windows programs
        without having to install Windows on their machine. Wine
        implements the functionality of the main DLLs usually
        provided with Windows. Therefore, once Wine is finished, you
        will not need to have Windows installed to use Wine.
      </para>
      <para>
        Wine has already made enough progress that it may be possible
        to run your target applications without Windows installed. If
        you want to try it, follow these steps:
      </para>

      <orderedlist>
        <listitem>
          <para>
            Point <medialabel>[Drive C]</medialabel> in
            <filename>~/.wine/config</filename> to the directory where you want
            <filename>C:</filename> to be. Refer to the wine.conf man page
            for more information.
	    The directory to be used for emulating a C: drive will be
	    the base directory for some Windows specific directories
	    created below.
	    Remember to use
            <userinput>"Filesystem" = "win95"</userinput>!
          </para>
        </listitem>
        <listitem>
          <para>
	    Within the directory to be used for C:, create empty
	    <filename>windows</filename>,
            <filename>windows/system</filename>,
            <filename>windows/Start Menu</filename>, and
            <filename>windows/Start Menu/Programs</filename>
            directories. Do not point Wine to a
            <filename>Windows</filename> directory full of old
            installations and a messy registry. (Wine creates a
            special registry in your <filename >home</filename>
            directory, in <filename>$HOME/.wine/*.reg</filename>.
            Perhaps you have to remove these files).
	    In one line:
	    mkdir -p windows windows/system windows/Start\ Menu windows/Start\ Menu/Programs
          </para>
        </listitem>
        <listitem>
          <para>
            Use <filename>tools/wineinstall</filename> to compile Wine
            and install the default registry. Or if you prefer to do
            it yourself, compile <filename>programs/regapi</filename>,
            and run:
          </para>
	  <screen>
		<userinput>programs/regapi/regapi setValue &lt; winedefault.reg</userinput>
	  </screen>
        </listitem>
        <listitem>
          <para>
            Run and/or install your applications.
          </para>
        </listitem>
      </orderedlist>

      <para>
        Because Wine is not yet complete, some programs will work
        better with native Windows DLLs than with Wine's
        replacements. Wine has been designed to make this possible.
        Here are some tips by Juergen Schmied (and others) on how to
        proceed. This assumes that your
        <filename>C:\windows</filename> directory in the configuration
        file does not point to a native Windows installation but is in
        a separate Unix file system. (For instance, <quote>C:\windows</quote> is
        really subdirectory <quote>windows</quote> located in
        <quote>/home/ego/wine/drives/c</quote>).
      </para>

      <itemizedlist>
        <listitem>
          <para>
            Run the application with <parameter>--debugmsg
              +loaddll</parameter> to find out which files are
            needed. Copy the required DLLs one by one to the
            <filename>C:\windows\system</filename> directory. Do not
            copy KERNEL/KERNEL32, GDI/GDI32, USER/USER32 or NTDLL. These
            implement the core functionality of the Windows API, and
            the Wine internal versions must be used.
          </para>
        </listitem>
        <listitem>
          <para>
            Edit the <quote>[DllOverrides]</quote> section of
            <filename>~/.wine/config</filename> to specify
            <quote>native</quote> before <quote>builtin</quote> for
            the Windows DLLs you want to use. For more information
            about this, see the Wine manpage.
          </para>
        </listitem>
        <listitem>
          <para>
            Note that some network DLLs are not needed even though
            Wine is looking for them. The Windows
            <filename>MPR.DLL</filename> currently does not work; you
            must use the internal implementation.
          </para>
        </listitem>
        <listitem>
          <para>
            Copy SHELL/SHELL32 and COMDLG/COMDLG32 COMMCTRL/COMCTL32
            only as pairs to your Wine directory (these DLLs are
            <quote>clean</quote> to use).  Make sure you have these
            specified in the <quote>[DllPairs]</quote> section of
            <filename>~/.wine/config</filename>.
          </para>
        </listitem>
        <listitem>
          <para>
            Be consistent: Use only DLLs from the same Windows version
            together.
          </para>
        </listitem>
        <listitem>
          <para>
            Put <filename>regedit.exe</filename> in the
            <filename>C:\windows</filename> directory.
            (<application>Office 95</application> imports a
            <filename>*.reg</filename> file when it runs with an empty
            registry, don't know about
            <application>Office 97</application>).
          </para>
        </listitem>
        <listitem>
          <para>
            Also add <filename>winhelp.exe</filename> and
            <filename>winhlp32.exe</filename> if you want to be able
            to browse through your programs' help function.
          </para>
        </listitem>
      </itemizedlist>
    </sect1>

    <sect1 id="with-windows">
      <title>Installing Wine Using An Existing Windows Partition As Base</title>
      <para>
        Some people intend to use the data of an existing Windows partition
	with Wine in order to gain some better compatibility or to run already
	installed programs in a setup as original as possible.
	Note that many Windows programs assume that they have full write
	access to all windows directories.

	This means that you either have to configure the Windows
	partition mount point for write permission by your Wine user
	(see <link linkend="vfat">Dealing with FAT/VFAT partitions</link>
	on how to do that), or you'll have to copy over (some parts of) the Windows
	partition content to a directory of a Unix partition and make
	sure this directory structure is writable by your user.
	We HIGHLY DISCOURAGE people from directly using a Windows partition with
	write access as a base for Wine !! (some programs, notably
	Explorer, corrupt large parts of the Windows partition in case
	of an incorrect setup; you've been warned).
	Not to mention that NTFS write support in Linux is still very
	experimental and DANGEROUS (in case you're using an NT-based
	Windows version using the NTFS file system).
	Thus we advise you to go the Unix directory way.
      </para>
    </sect1>

    <sect1 id="vfat">
      <title>Dealing With FAT/VFAT Partitions</title>
      <para>
        Written by &name-steven-elliott; <email>&email-steven-elliott;</email>
      </para>
      <para>
        (Extracted from <filename>wine/documentation/linux-fat-permissions</filename>)
      </para>
      <para>
        This document describes how FAT and
        VFAT file system permissions work in Linux
        with a focus on configuring them for Wine.
      </para>

      <sect2>
        <title>Introduction</title>
        <para>
          Linux is able to access DOS and Windows file systems using
          either the FAT (older 8.3 DOS filesystems) or VFAT (newer
          Windows 95 or later long filename filesystems) modules.
          Mounted FAT or VFAT filesystems provide the primary means
          for which existing applications and their data are accessed
          through Wine for dual boot (Linux + Windows) systems.
        </para>
        <para>
          Wine maps mounted FAT filesystems, such as
          <filename>/c</filename>, to driver letters, such as
          <quote>c:</quote>, as indicated by the
          <filename>~/.wine/config</filename> file.  The following excerpt
          from a <filename>~/.wine/config</filename> file does this:
        </para>
        <programlisting>
[Drive C]
"Path" = "/c"
"Type" = "hd"
        </programlisting>
        <para>
          Although VFAT filesystems are preferable to FAT filesystems
          for their long filename support the term <quote>FAT</quote>
          will be used throughout the remainder of this document to
          refer to FAT filesystems and their derivatives. Also,
          <quote>/c</quote> will be used as the FAT mount point in
          examples throughout this document.
        </para>
        <para>
          Most modern Linux distributions either detect or allow
          existing FAT file systems to be configured so that they can be
          mounted, in a location such as <filename>/c</filename>,
          either persistently (on bootup) or on an as needed basis. In
          either case, by default, the permissions will probably be
          configured so that they look like:
        </para>
        <screen>
<prompt>~></prompt><userinput>cd /c</userinput>
<prompt>/c></prompt><userinput>ls -l</userinput>
<computeroutput>-rwxr-xr-x   1 root     root           91 Oct 10 17:58 autoexec.bat
-rwxr-xr-x   1 root     root          245 Oct 10 17:58 config.sys
drwxr-xr-x  41 root     root        16384 Dec 30  1998 windows</computeroutput>
        </screen>
        <para>
          where all the files are owned by "root", are in the "root"
          group and are only writable by "root"
          (<literal>755</literal> permissions). This is restrictive in
          that it requires that Wine be run as root in order for
          applications to be able to write to any part of the
          filesystem.
        </para>
        <para>
          There are three major approaches to overcoming the restrictive
          permissions mentioned in the previous paragraph:
        </para>
        <orderedlist>
          <listitem>
            <para>
              Run <application>Wine</application> as root
            </para>
          </listitem>
          <listitem>
            <para>
              Mount the FAT filesystem with less restrictive
              permissions
            </para>
          </listitem>
          <listitem>
            <para>
              Shadow the FAT filesystem by completely or partially
              copying it
            </para>
          </listitem>
        </orderedlist>
        <para>
          Each approach will be discussed in the following sections.
        </para>
      </sect2>

      <sect2>
        <title>Running Wine as root</title>
        <para>
          Running Wine as root is the easiest and most thorough way of giving
          applications that Wine runs unrestricted access to FAT files systems.
          Running wine as root also allows applications to do things unrelated
          to FAT filesystems, such as listening to ports that are less than
          1024.  Running Wine as root is dangerous since there is no limit to
          what the application can do to the system.
        </para>
      </sect2>

      <sect2>
        <title>Mounting FAT filesystems</title>
        <para>
          The FAT filesystem can be mounted with permissions less restrictive
          than the default.  This can be done by either changing the user that
          mounts the FAT filesystem or by explicitly changing the permissions
          that the FAT filesystem is mounted with.  The permissions are
          inherited from the process that mounts the FAT filesystem.  Since the
          process that mounts the FAT filesystem is usually a startup script
          running as root the FAT filesystem inherits root's permissions.  This
          results in the files on the FAT filesystem having permissions similar
          to files created by root.  For example:
        </para>
        <screen>
<prompt>~></prompt><userinput>whoami</userinput>
<computeroutput>root</computeroutput>
<prompt>~></prompt><userinput>touch root_file</userinput>
<prompt>~></prompt><userinput>ls -l root_file</userinput>
<computeroutput></computeroutput>-rw-r--r--   1 root     root            0 Dec 10 00:20 root_file
        </screen>
        <para>
          which matches the owner, group and permissions of files seen
          on the FAT filesystem except for the missing 'x's.  The
          permissions on the FAT filesystem can be changed by changing
          root's umask (unset permissions bits).  For example:
        </para>
        <screen>
<prompt>~></prompt><userinput>umount /c</userinput>
<prompt>~></prompt><userinput>umask</userinput>
<computeroutput>022</computeroutput>
<prompt>~></prompt><userinput>umask 073</userinput>
<prompt>~></prompt><userinput>mount /c</userinput>
<prompt>~></prompt><userinput>cd /c</userinput>
<prompt>/c></prompt><userinput>ls -l</userinput>
<computeroutput>-rwx---r--   1 root     root           91 Oct 10 17:58 autoexec.bat
-rwx---r--   1 root     root          245 Oct 10 17:58 config.sys
drwx---r--  41 root     root        16384 Dec 30  1998 windows</computeroutput>
        </screen>
        <para>
          Mounting the FAT filesystem with a umask of
          <literal>000</literal> gives all users complete control over
          it. Explicitly specifying the permissions of the FAT
          filesystem when it is mounted provides additional control.
          There are three mount options that are relevant to FAT
          permissions: <literal>uid</literal>, <literal>gid</literal>
          and <literal>umask</literal>.  They can each be specified
          when the filesystem is manually mounted.  For example:
        </para>
        <screen>
<prompt>~></prompt><userinput>umount /c</userinput>
<prompt>~></prompt><userinput>mount -o uid=500 -o gid=500 -o umask=002 /c</userinput>
<prompt>~></prompt><userinput>cd /c</userinput>
<prompt>/c></prompt><userinput>ls -l</userinput>
<computeroutput>-rwxrwxr-x   1 sle      sle            91 Oct 10 17:58 autoexec.bat
-rwxrwxr-x   1 sle      sle           245 Oct 10 17:58 config.sys
drwxrwxr-x  41 sle      sle         16384 Dec 30  1998 windows</computeroutput>
        </screen>
        <para>
          which gives "sle" complete control over
          <filename>/c</filename>.  The options listed above can be
          made permanent by adding them to the
          <filename>/etc/fstab</filename> file:
        </para>
        <screen>
<prompt>~></prompt><userinput>grep /c /etc/fstab</userinput>
<computeroutput>/dev/hda1  /c  vfat  uid=500,gid=500,umask=002,exec,dev,suid,rw 1 1</computeroutput>
        </screen>
        <para>
          Note that the umask of <literal>002</literal> is common in
          the user private group file permission scheme.  On FAT file
          systems this umask assures that all files are fully
          accessible by all users in the specified group
          (<literal>gid</literal>).
        </para>
      </sect2>

      <sect2>
        <title>Shadowing FAT filesystems</title>
        <para>
          Shadowing provides a finer granularity of control.  Parts of
          the original FAT filesystem can be copied so that the
          application can safely work with those copied parts while
          the application continues to directly read the remaining
          parts.  This is done with symbolic links. For example,
          consider a system where an application named
          <application>AnApp</application> must be able to read and
          write to the <filename>c:\windows</filename> and
          <filename>c:\AnApp</filename> directories as well as have
          read access to the entire FAT filesystem.  On this system
          the FAT filesystem has default permissions which should not
          be changed for security reasons or can not be changed due to
          lack of root access.  On this system a shadow directory
          might be set up in the following manner:
        </para>
        <screen>
<prompt>~></prompt><userinput>cd /</userinput>
<prompt>/></prompt><userinput>mkdir c_shadow</userinput>
<prompt>/></prompt><userinput>cd c_shadow</userinput>
<prompt>/c_shadow></prompt><userinput>ln -s /c_/* .</userinput>
<prompt>/c_shadow></prompt><userinput>rm windows AnApp</userinput>
<prompt>/c_shadow></prompt><userinput>cp -R /c_/{windows,AnApp} .</userinput>
<prompt>/c_shadow></prompt><userinput>chmod -R 777 windows AnApp</userinput>
<prompt>/c_shadow></prompt><userinput>perl -p -i -e 's|/c$|/c_shadow|g' /usr/local/etc/wine.conf</userinput>
        </screen>
        <para>
          The above gives everyone complete read and write access to
          the <filename>windows</filename> and
          <filename>AnApp</filename> directories while only root has
          write access to all other directories.
        </para>
      </sect2>
    </sect1>

    <sect1 id="scsi-support">
      <title>SCSI Support</title>
      <para>
        Written by &name-bruce-milner; <email>&email-bruce-milner;</email>;
        Additions by &name-andreas-mohr; <email>&email-andreas-mohr;</email>
      </para>
      <para>
        (Extracted from <filename>wine/documentation/aspi</filename>)
      </para>

      <para>
        This file describes setting up the Windows ASPI interface.
      </para>

      <para>
        <warning><title>Warning/Warning/Warning!!!!!!</title>
          <para>This may trash your system if used incorrectly.  It may
		  even trash your system when used <emphasis>correctly</>!
          </para>
        </warning>
      </para>

      <para>
        Now that I have said that. ASPI is a direct link to SCSI devices from
        windows programs. ASPI just forwards the SCSI commands that programs send
        to it to the SCSI bus.
      </para>
      <para>
        If you use the wrong SCSI device in your setup file, you can send
        completely bogus commands to the wrong device - An example would be
        formatting your hard drives (assuming the device gave you permission -
        if you're running as root, all bets are off).
      </para>
      <para>
        So please make sure that <emphasis>all</emphasis> SCSI devices not needed by the program
        have their permissions set as restricted as possible !
      </para>

      <para>
        Cookbook for setting up scanner: (At least how mine is to work)
	(well, for other devices such as CD burners, MO drives, ..., too)
      </para>

      <sect2>
        <title>Windows requirements</title>
        <orderedlist>
          <listitem>
            <para>
              The scanner software needs to use the "Adaptec"
              compatible drivers (ASPI). At least with Mustek, they
              allow you the choice of using the builtin card or the
              "Adaptec (AHA)" compatible drivers. This will not work
              any other way. Software that accesses the scanner via a
              DOS ASPI driver (e.g. ASPI2DOS) is supported, too. [AM]
            </para>
          </listitem>
          <listitem>
            <para>
              You probably need a real windows install of the software
              to set the LUN's/SCSI id's up correctly. I'm not exactly
              sure.
            </para>
          </listitem>
        </orderedlist>
      </sect2>

      <sect2>
        <title>Linux requirements</title>
        <orderedlist>
          <listitem>
            <para>
              Your SCSI card must be supported under Linux. This will
              not work with an unknown SCSI card. Even for cheap'n
              crappy "scanner only" controllers some special Linux
              drivers exist on the net.
	      If you intend to use your IDE device, you need to use the
	      ide-scsi emulation.
	      Read
	      <ulink url="http://www.linuxdoc.org/HOWTO/CD-Writing-HOWTO.html">
	                  http://www.linuxdoc.org/HOWTO/CD-Writing-HOWTO.html</ulink>
	      for ide-scsi setup instructions.
            </para>
          </listitem>
          <listitem>
            <para>
              Compile generic SCSI drivers into your kernel.
            </para>
          </listitem>
          <listitem>
            <para>
	      This seems to be not required any more for newer (2.2.x) kernels:
              Linux by default uses smaller SCSI buffers than Windows.
              There is a kernel build define <literal>SG_BIG_BUFF</literal> (in
              <filename>sg.h</filename>) that is by default set too
              low. The SANE project recommends
              <literal>130560</literal> and this seems to work just
              fine. This does require a kernel rebuild.
            </para>
          </listitem>
          <listitem>
            <para>
              Make the devices for the scanner (generic SCSI devices)
              - look at the SCSI programming HOWTO at
              <ulink url="http://www.linuxdoc.org/HOWTO/SCSI-Programming-HOWTO.html">
			  http://www.linuxdoc.org/HOWTO/SCSI-Programming-HOWTO.html</ulink>
	      for device numbering.
            </para>
          </listitem>
          <listitem>
            <para>
              I would recommend making the scanner device writable by
              a group. I made a group called
              <literal>scanner</literal> and added myself to it.
              Running as root increases your risk of sending bad SCSI
              commands to the wrong device. With a regular user, you
              are better protected.
            </para>
          </listitem>
          <listitem>
            <para>
	      For Win32 software (WNASPI32), Wine has auto-detection in place.
	      For Win16 software (WINASPI), you need to add a SCSI device entry
	      for your particular scanner to ~/.wine/config. The format is
	      <literal>[scsi cCtTdD]</literal> where
              <literal>"C" = "controller"</literal>,
              <literal>"T" = "target"</literal>, <literal>D=LUN</literal>
            </para>
            <para>
              For example, I set mine up as  controller <literal>0</literal>,
              Target <literal>6</literal>, LUN <literal>0</literal>.
              <programlisting>
[scsi c0t6d0]
"Device" = "/dev/sgi"
              </programlisting>
              Yours will vary with your particular SCSI setup.
            </para>
          </listitem>
        </orderedlist>
      </sect2>

      <sect2>
        <title>General Information</title>
        <para>
          The mustek scanner I have was shipped with a package
          "ipplus". This program uses the TWAIN driver specification
          to access scanners.
        </para>
        <para>
          (TWAIN MANAGER)
        </para>
        <para>
          <programlisting>
ipplus.exe &lt;-&gt; (TWAIN INTERFACE) &lt;-&gt; (TWAIN DATA SOURCE.ASPI) -&gt; WINASPI
          </programlisting>
        </para>
      </sect2>

      <sect2>
        <title>NOTES/BUGS</title>
        <para>
          The biggest is that it only works under Linux at the moment.
        </para>
        <para>
          The ASPI code has only been tested with:
        </para>
        <itemizedlist>
          <listitem>
            <para>
              a Mustek 800SP with a Buslogic controller under Linux [BM]
            </para>
          </listitem>
          <listitem>
            <para>
              a Siemens Nixdorf 9036 with Adaptec AVA-1505 under Linux
              accessed via DOSASPI. Note that I had color problems,
              though (barely readable result) [AM]
            </para>
          </listitem>
          <listitem>
            <para>
              a Fujitsu M2513A MO drive (640MB) using generic SCSI
              drivers. Formatting and ejecting worked perfectly.
              Thanks to Uwe Bonnes for access to the hardware ! [AM]
            </para>
          </listitem>
        </itemizedlist>
        <para>
          I make no warranty to the ASPI code. It makes my scanner
          work. Your devices may explode. I have no way of determining
          this. I take zero responsibility!
        </para>
      </sect2>
    </sect1>

</chapter>

<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-parent-document:("wine-doc.sgml" "set" "book" "chapter" "")
End:
-->